diff options
Diffstat (limited to 'resources/libraries/robot/shared/testing_path.robot')
| -rw-r--r-- | resources/libraries/robot/shared/testing_path.robot | 353 |
1 files changed, 353 insertions, 0 deletions
diff --git a/resources/libraries/robot/shared/testing_path.robot b/resources/libraries/robot/shared/testing_path.robot new file mode 100644 index 0000000000..b7543e1c4d --- /dev/null +++ b/resources/libraries/robot/shared/testing_path.robot @@ -0,0 +1,353 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.NodePath + +*** Keywords *** +| Configure path in 2-node circular topology +| | [Documentation] | Compute path for testing on two given nodes in circular +| | ... | topology and set corresponding test case variables. +| | ... +| | ... | *Arguments:* +| | ... | - ${tg_node} - TG node. Type: dictionary +| | ... | - ${dut_node} - DUT node. Type: dictionary +| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node +| | ... | parameter in circular topology. Type: dictionary +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - ${tg_node} - TG node. +| | ... | - ${tg_to_dut_if1} - 1st TG interface towards DUT. +| | ... | - ${tg_to_dut_if2} - 2nd TG interface towards DUT. +| | ... | - ${dut_node} - DUT node. +| | ... | - ${dut_to_tg_if1} - 1st DUT interface towards TG. +| | ... | - ${dut_to_tg_if2} - 2nd DUT interface towards TG. +| | ... | - ${tg_to_dut_if1_mac} +| | ... | - ${tg_to_dut_if2_mac} +| | ... | - ${dut_to_tg_if1_mac} +| | ... | - ${dut_to_tg_if2_mac} +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Given Configure path in 2-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \| +| | ... +| | [Arguments] | ${tg_node} | ${dut_node} | ${tg2_node} +| | Should Be Equal | ${tg_node} | ${tg2_node} +| | Append Nodes | ${tg_node} | ${dut_node} | ${tg_node} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_to_dut_if1} | ${tmp}= | First Interface +| | ${tg_to_dut_if2} | ${tmp}= | Last Interface +| | ${dut_to_tg_if1} | ${tmp}= | First Ingress Interface +| | ${dut_to_tg_if2} | ${tmp}= | Last Egress Interface +| | ${tg_to_dut_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut_if1} +| | ${tg_to_dut_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut_if2} +| | ${dut_to_tg_if1_mac}= | Get interface mac | ${dut_node} | ${dut_to_tg_if1} +| | ${dut_to_tg_if2_mac}= | Get interface mac | ${dut_node} | ${dut_to_tg_if2} +| | Set Test Variable | ${tg_to_dut_if1} +| | Set Test Variable | ${tg_to_dut_if2} +| | Set Test Variable | ${dut_to_tg_if1} +| | Set Test Variable | ${dut_to_tg_if2} +| | Set Test Variable | ${tg_to_dut_if1_mac} +| | Set Test Variable | ${tg_to_dut_if2_mac} +| | Set Test Variable | ${dut_to_tg_if1_mac} +| | Set Test Variable | ${dut_to_tg_if2_mac} +| | Set Test Variable | ${tg_node} +| | Set Test Variable | ${dut_node} + +| Set interfaces in 2-node circular topology up +| | [Documentation] | Set UP state on interfaces in 2-node path on nodes and +| | ... | wait for all interfaces are ready. Requires more than +| | ... | one link between nodes. +| | ... +| | ... | *Arguments:* +| | ... | - No arguments. +| | ... +| | ... | *Return:* +| | ... | - No value returned. +| | ... +| | ... | _NOTE:_ This KW uses test variables sets in +| | ... | "Configure path in 2-node circular topology" KW. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Given Configure path in 2-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \| +| | ... | \| And Set interfaces in 2-node circular topology up \| +| | ... +| | Set Interface State | ${tg_node} | ${tg_to_dut_if1} | up +| | Set Interface State | ${tg_node} | ${tg_to_dut_if2} | up +| | Set Interface State | ${dut_node} | ${dut_to_tg_if1} | up +| | Set Interface State | ${dut_node} | ${dut_to_tg_if2} | up +| | Vpp Node Interfaces Ready Wait | ${dut_node} + +| Configure path in 3-node circular topology +| | [Documentation] | Compute path for testing on three given nodes in circular +| | ... | topology and set corresponding test case variables. +| | ... +| | ... | *Arguments:* +| | ... | - ${tg_node} - TG node. Type: dictionary +| | ... | - ${dut1_node} - DUT1 node. Type: dictionary +| | ... | - ${dut2_node} - DUT2 node. Type: dictionary +| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node +| | ... | parameter in circular topology. Type: dictionary +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... | +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - ${tg_node} - TG node. +| | ... | - ${tg_to_dut1} - TG