aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/ip
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/ip')
-rw-r--r--resources/libraries/robot/ip/ip6.robot86
-rw-r--r--resources/libraries/robot/ip/nat.robot58
2 files changed, 143 insertions, 1 deletions
diff --git a/resources/libraries/robot/ip/ip6.robot b/resources/libraries/robot/ip/ip6.robot
index 9c50fb4812..c4ef0b7c1f 100644
--- a/resources/libraries/robot/ip/ip6.robot
+++ b/resources/libraries/robot/ip/ip6.robot
@@ -221,3 +221,89 @@
| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1}
| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1
| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2}
+
+| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node
+| | ... | circular topology. In case of 3-node topology create VLAN
+| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN
+| | ... | sub-interface on dut1-if2 interface. Get the interface MAC addresses
+| | ... | and setup ARPs. Setup IPv6 addresses with /64 prefix on DUT-TG links
+| | ... | and set routing with prefix /64. In case of 3-node set IPv6 adresses
+| | ... | with /64 prefix on VLAN and set routing on both DUT nodes with prefix
+| | ... | /64. Set next hop of neighbour DUT interface IPv6 address. All
+| | ... | interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - tg_if1_net - TG interface 1 IPv6 subnet used by traffic generator.
+| | ... | Type: integer
+| | ... | - tg_if2_net - TG interface 2 IPv6 subnet used by traffic generator.
+| | ... | Type: integer
+| | ... | - subid - ID of the sub-interface to be created. Type: string
+| | ... | - tag_rewrite - Method of tag rewrite. Type: string
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - dut1 - DUT1 node.
+| | ... | - dut2 - DUT2 node.
+| | ... | - dut1_if2 - DUT1 interface towards DUT2.
+| | ... | - dut2_if1 - DUT2 interface towards DUT1.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize IPv6 forwarding with VLAN dot1q sub-interfaces\
+| | ... | in circular topology \| 2001:1::0 \| 2001:2::0 \| 10 \| pop-1 \|
+| | ...
+| | [Arguments] | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
+| | ...
+| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${dut2}
+| | ...
+| | Set interfaces in path up
+| | ...
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Initialize VLAN dot1q sub-interfaces in circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
+| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology
+| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Configure L2 tag rewrite method on interfaces | ${dut1}
+| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
+| | ... | ELSE | Configure L2 tag rewrite method on interfaces
+| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
+| | ...
+| | ${prefix}= | Set Variable | 64
+| | ${host_prefix}= | Set Variable | 64
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add Ip Neighbor
+| | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add Ip Neighbor
+| | ... | ${dut2} | ${subif_index_2} | 2002:2::1 | ${dut1_if2_mac}
+| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2}
+| | ... | ELSE | Set Variable | ${dut1}
+| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2_if2}
+| | ... | ELSE | Set Variable | ${subif_index_1}
+| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac}
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1
+| | ... | ${prefix}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2
+| | ... | ${prefix}
+| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix}
+| | Vpp All Ra Suppress Link Layer | ${nodes}
+| | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix}
+| | ... | gateway=2002:1::1 | interface=${dut1_if1}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut1} | ${tg_if2_net} | ${host_prefix}
+| | ... | gateway=2002:2::2 | interface=${subif_index_1}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut2} | ${tg_if1_net} | ${host_prefix}
+| | ... | gateway=2002:2::1 | interface=${subif_index_2}
+| | Vpp Route Add | ${dut} | ${tg_if2_net} | ${host_prefix}
+| | ... | gateway=2002:3::1 | interface=${dut_if2}
+
diff --git a/resources/libraries/robot/ip/nat.robot b/resources/libraries/robot/ip/nat.robot
index ff3d5bac08..bff8b27dbf 100644
--- a/resources/libraries/robot/ip/nat.robot
+++ b/resources/libraries/robot/ip/nat.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -13,6 +13,7 @@
*** Settings ***
| Library | resources.libraries.python.NATUtil
+| ...
| Documentation | Keywords for NAT feature in VPP.
*** Keywords ***
@@ -69,3 +70,58 @@
| | [Arguments] | ${node}
| | ...
| | Show NAT | ${node}
+
+| Initialize NAT44 in circular topology
+| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44
+| | ... | between DUTs:
+| | ... | - set interfaces up
+| | ... | - set IP addresses
+| | ... | - set ARP
+| | ... | - create routes
+| | ... | - set NAT44 - only on DUT1
+| | ...
+| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${dut2}
+| | ...
+| | Set interfaces in path up
+| | ...
+| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2}
+| | ... | 11.0.0.1 | 20
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1}
+| | ... | 11.0.0.2 | 20
+| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2}
+| | ... | ELSE | Set Variable | ${dut1}
+| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Set Variable | ${dut2_if2}
+| | ... | ELSE | Set Variable | ${dut1_if2}
+| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20
+| | ...
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | VPP Add IP Neighbor
+| | ... | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac}
+| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 12.0.0.2 | ${tg_if2_mac}
+| | ...
+| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | gateway=10.0.0.2
+| | ... | interface=${dut1_if1}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | gateway=11.0.0.2
+| | ... | interface=${dut1_if2}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | gateway=12.0.0.2
+| | ... | interface=${dut2_if2}
+| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | gateway=11.0.0.1
+| | ... | interface=${dut2_if1}
+| | ...
+| | Configure inside and outside interfaces
+| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| | Configure deterministic mode for NAT44
+| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30