diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb')
| -rw-r--r-- | resources/libraries/robot/honeycomb/nat.robot | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/nat.robot b/resources/libraries/robot/honeycomb/nat.robot new file mode 100644 index 0000000000..af24d56e37 --- /dev/null +++ b/resources/libraries/robot/honeycomb/nat.robot @@ -0,0 +1,174 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords +| Library | resources.libraries.python.honeycomb.NAT.NATKeywords +| Library | resources.libraries.python.NAT.NATUtil +| Documentation | Keywords used to test Honeycomb NAT node. + +*** Keywords *** +| NAT configuration from Honeycomb should be empty +| | [Documentation] | Uses Honeycomb API to retrieve NAT operational data\ +| | ... | and expects to find only default values. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - default_settings - NAT default settings. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT configuration from Honeycomb should be empty \ +| | ... | \| ${nodes['DUT1']} \| ${default_settings} \| +| | [Arguments] | ${node} | ${default_settings} +| | ${data}= | Get NAT Oper data | ${node} +| | Compare data structures | ${data} | ${default_settings} + +| Honeycomb configures NAT entry +| | [Documentation] | Uses Honeycomb API to configure a static NAT entry. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - data - NAT entry to configure. Type: dictionary +| | ... | - instance - NAT instance on VPP node. Type: integer +| | ... | - index - Index of NAT entry. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb configures NAT entry \| ${nodes['DUT1']} \| ${data} \ +| | ... | \| ${0} \| ${1} \| +| | [Arguments] | ${node} | ${data} | ${instance}=0 | ${index}=1 +| | Configure NAT entries | ${node} | ${data} | ${instance} | ${index} + +| NAT entries from Honeycomb should be +| | [Documentation] | Uses Honeycomb API to retrieve NAT operational data\ +| | ... | and compares against expected settings. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - settings - NAT entry to expect. Type: dictionary +| | ... | - instance - NAT instance on VPP node. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT entries from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| ${0} \| +| | [Arguments] | ${node} | ${settings} | ${instance}=0 +| | ${data}= | Get NAT Oper data | ${node} +| | ${data}= | Set Variable +| | ... | ${data['nat-instances']['nat-instance'][${instance}]['mapping-table']} +| | Compare data structures | ${data} | ${settings} + +| NAT entries from VAT should be +| | [Documentation] | Uses VPP test API to retrieve NAT entries\ +| | ... | and compares against expected settings. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - settings - NAT entry to expect. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT entries from VAT should be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| +| | [Arguments] | ${node} | ${settings} +| | ${data}= | VPP get NAT static mappings | ${node} +| | Compare data structures | ${data} | ${settings} + +| Honeycomb configures NAT on interface +| | [Documentation] | Uses Honeycomb API to configure NAT on an interface. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the node. Type: string +| | ... | - direction - NAT direction parameter, inbound or outbound.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb configures NAT on interface \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| outbound \| +| | [Arguments] | ${node} | ${interface} | ${direction} +| | Configure NAT on interface +| | ... | ${node} | ${interface} | ${direction} + +| Honeycomb removes NAT interface configuration +| | [Documentation] | Uses Honeycomb API to remove an existing NAT interface\ +| | ... | configuration. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the node. Type: string +| | ... | - direction - NAT direction parameter, inbound or outbound.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes NAT interface configuration \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| outbound \| +| | [Arguments] | ${node} | ${interface} | ${direction} +| | Configure NAT on interface +| | ... | ${node} | ${interface} | ${direction} | ${True} + +| NAT interface configuration from Honeycomb should be +| | [Documentation] | Uses Honeycomb API to retrieve interface operational data\ +| | ... | and compares the NAT section against expected settings. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the node. Type: string +| | ... | - direction - NAT direction parameter, inbound or outbound.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT interface configuration from Honeycomb should be \ +| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| outbound \| +| | [Arguments] | ${node} | ${interface} | ${direction} +| | ${data}= | Get interface oper data | ${node} | ${interface} +| | Variable should exist | ${data['interface-nat:nat']['${direction}']} + +| NAT interface configuration from Honeycomb should be empty +| | [Documentation] | Uses Honeycomb API to retrieve interface operational data\ +| | ... | and expects to find no data for the given direction. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the node. Type: string +| | ... | - direction - NAT direction parameter, inbound or outbound.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT interface configuration from Honeycomb should be empty \ +| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| outbound \| +| | [Arguments] | ${node} | ${interface} | ${direction} +| | ${data}= | Get interface oper data | ${node} | ${interface} +| | Variable should not exist | ${data['interface-nat:nat']['${direction}']} + +| NAT interface configuration from VAT should be +| | [Documentation] | Uses Honeycomb API to retrieve NAT configured interfaces\ +| | ... | and compares with expected settings. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - settings - settings to expect. Type: dictionary +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| NAT interface configuration from VAT should be \ +| | ... | \| ${nodes['DUT1']} \| ${settings} \| +| | [Arguments] | ${node} | ${settings} +| | ${data}= | VPP get NAT interfaces | ${node} +| | Compare data structures | ${data[0]} | ${settings} |