diff options
Diffstat (limited to 'resources/libraries/robot/performance/performance_configuration.robot')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 215 |
1 files changed, 0 insertions, 215 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot deleted file mode 100644 index 13acce1524..0000000000 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ /dev/null @@ -1,215 +0,0 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Documentation | Performance suite keywords - configuration - -*** Keywords *** -| Initialize LISP IPv4 forwarding in 3-node circular topology -| | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ -| | ... | Don`t set route. -| | -| | ... | *Arguments:* -| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string -| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string -| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string -| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string -| | ... | - duts_prefix - ip prefix. Type: int -| | -| | ... | *Return:* -| | ... | - No value returned -| | -| | ... | *Example:* -| | ... | \| Initialize LISP IPv4 forwarding in 3-node circular topology \ -| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \ -| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| -| | -| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} -| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} -| | -| | Set interfaces in path up -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} -| | ... | ${dut1_tg_address} | ${duts_prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} -| | ... | ${dut1_dut2_address} | ${duts_prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} -| | ... | ${dut2_dut1_address} | ${duts_prefix} -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} -| | ... | ${dut2_tg_address} | ${duts_prefix} - -| Initialize LISP GPE IPv4 over IPsec in 3-node circular topology -| | [Documentation] | Setup Lisp GPE IPv4 forwarding over IPsec. -| | -| | ... | *Arguments:* -| | ... | - encr_alg - Encryption algorithm. Type: string -| | ... | - auth_alg - Authentication algorithm. Type: string -| | -| | ... | *Return:* -| | ... | - No value returned -| | -| | ... | *Example:* -| | ... | \| Initialize LISP GPE IPv4 over IPsec in 3-node circular topology\ -| | ... | \| ${encr_alg} \| ${auth_alg} -| | -| | [Arguments] | ${encr_alg} | ${auth_alg} -| | -| | Generate keys for IPSec | ${encr_alg} | ${auth_alg} -| | Initialize LISP IPv4 forwarding in 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | Configure LISP GPE topology in 3-node circular topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Configure manual keyed connection for IPSec -| | ... | ${dut1} | ${dut1_if2} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut1_spi} | ${dut2_spi} -| | ... | ${dut1_to_dut2_ip4} | ${dut2_to_dut1_ip4} -| | Configure manual keyed connection for IPSec -| | ... | ${dut2} | ${dut2_if1} | ${encr_alg} | ${encr_key} -| | ... | ${auth_alg} | ${auth_key} | ${dut2_spi} | ${dut1_spi} -| | ... | ${dut2_to_dut1_ip4} | ${dut1_to_dut2_ip4} - -| Initialize LISP IPv6 forwarding in 3-node circular topology -| | [Documentation] | Custom setup of IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. -| | -| | ... | *Arguments:* -| | ... | - dut1_dut2_address - Ip address from DUT1 to DUT2. Type: string -| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string -| | ... | - dut2_dut1_address - Ip address from DUT2 to DUT1. Type: string -| | ... | - dut1_tg_address - Ip address from DUT1 to tg. Type: string -| | ... | - duts_prefix - ip prefix. Type: int -| | -| | ... | *Return:* -| | ... | - No value returned -| | -| | ... | *Example:* -| | ... | \| Initialize LISP IPv6 forwarding in 3-node circular topology \ -| | ... | \| ${dut1_dut2_address} \| ${dut1_tg_address} \ -| | ... | \| ${dut2_dut1_address} \| ${dut2_tg_address} \| ${duts_prefix} \| -| | -| | [Arguments] | ${dut1_dut2_address} | ${dut1_tg_address} -| | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} -| | -| | Set interfaces in path up -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_address} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_address} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} | ${prefix} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} - -| Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology -| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. -| | -| | ... | *Arguments:* -| | ... | - dut1_dut2_ip6_address - IPv6 address from DUT1 to DUT2. -| | ... | Type: string -| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string -| | ... | - dut2_dut1_ip6_address - IPv6 address from DUT2 to DUT1. -| | ... | Type: string -| | ... | - dut1_tg_ip4_address - IPv4 address from DUT1 to tg. Type: string -| | ... | - prefix4 - IPv4 prefix. Type: int -| | ... | - prefix6 - IPv6 prefix. Type: int -| | -| | ... | *Return:* -| | ... | - No value returned -| | -| | ... | *Example:* -| | ... | \| Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular \ -| | ... | topology \| ${dut1_dut2_ip6_address} \| ${dut1_tg_ip4_address} \ -| | ... | \| ${dut2_dut1_ip6_address} \| ${dut2_tg_ip4_address} \ -| | ... | \| ${prefix4} \| ${prefix6} \| -| | -| | [Arguments] | ${dut1_dut2_ip6_address} | ${dut1_tg_ip4_address} -| | ... | ${dut2_dut1_ip6_address} | ${dut2_tg_ip4_address} -| | ... | ${prefix4} | ${prefix6} -| | -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} -| | ... | ${dut1_tg_ip4_address} | ${prefix4} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip6_address} | ${prefix6} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6} -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} -| | ... | ${dut2_tg_ip4_address} | ${prefix4} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip6_address} | ${dut1_if2_mac} - -| Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology -| | [Documentation] | Custom setup of IPv4 over IPv6 topology on all DUT nodes \ -| | ... | Don`t set route. -| | -| | ... | *Arguments:* -| | ... | - dut1_dut2_ip4_address - IPv4 address from DUT1 to DUT2. -| | ... | Type: string -| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string -| | ... | - dut2_dut1_ip4_address - IPv4 address from DUT2 to DUT1. -| | ... | Type: string -| | ... | - dut1_tg_ip6_address - IPv6 address from DUT1 to tg. Type: string -| | ... | - prefix4 - IPv4 prefix. Type: int -| | ... | - prefix6 - IPv6 prefix. Type: int -| | -| | ... | *Return:* -| | ... | - No value returned -| | -| | ... | *Example:* -| | ... | \| Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular \ -| | ... | topology \| ${dut1_dut2_ip4_address} \| ${dut1_tg_ip6_address} \ -| | ... | \| ${dut2_dut1_ip4_address} \| ${dut2_tg_ip6_address} \ -| | ... | \| ${prefix6} \| ${prefix4} \| -| | -| | [Arguments] | ${dut1_dut2_ip4_address} | ${dut1_tg_ip6_address} -| | ... | ${dut2_dut1_ip4_address} | ${dut2_tg_ip6_address} -| | ... | ${prefix6} | ${prefix4} -| | -| | Set interfaces in path up -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} | ${prefix6} -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | ${dut1_dut2_ip4_address} | ${prefix4} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4} -| | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6} -| | Vpp All Ra Suppress Link Layer | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac} -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} -| | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac} |