diff options
Diffstat (limited to 'resources/libraries/robot/l2/tagging.robot')
| -rw-r--r-- | resources/libraries/robot/l2/tagging.robot | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/resources/libraries/robot/l2/tagging.robot b/resources/libraries/robot/l2/tagging.robot new file mode 100644 index 0000000000..7731ed193e --- /dev/null +++ b/resources/libraries/robot/l2/tagging.robot @@ -0,0 +1,219 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Documentation | Keywords for VLAN tests +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/l2/l2_xconnect.robot +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.NodePath + +*** Keywords *** + +| Initialize VLAN sub-interfaces in 3-node circular topology +| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} +| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF} +| | [Documentation] | *Create two subinterfaces on DUTs.* +| | ... +| | ... | *Arguments:* +| | ... | - DUT1 - Node to add sub-interface. +| | ... | - INT1 - Interface name on which create sub-interface. +| | ... | - DUT2 - Node to add sub-interface. +| | ... | - INT2 - Interface name on which create sub-interface. +| | ... | - SUB_ID - ID of the sub-interface to be created. +| | ... | - OUTER_VLAN_ID - Outer VLAN ID. +| | ... | - INNER_VLAN_ID - Inner VLAN ID. +| | ... | - TYPE_SUBIF - Type of sub-interface. +| | ... +| | ... | _Set testcase variables with name and index of created interfaces:_ +| | ... | - subif_name_1 +| | ... | - subif_index_1 +| | ... | - subif_name_2 +| | ... | - subif_index_2 +| | ... +| | ${INT1_name}= | Get interface name | ${DUT1} | ${INT1} +| | ${subif_name_1} | ${subif_index_1}= | Create subinterface | ${DUT1} +| | ... | ${INT1_name} | ${SUB_ID} +| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} +| | ... | ${TYPE_SUBIF} +| | ${INT2_name}= | Get interface name | ${DUT2} | ${INT2} +| | ${subif_name_2} | ${subif_index_2}= | Create subinterface | ${DUT2} +| | ... | ${INT2_name} | ${SUB_ID} +| | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} +| | ... | ${TYPE_SUBIF} +| | Set Interface State | ${DUT1} | ${subif_index_1} | up +| | Set Interface State | ${DUT2} | ${subif_index_2} | up +| | Set Test Variable | ${subif_name_1} +| | Set Test Variable | ${subif_index_1} +| | Set Test Variable | ${subif_name_2} +| | Set Test Variable | ${subif_index_2} + +| Initialize VLAN dot1q sub-interfaces in 3-node circular topology +| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} +| | [Documentation] | *Create two dot1q subinterfaces on DUTs.* +| | ... +| | ... | *Arguments:* +| | ... | - DUT1 - Node to add sub-interface. +| | ... | - INT1 - Interface name on which create VLAN sub-interface. +| | ... | - DUT2 - Node to add sub-interface. +| | ... | - INT2 - Interface name on which create VLAN sub-interface. +| | ... | - SUB_ID - ID of the sub-interface to be created. +| | ... +| | ... | _Set testcase variables with name and index of created interfaces:_ +| | ... | - subif_name_1 +| | ... | - subif_index_1 +| | ... | - subif_name_2 +| | ... | - subif_index_2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize VLAN dot1q sub-interfaces in 3-node circular topology \ +| | ... | \| ${nodes['DUT1']} \| ${dut1_if2} \| ${nodes['DUT2']} \ +| | ... | \| ${dut1_if2} \| 10 \| +| | ... +| | ${INT1_NAME}= | Get interface name | ${DUT1} | ${INT1} +| | ${INT2_NAME}= | Get interface name | ${DUT2} | ${INT2} +| | ${subif_name_1} | ${subif_index_1}= | Create Vlan Subinterface +| | | ... | ${DUT1} | ${INT1_NAME} | ${SUB_ID} +| | ${subif_name_2} | ${subif_index_2}= | Create Vlan Subinterface +| | | ... | ${DUT2} | ${INT2_NAME} | ${SUB_ID} +| | Set Interface State | ${DUT1} | ${subif_index_1} | up +| | Set Interface State | ${DUT2} | ${subif_index_2} | up +| | Set Test Variable | ${subif_name_1} +| | Set Test Variable | ${subif_index_1} +| | Set Test Variable | ${subif_name_2} +| | Set Test Variable | ${subif_index_2} + +| Configure L2 tag rewrite method on interfaces +| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2} | ${SUB_INT2} +| | ... | ${TAG_REWRITE_METHOD} +| | [Documentation] | *Setup tag rewrite on sub-interfaces on DUTs.* +| | ... +| | ... | *Arguments:* +| | ... | - DUT1 - Node to rewrite tags. +| | ... | - SUB_INT1 - Interface on which rewrite tags. +| | ... | - DUT2 - Node to rewrite tags. +| | ... | - SUB_INT2 - Interface on which rewrite tags. +| | ... | - TAG_REWRITE_METHOD - Method of tag rewrite. +| | ... +| | L2 Vlan tag rewrite | ${DUT1} | ${SUB_INT1} | ${TAG_REWRITE_METHOD} +| | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} + +| Connect interfaces and VLAN sub-interfaces using L2XC +| | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1} +| | ... | ${DUT2} | ${INT2} | ${SUB_INT2} +| | [Documentation] | *Add interface and subinterface to bidirectional +| | ... | L2-xconnect on DUTs.