diff options
Diffstat (limited to 'resources/libraries/robot/performance')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 156 |
1 files changed, 71 insertions, 85 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 25a76fed37..a6f1acecd0 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -339,10 +339,8 @@ | | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30 | | Configure IP addresses on interfaces | | ... | ${dut1} | ${dut1_if2} | 200.0.0.1 | 30 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg1_if1_mac} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg_if2_mac} | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2 | | ... | interface=${dut1_if1} | vrf=${fib_table_1} | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=200.0.0.2 @@ -689,6 +687,75 @@ | | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2 | | ... | interface=${dut_if2} | count=${count} +| Initialize IPv6 forwarding with vhost in 2-node circular topology +| | [Documentation] +| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on \ +| | ... | VPP node. Set UP state of all VPP interfaces in path. Create \ +| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each \ +| | ... | Virtual interface to FIB table with Physical interface or Virtual \ +| | ... | interface on both nodes. Setup IPv6 addresses with /64 prefix on \ +| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with \ +| | ... | prefix /64 and next hop of neighbour IPv6 address. Setup neighbours \ +| | ... | on all VPP interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - nf_nodes - Number of guest VMs. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for VM are defined in following format: +| | ... | - /var/run/vpp/sock-${VM_ID}-1 +| | ... | - /var/run/vpp/sock-${VM_ID}-2 +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv6 forwarding with Vhost-User initialized in a 2-node circular\ +| | ... | topology \| 1 \| +| | ... +| | [Arguments] | ${nf_nodes}=${1} +| | ... +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Set interfaces in path up +| | ${prefix}= | Set Variable | 64 +| | ${fib_table_1}= | Set Variable | ${101} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} +| | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} +| | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} +| | ... | ipv6=${True} +| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} +| | ... | ipv6=${True} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:100::1 +| | ... | ${prefix} +| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:200::1 +| | ... | ${prefix} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:100::2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 2001:200::2 | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=2001:100::2 +| | ... | interface=${dut1_if1} | vrf=${fib_table_1} +| | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:200::2 +| | ... | interface=${dut1_if2} | vrf=${fib_table_2} +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} +| | | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} | ipv6=${True} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} | ipv6=${True} +| | | Configure IP addresses on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64 +| | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1 +| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1 +| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} + | Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node @@ -2114,87 +2181,6 @@ | | Add Eth Interface | ${dut1} | ${dut1_eth_bond_if1_name} | ifc_pfx=eth_bond | | Add Eth Interface | ${dut2} | ${dut2_eth_bond_if1_name} | ifc_pfx=eth_bond -| Configure chains of NFs connected via vhost-user -| | [Documentation] -| | ... | Start 1..N chains of 1..N QEMU guests (VNFs) with two vhost-user\ -| | ... | interfaces and interconnecting NF. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: boolean -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... | - vnf - Network function as a payload. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure chains of VMs connected via vhost-user -| | ... | \| 1 \| 1 \| False \| 1024 \| False \| False \| vpp -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${jumbo}=${False} -| | ... | ${perf_qemu_qsz}=${1024} | ${use_tuned_cfs}=${False} -| | ... | ${auto_scale}=${True} | ${vnf}=vpp -| | ... -| | Import Library | resources.libraries.python.QemuManager | ${nodes} -| | ... | WITH NAME | vnf_manager -| | Run Keyword | vnf_manager.Construct VMs on all nodes -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs} -| | ... | auto_scale=${auto_scale} | vnf=${vnf} -| | ... | tg_if1_mac=${tg_if1_mac} | tg_if2_mac=${tg_if2_mac} -| | ... | vs_dtc=${cpu_count_int} | nf_dtc=${nf_dtc} | nf_dtcr=${nf_dtcr} -| | ... | rxq_count_int=${rxq_count_int} -| | Run Keyword | vnf_manager.Start All VMs | pinning=${True} -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual - -| Configure chains of NFs connected via vhost-user on single node -| | [Documentation] -| | ... | Start 1..N chains of 1..N QEMU guests (VNFs) with two vhost-user\ -| | ... | interfaces and interconnecting NF on single DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - node - DUT node. Type: dictionary -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: boolean -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... | - vnf - Network function as a payload. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure chains of NFs connected via vhost-user on single node -| | ... | \| DUT1 \| 1 \| 1 \| False \| 1024 \| False \| False \| vpp -| | ... -| | [Arguments] | ${node} | ${nf_chains}=${1} | ${nf_nodes}=${1} -| | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${1024} -| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True} | ${vnf}=vpp -| | ... -| | Import Library | resources.libraries.python.QemuManager | ${nodes} -| | ... | WITH NAME | vnf_manager -| | Run Keyword | vnf_manager.Initialize -| | Run Keyword | vnf_manager.Construct VMs on node -| | ... | node=${node} -| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} -| | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs} -| | ... | auto_scale=${auto_scale} | vnf=${vnf} -| | ... | tg_if1_mac=${tg_if1_mac} | tg_if2_mac=${tg_if2_mac} -| | ... | vs_dtc=${cpu_count_int} | nf_dtc=${nf_dtc} | nf_dtcr=${nf_dtcr} -| | ... | rxq_count_int=${rxq_count_int} -| | Run Keyword | vnf_manager.Start All VMs | pinning=${True} -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. |