diff options
Diffstat (limited to 'resources/libraries/robot/shared/interfaces.robot')
| -rw-r--r-- | resources/libraries/robot/shared/interfaces.robot | 666 |
1 files changed, 369 insertions, 297 deletions
diff --git a/resources/libraries/robot/shared/interfaces.robot b/resources/libraries/robot/shared/interfaces.robot index 18bb0d3568..f1dc89d300 100644 --- a/resources/libraries/robot/shared/interfaces.robot +++ b/resources/libraries/robot/shared/interfaces.robot @@ -19,147 +19,79 @@ | ${dpdk_no_tx_checksum_offload}= | ${True} *** Keywords *** -| Set interfaces in path up +| Set single interfaces in path up | | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set -| | ... | maximal MTU.* -| | -| | FOR | ${dut} | IN | @{duts} -| | | Set interfaces in path up on DUT | ${dut} -| | END -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} - -| Set interfaces in path up on DUT -| | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on specified DUT node and -| | ... | set maximal MTU.* +| | ... | *Set UP state on single physical VPP interfaces in path on all DUT +| | ... | nodes and set maximal MTU.* | | | | ... | *Arguments:* -| | ... | - dut - DUT node on which to set the interfaces up. -| | ... | Type: string +| | ... | - pf - NIC physical function (physical port). +| | ... | Type: integer | | | | ... | *Example:* | | -| | ... | \| Set interfaces in path up on DUT \| DUT1 \| +| | ... | \| Set single interfaces in path \| 1 \| | | -| | [Arguments] | ${dut} -# TODO: Rework KW to set all interfaces in path UP and set MTU (including -# software interfaces. Run KW at the start phase of VPP setup to split -# from other "functional" configuration. This will allow modularity of this -# library -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${${dut}_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | ... | ELSE -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up -| | Run Keyword Unless | '${if1_status}' == 'PASS' -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${${dut}_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up -| | ... | ELSE -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${${dut}_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | ... | ELSE -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} -| | Run Keyword Unless | '${if1_status}' == 'PASS' -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${${dut}_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} -| | ... | ELSE -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} +| | [Arguments] | ${pf}=${1} +| | +| | FOR | ${dut} | IN | @{duts} +| | | Set interfaces in path up on node on PF | ${dut} | ${pf} +| | END +| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60} -| Set single interfaces in path up +| Set interfaces in path up | | [Documentation] -| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set +| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set | | ... | maximal MTU.* | | -# TODO: Rework KW to set all interfaces in path UP and set MTU (including -# software interfaces. Run KW at the start phase of VPP setup to split -# from other "functional" configuration. This will allow modularity of this -# library | | FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | | ... | ELSE -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up +| | | Set interfaces in path up on node | ${dut} | | END -| | FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ELSE -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} -| | END -| | All VPP Interfaces Ready Wait | ${nodes} +| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60} -| Get Vhost dump -| | [Documentation] | Get vhost-user dump. -| | -| | ... | *Arguments:* -| | ... | - node - DUT node data. Type: dictionary -| | -| | [Arguments] | ${dut_node} -| | -| | [Return] | ${vhost_dump} -| | -| | ${vhost_dump}= | Vhost User Dump | ${dut_node} - -| Initialize layer interface on node +| Set interfaces in path up on node | | [Documentation] -| | ... | Baseline interfaces variables to be created. +| | ... | *Set UP state on VPP interfaces in path on specified DUT node and +| | ... | set maximal MTU.* | | | | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - count - Number of baseline interface variables. Type: integer +| | ... | - dut - DUT node on which to set the interfaces up. +| | ... | Type: string | | | | ... | *Example:* | | -| | ... | \| Initialize layer interface on node \| DUT1 \| 1 \| +| | ... | \| Set interfaces in path up on node \| DUT1 \| | | -| | [Arguments] | ${dut} | ${count}=${1} +| | [Arguments] | ${dut} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | FOR | ${id} | IN RANGE | 1 | ${count} + 1 -| | | Set Test Variable | ${${dut_str}_if_${id}_1} | ${${dut_str}_if1} -| | | Set Test Variable | ${${dut_str}_if_${id}_2} | ${${dut_str}_if2} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | Set interfaces in path up on node on PF | ${dut} | ${pf} | | END -| Initialize layer interface +| Set interfaces in path up on node on PF | | [Documentation] -| | ... | Physical interfaces variables to be created on all DUTs. +| | ... | *Set UP state on VPP interfaces in path on specified DUT node and +| | ... | set maximal MTU.* | | | | ... | *Arguments:* -| | ... | - count - Number of untagged interfaces variables. Type: integer +| | ... | - dut - DUT node on which to set the interfaces up. +| | ... | Type: string +| | ... | - pf - NIC physical function (physical port). +| | ... | Type: integer | | | | ... | *Example:* | | -| | ... | \| Initialize layer interface \| 1 \| +| | ... | \| Set interfaces in path up on node on PF \| DUT1 \| 1 \| | | -| | [Arguments] | ${count}=${1} +| | [Arguments] | ${dut} | ${pf} | | -| | FOR | ${dut} | IN | @{duts} -| | | Initialize layer interface on node | ${dut} | count=${count} +| | ${_chains} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | @{${dut}_${int}${pf}_1} +| | ${_id}= | Set Variable If | '${_chains}' == 'PASS' | _1 | ${EMPTY} +| | FOR | ${if} | IN | @{${dut}_${int}${pf}${_id}} +| | | Set Interface State | ${nodes['${dut}']} | ${if} | up +| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${if} | | END -| | Set Test Variable | ${prev_layer} | if | Pre-initialize layer driver | | [Documentation] @@ -182,8 +114,8 @@ | | ... | Pre-initialize vfio-pci driver by adding related sections to startup | | ... | config on all DUTs. | | -| | Add DPDK pci devices to all DUTs | | FOR | ${dut} | IN | @{duts} +| | | Run keyword | ${dut}.Add DPDK Dev | @{${dut}_pf_pci} | | | Run Keyword If | ${dpdk_no_tx_checksum_offload} | | | ... | ${dut}.Add DPDK No Tx Checksum Offload | | | Run Keyword | ${dut}.Add DPDK Log Level | debug @@ -198,6 +130,10 @@ | | | Run Keyword If | '${crypto_type}' != '${None}' | | | ... | ${dut}.Add DPDK Cryptodev | ${thr_count_int} | | END +| | ${_vlan_strip} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${vlan_strip_off} +| | Run keyword If | '${_vlan_strip}' == 'PASS' and ${duts_count} == 2 +| | ... | Add DPDK VLAN strip offload switch off between DUTs | Pre-initialize layer avf on all DUTs | | [Documentation] @@ -213,7 +149,7 @@ | Initialize layer driver | | [Documentation] -| | ... | Initialize driver based interfaces on each DUT. Interfaces are +| | ... | Initialize driver based interfaces on all DUT. Interfaces are | | ... | brought up. | | | | ... | *Arguments:* @@ -227,91 +163,205 @@ | | [Arguments] | ${driver} | | | | FOR | ${dut} | IN | @{duts} -| | | Run Keyword | Initialize layer ${driver} on node | ${dut} +| | | Initialize layer driver on node | ${dut} | ${driver} | | END -| | Set Test Variable | ${prev_layer} | vf +| | Set Test Variable | ${int} | vf | | Set interfaces in path up +| Initialize layer driver on node +| | [Documentation] +| | ... | Initialize driver based interfaces on DUT. +| | +| | ... | *Arguments:* +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - driver - NIC driver used in test [vfio-pci|avf|rdma-core]. +| | ... | Type: string +| | +| | ... | *Example:* +| | +| | ... | \| Initialize layer driver \| DUT1 \| vfio-pci \| +| | +| | [Arguments] | ${dut} | ${driver} +| | +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | ${_vf}= +| | | ... | Copy List | ${${dut}_${int}${pf}} +| | | ${_ip4_addr}= +| | | ... | Copy List | ${${dut}_${int}${pf}_ip4_addr} +| | | ${_ip4_prefix}= +| | | ... | Copy List | ${${dut}_${int}${pf}_ip4_prefix} +| | | ${_mac}= +| | | ... | Copy List | ${${dut}_${int}${pf}_mac} +| | | ${_pci}= +| | | ... | Copy List | ${${dut}_${int}${pf}_pci} +| | | ${_vlan}= +| | | ... | Copy