diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb')
| -rw-r--r-- | resources/libraries/robot/honeycomb/honeycomb.robot | 12 | ||||
| -rw-r--r-- | resources/libraries/robot/honeycomb/persistence.robot | 226 |
2 files changed, 238 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot index ee8cfbc408..c04bd23a57 100644 --- a/resources/libraries/robot/honeycomb/honeycomb.robot +++ b/resources/libraries/robot/honeycomb/honeycomb.robot @@ -60,3 +60,15 @@ | | Stop honeycomb on DUTs | @{duts} | | Wait until keyword succeeds | 2m | 10s | | ... | Check honeycomb shutdown state | @{duts} + +| Clear persisted Honeycomb configuration +| | [Documentation] | *Delete saved configuration.* +| | ... +| | ... | *Arguments:* +| | ... | - duts - one or more nodes to clear persistence on. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Clear persisted Honeycomb configuration \| ${nodes['DUT1']} \| +| | [Arguments] | @{duts} +| | Clear persisted Honeycomb config | @{duts}
\ No newline at end of file diff --git a/resources/libraries/robot/honeycomb/persistence.robot b/resources/libraries/robot/honeycomb/persistence.robot new file mode 100644 index 0000000000..1c23915aca --- /dev/null +++ b/resources/libraries/robot/honeycomb/persistence.robot @@ -0,0 +1,226 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords +| ... | WITH NAME | InterfaceAPI +| Library | resources.libraries.python.honeycomb.HcPersistence +| Resource | resources/libraries/robot/honeycomb/honeycomb.robot +| Resource | resources/libraries/robot/honeycomb/interfaces.robot +| Resource | resources/libraries/robot/honeycomb/vxlan.robot +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Resource | resources/libraries/robot/honeycomb/tap.robot +| Resource | resources/libraries/robot/honeycomb/vhost_user.robot +| Resource | resources/libraries/robot/honeycomb/sub_interface.robot +| Variables | tests/suites/honeycomb/resources/persistence.py | ${interface} +| Documentation | Keywords used to test Honeycomb persistence. + +*** Keywords *** +| Honeycomb is restarted +| | [Documentation] | Restarts Honeycomb without clearing persistence data. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb is restarted \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Stop Honeycomb service on DUTs | ${node} +| | Setup Honeycomb service on DUTs | ${node} + +| VPP is restarted +| | [Documentation] | Restarts VPP and waits until it reconnects with Honeycomb. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| VPP is restarted \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Setup DUT | ${node} +| | Check VPP connection | ${node} + +| Check VPP connection +| | [Documentation] | Checks if Honeycomb is connected to VPP by reading VPP\ +| | ... | version number from Honeycomb operational data. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Check VPP connection \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Wait until keyword succeeds | 2min | 20sec +| | ... | Check Honeycomb startup state | ${node} + +| Honeycomb and VPP are restarted +| | [Documentation] | Stops Honeycomb, restarts VPP and then starts Honeycomb\ +| | ... | again. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb and VPP are restarted \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Stop Honeycomb service on DUTs | ${node} +| | Setup DUT | ${node} +| | Setup Honeycomb service on DUTs | ${node} + +| Honeycomb configures every setting +| | [Documentation] | Uses Honeycomb to set basic settings for VxLAN,\ +| | ... | bridge domains, TAP, vhost-user and VLAN. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb configures every setting \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | Honeycomb sets interface VxLAN configuration +| | ... | ${node} | ${vx_interface} | ${vxlan_settings} +| | Honeycomb creates first l2 bridge domain +| | ... | ${node} | ${bd_name} | ${bd_settings} +| | Honeycomb creates TAP interface +| | ... | ${node} | ${tap_interface} | ${tap_settings} +| | Honeycomb creates vhost-user interface +| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} +| | Honeycomb creates sub-interface +| | ... | ${node} | ${interface} | ${sub_interface_id} +| | ... | ${sub_interface_base_settings} | ${sub_interface_settings} +| | Honeycomb sets interface state | ${node} | ${interface} | up +| | VxLAN configuration from Honeycomb should be +| | ... | ${node} | ${vx_interface} | ${vxlan_settings} +| | VxLAN configuration from VAT should be +| | ... | ${node} | ${vxlan_settings} +| | Bridge domain configuration