interface towards DUT1. +| | ... | - ${tg_to_dut2} - TG interface towards DUT2. +| | ... | - ${dut1_node} - DUT1 node. +| | ... | - ${dut1_to_tg} - DUT1 interface towards TG. +| | ... | - ${dut1_to_dut2} - DUT1 interface towards DUT2. +| | ... | - ${dut2_node} - DUT2 node. +| | ... | - ${dut2_to_tg} - DUT2 interface towards TG. +| | ... | - ${dut2_to_dut1} - DUT2 interface towards DUT1. +| | ... | - ${tg_to_dut1_mac} +| | ... | - ${tg_to_dut2_mac} +| | ... | - ${dut1_to_tg_mac} +| | ... | - ${dut1_to_dut2_mac} +| | ... | - ${dut2_to_tg_mac} +| | ... | - ${dut2_to_dut1_mac} +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Given Configure path in 3-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \| ${nodes['TG']} \| +| | ... +| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg2_node} +| | Should Be Equal | ${tg_node} | ${tg2_node} +| | Append Nodes | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node} +| | Compute Path +| | ${tg_to_dut1} | ${tmp}= | Next Interface +| | ${dut1_to_tg} | ${tmp}= | Next Interface +| | ${dut1_to_dut2} | ${tmp}= | Next Interface +| | ${dut2_to_dut1} | ${tmp}= | Next Interface +| | ${dut2_to_tg} | ${tmp}= | Next Interface +| | ${tg_to_dut2} | ${tmp}= | Next Interface +| | ${tg_to_dut1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1} +| | ${tg_to_dut2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2} +| | ${dut1_to_tg_mac}= | Get interface mac | ${dut1_node} | ${dut1_to_tg} +| | ${dut1_to_dut2_mac}= | Get interface mac | ${dut1_node} | ${dut1_to_dut2} +| | ${dut2_to_tg_mac}= | Get interface mac | ${dut2_node} | ${dut2_to_tg} +| | ${dut2_to_dut1_mac}= | Get interface mac | ${dut2_node} | ${dut2_to_dut1} +| | Set Test Variable | ${tg_to_dut1} +| | Set Test Variable | ${dut1_to_tg} +| | Set Test Variable | ${tg_to_dut2} +| | Set Test Variable | ${dut2_to_tg} +| | Set Test Variable | ${dut1_to_dut2} +| | Set Test Variable | ${dut2_to_dut1} +| | Set Test Variable | ${tg_to_dut1_mac} +| | Set Test Variable | ${tg_to_dut2_mac} +| | Set Test Variable | ${dut1_to_tg_mac} +| | Set Test Variable | ${dut1_to_dut2_mac} +| | Set Test Variable | ${dut2_to_tg_mac} +| | Set Test Variable | ${dut2_to_dut1_mac} +| | Set Test Variable | ${tg_node} +| | Set Test Variable | ${dut1_node} +| | Set Test Variable | ${dut2_node} + +| Set interfaces in 3-node circular topology up +| | [Documentation] +| | ... | Set UP state on interfaces in 3-node path on nodes and \ +| | ... | wait until all interfaces are ready. +| | ... +| | ... | *Arguments:* +| | ... | - No arguments. +| | ... +| | ... | *Return:* +| | ... | - No value returned. +| | ... +| | ... | _NOTE:_ This KW uses test variables sets in +| | ... | "Configure path in 3-node circular topology" KW. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Given Configure path in 3-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \| +| | ... | \| And Set interfaces in 3-node circular topology up \| +| | ... +| | Set Interface State | ${tg_node} | ${tg_to_dut1} | up +| | Set Interface State | ${tg_node} | ${tg_to_dut2} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_tg} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_dut2} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_tg} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_dut1} | up +| | Vpp Node Interfaces Ready Wait | ${dut1_node} +| | Vpp Node Interfaces Ready Wait | ${dut2_node} + +| Configure path in double-link 3-node circular topology +| | [Documentation] +| | ... | Compute path for testing on three given nodes in circular \ +| | ... | topology with double link and set corresponding \ +| | ... | test case variables. +| | ... +| | ... | *Arguments:* +| | ... | - ${tg_node} - TG node. Type: dictionary +| | ... | - ${dut1_node} - DUT1 node. Type: dictionary +| | ... | - ${dut2_node} - DUT2 node. Type: dictionary +| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node +| | ... | parameter in circular topology. Type: dictionary +| | ... +| | ... | *Return:* +| | ... | - No value returned. +| | ... | +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - ${tg_node} - TG node. +| | ... | - ${tg_to_dut1_if1} - TG interface towards DUT1 interface 1. +| | ... | - ${tg_to_dut1_if2} - TG interface towards DUT1 interface 2. +| | ... | - ${tg_to_dut1_mac_if1} - TG towards DUT1 MAC address interface 1. +| | ... | - ${tg_to_dut1_mac_if2} - TG towards DUT1 MAC address interface 2. +| | ... | - ${tg_to_dut2_if1} - TG