List | ${${dut}_${int}${pf}_vlan} +| | | Set Test Variable +| | | ... | ${${dut}_vf${pf}} | ${_vf} +| | | Set Test Variable +| | | ... | ${${dut}_vf${pf}_ip4_addr} | ${_ip4_addr} +| | | Set Suite Variable +| | | ... | ${${dut}_vf${pf}_ip4_prefix} | ${_ip4_prefix} +| | | Set Test Variable +| | | ... | ${${dut}_vf${pf}_mac} | ${_mac} +| | | Set Test Variable +| | | ... | ${${dut}_vf${pf}_pci} | ${_pci} +| | | Set Test Variable +| | | ... | ${${dut}_vf${pf}_vlan} | ${_vlan} +| | | Run Keyword | Initialize layer ${driver} on node | ${dut} | ${pf} +| | END + | Initialize layer vfio-pci on node | | [Documentation] -| | ... | Initialize vfio-pci interfaces on DUT. Currently no operation. +| | ... | Initialize vfio-pci interfaces on DUT on NIC PF. +| | ... | Currently no operation. | | | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string +| | ... | - pf - NIC physical function (physical port). Type: integer | | | | ... | *Example:* | | -| | ... | \| Initialize layer vfio-pci on node \| DUT1 \| +| | ... | \| Initialize layer vfio-pci on node \| DUT1 \| 1 \| | | -| | [Arguments] | ${dut} +| | [Arguments] | ${dut} | ${pf} | | | | No operation | Initialize layer avf on node | | [Documentation] -| | ... | Initialize AVF interfaces on DUT. +| | ... | Initialize AVF (Intel) interfaces on DUT on NIC PF. | | | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string +| | ... | - pf - NIC physical function (physical port). Type: integer | | | | ... | *Example:* | | -| | ... | \| Initialize layer avf on node \| DUT1 \| +| | ... | \| Initialize layer avf on node \| DUT1 \| 1 \| +| | +| | [Arguments] | ${dut} | ${pf} +| | +| | FOR | ${vf} | IN RANGE | 0 | ${nic_vfs} +| | | ${_avf}= | VPP Create AVF Interface +| | | ... | ${nodes['${dut}']} | ${${dut}_vf${pf}}[${vf}] +| | | ... | num_rx_queues=${rxq_count_int} +| | | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size} +| | | ${_ip4}= +| | | ... | Get Interface IP4 | ${nodes['${dut}']} | ${_avf} +| | | ${_ip4_prefix}= +| | | ... | Get Interface IP4 Prefix Length | ${nodes['${dut}']} | ${_avf} +| | | ${_mac}= +| | | ... | Get Interface MAC | ${nodes['${dut}']} | ${_avf} +| | | ${_pci}= +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${_avf} +| | | ${_vlan}= +| | | ... | Get Interface VLAN | ${nodes['${dut}']} | ${_avf} +| | | Set List Value | ${${dut}_vf${pf}} | ${vf} | ${_avf} +| | | Set List Value | ${${dut}_vf${pf}_ip4_addr} | ${vf} | ${_ip4} +| | | Set List Value | ${${dut}_vf${pf}_ip4_prefix} | ${vf} | ${_ip4_prefix} +| | | Set List Value | ${${dut}_vf${pf}_mac} | ${vf} | ${_mac} +| | | Set List Value | ${${dut}_vf${pf}_pci} | ${vf} | ${_pci} +| | | Set List Value | ${${dut}_vf${pf}_vlan} | ${vf} | ${_vlan} +| | END + +| Initialize layer rdma-core on node +| | [Documentation] +| | ... | Initialize rdma-core (Mellanox VPP) interfaces on DUT on NIC PF. | | -| | [Arguments] | ${dut} +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - pf - NIC physical function (physical port). Type: integer | | -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | ${if1_vlan}= | Get Interface Vlan | ${nodes['${dut}']} | ${${dut}_if1} -| | ${if2_vlan}= | Get Interface Vlan | ${nodes['${dut}']} | ${${dut}_if2} -| | Set Test Variable | ${${dut_str}_vlan1} | ${if1_vlan} -| | Set Test Variable | ${${dut_str}_vlan2} | ${if2_vlan} -| | ${dut_new_if1}= | VPP Create AVF Interface | ${nodes['${dut}']} -| | ... | ${${dut}_if1_vf0} | num_rx_queues=${rxq_count_int} -| | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size} -| | ${dut_new_if1_mac}= | Get Interface MAC | ${nodes['${dut}']} -| | ... | ${dut_new_if1} -| | ${dut_new_if2}= | VPP Create AVF Interface | ${nodes['${dut}']} -| | ... | ${${dut}_if2_vf0} | num_rx_queues=${rxq_count_int} +| | ... | *Example:* +| | +| | ... | \| Initialize layer rdma-core on node \| DUT1 \| 1 \| +| | +| | [Arguments] | ${dut} | ${pf} +| | +| | ${_rdma}= | VPP Create Rdma Interface +| | ... | ${nodes['${dut}']} | ${${dut}_vf${pf}}[0] +| | ... | num_rx_queues=${rxq_count_int} | | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size} -| | ${dut_new_if2_mac}= | Get Interface MAC | ${nodes['${dut}']} -| | ... | ${dut_new_if2} -| | Set Test Variable | ${${dut_str}_if1} | ${dut_new_if1} -| | Set