diff options
Diffstat (limited to 'resources/libraries/robot/overlay/lisp.robot')
| -rw-r--r-- | resources/libraries/robot/overlay/lisp.robot | 257 |
1 files changed, 236 insertions, 21 deletions
diff --git a/resources/libraries/robot/overlay/lisp.robot b/resources/libraries/robot/overlay/lisp.robot index f9da0be399..16d04767e9 100644 --- a/resources/libraries/robot/overlay/lisp.robot +++ b/resources/libraries/robot/overlay/lisp.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. +# Copyright (c) 2020 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -29,15 +29,15 @@ | | | | Set interfaces in path up | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_if1_ip4} | ${ip4_plen} | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut_if2_ip4} | ${ip4_plen} | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${src_ip4} | ${TG_pf1_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dst_ip4} | ${TG_pf2_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] | Configure topology for IPv6 LISP testing | | [Documentation] | Setup topology fo IPv6 LISP testing. @@ -47,15 +47,15 @@ | | | | Set interfaces in path up | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_if1_ip6} | ${ip6_plen} | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut_if2_ip6} | ${ip6_plen} | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${src_ip6} | ${TG_pf1_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dst_ip6} | ${TG_pf2_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip6} | ${TG_pf2_mac}[0] | Configure LISP in 2-node circular topology | | [Documentation] | Configure LISP topology in 2-node circular topology. @@ -124,15 +124,15 @@ | | | | Set interfaces in path up | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_if1_ip6} | ${ip6_plen} | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut_if2_ip4} | ${ip4_plen} | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${src_ip6} | ${TG_pf1_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dst_ip6} | ${TG_pf2_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] | Configure topology for IPv4 LISPoIP6 testing | | [Documentation] | Setup topology fo IPv4 LISPoIPV6 testing. @@ -142,12 +142,227 @@ | | | | Set interfaces in path up | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_if1_ip4} | ${ip4_plen} | | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut_if2_ip6} | ${ip6_plen} | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${src_ip4} | ${TG_pf1_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dst_ip4} | ${TG_pf2_mac}[0] | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip6} | ${TG_pf2_mac}[0] + +| Initialize LISP IPv4 forwarding in 3-node circular topology +| | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ +| | ... | Don`t set route. +| | +| | ... | *Arguments:* +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int +| | +| | ... | *Return:* +| | ... | - No value returned +| | +| | ... | *Example:* +| | ... | \| Initialize LISP IPv4 forwarding in 3-node circular topology \ +| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \ +| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| +| | +| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} +| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} +| | +| | Set interfaces in path up +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}1}[0] | 10.10.10.2 | ${TG_pf1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_dut1_address} +| | ... | ${DUT2_${int}1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_dut2_address} +| | ... | ${DUT1_${int}2_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}2}[0] | 20.20.20.2 | ${TG_pf2_mac}[0] +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_tg_address} | ${duts_prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_dut2_address} | ${duts_prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_dut1_address} | ${duts_prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_tg_address} | ${duts_prefix} + +| Initialize LISP GPE IPv4 over IPsec in 3-node circular topology +| | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. +| | +| | ... | *Arguments:* +| | ... | - encr_alg - Encryption algorithm. Type: string +| | ... | - auth_alg - Authentication algorithm. Type: string +| | +| | ... | *Return:* +| | ... | - No value returned +| | +| | ... | *Example:* +| | ... | \| Initialize LISP GPE IPv4 over IPsec in 3-node circular topology\ +| | ... | \| ${encr_alg} \| ${auth_alg} +| | +| | [Arguments] | ${encr_alg} | ${auth_alg} +| | +| | Generate keys for IPSec | ${encr_alg} | ${auth_alg} +| | Initialize LISP IPv4 forwarding in 3-node circular topology +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | Configure LISP GPE topology in 3-node circular topology +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE} +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Configure manual keyed connection for IPSec +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} +| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} +| | Configure manual keyed