* +| | ... +| | ... | *Arguments:* +| | ... | - DUT1 - Node to add bidirectional cross-connect. +| | ... | - INT1 - Interface to add to the cross-connect. +| | ... | - SUB_INT1 - Sub-interface to add to the cross-connect. +| | ... | - DUT2 - Node to add bidirectional cross-connect. +| | ... | - INT2 - Interface to add to the cross-connect. +| | ... | - SUB_INT2 - Sub-interface to add to the cross-connect. +| | ... +| | Configure L2XC | ${DUT1} | ${INT1} | ${SUB_INT1} +| | Configure L2XC | ${DUT2} | ${INT2} | ${SUB_INT2} + +| Create vlan sub-interface +| | [Documentation] | Create VLAN sub-interface on DUT and set admin status up. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary +| | ... | - interface - Interface to create VLAN sub-interface. Type: string +| | ... | - vlan_id - VLAN ID. Type: integer +| | ... +| | ... | *Return:* +| | ... | - vlan_name - VLAN sub-interface name. Type: string +| | ... | - vlan_index - VLAN sub-interface SW index. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Create vlan sub-interface \| ${nodes['DUT1']} \| port3 \| 100 \| +| | ... +| | [Arguments] | ${dut_node} | ${interface} | ${vlan_id} +| | [Return] | ${vlan_name} | ${vlan_index} +| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} +| | ${vlan_name} | ${vlan_index}= | Create Vlan Subinterface +| | ... | ${dut_node} | ${interface_name} | ${vlan_id} +| | Set Interface State | ${dut_node} | ${vlan_index} | up + +| Create tagged sub-interface +| | [Documentation] | Create tagged sub-interface on DUT. Type of tagged \ +| | ... | sub-intreface depends on type_subif value: +| | ... | - one_tag -> VLAN +| | ... | - two_tags -> QinQ VLAN +| | ... | - two_tags dot1ad - DOT1AD +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary +| | ... | - interface - Interface to create tagged sub-interface. Type: string +| | ... | - subif_id - Sub-interface ID. Type: integer +| | ... | - outer_vlan_id - VLAN (outer) ID (Optional). Type: integer +| | ... | - inner_vlan_id - VLAN inner ID (Optional). Type: integer +| | ... | - type_subif - Sub-interface type (Optional). Type: string +| | ... +| | ... | *Return:* +| | ... | - subif_name - Sub-interface name. Type: string +| | ... | - subif_index - Sub-interface SW index. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Create tagged sub-interface \| ${nodes['DUT1']} \| port1 \| 10 \ +| | ... | \| outer_vlan_id=100 \| inner_vlan_id=200 \ +| | ... | \| type_subif=two_tags dot1ad \| +| | ... +| | [Arguments] | ${dut_node} | ${interface} | ${subif_id} +| | ... | ${outer_vlan_id}=${None} | ${inner_vlan_id}=${None} +| | ... | ${type_subif}=${None} +| | [Return] | ${subif_name} | ${subif_index} +| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} +| | ${subif_name} | ${subif_index}= | Create Subinterface +| | ... | ${dut_node} | ${interface_name} | ${subif_id} +| | ... | outer_vlan_id=${outer_vlan_id} | inner_vlan_id=${inner_vlan_id} +| | ... | type_subif=${type_subif} + +| Configure L2 tag rewrite method on interface +| | [Documentation] | Set L2 tag rewrite on (sub-)interface on DUT +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - Node to set L2 tag rewrite method. Type: dictionary +| | ... | - interface - (Sub-)interface name or SW index to set L2 tag rewrite +| | ... | method. Type: string or integer +| | ... | - tag_rewrite_method - Tag rewrite method. Type: string +| | ... | - push_dot1q - True to push tags as Dot1q, False to push tags as +| | ... | Dot1ad (Optional). Type: boolean +| | ... | - tag1_id - VLAN tag1 ID (Optional). Type: integer +| | ... | - tag2_id - VLAN tag2 ID (Optional). Type: integer +| | ... +| | ... | *Return:* +| | ... +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure L2 tag rewrite method on interface \| ${nodes['DUT1']} \ +| | ... | \| 9 \| pop-1 \| +| | ... | \| Configure L2 tag rewrite method on interface \| ${nodes['DUT2']} \ +| | ... | \| 10 \| translate-1-2 \| push_dot1q=${False} \| tag1_id=10 \ +| | ... | \| tag1_id=20 \| +| | ... +| | [Arguments] | ${dut_node} | ${interface} | ${tag_rewrite_method} +| | ... | ${push_dot1q}=${True} | ${tag1_id}=${None} | ${tag2_id}=${None} +| | ${result}= | Evaluate | isinstance($interface, int) +| | ${interface_name}= | Run Keyword If | ${result} | Set Variable | ${interface} +| | ... | ELSE | Get interface name | ${dut_node} | ${interface} +| | L2 Vlan Tag Rewrite | ${dut_node} | ${interface_name} | ${tag_rewrite_method} +| | ... | push_dot1q=${push_dot1q} | tag1_id=${tag1_id} | tag2_id=${tag2_id} |