diff options
Diffstat (limited to 'resources/libraries/robot/ip')
| -rw-r--r-- | resources/libraries/robot/ip/ip4.robot | 28 | ||||
| -rw-r--r-- | resources/libraries/robot/ip/ip6.robot | 28 |
2 files changed, 28 insertions, 28 deletions
diff --git a/resources/libraries/robot/ip/ip4.robot b/resources/libraries/robot/ip/ip4.robot index 02025156e2..def7d3212c 100644 --- a/resources/libraries/robot/ip/ip4.robot +++ b/resources/libraries/robot/ip/ip4.robot @@ -175,7 +175,7 @@ | | Run Traffic Script On Node | send_icmp_wait_for_reply.py | | ... | ${tg_node} | ${args} -| Initialize IPv4 forwarding in circular topology +| Configure IPv4 forwarding in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node | | ... | circular topology. Get the interface MAC addresses and setup ARP on @@ -203,16 +203,16 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \| -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \ | | ... | \| remote_host1_ip4=192.168.0.1 \| remote_host2_ip4=192.168.0.2 \ | | ... | \| remote_host_ip4_prefix=32 \| -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| remote_host1_ip4=192.168.0.1 \ | | ... | \| remote_host2_ip4=192.168.0.2 \| remote_host_ip4_prefix=32 \| @@ -222,24 +222,24 @@ | | ... | ${remote_host1_ip4}=${NONE} | ${remote_host2_ip4}=${NONE} | | ... | ${remote_host_ip4_prefix}=${NONE} | | ... -| | Set interfaces in path up +| | Configure interfaces in path up | | ... | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2_node} | | ... | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize IPv4 forwarding in 3-node circular topology +| | ... | Configure IPv4 forwarding in 3-node circular topology | | ... | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | ${dut1_if2_ip4} | | ... | ${dut2_if1_ip4} | ${dut2_if2_ip4} | ${remote_host1_ip4} | | ... | ${remote_host2_ip4} | ${remote_host_ip4_prefix} | | ... | ELSE -| | ... | Initialize IPv4 forwarding in 2-node circular topology +| | ... | Configure IPv4 forwarding in 2-node circular topology | | ... | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | ${dut1_if2_ip4} | | ... | remote_host1_ip4=${remote_host1_ip4} | | ... | remote_host2_ip4=${remote_host2_ip4} | | ... | remote_host_ip4_prefix=${remote_host_ip4_prefix} -| Initialize IPv4 forwarding in 2-node circular topology +| Configure IPv4 forwarding in 2-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces on DUT node in 2-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on @@ -261,9 +261,9 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \| -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \ | | ... | \| 192.168.0.1 \| 192.168.0.2 \| 32 \| | | ... @@ -290,7 +290,7 @@ | | ... | Vpp Route Add | ${dut_node} | ${remote_host2_ip4} | | ... | ${remote_host_ip4_prefix} | ${tg_if2_ip4} | ${dut_to_tg_if2} -| Initialize IPv4 forwarding in 3-node circular topology +| Configure IPv4 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP @@ -316,10 +316,10 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| -| | ... | \| Initialize IPv4 forwarding in circular topology \ +| | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| 192.168.0.1 \| 192.168.0.2 \| 32 \| | | ... diff --git a/resources/libraries/robot/ip/ip6.robot b/resources/libraries/robot/ip/ip6.robot index f3e31b957b..b547e7d147 100644 --- a/resources/libraries/robot/ip/ip6.robot +++ b/resources/libraries/robot/ip/ip6.robot @@ -209,7 +209,7 @@ | | | Vpp Route Add | ${dut1} | ${net} | ${prefix} | ${dut2_if_addr} | | | ... | ${dut1_if} -| Initialize IPv6 forwarding in circular topology +| Configure IPv6 forwarding in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node | | ... | circular topology. Get the interface MAC addresses and setup ARP on @@ -237,16 +237,16 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2001:2::1 \| -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2001:2::1 \ | | ... | \| remote_host1_ip6=3ffe:5f::1 \| remote_host2_ip6=3ffe:5f::2 \ | | ... | \| remote_host_ip6_prefix=128 \| -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2003:3::1 \| 2003:3::2 \ | | ... | \| 2001:2::1 \| -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2003:3::1 \| 2003:3::2 \ | | ... | \| 2001:2::1 \| remote_host1_ip4=3ffe:5f::1 \ | | ... | \| remote_host2_ip4=3ffe:5f::2 \| remote_host_ip4_prefix=128 \| @@ -257,24 +257,24 @@ | | ... | ${remote_host_ip6_prefix}=${NONE} | | ... | | ... -| | Set interfaces in path up +| | Configure interfaces in path up | | ... | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2_node} | | ... | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize IPv6 forwarding in 3-node circular topology +| | ... | Configure IPv6 forwarding in 3-node circular topology | | ... | ${tg_if1_ip6} | ${tg_if2_ip6} | ${dut1_if1_ip6} | ${dut1_if2_ip6} | | ... | ${dut2_if1_ip6} | ${dut2_if2_ip6} | ${remote_host1_ip6} | | ... | ${remote_host2_ip6} | ${remote_host_ip6_prefix} | | ... | ELSE -| | ... | Initialize IPv6 forwarding in 2-node circular topology +| | ... | Configure IPv6 forwarding in 2-node circular topology | | ... | ${tg_if1_ip6} | ${tg_if2_ip6} | ${dut1_if1_ip6} | ${dut1_if2_ip6} | | ... | remote_host1_ip6=${remote_host1_ip6} | | ... | remote_host2_ip6=${remote_host2_ip6} | | ... | remote_host_ip6_prefix=${remote_host_ip6_prefix} -| Initialize IPv6 forwarding in 2-node circular topology +| Configure IPv6 forwarding in 2-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces on DUT node in 2-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on @@ -296,9 +296,9 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2001:2::1 \| -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2001:2::1 \ | | ... | \| remote_host1_ip6=3ffe:5f::1 \| remote_host2_ip6=3ffe:5f::2 \ | | ... | \| remote_host_ip6_prefix=128 \| @@ -326,7 +326,7 @@ | | ... | Vpp Route Add | ${dut_node} | ${remote_host2_ip6} | | ... | ${remote_host_ip6_prefix} | ${tg_if2_ip6} | ${dut_to_tg_if2} -| Initialize IPv6 forwarding in 3-node circular topology +| Configure IPv6 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP @@ -352,10 +352,10 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2003:3::1 \| 2003:3::2 \ | | ... | \| 2001:2::1 \| -| | ... | \| Initialize IPv6 forwarding in circular topology \ +| | ... | \| Configure IPv6 forwarding in circular topology \ | | ... | \| 2001:1::2 \| 2001:2::2 \| 2001:1::1 \| 2003:3::1 \| 2003:3::2 \ | | ... | \| 2001:2::1 \| remote_host1_ip4=3ffe:5f::1 \ | | ... | \| remote_host2_ip4=3ffe:5f::2 \| remote_host_ip4_prefix=128 \| |