connection for IPSec +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${encr_alg} | ${encr_key} +| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} +| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} + +| Initialize LISP IPv6 forwarding in 3-node circular topology +| | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \ +| | ... | Don`t set route. +| | +| | ... | *Arguments:* +| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string +| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string +| | ... | - duts_prefix - ip prefix. Type: int +| | +| | ... | *Return:* +| | ... | - No value returned +| | +| | ... | *Example:* +| | ... | \| Initialize LISP IPv6 forwarding in 3-node circular topology \ +| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \ +| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| +| | +| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} +| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} +| | +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_tg_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_dut2_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_dut1_address} | ${prefix} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_tg_address} | ${prefix} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}1}[0] | 2001:1::2 | ${TG_pf1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | 2001:2::2 | ${TG_pf2_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_dut1_address} +| | ... | ${DUT2_${int}1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_dut2_address} +| | ... | ${DUT1_${int}2_mac}[0] + +| Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology +| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ +| | ... | Don`t set route. +| | +| | ... | *Arguments:* +| | ... | - dut1_dut2_ip6_address - IPv6 address from DUT1 to DUT2. +| | ... | Type: string +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip6_address - IPv6 address from DUT2 to DUT1. +| | ... | Type: string +| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int +| | +| | ... | *Return:* +| | ... | - No value returned +| | +| | ... | *Example:* +| | ... | \| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular \ +| | ... | topology \| ${dut1_dut2_ip6_address} \| ${dut1_tg_ip4_address} \ +| | ... | \| ${dut2_dut1_ip6_address} \| ${dut2_tg_ip4_address} \ +| | ... | \| ${prefix4} \| ${prefix6} \| +| | +| | [Arguments] | ${dut1_dut2_ip6_address} | ${dut1_tg_ip4_address} +| | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} +| | ... | ${prefix4} | ${prefix6} +| | +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_tg_ip4_address} | ${prefix4} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_dut2_ip6_address} | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_dut1_ip6_address} | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_tg_ip4_address} | ${prefix4} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}1}[0] | 10.10.10.2 | ${TG_pf1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}2}[0] | 20.20.20.2 | ${TG_pf2_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_dut1_ip6_address} +| | ... | ${DUT2_${int}1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_dut2_ip6_address} +| | ... | ${DUT1_${int}2_mac}[0] + +| Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology +| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ +| | ... | Don`t set route. +| | +| | ... | *Arguments:* +| | ... | - dut1_dut2_ip4_address - IPv4 address from DUT1 to DUT2. +| | ... | Type: string +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - dut2_dut1_ip4_address - IPv4 address from DUT2 to DUT1. +| | ... | Type: string +| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string +| | ... | - prefix4 - IPv4 prefix. Type: int +| | ... | - prefix6 - IPv6 prefix. Type: int +| | +| | ... | *Return:* +| | ... | - No value returned +| | +| | ... | *Example:* +| | ... | \| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular \ +| | ... | topology \| ${dut1_dut2_ip4_address} \| ${dut1_tg_ip6_address} \ +| | ... | \| ${dut2_dut1_ip4_address} \| ${dut2_tg_ip6_address} \ +| | ... | \| ${prefix6} \| ${prefix4} \| +| | +| | [Arguments] | ${dut1_dut2_ip4_address} | ${dut1_tg_ip6_address} +| | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} +| | ... | ${prefix6} | ${prefix4} +| | +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_tg_ip6_address} | ${prefix6} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_dut2_ip4_address} | ${prefix4} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_dut1_ip4_address} | ${prefix4} +| | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_tg_ip6_address} | ${prefix6} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}1}[0] | 2001:1::2 | ${TG_pf1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}2}[0] | 2001:2::2 | ${TG_pf2_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_dut1_ip4_address} +| | ... | ${DUT2_${int}1_mac}[0] +| | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_dut2_ip4_address} +| | ... | ${DUT1_${int}2_mac}[0] |