diff options
Diffstat (limited to 'resources/libraries/robot/overlay/lisp.robot')
| -rw-r--r-- | resources/libraries/robot/overlay/lisp.robot | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/resources/libraries/robot/overlay/lisp.robot b/resources/libraries/robot/overlay/lisp.robot new file mode 100644 index 0000000000..826cc3a7b1 --- /dev/null +++ b/resources/libraries/robot/overlay/lisp.robot @@ -0,0 +1,153 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.LispSetup.LispAdjacency +| Library | resources.libraries.python.LispSetup.LispEidTableMap +| Library | resources.libraries.python.LispSetup.LispLocalEid +| Library | resources.libraries.python.LispSetup.LispLocator +| Library | resources.libraries.python.LispSetup.LispLocatorSet +| Library | resources.libraries.python.LispSetup.LispRemoteMapping +| Resource | resources/libraries/robot/shared/default.robot + +*** Keywords *** +| Configure topology for IPv4 LISP testing +| | [Documentation] | Setup topology for IPv4 LISP testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv4 LISP testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} + +| Configure topology for IPv6 LISP testing +| | [Documentation] | Setup topology fo IPv6 LISP testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv6 LISP testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} + +| Configure LISP in 2-node circular topology +| | [Documentation] | Configure LISP topology in 2-node circular topology. +| | ... +| | ... | *Arguments:* +| | ... | - dut1 - DUT1 node. Type: dictionary +| | ... | - dut1_if - DUT1 node interface. Type: string +| | ... | - dut1_int_index - DUT1 node interface index. Type: integer +| | ... | - locator_set - Locator set values. Type: dictionary +| | ... | - dut1_eid - DUT1 node eid address. Type: dictionary +| | ... | - dut1_static_adjacency - DUT1 static adjacency. Type: dictionary +| | ... | - is_gpe - To enable GPE. Other than zero to enable Type: integer +| | ... | - vni_table - vni table Eid Table Mapping Type: integer +| | ... | - vrf_table - vrf table Eid Table Mapping Type: integer +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... | \| Configure LISP in 2-node circular topology \ +| | ... | \| ${dut1} \| ${interface_name} \ +| | ... | \| None \| ${locator_set} \| ${dut1_eid} \ +| | ... | \| ${dut1_static_adjacency} \| +| | ... +| | [Arguments] +| | ... | ${dut1} | ${dut1_if} | ${dut1_int_index} +| | ... | ${locator_set} | ${dut1_eid} +| | ... | ${dut1_static_adjacency} +| | ... | ${is_gpe}=0 +| | ... | ${vni_table}=0 | ${vrf_table}=0 +| | ... +# DUT1 settings: +| | ${dut1_int_index}= | Run Keyword If | ${dut1_int_index} is None +| | ... | Get Interface Sw Index | ${dut1} | ${dut1_if} +| | ... | ELSE | Set Variable | ${dut1_int_index} +| | Enable Lisp | ${dut1} +| | Run keyword if | ${is_gpe} != 0 +| | ... | Enable Lisp GPE | ${dut1} +| | Vpp Add Lisp Locator Set | ${dut1} | ${locator_set['locator_name']} +| | Vpp Add Lisp Locator | ${dut1} | ${locator_set['locator_name']} +| | ... | ${dut1_int_index} | ${locator_set['priority']} +| | ... | ${locator_set['weight']} +| | Run keyword if | ${is_gpe} != 0 +| | ... | Vpp Lisp Eid Table Mapping | ${dut1} +| | ... | ${vni_table} +| | ... | vrf=${vrf_table} +| | Vpp Add Lisp Local Eid | ${dut1} | ${dut1_eid['locator_name']} +| | ... | ${dut1_eid['vni']} | ${dut1_eid['eid']} | ${dut1_eid['prefix']} +| | Vpp Add Lisp Remote Mapping | ${dut1} | ${dut1_static_adjacency['vni']} +| | ... | ${dut1_static_adjacency['deid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['seid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['rloc']} +| | Vpp Add Lisp Adjacency | ${dut1} | ${dut1_static_adjacency['vni']} +| | ... | ${dut1_static_adjacency['deid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['seid']} +| | ... | ${dut1_static_adjacency['prefix']} + +| Configure topology for IPv6 LISPoIP4 testing +| | [Documentation] | Setup topology fo IPv6 LISPoIPV4 testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv6 LISPoIP4 testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} + +| Configure topology for IPv4 LISPoIP6 testing +| | [Documentation] | Setup topology fo IPv4 LISPoIPV6 testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv4 LISPoIP6 testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} |