from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${bd_settings} +| | Bridge domain configuration from VAT should be +| | ... | ${node} | ${0} | ${bd_settings} +| | TAP configuration from Honeycomb should be +| | ... | ${node} | ${tap_interface} | ${tap_settings} +| | TAP configuration from VAT should be +| | ... | ${node} | ${tap_interface} | ${tap_settings} +| | Sub-interface configuration from Honeycomb should be +| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings} +| | ... | ${sub_interface_settings} +| | Sub-interface configuration from VAT should be +| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings} +| | Interface state from Honeycomb should be | ${node} | ${interface} | up +| | Interface state from VAT should be | ${node} | ${interface} | up + +| Honeycomb and VPP should verify every setting +| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\ +| | ... | bridge domains, TAP, vhost-user and VLAN. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb and VPP should verify every setting \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | VxLAN configuration from Honeycomb should be +| | ... | ${node} | ${vx_interface} | ${vxlan_settings} +| | VxLAN configuration from VAT should be +| | ... | ${node} | ${vxlan_settings} +| | Bridge domain configuration from Honeycomb should be +| | ... | ${node} | ${bd_name} | ${bd_settings} +| | Bridge domain configuration from VAT should be +| | ... | ${node} | ${0} | ${bd_settings} +| | TAP configuration from Honeycomb should be +| | ... | ${node} | ${tap_interface} | ${tap_settings} +| | TAP configuration from VAT should be +| | ... | ${node} | ${tap_interface} | ${tap_settings} +| | Vhost-user configuration from Honeycomb should be +| | ... | ${node} | ${vhost_interface} | ${vhost_user_server} +| | Vhost-user configuration from VAT should be +| | ... | ${node} | ${vhost_user_server} +| | Sub-interface configuration from Honeycomb should be +| | ... | ${node} | ${sub_interface_name} | ${sub_interface_base_settings} +| | ... | ${sub_interface_settings} +| | Sub-interface configuration from VAT should be +| | ... | ${node} | ${sub_interface_name} | ${sub_interface_settings} +| | Interface state from Honeycomb should be | ${node} | ${interface} | up +| | Interface state from VAT should be | ${node} | ${interface} | up + +| Honeycomb and VPP should have default configuration +| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\ +| | ... | bridge domains, TAP, vhost-user and VLAN. Expects default\ +| | ... | configuration. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb and VPP should have default configuration \| +| | ... | ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | VxLAN configuration from Honeycomb should be empty +| | ... | ${node} | ${vx_interface} +| | VxLAN configuration from VAT should be empty | ${node} +| | Honeycomb should show no bridge domains | ${node} +| | VAT should show no bridge domains | ${node} +| | TAP configuration from Honeycomb should be empty +| | ... | ${node} | ${tap_interface} +| | TAP configuration from VAT should be empty +| | ... | ${node} | ${tap_interface} +| | Vhost-user configuration from Honeycomb should be empty +| | ... | ${node} | ${vhost_interface} +| | Vhost-user configuration from VAT should be empty +| | ... | ${node} +| | Sub-interface configuration from Honeycomb should be empty +| | ... | ${node} | ${sub_interface_name} +| | Sub-interface configuration from VAT should be empty +| | ... | ${node} | ${sub_interface_name} + +| Honeycomb should show no rogue interfaces +| | [Documentation] | Checks if operational data contains interfaces not\ +| | ... | present in configuration and vice versa. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb should show no rogue interfaces \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | ${data_conf}= | InterfaceAPI.Get all interfaces cfg data | ${node} +| | ${data_oper}= | InterfaceAPI.Get all interfaces oper data | ${node} +| | Compare interface lists | ${data_conf} | ${data_oper} + +| Persistence file is damaged during restart +| | [Documentation] | Shuts down Honeycomb, modifies persistence files to\ +| | ... | simulate damage, then restarts VPP and starts up Honeycomb again. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Persistence file is damaged during restart \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Stop Honeycomb service on DUTs | ${node} +| | Modify persistence files | ${node} | { | abc +| | Setup DUT | ${node} +| | Setup Honeycomb service on DUTs | ${node}
\ No newline at end of file |