Test Variable | ${${dut_str}_if2} | ${dut_new_if2} -| | Set Test Variable | ${${dut_str}_if1_mac} | ${dut_new_if1_mac} -| | Set Test Variable | ${${dut_str}_if2_mac} | ${dut_new_if2_mac} +| | Set List Value | ${${dut}_vf${pf}} | 0 | ${_rdma} -| Initialize layer rdma-core on node +| Initialize layer interface | | [Documentation] -| | ... | Initialize rdma-core (MLX) interfaces on DUT. +| | ... | Physical interfaces variables to be created on all DUTs. +| | +| | ... | *Arguments:* +| | ... | - count - Number of untagged interfaces variables. Type: integer +| | +| | ... | *Example:* +| | +| | ... | \| Initialize layer interface \| 1 \| +| | +| | [Arguments] | ${count}=${1} +| | +| | FOR | ${dut} | IN | @{duts} +| | | Initialize layer interface on node | ${dut} | count=${count} +| | END + +| Initialize layer interface on node +| | [Documentation] +| | ... | Physical interfaces variables to be created on all DUTs. | | | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string +| | ... | - count - Number of baseline interface variables. Type: integer | | | | ... | *Example:* | | -| | ... | \| Initialize layer rdma-core on node \| DUT1 \| +| | ... | \| Initialize layer interface on node \| DUT1 \| 1 \| | | -| | [Arguments] | ${dut} +| | [Arguments] | ${dut} | ${count}=${1} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | ${if1_vlan}= | Get Interface Vlan | ${nodes['${dut}']} | ${${dut}_if1} -| | ${if2_vlan}= | Get Interface Vlan | ${nodes['${dut}']} | ${${dut}_if2} -| | Set Test Variable | ${${dut_str}_vlan1} | ${if1_vlan} -| | Set Test Variable | ${${dut_str}_vlan2} | ${if2_vlan} -| | ${dut_new_if1}= | VPP Create Rdma Interface | ${nodes['${dut}']} -| | ... | ${${dut}_if1} | num_rx_queues=${rxq_count_int} -| | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size} -| | ${dut_new_if1_mac}= | Get Interface MAC | ${nodes['${dut}']} -| | ... | ${dut_new_if1} -| | ${dut_new_if2}= | VPP Create Rdma Interface | ${nodes['${dut}']} -| | ... | ${${dut}_if2} | num_rx_queues=${rxq_count_int} -| | ... | rxq_size=${nic_rxq_size} | txq_size=${nic_txq_size} -| | ${dut_new_if2_mac}= | Get Interface MAC | ${nodes['${dut}']} -| | ... | ${dut_new_if2} -| | Set Test Variable | ${${dut_str}_if1} | ${dut_new_if1} -| | Set Test Variable | ${${dut_str}_if2} | ${dut_new_if2} -| | Set Test Variable | ${${dut_str}_if1_mac} | ${dut_new_if1_mac} -| | Set Test Variable | ${${dut_str}_if2_mac} | ${dut_new_if2_mac} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | Initialize layer interface on node on PF | ${dut} | ${pf} | count=${count} +| | END + +| Initialize layer interface on node on PF +| | [Documentation] +| | ... | Baseline interfaces variables to be created. +| | +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - pf - NIC physical function (physical port). Type: integer +| | ... | - count - Number of baseline interface variables. Type: integer +| | +| | ... | *Example:* +| | +| | ... | \| Initialize layer interface on node on PF \| DUT1 \| 1 \| 1 \| +| | +| | [Arguments] | ${dut} | ${pf} | ${count}=${1} +| | +| | FOR | ${id} | IN RANGE | 1 | ${count} + 1 +| | | Set Test Variable +| | | ... | ${${dut}_${int}${pf}_${id}} | ${${dut}_${int}${pf}} +| | END + +| Initialize layer bonding +| | [Documentation] +| | ... | Bonded interfaces and variables to be created on all DUT's interfaces. +| | +| | ... | *Arguments:* +| | ... | - bond_mode - Link bonding mode. Type: string +| | ... | - lb_mode - Load balance mode. Type: string +| | ... | - count - Number of bond interface variables. Type: integer +| | +| | ... | *Example:* +| | +| | ... | \| Initialize layer bonding \| xor \| l34 \| 1 \| +| | +| | [Arguments] | ${bond_mode}=xor | ${lb_mode}=l34 | ${count}=${1} +| | +| | FOR | ${dut} | IN | @{duts} +| | | Initialize layer bonding on node +| | | ... | ${dut} | bond_mode=${bond_mode} | lb_mode=${lb_mode} +| | | ... | count=${count} +| | END +| | Set Test Variable | ${int} | bond | Initialize layer bonding on node | | [Documentation] @@ -330,101 +380,80 @@ | | | | [Arguments] | ${dut} | ${bond_mode}=xor | ${lb_mode}=l34 | ${count}=${1} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} | | ${if_index}= | VPP Create Bond Interface | | ... | ${nodes['${dut}']} | ${bond_mode} | load_balance=${lb_mode} | | ... | mac=00:00:00:01:01:01 | | Set Interface State | ${nodes['${dut}']} | ${if_index} | up | | VPP Enslave Physical Interface -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_1_1} | ${if_index} +| | ... | ${nodes['${dut}']} | ${${dut}_${int}1_1} | ${if_index} | | VPP Enslave Physical Interface -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_1_2} | ${if_index} +| | ... | ${nodes['${dut}']} | ${${dut}_${int}2_1} | ${if_index} | | FOR | ${id} | IN RANGE | 1 | ${count} + 1 -| | | Set Test Variable | ${${dut_str}_bond_${id}_1} | ${if_index} -| | | Set Test Variable | ${${dut_str}_bond_${id}_2} | ${if_index} +| | | Set Test Variable | ${${dut}_bond1_${id}} | ${if_index} +| | | Set Test Variable | ${${dut}_bond2_${id}} | ${if_index} | | END -| Initialize layer bonding +| Initialize layer dot1q | | [Documentation] -| | ... | Bonded interfaces and variables to be created on all DUT's interfaces. +| | ... | Dot1q interfaces and variables to be created on all DUTs. | | | | ... | *Arguments:* -| | ... | - bond_mode - Link bonding mode. Type: string -| | ... | - lb_mode - Load balance mode. Type: string -| | ... | - count - Number of bond interface variables. Type: integer +| | ... | - count - Number of chains. +| | ... | Type: integer +| | ... | - vlan_per_chain - Whether to create vlan subinterface for each chain. +| | ... | Type: boolean +| | ... | - start - Id of first chain, allows adding chains during test. +| | ... | Type: integer | | -| | ... | *Example:* +| | ... | \| Initialize layer dot1q \| 1 \| True \| 1 \| | | -| | ... | \| Initialize layer bonding \| xor \| l34 \| 1 \| -| | -| | [Arguments] | ${bond_mode}=xor | ${lb_mode}=l34 | ${count}=${1} +| | [Arguments] | ${count}=${1} | ${vlan_per_chain}=${True} | ${start}=${1} | | | | FOR | ${dut} | IN | @{duts} -| | | Initialize layer bonding on node -| | | ... | ${dut} | bond_mode=${bond_mode} | lb_mode=${lb_mode} -| | | ... | count=${count} +| | | Initialize layer dot1q on node +| | | ... | ${dut} | count=${count} | vlan_per_chain=${vlan_per_chain} +| | | ... | start=${start} | | END -| | Set Test Variable | ${prev_layer} | bond +| | Set Test Variable | ${int} | dot1q -| Initialize layer dot1q on node for chain +| Initialize layer dot1q on node | | [Documentation] -| | ... | Optionally create tag popping subinterface per chain. -| | ... | Return interface indices for dot1q layer interfaces, -| | ... | or Nones if subinterfaces are not created. +| | ... | Dot1q interfaces and variables to be created on all DUT's node. | | | | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - id - Positive index of the chain. Type: integer +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - count - Number of chains. +| | ... | Type: integer | | ... | - vlan_per_chain - Whether to create vlan subinterface for each chain. | | ... | Type: boolean +| | ... | - start - Id of first chain, allows adding chains during test. +| | ... | Type: integer | | | | ... | *Example:* | | -| | ... | \| Initialize layer dot1q on node for chain \| DUT1 \| 1 \| True \| +| | ... | \| Initialize layer dot1q on node \| DUT1 \| 1 \| True \| 1 \| | | -| | [Arguments] | ${dut} | ${id} | ${vlan_per_chain}=${True} +| | [Arguments] | ${dut} | ${count}=${1} | ${vlan_per_chain}=${True} +| | ... | ${start}=${1} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | Return From Keyword If | ${id} != ${1} and not ${vlan_per_chain} -| | ... | ${NONE} | ${NONE} -| | # TODO: Is it worth creating Get Variable Value If Not None keyword? -| | ${default}= | Evaluate | ${100} + ${id} - ${1} -| | ${if1_vlan}= | Get Variable Value | \${${dut_str}_vlan1} -| | ${if1_vlan}= | Set Variable If | '${if1_vlan}' != '${NONE}' -| | ... | ${if1_vlan} | ${default} -| | ${default}= | Evaluate | ${200} + ${id} - ${1} -| | ${if2_vlan}= | Get Variable Value | \${${dut_str}_vlan2} -| | ${if2_vlan}= | Set Variable If | '${if2_vlan}' != '${NONE}' -| | ... | ${if2_vlan} | ${default} -| | ${if1_name} | ${if1_index}= | Create Vlan Subinterface -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} -| | ... | ${if1_vlan} -| | ${if2_name} | ${if2_index}= | Create Vlan Subinterface -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} -| | ... | ${if2_vlan} -| | Set Interface