diff options
Diffstat (limited to 'resources/libraries/robot/l2/l2_xconnect.robot')
| -rw-r--r-- | resources/libraries/robot/l2/l2_xconnect.robot | 200 |
1 files changed, 82 insertions, 118 deletions
diff --git a/resources/libraries/robot/l2/l2_xconnect.robot b/resources/libraries/robot/l2/l2_xconnect.robot index efe148c400..ea4d6afcef 100644 --- a/resources/libraries/robot/l2/l2_xconnect.robot +++ b/resources/libraries/robot/l2/l2_xconnect.robot @@ -17,11 +17,23 @@ *** Keywords *** | Configure L2XC -| | [Documentation] | Setup Bidirectional Cross Connect on DUTs -| | [Arguments] | ${node} | ${if1} | ${if2} | -| | Set Interface State | ${node} | ${if1} | up -| | Set Interface State | ${node} | ${if2} | up -| | Vpp Setup Bidirectional Cross Connect | ${node} | ${if1} | ${if2} +| | [Documentation] +| | ... | Setup Bidirectional Cross Connect on DUTs +| | +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - if1 - First interface. Type: string +| | ... | - if2 - Second interface. Type: string +| | +| | ... | *Example:* +| | +| | ... | \| Initialize L2 cross connect on node \| DUT1 \| 1 \| +| | +| | [Arguments] | ${dut} | ${if1} | ${if2} +| | +| | Set Interface State | ${dut} | ${if1} | up +| | Set Interface State | ${dut} | ${if2} | up +| | Vpp Setup Bidirectional Cross Connect | ${dut} | ${if1} | ${if2} | Initialize L2 cross connect on node | | [Documentation] @@ -39,10 +51,8 @@ | | [Arguments] | ${dut} | ${count}=${1} | | | | FOR | ${id} | IN RANGE | 1 | ${count} + 1 -| | | ${dut_str}= | Convert To Lowercase | ${dut} | | | VPP Setup Bidirectional Cross Connect | ${nodes['${dut}']} -| | | ... | ${${dut_str}_${prev_layer}_${id}_1} -| | | ... | ${${dut_str}_${prev_layer}_${id}_2} +| | | ... | ${${dut}_${int}1_${id}}[0] | ${${dut}_${int}2_${id}}[0] | | END | Initialize L2 cross connect @@ -63,23 +73,6 @@ | | | Initialize L2 cross connect on node | ${dut} | count=${count} | | END -| Initialize L2 xconnect in 2-node circular topology -| | [Documentation] -| | ... | Setup L2 xconnect topology by cross connecting two interfaces on -| | ... | each DUT. Interfaces are brought up. -| | -| | Set interfaces in path up -| | VPP Setup Bidirectional Cross Connect | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Initialize L2 xconnect in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 xconnect topology by cross connecting two interfaces on -| | ... | each DUT. Interfaces are brought up. -| | ... | -| | Set interfaces in path up -| | VPP Setup Bidirectional Cross Connect | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | VPP Setup Bidirectional Cross Connect | ${dut2} | ${dut2_if1} | ${dut2_if2} - | Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology with VXLANoIPv4 by cross connecting @@ -89,16 +82,22 @@ | | ... | interfaces. | | | | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | 172.16.0.1 | 24 +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | 172.16.0.2 | 24 +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | 172.16.0.2 | ${DUT2_${int}1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | 172.16.0.1 | ${DUT1_${int}2_mac}[0] +| | ${dut1s_vxlan}= | Create VXLAN interface +| | ... | ${dut1} | 24 | 172.16.0.1 | 172.16.0.2 +| | Configure L2XC +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1s_vxlan} +| | ${dut2s_vxlan}= | Create VXLAN interface +| | ... | ${dut2} | 24 | 172.16.0.2 | 172.16.0.1 +| | Configure L2XC +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2s_vxlan} | Initialize L2 xconnect with Vhost-User on node | | [Documentation] @@ -128,12 +127,14 @@ | | | Configure vhost interfaces | ${nodes['${dut}']} | | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 | | | ... | ${dut}-vhost-${number}-if2 -| | | ${dut_xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} +| | | ${dut_xconnect_if1}= | Set Variable If | ${number}==1 +| | | ... | ${${dut}_${int}1}[0] | | | ... | ${${dut}-vhost-${prev_index}-if2} | | | Configure L2XC | ${nodes['${dut}']} | ${dut_xconnect_if1} | | | ... | ${${dut}-vhost-${number}-if1} | | | Run Keyword If | ${number}==${nf_nodes} | Configure L2XC -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2} +| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} +| | | ... | ${${dut}_${int}2}[0] | | END | Initialize L2 xconnect with Vhost-User @@ -180,27 +181,29 @@ | | | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | ... | ${dut1} | ${DUT1_${int}2}[0] +| | ... | ${dut2} | ${DUT2_${int}1}[0] | SUB_ID=${subid} | | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | SUB_ID=${subid} | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} +| | ... | Configure L2 tag rewrite method on interfaces +| | ... | ${dut1} | ${subif_index_1} +| | ... | ${dut2} | ${subif_index_2} | TAG_REWRITE_METHOD=${tag_rewrite} | | ... | ELSE | Configure L2 tag rewrite method on interfaces | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | | | Configure vhost interfaces | | ... | ${dut1} | /run/vpp/sock-1-1 | /run/vpp/sock-1-2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} -| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} -| | +| | Configure L2XC +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${vhost_if1} +| | Configure L2XC +| | ... | ${dut1} | ${subif_index_1} | ${vhost_if2} | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Configure vhost interfaces | | ... | ${dut2} | /run/vpp/sock-1-1 | /run/vpp/sock-1-2 | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| | ... | Configure L2XC | ${dut2} | ${DUT2_${int}2}[0] | ${vhost_if2} | Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology | | [Documentation] @@ -225,51 +228,45 @@ | | [Arguments] | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} | | | | Set interfaces in path up -| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} -| | ... | ${lb_mode} +| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface +| | ... | ${dut1} | ${bond_mode} | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut1_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} -| | ... | ${dut1_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} -| | ... | ${dut1_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} -| | ... | ${dut1_eth_bond_if1} -| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} -| | ... | ${lb_mode} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | ${_even}= | Evaluate | ${pf} % 2 +| | | Run Keyword Unless | ${even} +| | | ... | VPP Enslave Physical Interface +| | | ... | ${dut1} | ${DUT1_${int}${pf}}[0] | ${dut1_eth_bond_if1} +| | END +| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface +| | ... | ${dut2} | ${bond_mode} | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} -| | ... | ${dut2_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} -| | ... | ${dut2_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} -| | ... | ${dut2_eth_bond_if1} +| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | ${_even}= | Evaluate | ${pf} % 2 +| | | Run Keyword If | ${even} +| | | ... | VPP Enslave Physical Interface +| | | ... | ${dut2} | ${DUT2_${int}${pf}}[0] | ${dut2_eth_bond_if1} +| | END | | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} | | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} +| | ... | ${dut1} | ${dut1_eth_bond_if1} +| | ... | ${dut2} | ${dut2_eth_bond_if1} | ${subid} | | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} +| | ... | ${dut1} | ${subif_index_1} +| | ... | ${dut2} | ${subif_index_2} | ${tag_rewrite} | | Configure vhost interfaces | | ... | ${dut1} | /run/vpp/sock-1-1 | /run/vpp/sock-1-2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} -| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} +| | Configure L2XC +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${vhost_if1} +| | Configure L2XC +| | ... | ${dut1} | ${subif_index_1} | ${vhost_if2} | | Configure vhost interfaces | | ... | ${dut2} | /run/vpp/sock-1-1 | /run/vpp/sock-1-2 -| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| | Configure L2XC +| | ... | ${dut2} | ${subif_index_2} | ${vhost_if1} +| | Configure L2XC +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${vhost_if2} | Initialize L2 xconnect with memif pairs on DUT node | | [Documentation] @@ -302,12 +299,13 @@ | | | Set up memif interfaces on DUT node | ${nodes['${dut}']} | | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 | | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | ${xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} -| | | ... | ${${dut}-memif-${prev_index}-if2} +| | | ${xconnect_if1}= | Set Variable If | ${number}==1 +| | | ... | ${${dut}_${int}1}[0] | ${${dut}-memif-${prev_index}-if2} | | | Configure L2XC | ${nodes['${dut}']} | ${xconnect_if1} | | | ... | ${${dut}-memif-${number}-if1} | | | Run Keyword If | ${number}==${count} | Configure L2XC -| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${number}-if2} | ${${dut}_if2} +| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${number}-if2} +| | | ... | ${${dut}_${int}2}[0] | | END | Initialize L2 xconnect with memif pairs @@ -331,37 +329,3 @@ | | Set interfaces in path up | | Show Memif on all DUTs | ${nodes} | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 xconnect for single memif -| | [Documentation] -| | ... | Create single Memif interface on all defined VPP nodes. Cross -| | ... | connect Memif interface with one physical interface. -| | -| | ... | *Arguments:* -| | ... | - number - Memif ID. Type: integer -| | -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} -| | -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | -| | ... | *Example:* -| | -| | ... | \| Initialize L2 xconnect for single memif \| 1 \| -| | -| | [Arguments] | ${number}=${1} -| | -| | FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_CNF -| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 -| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} -| | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ${${dut}-memif-${number}-if1} -| | END -| | Set single interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif |