diff options
Diffstat (limited to 'resources/libraries/robot/l2')
| -rw-r--r-- | resources/libraries/robot/l2/l2_bridge_domain.robot | 26 | ||||
| -rw-r--r-- | resources/libraries/robot/l2/tagging.robot | 90 |
2 files changed, 3 insertions, 113 deletions
diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot index 6a3a466cdb..a40f9c9c59 100644 --- a/resources/libraries/robot/l2/l2_bridge_domain.robot +++ b/resources/libraries/robot/l2/l2_bridge_domain.robot @@ -67,32 +67,6 @@ | | Set Interface State | ${dut_node} | ${dut_if} | up | | Add Interface To L2 BD | ${dut_node} | ${dut_if} | ${bd_id} | ${shg} -| Add destination port to L2FIB -| | [Documentation] -| | ... | Create a static L2FIB entry for required destination port -| | ... | on defined interface and bridge domain ID of the given VPP node. -| | ... -| | ... | *Arguments:* -| | ... | - ${dest_node} - Destination node. Type: dictionary -| | ... | - ${dest_node_if} - Destination node interface name. Type: string -| | ... | - ${vpp_node} - DUT node to add L2FIB entry on. Type: dictionary -| | ... | - ${vpp_node_if} - DUT node interface name. Type: string -| | ... | - ${bd_id} - Bridge domain ID. Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Add destination port to L2FIB \| ${nodes['TG']} \ -| | ... | \| eth1 \| ${nodes['DUT2']} \| GigabitEthernet0/8/0 \| 3 \| -| | ... -| | [Arguments] | ${node} | ${dest_node_if} | ${vpp_node} -| | ... | ${vpp_node_if} | ${bd_id} -| | ... -| | ${mac}= | Get Interface Mac | ${node} | ${dest_node_if} -| | Vpp Add L2fib Entry | ${vpp_node} | ${mac} | ${vpp_node_if} | ${bd_id} - | Initialize L2 bridge domain on node | | [Documentation] | | ... | Setup L2 bridge domain topology by adding two interfaces on DUT into diff --git a/resources/libraries/robot/l2/tagging.robot b/resources/libraries/robot/l2/tagging.robot index 67703d9ea0..a48e10c427 100644 --- a/resources/libraries/robot/l2/tagging.robot +++ b/resources/libraries/robot/l2/tagging.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,15 +12,13 @@ # limitations under the License. *** Settings *** -| Documentation | Keywords for VLAN tests -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot | Library | resources.libraries.python.L2Util | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath +| ... +| Documentation | Keywords for VLAN tests *** Keywords *** - | Initialize VLAN sub-interfaces in 3-node circular topology | | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID} | | ... | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF} @@ -120,88 +118,6 @@ | | Run Keyword Unless | ${DUT2} == ${None} | | ... | L2 Vlan tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD} -| Connect interfaces and VLAN sub-interfaces using L2XC -| | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1} | ${DUT2}=${None} -| | ... | ${INT2}=${None} | ${SUB_INT2}=${None} -| | [Documentation] | Add interface and subinterface to bidirectional -| | ... | L2-xconnect on DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - DUT1 - Node to add bidirectional cross-connect. -| | ... | - INT1 - Interface to add to the cross-connect. -| | ... | - SUB_INT1 - Sub-interface to add to the cross-connect. -| | ... | - DUT2 - Node to add bidirectional cross-connect. -| | ... | - INT2 - Interface to add to the cross-connect. -| | ... | - SUB_INT2 - Sub-interface to add to the cross-connect. -| | ... -| | Configure L2XC | ${DUT1} | ${INT1} | ${SUB_INT1} -| | Run Keyword Unless | ${DUT2} == ${None} -| | ... | Configure L2XC | ${DUT2} | ${INT2} | ${SUB_INT2} - -| Create vlan sub-interface -| | [Documentation] | Create VLAN sub-interface on DUT and set admin status up. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary -| | ... | - interface - Interface to create VLAN sub-interface. Type: string -| | ... | - vlan_id - VLAN ID. Type: integer -| | ... -| | ... | *Return:* -| | ... | - vlan_name - VLAN sub-interface name. Type: string -| | ... | - vlan_index - VLAN sub-interface SW index. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create vlan sub-interface \| ${nodes['DUT1']} \| port3 \| 100 \| -| | ... -| | [Arguments] | ${dut_node} | ${interface} | ${vlan_id} -| | ... -| | [Return] | ${vlan_name} | ${vlan_index} -| | ... -| | Set Interface State | ${dut_node} | ${interface} | up -| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} -| | ${vlan_name} | ${vlan_index}= | Create Vlan Subinterface -| | ... | ${dut_node} | ${interface_name} | ${vlan_id} -| | Set Interface State | ${dut_node} | ${vlan_index} | up - -| Create tagged sub-interface -| | [Documentation] | Create tagged sub-interface on DUT. Type of tagged \ -| | ... | sub-intreface depends on type_subif value: -| | ... | - one_tag -> VLAN -| | ... | - two_tags -> QinQ VLAN -| | ... | - two_tags dot1ad - DOT1AD -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node to add VLAN sub-intreface. Type: dictionary -| | ... | - interface - Interface to create tagged sub-interface. Type: string -| | ... | - subif_id - Sub-interface ID. Type: integer -| | ... | - outer_vlan_id - VLAN (outer) ID (Optional). Type: integer -| | ... | - inner_vlan_id - VLAN inner ID (Optional). Type: integer -| | ... | - type_subif - Sub-interface type (Optional). Type: string -| | ... -| | ... | *Return:* -| | ... | - subif_name - Sub-interface name. Type: string -| | ... | - subif_index - Sub-interface SW index. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Create tagged sub-interface \| ${nodes['DUT1']} \| port1 \| 10 \ -| | ... | \| outer_vlan_id=100 \| inner_vlan_id=200 \ -| | ... | \| type_subif=two_tags dot1ad \| -| | ... -| | [Arguments] | ${dut_node} | ${interface} | ${subif_id} -| | ... | ${outer_vlan_id}=${None} | ${inner_vlan_id}=${None} -| | ... | ${type_subif}=${None} -| | ... -| | [Return] | ${subif_name} | ${subif_index} -| | ... -| | Set Interface State | ${dut_node} | ${interface} | up -| | ${interface_name}= | Get interface name | ${dut_node} | ${interface} -| | ${subif_name} | ${subif_index}= | Create Subinterface -| | ... | ${dut_node} | ${interface_name} | ${subif_id} -| | ... | outer_vlan_id=${outer_vlan_id} | inner_vlan_id=${inner_vlan_id} -| | ... | type_subif=${type_subif} - | Configure L2 tag rewrite method on interface | | [Documentation] | Set L2 tag rewrite on (sub-)interface on DUT | | ... |