diff options
Diffstat (limited to 'resources/libraries/robot/performance/performance_utils.robot')
| -rw-r--r-- | resources/libraries/robot/performance/performance_utils.robot | 28 |
1 files changed, 16 insertions, 12 deletions
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 834de552e1..e0b68f19bc 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -77,8 +77,9 @@ | | ... | ${doublings}=${2} | ${traffic_directions}=${2} | | ... | ${latency_duration}=${PERF_TRIAL_LATENCY_DURATION} | | +| | # Latency measurements will need more than 9000 pps. | | ${result} = | Perform optimized ndrpdr search | ${frame_size} -| | ... | ${traffic_profile} | ${90000} | ${max_rate} +| | ... | ${traffic_profile} | ${9001} | ${max_rate} | | ... | ${packet_loss_ratio} | ${final_relative_width} | | ... | ${final_trial_duration} | ${initial_trial_duration} | | ... | ${number_of_intermediate_phases} | timeout=${timeout} @@ -93,20 +94,18 @@ | | ${ndr_per_stream}= | Evaluate | ${ndr_sum} / float(${traffic_directions}) | | ${rate}= | Evaluate | 0.9 * ${pdr_per_stream} | | Measure and show latency at specified rate | Latency at 90% PDR: -| | ... | ${latency_duration} | ${rate}pps | ${framesize} +| | ... | ${latency_duration} | ${rate} | ${framesize} | | ... | ${traffic_profile} | ${traffic_directions} | | ${rate}= | Evaluate | 0.5 * ${pdr_per_stream} | | Measure and show latency at specified rate | Latency at 50% PDR: -| | ... | ${latency_duration} | ${rate}pps | ${framesize} +| | ... | ${latency_duration} | ${rate} | ${framesize} | | ... | ${traffic_profile} | ${traffic_directions} | | ${rate}= | Evaluate | 0.1 * ${pdr_per_stream} | | Measure and show latency at specified rate | Latency at 10% PDR: -| | ... | ${latency_duration} | ${rate}pps | ${framesize} +| | ... | ${latency_duration} | ${rate} | ${framesize} | | ... | ${traffic_profile} | ${traffic_directions} -| | # Rate needs to be high enough for latency streams. -| | ${rate}= | Set Variable | ${9500} | | Measure and show latency at specified rate | Latency at 0% PDR: -| | ... | ${latency_duration} | ${rate}pps | ${framesize} +| | ... | ${latency_duration} | ${0} | ${framesize} | | ... | ${traffic_profile} | ${traffic_directions} | | # Finally, trials with runtime and other stats. | | # We expect NDR and PDR to have different-looking stats. @@ -469,12 +468,13 @@ | | [Documentation] | | ... | Send traffic at specified rate, single trial. | | ... | Extract latency information and append it to text message. -| | ... | The rate argument should be TRex friendly, so it should include "pps". +| | ... | The rate argument is int, so should not include "pps". +| | ... | If the given rate is too low, a safe value is used instead. | | | | ... | *Arguments:* | | ... | - message_prefix - Preface to test message addition. Type: string | | ... | - trial_duration - Duration of single trial [s]. Type: float -| | ... | - rate - Rate for sending packets. Type: string +| | ... | - rate - Rate for sending packets, in pps. Type: int | | ... | - frame_size - L2 Frame Size [B]. Type: integer/string | | ... | - traffic_profile - Name of module defining traffic for measurements. | | ... | Type: string @@ -482,19 +482,23 @@ | | ... | Type: int | | ... | - tx_port - TX port of TG, default 0. Type: integer | | ... | - rx_port - RX port of TG, default 1. Type: integer +| | ... | - safe_rate - To apply if rate is below this, as latency pps is fixed. +| | ... | In pps, type int. | | | | ... | *Example:* | | | | ... | \| Measure and show latency at specified rate \| Latency at 90% NDR \ -| | ... | \| \${1.0} \| 4.0mpps \| \${64} \| 3-node-IPv4 \| \${2} \| +| | ... | \| \${1.0} \| ${10000000} \| \${64} \| 3-node-IPv4 \| \${2} \ +| | ... | \| \${0} \| \${1} \| ${9500} \| | | | | [Arguments] | ${message_prefix} | ${trial_duration} | ${rate} | | ... | ${frame_size} | ${traffic_profile} | ${traffic_directions}=${2} -| | ... | ${tx_port}=${0} | ${rx_port}=${1} +| | ... | ${tx_port}=${0} | ${rx_port}=${1} | ${safe_rate}=${9001} | | +| | ${real_rate} = | Evaluate | max(${rate}, ${safe_rate}) | | # The following line is skipping some default arguments, | | # that is why subsequent arguments have to be named. -| | Send traffic on tg | ${trial_duration} | ${rate} | ${frame_size} +| | Send traffic on tg | ${trial_duration} | ${real_rate}pps | ${frame_size} | | ... | ${traffic_profile} | warmup_time=${0} | | ... | traffic_directions=${traffic_directions} | tx_port=${tx_port} | | ... | rx_port=${rx_port} |