aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/honeycomb
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/honeycomb')
-rw-r--r--resources/libraries/robot/honeycomb/honeycomb.robot59
-rw-r--r--resources/libraries/robot/honeycomb/interfaces.robot76
2 files changed, 135 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot
new file mode 100644
index 0000000000..741807877d
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/honeycomb.robot
@@ -0,0 +1,59 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources/libraries/python/HoneycombSetup.py
+| Library | resources/libraries/python/HoneycombUtil.py
+| Library | resources/libraries/python/HTTPRequest.py
+
+*** Keywords ***
+| Setup Honeycomb service on DUTs
+| | [Documentation] | *Setup environment for honeycomb testing*
+| | ...
+| | ... | _Setup steps:_
+| | ... | - 1. Login to each honeycomb node using ssh
+| | ... | - 2. Startup honeycomb service
+| | ... | - 3. Monitor service startup using HTTP GET request loop
+| | ... | Expected sequence of HTTP replies:
+| | ... | connection refused -> 404 -> 401 -> 503 or 500 -> 200 (pass)
+| | ... | - 4. Configure honeycomb nodes using HTTP PUT request
+| | ...
+| | ... | _Used global constants and variables:_
+| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
+| | ... | - HTTPCodes - HTTP protocol status codes
+| | ... | - ${nodes} - dictionary of all nodes in topology.YAML file
+| | ...
+| | [Arguments] | @{duts}
+| | Start honeycomb on DUTs | @{duts}
+| | Wait until keyword succeeds | 4min | 20sec
+| | ... | Check honeycomb startup state | @{duts}
+
+| Stop honeycomb service on DUTs
+| | [Documentation] | *Cleanup environment after honeycomb testing*
+| | ...
+| | ... | _Teardown steps:_
+| | ... | - 1. Login to each honeycomb node using ssh
+| | ... | - 2. Stop honeycomb service
+| | ... | - 3. Monitor service shutdown using HTTP GET request loop
+| | ... | Expected sequence of HTTP replies:
+| | ... | 200 -> 404 -> connection refused (pass)
+| | ...
+| | ... | _Used global constants and variables:_
+| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
+| | ... | - HTTPCodes - HTTP protocol status codes
+| | ... | - ${nodes} - dictionary of all nodes in topology.YAML file
+| | ...
+| | [Arguments] | @{duts}
+| | Stop honeycomb on DUTs | @{duts}
+| | Wait until keyword succeeds | 2m | 10s
+| | ... | Check honeycomb shutdown state | @{duts}
diff --git a/resources/libraries/robot/honeycomb/interfaces.robot b/resources/libraries/robot/honeycomb/interfaces.robot
new file mode 100644
index 0000000000..338c3cfc24
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/interfaces.robot
@@ -0,0 +1,76 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources/libraries/python/HoneycombUtil.py
+| Library | resources.libraries.python.InterfaceUtil
+| ... | WITH NAME | InterfaceCLI
+| Library | resources.libraries.python.HoneycombAPIKeywords.InterfaceKeywords
+| ... | WITH NAME | interfaceAPI
+
+*** Keywords ***
+| Honeycomb sets interface state
+| | [Arguments] | ${node} | ${interface} | ${state}
+| | [Documentation] | Uses Honeycomb API to change the admin state
+| | ... | of the specified interface.
+| | ...
+| | ... | *Arguments:*
+| | ... | - state - state to set on interface
+| | ... | - node - dictionary of information about a DUT node
+| | ... | - interface - name of an interface on the specified node
+| | ...
+| | interfaceAPI.Set interface state | ${node} | ${interface} | ${state}
+
+| Interface state from Honeycomb should be
+| | [Arguments] | ${node} | ${interface} | ${state}
+| | [Documentation] | Retrieves interface admin state through Honeycomb and
+| | ... | compares with state supplied in argument
+| | ...
+| | ... | *Arguments:*
+| | ... | - state - expected interface state
+| | ... | - node - dictionary of information about a DUT node
+| | ... | - interface - name of an interface on the specified node
+| | ...
+| | ${api_data}= | interfaceAPI.Get interface oper info | ${node} | ${interface}
+| | ${api_state}= | Set Variable | ${api_data['admin-status']}
+| | Should be equal | ${api_state} | ${state}
+
+| Interface state from VAT should be
+| | [Arguments] | ${node} | ${interface} | ${state}
+| | [Documentation] | Retrieves interface admin state through VAT and compares
+| | ... | with state supplied in argument
+| | ...
+| | ... | *Arguments:*
+| | ... | - state - expected interface state
+| | ... | - node - dictionary of information about a DUT node
+| | ... | - interface - name of an interface on the specified node
+| | ...
+| | ... | _NOTE:_ Vat returns state as int (1/0) instead of string (up/down).
+| | ... | This keyword also handles translation.
+| | ...
+| | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface}
+| | ${vat_state}= | Set Variable if
+| | ... | ${vat_data['admin_up_down']} == 1 | up | down
+| | Should be equal | ${vat_state} | ${state}
+
+| Interface state is
+| | [Arguments] | ${node} | ${interface} | ${state}
+| | [Documentation] | Uses VPP binary API to ensure that the interface under
+| | ... | test is in the specified admin state.
+| | ...
+| | ... | *Arguments:*
+| | ... | - state - state to set on interface
+| | ... | - node - dictionary of information about a DUT node
+| | ... | - interface - name of an interface on the specified node
+| | ...
+| | interfaceAPI.Set interface state | ${node} | ${interface} | ${state}