diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb')
| -rw-r--r-- | resources/libraries/robot/honeycomb/lisp.robot | 324 |
1 files changed, 324 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/lisp.robot b/resources/libraries/robot/honeycomb/lisp.robot new file mode 100644 index 0000000000..f490769c6f --- /dev/null +++ b/resources/libraries/robot/honeycomb/lisp.robot @@ -0,0 +1,324 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.Lisp.LispKeywords +| Library | resources.libraries.python.LispUtil +| Documentation | Keywords used to test Honeycomb Lisp features. + +*** Keywords *** +| Honeycomb enables Lisp +| | [Documentation] | Uses Honeycomb API to enable Lisp. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb enables Lisp \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | ... +| | Set Lisp state | ${node} | enable + +| Honeycomb adds locator set +| | [Documentation] | Uses Honeycomb API to enable Lisp. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - interface - Name of an interface on the node. Type: string +| | ... | - locator_set - Name for the new locator set. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb enables Lisp \| ${nodes['DUT1']} \| GigabitEthernet0/8/0\ +| | ... | \| loc_01 \| +| | [Arguments] | ${node} | ${interface} | ${locator_set} +| | Add locator | ${node} | ${interface} | ${locator_set} + +| Honeycomb adds Lisp mapping +| | [Documentation] | Uses Honeycomb API to configure a Lisp mapping. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - data - Lisp settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb adds Lisp mapping \| ${nodes['DUT1']} \| ${data} \| +| | [Arguments] | ${node} | ${data} +| | Configure lisp mapping | ${node} | ${data} + +| Honeycomb removes all Lisp mappings +| | [Documentation] | Uses Honeycomb API to clear the eid-table. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb removes all Lisp mappings \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Configure lisp mapping | ${node} | ${NONE} + +| Lisp should not be configured +| | [Documentation] | Retrieves Lisp configuration from Honeycomb operational\ +| | ... | data, and expects an empty dictionary. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Lisp should not be configured \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | ... +| | ${data}= | Get Lisp operational data | ${node} +| | Should be equal as strings | ${data['lisp-state']['enable']} | False +| | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} +| | Should match | ${data['pitr-cfg']['locator-set']} | N/A +| | Variable should not exist | ${data['eid-table']['vni-table'][0]} + +| Lisp state From Honeycomb Should Be +| | [Documentation] | Retrieves Lisp state from Honeycomb operational\ +| | ... | data, and compares Lisp state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected Lisp state. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Lisp state From Honeycomb Should Be \| ${nodes['DUT1']} \ +| | ... | \| enabled \| +| | [Arguments] | ${node} | ${state} +| | ${data}= | Get Lisp operational data | ${node} +| | Run keyword if | $state == 'enabled' +| | ... | Should be equal as strings +| | ... | ${data['lisp-state']['enable']} | ${True} +| | Run keyword if | $state == 'disabled' +| | ... | Should be equal as strings +| | ... | ${data['lisp-state']['enable']} | ${False} + +| Lisp state From VAT Should Be +| | [Documentation] | Retrieves Lisp state from VAT,\ +| | ... | and compares Lisp state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected Lisp state. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Lisp state From VAT Should Be \| ${nodes['DUT1']} \| enabled \| +| | [Arguments] | ${node} | ${state} +| | ${status}= | VPP show Lisp State | ${node} +| | Should match | ${status['feature_status']} | ${state} + +| Lisp mapping From Honeycomb Should Be +| | [Documentation] | Retrieves Lisp mapping from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - settings - Expected Lisp mapping data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Lisp mapping From Honeycomb Should Be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| +| | [Arguments] | ${node} | ${settings} +| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} +| | ${data}= | Set Variable | ${data['eid-table']['vni-table'][0]} +| | Compare data structures | ${data} | ${settings} + +| Lisp mapping From VAT Should Be +| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | ... | and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - settings - Expected Lisp mapping data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Lisp mapping From VAT Should Be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| +| | [Arguments] | ${node} | ${settings} +| | ${data}= | VPP show Lisp eid table | ${node} +| | Compare data structures | ${data[0]} | ${settings} + +| Lisp mappings from Honeycomb should not exist +| | [Documentation] | Retrieves Lisp mappings from operational\ +| | ... | data, and expects to find none. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Lisp mappings from Honeycomb should not exist \ +| | ... | \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} +| | Should be empty | ${data['eid-table']['vni-table']} + +| Lisp mappings from VAT should not exist +| | [Documentation] | Retrieves Lisp mappings from VAT,\ +| | ... | and expects to receive an empty list. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Lisp mappings from VAT should not exist \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | ${data}= | VPP show Lisp eid table | ${node} +| | Should be empty | ${data} + +| Locator set from Honeycomb should be +| | [Documentation] | Retrieves Lisp locator set from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - interface - Interface that should be referenced by locator.\ +| | ... | Type: dictionary +| | ... | - locator_set - Expected locator set name. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Locator set From Honeycomb Should Be \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| loc01 \| +| | [Arguments] | ${node} | ${interface} | ${locator_set} +| | ${data}= | Get Lisp operational data | ${node} +| | ${loc_data}= | Set Variable +| | ... | ${data['lisp-state']['lisp-feature-data']['locator-sets']} +| | Should be equal +| | ... | ${loc_data['locator-set'][0]['name']} +| | ... | ${locator_set} +| | Should be equal +| | ... | ${loc_data['locator-set'][0]['interface'][0]['interface-ref']} +| | ... | ${interface} + +| Honeycomb adds Lisp adjacency +| | [Documentation] | Uses Honeycomb API to configure Lisp adjacency. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - vni - Virtual network identifier number. Type: integer +| | ... | - map - Name of an existing remote mapping. Type: string +| | ... | - adjacency - Name for the new adjacency. Type: string +| | ... | - data - Lisp adjacency settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb adds Lisp adjacency \| ${nodes['DUT1']} \| ${1} \| map1\ +| | ... | \| adj1 \| ${data} \| +| | [Arguments] | ${node} | ${vni} | ${map} | ${adjacency} | ${data} +| | Add Lisp adjacency +| | ... | ${node} | ${vni} | ${map} | ${adjacency} | ${data} + +| Honeycomb adds Lisp Map resolver +| | [Documentation] | Uses Honeycomb API to configure Lisp map resolver. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - ip_address - IP address for the map resolver. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb adds Lisp Map resolver \| ${nodes['DUT1']} \ +| | ... | \| 192.168.0.2 \| +| | [Arguments] | ${node} | ${ip_address} +| | Add map resolver | ${node} | ${ip_address} + +| Map resolver from Honeycomb should be +| | [Documentation] | Retrieves Lisp map resolver from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - ip_address - IP address that should be referenced in map resolver.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Map resolver From Honeycomb Should Be \| ${nodes['DUT1']} \ +| | ... | \| 192.168.1.2 \| +| | [Arguments] | ${node} | ${ip_address} +| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} +| | ${data}= | Set Variable | ${data['map-resolvers']['map-resolver'][0]} +| | Should be equal | ${data['ip-address']} | ${ip_address} + +| Map resolver from VAT should be +| | [Documentation] | Retrieves Lisp mapping from VAT,\ +| | ... | and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - ip_address - IP address that should be referenced in map resolver.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Map resolver From VAT Should Be \| ${nodes['DUT1']} \ +| | ... | \| 192.168.1.2 \| +| | [Arguments] | ${node} | ${ip_address} +| | ${data}= | Vpp show Lisp map resolver | ${node} +| | Should be equal | ${data[0]['map resolver']} | ${ip_address} + +| Honeycomb enables Lisp PITR feature +| | [Documentation] | Uses Honeycomb API to configure Lisp PITR feature. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - locator_set - Name of an existing locator set. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb enables Lisp PITR feature \| ${nodes['DUT1']} \| loc1 \| +| | [Arguments] | ${node} | ${locator_set} +| | Configure PITR | ${node} | ${locator_set} + +| PITR config from Honeycomb should be +| | [Documentation] | Retrieves PITR config from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - locator_set - Name of locator set that should be referenced\ +| | ... | in PITR config. Type: string +| | ... +| | ... | *Example:* +| | ... | \| PITR config from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| loc01 \| +| | [Arguments] | ${node} | ${locator_set} +| | ${data}= | Get Lisp operational data | ${node} +| | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} +| | ${data}= | Set Variable | ${data['pitr-cfg']} +| | Should be equal | ${data['locator-set']} | ${locator_set} + +| PITR config from VAT should be +| | [Documentation] | Retrieves PITR config from VAT,\ +| | ... | and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - locator_set - Name of locator set that should be referenced\ +| | ... | in PITR config. Type: string +| | ... +| | ... | *Example:* +| | ... | \| PITR config from VAT should be \| ${nodes['DUT1']} \ +| | ... | \| loc01 \| +| | [Arguments] | ${node} | ${locator_set} +| | ${data}= | VPP show Lisp PITR | ${node} +| | Should be equal | ${data['status']} | enabled +| | Should be equal | ${data['locator_set']} | ${locator_set} + +| Honeycomb disables all Lisp features +| | [Documentation] | Uses Honeycomb API to remove all Lisp configuration. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb disables all Lisp features \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Disable Lisp | ${node}
\ No newline at end of file |