State | ${nodes['${dut}']} | ${if1_index} | up -| | Set Interface State | ${nodes['${dut}']} | ${if2_index} | up -| | Configure L2 tag rewrite method on interfaces -| | ... | ${nodes['${dut}']} | ${if1_index} | TAG_REWRITE_METHOD=pop-1 -| | Configure L2 tag rewrite method on interfaces -| | ... | ${nodes['${dut}']} | ${if2_index} | TAG_REWRITE_METHOD=pop-1 -| | Return From Keyword | ${if1_index} | ${if2_index} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | Initialize layer dot1q on node on PF | ${dut} | pf=${pf} | count=${count} +| | | ... | vlan_per_chain=${vlan_per_chain} | start=${start} +| | END -| Initialize layer dot1q on node +| Initialize layer dot1q on node on PF | | [Documentation] | | ... | Dot1q interfaces and variables to be created on all DUT's node | | ... | interfaces. | | -| | ... | TODO: Unify names for number of chains/pipelines/instances/interfaces. -| | ... | Chose names and descriptions that makes sense for both -| | ... | nf_density and older tests. -| | ... | Note that with vlan_per_chain=False it is not a number of interfaces. -| | ... | At least not number of real interfaces, just number of aliases. -| | ... | This TODO applies also to all keywords with nf_chains argument. -| | | | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - count - Number of chains. Type: integer +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - pf - NIC physical function (physical port). +| | ... | Type: integer +| | ... | - count - Number of chains. +| | ... | Type: integer | | ... | - vlan_per_chain - Whether to create vlan subinterface for each chain. | | ... | Type: boolean | | ... | - start - Id of first chain, allows adding chains during test. @@ -432,44 +461,76 @@ | | | | ... | *Example:* | | -| | ... | \| Initialize layer dot1q on node \| DUT1 \| 3 \| True \| 2 \| +| | ... | \| Initialize layer dot1q on node on PF \| DUT1 \| 3 \| True \| 2 \| | | -| | [Arguments] | ${dut} | ${count}=${1} | ${vlan_per_chain}=${True} -| | ... | ${start}=${1} +| | [Arguments] | ${dut} | ${pf}=${1} | ${count}=${1} +| | ... | ${vlan_per_chain}=${True} | ${start}=${1} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} | | FOR | ${id} | IN RANGE | ${start} | ${count} + 1 -| | | ${if1_index} | ${if2_index}= | Initialize layer dot1q on node for chain -| | | ... | dut=${dut} | id=${id} | vlan_per_chain=${vlan_per_chain} +| | | ${_dot1q} | Initialize layer dot1q on node on PF for chain +| | | ... | dut=${dut} | pf=${pf} | id=${id} | vlan_per_chain=${vlan_per_chain} | | | # First id results in non-None indices, after that _1_ are defined. -| | | ${if1_index}= | Set Variable If | '${if1_index}' == '${NONE}' -| | | ... | ${${dut_str}_dot1q_1_1} | ${if1_index} -| | | ${if2_index}= | Set Variable If | '${if2_index}' == '${NONE}' -| | | ... | ${${dut_str}_dot1q_1_2} | ${if2_index} -| | | Set Test Variable | ${${dut_str}_dot1q_${id}_1} | ${if1_index} -| | | Set Test Variable | ${${dut_str}_dot1q_${id}_2} | ${if2_index} +| | | ${_dot1q}= | Set Variable If | '${_dot1q}' == '${NONE}' +| | | ... | ${${dut}_dot1q${pf}_1} | ${_dot1q} +| | | ${_dot1q}= | Create List | ${_dot1q} +| | | Set Test Variable | ${${dut}_dot1q${pf}_${id}} | ${_dot1q} | | END -| Initialize layer dot1q +| Initialize layer dot1q on node on PF for chain | | [Documentation] -| | ... | Dot1q interfaces and variables to be created on all DUT's interfaces. +| | ... | Optionally create tag popping subinterface per chain. +| | ... | Return interface indices for dot1q layer interfaces, +| | ... | or Nones if subinterfaces are not created. | | | | ... | *Arguments:* -| | ... | - count - Number of chains. Type: integer +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - pf - NIC physical function (physical port). +| | ... | Type: integer +| | ... | - id - Positive index of the chain. +| | ... | Type: integer | | ... | - vlan_per_chain - Whether to create vlan subinterface for each chain. | | ... | Type: boolean +| | +| | ... | *Example:* +| | +| | ... | \| Initialize layer dot1q on node on PF for chain \| DUT1 \ +| | ... | \| 1 \| 1 \| True \| +| | +| | [Arguments] | ${dut} | ${pf} | ${id} | ${vlan_per_chain}=${True} +| | +| | Return From Keyword If | ${id} != ${1} and not ${vlan_per_chain} +| | ... | ${NONE} | ${NONE} +| | ${_default}= | Evaluate | ${pf} * ${100} + ${id} - ${1} +| | ${_vlan}= | Get Variable Value | \${${dut}_pf${pf}_vlan} +| | ${_vlan}= | Set Variable If | '${_vlan}[0]' != '${NONE}' +| | ... | ${_vlan}[0] | ${_default} +| | ${_name} | ${_index}= | Create Vlan Subinterface +| | ... | ${nodes['${dut}']} | ${${dut}_${int}${pf}_${id}}[0] | ${_vlan} +| | Set Interface State | ${nodes['${dut}']} | ${_index} | up +| | Configure L2 tag rewrite method on interfaces +| | ... | ${nodes['${dut}']} | ${_index} | TAG_REWRITE_METHOD=pop-1 +| | Return From Keyword | ${_index} + +| Initialize layer ip4vxlan +| | [Documentation] +| | ... | VXLAN interfaces and variables to be created on all DUT's interfaces. +| | +| | ... | *Arguments:* +| | ... | - count - Number of vxlan interfaces. +| | ... | Type: integer | | ... | - start - Id of first chain, allows adding chains during test. | | ... | Type: integer | | -| | ... | \| Initialize layer dot1q \| 3 \| True \| 2 \| +| | ... | \| Initialize layer ip4vxlan \| 3 \| 2 \| | | -| | [Arguments] | ${count}=${1} | ${vlan_per_chain}=${True} | ${start}=${1} +| | [Arguments] | ${count}=${1} | ${start}=${1} | | | | FOR | ${dut} | IN | @{duts} -| | | Initialize layer dot1q on node | ${dut} | count=${count} -| | | ... | vlan_per_chain=${vlan_per_chain} | start=${start} +| | | Initialize layer ip4vxlan on node | ${dut} | count=${count} +| | | ... | start=${start} | | END -| | Set Test Variable | ${prev_layer} | dot1q +| | Set Test Variable | ${int} | ip4vxlan | Initialize layer ip4vxlan on node | | [Documentation] @@ -479,8 +540,10 @@ | | ... | towards TG. VXLAN sub-interfaces has same IPv4 address as interfaces. | | | | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - count - Number of vxlan interfaces. Type: integer +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - count - Number of vxlan interfaces. +| | ... | Type: integer | | ... | - start - Id of first chain, allows adding chains during test. | | ... | Type: integer | | @@ -490,75 +553,75 @@ | | | | [Arguments] | ${dut} | ${count}=${1} | ${start}=${1} | | -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | Run Keyword If | "${start}" == "1" | VPP Interface Set IP Address -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_1_1} -| | ... | 172.16.0.1 | 24 -| | Run Keyword If | "${start}" == "1" | VPP Interface Set IP Address -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_1_2} -| | ... | 172.26.0.1 | 24 -| | FOR | ${id} | IN RANGE | ${start} | ${count} + 1 -| | | ${subnet}= | Evaluate | ${id} - 1 -| | | ${vni}= | Evaluate | ${id} - 1 -| | | ${ip4vxlan_1}= | Create VXLAN interface -| | | ... | ${nodes['${dut}']} | ${vni} | 172.16.0.1 | 172.17.${subnet}.2 -| | | ${ip4vxlan_2}= | Create VXLAN interface -| | | ... | ${nodes['${dut}']} | ${vni} | 172.26.0.1 | 172.27.${subnet}.2 -| | | ${prev_mac}= | Set Variable If | '${dut}' == 'DUT1' -| | | ... | ${tg_if1_mac} | ${dut1_if2_mac} -| | | ${next_mac}= | Set Variable If | '${dut}' == 'DUT1' and ${duts_count} == 2 -| | | ... | ${dut2_if1_mac} | ${tg_if2_mac} -| | | VPP Add IP Neighbor -| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} -| | | ... | 172.16.${subnet}.2 | ${prev_mac} -| | | VPP Add IP Neighbor -| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} -| | | ... | 172.26.${subnet}.2 | ${next_mac} -| | | VPP Route Add -| | | ... | ${nodes['${dut}']} | 172.17.${subnet}.0 | 24 -| | | ... | gateway=172.16.${subnet}.2 -| | | ... | interface=${${dut_str}_${prev_layer}_${id}_1} -| | | VPP Route Add -| | | ... | ${nodes['${dut}']} | 172.27.${subnet}.0 | 24 -| | | ... | gateway=172.26.${subnet}.2 -| | | ... | interface=${${dut_str}_${prev_layer}_${id}_2} -| | | Set VXLAN Bypass -| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} -| | | Set VXLAN Bypass -| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} -| | | Set Test Variable -| | | ... | ${${dut_str}_ip4vxlan_${id}_1} | ${ip4vxlan_1} -| | | Set Test Variable -| | | ... | ${${dut_str}_ip4vxlan_${id}_2} | ${ip4vxlan_2} +| | FOR | ${pf} | IN RANGE | 1 | ${nic_pfs} + 1 +| | | Initialize layer ip4vxlan on node on PF | ${dut} | pf=${pf} +| | | ... | count=${count} | start=${start} | | END -| Initialize layer ip4vxlan +| Initialize layer ip4vxlan on node on PF | | [Documentation] -| | ... | VXLAN interfaces and variables to be created on all DUT's interfaces. +| | ... | Setup VXLANoIPv4 between TG and DUTs and DUT to DUT by connecting +| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought +| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces +| | ... | towards TG. VXLAN sub-interfaces has same IPv4 address as interfaces. | | | | ... | *Arguments:* -| | ... | - count - Number of vxlan interfaces. Type: integer +| | ... | - dut - DUT node. +| | ... | Type: string +| | ... | - pf - NIC physical function (physical port). +| | ... | Type: integer +| | ... | - count - Number of vxlan interfaces. +| | ... | Type: integer | | ... | - start - Id of first chain, allows adding chains during test. | | ... | Type: integer | | -| | ... | \| Initialize layer ip4vxlan \| 3 \| 2 \| +| | ... | *Example:* | | -| | [Arguments] | ${count}=${1} | ${start}=${1} +| | ... | \| Initialize layer ip4vxlan on node on PF \| DUT1 \| 3 \| 2 \| | | -| | FOR | ${dut} | IN | @{duts} -| | | Initialize layer ip4vxlan on node | ${dut} | count=${count} -| | ... | start=${start} +| | [Arguments] | ${dut} | ${pf}=${1} | ${count}=${1} | ${start}=${1} +| | +| | Run Keyword If | "${start}" == "1" | VPP Interface Set IP Address +| | ... | ${nodes['${dut}']} | ${${dut}_${int}${pf}_1}[0] +| | ... | 172.${pf}6.0.1 | 24 +| | FOR | ${id} | IN RANGE | ${start} | ${count} + 1 +| | | ${_subnet}= | Evaluate | ${id} - 1 +| | | ${_vni}= | Evaluate | ${id} - 1 +| | | ${_ip4vxlan}= | Create VXLAN interface +| | | ... | ${nodes['${dut}']} | ${_vni} +| | | ... | 172.${pf}6.0.1 | 172.${pf}7.${_subnet}.2 +| | | ${_prev_mac}= | Set Variable If | '${dut}' == 'DUT1' +| | | ... | ${tg_if1_mac} | ${dut1_if2_mac} +| | | ${_next_mac}= | Set Variable If | '${dut}' == 'DUT1' and ${duts_count} == 2 +| | | ... | ${dut2_if1_mac} | ${tg_if2_mac} +| | | ${_even}= | Evaluate | ${pf} % 2 +| | | ${_mac}= | Set Variable If | ${_even} +| | | ... | ${_prev_mac} | ${_next_mac} +| | | VPP Add IP Neighbor +| | | ... | ${nodes['${dut}']} | ${${dut}_${int}${pf}_${id}}[0] +| | | ... | 172.${pf}6.${_subnet}.2 | ${_mac} +| | | VPP Route Add +| | | ... | ${nodes['${dut}']} | 172.${pf}7.${_subnet}.0 | 24 +| | | ... | gateway=172.${pf}6.${_subnet}.2 +| | | ... | interface=${${dut}_${int}${pf}_${id}}[0] +| | | Set VXLAN Bypass +| | | ... | ${nodes['${dut}']} | ${${dut}_${int}${pf}_${id}}[0] +| | | ${_ip4vxlan}= | Create List | ${_ip4vxlan} +| | | Set Test Variable +| | | ... | ${${dut}_ip4vxlan${pf}_${id}} | ${_ip4vxlan} | | END -| | Set Test Variable | ${prev_layer} | ip4vxlan | Configure vhost interfaces | | [Documentation] | | ... | Create two Vhost-User interfaces on defined VPP node. | | | | ... | *Arguments:* -| | ... | - ${dut_node} - DUT node. Type: dictionary -| | ... | - ${sock1} - Socket path for first Vhost-User interface. Type: string -| | ... | - ${sock2} - Socket path for second Vhost-User interface. Type: string +| | ... | - ${dut_node} - DUT node. +| | ... | Type: dictionary +| | ... | - ${sock1} - Socket path for first Vhost-User interface. +| | ... | Type: string +| | ... | - ${sock2} - Socket path for second Vhost-User interface. +| | ... | Type: string | | ... | - ${vhost_if1} - Name of the first Vhost-User interface (Optional). | | ... | Type: string | | ... | - ${vhost_if2} - Name of the second Vhost-User interface (Optional). @@ -576,9 +639,6 @@ | | | | ... | \| Configure vhost interfaces \ | | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| -| | ... | \| Configure vhost interfaces \ -| | ... | \| ${nodes['DUT2']} \| /tmp/sock1 \| /tmp/sock2 \| dut2_vhost_if1 \ -| | ... | \| dut2_vhost_if2 \| | | | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vhost_if1}=vhost_if1 | | ... | ${vhost_if2}=vhost_if2 | ${is_server}=${False} @@ -600,3 +660,15 @@ | | Set Test Variable | ${${vhost_if2}} | ${vhost_2} | | Set Test Variable | ${${vhost_if1}_mac} | ${vhost_1_mac} | | Set Test Variable | ${${vhost_if2}_mac} | ${vhost_2_mac} + +| Get Vhost dump +| | [Documentation] | Get vhost-user dump. +| | +| | ... | *Arguments:* +| | ... | - dut - DUT node data. +| | ... | Type: dictionary +| | +| | [Arguments] | ${dut} +| | +| | ${vhost_dump}= | Vhost User Dump | ${dut} +| | Return From Keyword | ${vhost_dump} |