diff options
Diffstat (limited to 'resources/libraries/robot/performance')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 220 |
1 files changed, 6 insertions, 214 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index b78ede38ef..5c8313b360 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -147,214 +147,6 @@ | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} | | ... | interface=${dut2_if2} -| Initialize IPv6 forwarding in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. Get the interface MAC addresses and setup neighbor -| | ... | on all VPP interfaces. Setup IPv6 addresses with /64 prefix on DUT-TG -| | ... | links. In case of 3-node topology setup IPv6 adresses with /64 prefix -| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /64 -| | ... | and next hop of neighbour DUT interface IPv4 address. -| | ... -| | ... | *Arguments:* -| | ... | - remote_host1_ip - IP address of remote host1 (Optional). -| | ... | Type: string -| | ... | - remote_host2_ip - IP address of remote host2 (Optional). -| | ... | Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding in circular topology \ -| | ... | \| 3ffe:5f::1 \| 3ffe:5f::2 \| -| | ... -| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 2001:3::2 | ${dut1_if2_mac} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:2::2 | ${tg_if2_mac} -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:1::1 | 64 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:3::1 | 64 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 2001:3::2 | 64 -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:2::1 | 64 -| | ... -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:3::2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | 64 | gateway=2001:3::1 -| | ... | interface=${dut2_if1} -| | ... -| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' -| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 -| | ... | gateway=2001:1::2 | interface=${dut1_if1} -| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' -| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 128 -| | ... | gateway=2001:2::2 | interface=${dut_if2} -| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' -| | ... | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 -| | ... | gateway=2001:3::2 | interface=${dut1_if2} -| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' -| | ... | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 128 -| | ... | gateway=2001:3::1 | interface=${dut2_if1} - -| Initialize IPv6 forwarding with scaling in circular topology -| | [Documentation] -| | ... | Custom setup of IPv6 topology with scalability of ip routes on all -| | ... | DUT nodes in 2-node / 3-node circular topology -| | ... -| | ... | *Arguments:* -| | ... | - count - IP route count. Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding with scaling in circular \ -| | ... | topology \| 100000 \| -| | ... -| | [Arguments] | ${count} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ${prefix}= | Set Variable | 64 -| | ${host_prefix}= | Set Variable | 128 -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:3::1 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | 2001:4::1 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | 2001:4::2 | ${prefix} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:5::1 | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:3::2 | ${tg1_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut1} | ${dut1_if2} | 2001:4::2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:5::2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | gateway=2001:3::2 -| | ... | interface=${dut1_if1} | count=${count} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} -| | ... | gateway=2001:4::2 | interface=${dut1_if2} | count=${count} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} -| | ... | gateway=2001:4::1 | interface=${dut2_if1} | count=${count} -| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2 -| | ... | interface=${dut_if2} | count=${count} - -| Initialize IPv6 forwarding with vhost in 2-node circular topology -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on \ -| | ... | VPP node. Set UP state of all VPP interfaces in path. Create \ -| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each \ -| | ... | Virtual interface to FIB table with Physical interface or Virtual \ -| | ... | interface on both nodes. Setup IPv6 addresses with /64 prefix on \ -| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with \ -| | ... | prefix /64 and next hop of neighbour IPv6 address. Setup neighbours \ -| | ... | on all VPP interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - nf_nodes - Number of guest VMs. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /var/run/vpp/sock-${VM_ID}-1 -| | ... | - /var/run/vpp/sock-${VM_ID}-2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| IPv6 forwarding with Vhost-User initialized in a 2-node circular\ -| | ... | topology \| 1 \| -| | ... -| | [Arguments] | ${nf_nodes}=${1} -| | ... -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | Set interfaces in path up -| | ${prefix}= | Set Variable | 64 -| | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} -| | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} -| | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} -| | ... | ipv6=${True} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} -| | ... | ipv6=${True} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:100::1 -| | ... | ${prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:200::1 -| | ... | ${prefix} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:100::2 | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 2001:200::2 | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=2001:100::2 -| | ... | interface=${dut1_if1} | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:200::2 -| | ... | interface=${dut1_if2} | vrf=${fib_table_2} -| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 -| | | ${fib_table_1}= | Evaluate | ${100}+${number} -| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 -| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up -| | | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} -| | | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${fib_table_1} | ipv6=${True} -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${fib_table_2} | ipv6=${True} -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64 -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64 -| | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1 -| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1 -| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} - | Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node @@ -434,7 +226,7 @@ | | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 | | ... | ${prefix} | | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} | | ... | gateway=2002:1::1 | interface=${dut1_if1} | | Run Keyword If | '${dut2_status}' == 'PASS' @@ -466,7 +258,7 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 | | | ${hexa_nr}= | Convert To Hex | ${number} | | | VPP Add IP Neighbor | ${dut1} @@ -579,7 +371,7 @@ | | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} | | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} | | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} | | VPP Add IP Neighbor @@ -1775,7 +1567,7 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} | ${prefix} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} | | VPP Add IP Neighbor @@ -1823,7 +1615,7 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6} | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} | | ... | ${dut2_tg_ip4_address} | ${prefix4} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} | | VPP Add IP Neighbor @@ -1871,7 +1663,7 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} | | VPP Add IP Neighbor |