interface towards DUT2 interface 1. +| | ... | - ${tg_to_dut2_if2} - TG interface towards DUT2 interface 2. +| | ... | - ${tg_to_dut2_mac_if1} - TG towards DUT2 MAC address interface 1. +| | ... | - ${tg_to_dut2_mac_if2} - TG towards DUT2 MAC address interface 2. +| | ... | - ${dut1_node} - DUT1 node. +| | ... | - ${dut1_to_tg_if1} - DUT1 interface towards TG interface 1. +| | ... | - ${dut1_to_tg_if2} - DUT1 interface towards TG interface 2. +| | ... | - ${dut1_to_tg_mac_if1} - DUT1 towards TG MAC address interface 1. +| | ... | - ${dut1_to_tg_mac_if2} - DUT1 towards TG MAC address interface 2. +| | ... | - ${dut1_to_dut2_if1} - DUT1 interface towards DUT2 interface 1. +| | ... | - ${dut1_to_dut2_if2} - DUT1 interface towards DUT2 interface 2. +| | ... | - ${dut1_to_dut2_mac_if1} - DUT1 towards DUT2 MAC address interface 1. +| | ... | - ${dut1_to_dut2_mac_if2} - DUT1 towards DUT2 MAC address interface 2. +| | ... | - ${dut2_node} - DUT2 node. +| | ... | - ${dut2_to_tg_if1} - DUT2 interface towards TG interface 1. +| | ... | - ${dut2_to_tg_if2} - DUT2 interface towards TG interface 2. +| | ... | - ${dut2_to_tg_mac_if1} - DUT2 towards TG MAC address interface 1. +| | ... | - ${dut2_to_tg_mac_if2} - DUT2 towards TG MAC address interface 2. +| | ... | - ${dut2_to_dut1_if1} - DUT2 interface towards DUT1 interface 1. +| | ... | - ${dut2_to_dut1_if2} - DUT2 interface towards DUT1 interface 2. +| | ... | - ${dut2_to_dut1_mac_if1} - DUT2 towards DUT1 MAC address interface 1. +| | ... | - ${dut2_to_dut1_mac_if2} - DUT2 towards DUT1 MAC address interface 2. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure path in double-link 3-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \| ${nodes['TG']} \| +| | ... +| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg2_node} +| | Should Be Equal | ${tg_node} | ${tg2_node} +| | # Compute path TG - DUT1 with two links in between +| | Append Nodes | ${tg_node} | ${dut1_node} | ${tg_node} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_to_dut1_if1} | ${tmp}= | First Interface +| | ${tg_to_dut1_if2} | ${tmp}= | Last Interface +| | ${dut1_to_tg_if1} | ${tmp}= | First Ingress Interface +| | ${dut1_to_tg_if2} | ${tmp}= | Last Egress Interface +| | # Compute path TG - DUT2 with two links in between +| | Clear Path +| | Append Nodes | ${tg_node} | ${dut2_node} | ${tg_node} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_to_dut2_if1} | ${tmp}= | First Interface +| | ${tg_to_dut2_if2} | ${tmp}= | Last Interface +| | ${dut2_to_tg_if1} | ${tmp}= | First Ingress Interface +| | ${dut2_to_tg_if2} | ${tmp}= | Last Egress Interface +| | # Compute path DUT1 - DUT2 with one link in between +| | Clear Path +| | Append Nodes | ${dut1_node} | ${dut2_node} | ${dut1_node} +| | Compute Path | always_same_link=${FALSE} +| | ${dut1_to_dut2_if1} | ${tmp}= | First Interface +| | ${dut1_to_dut2_if2} | ${tmp}= | Last Interface +| | ${dut2_to_dut1_if1} | ${tmp}= | First Ingress Interface +| | ${dut2_to_dut1_if2} | ${tmp}= | Last Egress Interface +| | # Set test variables +| | Set Test Variable | ${tg_to_dut1_if1} +| | Set Test Variable | ${tg_to_dut1_if2} +| | Set Test Variable | ${tg_to_dut2_if1} +| | Set Test Variable | ${tg_to_dut2_if2} +| | Set Test Variable | ${dut1_to_tg_if1} +| | Set Test Variable | ${dut1_to_tg_if2} +| | Set Test Variable | ${dut2_to_tg_if1} +| | Set Test Variable | ${dut2_to_tg_if2} +| | Set Test Variable | ${dut1_to_dut2_if1} +| | Set Test Variable | ${dut1_to_dut2_if2} +| | Set Test Variable | ${dut2_to_dut1_if1} +| | Set Test Variable | ${dut2_to_dut1_if2} +| | Set Test Variable | ${tg_node} +| | Set Test Variable | ${dut1_node} +| | Set Test Variable | ${dut2_node} +| | # Set Mac Addresses +| | ${tg_to_dut1_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1_if1} +| | ${tg_to_dut1_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1_if2} +| | ${tg_to_dut2_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2_if1} +| | ${tg_to_dut2_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2_if2} +| | ${dut1_to_tg_if1_mac}= | Get interface mac | ${dut1_node} +| | ... | ${dut1_to_tg_if1} +| | ${dut1_to_tg_if2_mac}= | Get interface mac | ${dut1_node} +| | ... | ${dut1_to_tg_if2} +| | ${dut1_to_dut2_if1_mac}= | Get interface mac | ${dut1_node} +| | ... | ${dut1_to_dut2_if1} +| | ${dut1_to_dut2_if2_mac}= | Get interface mac | ${dut1_node} +| | ... | ${dut1_to_dut2_if2} +| | ${dut2_to_tg_if1_mac}= | Get interface mac | ${dut2_node} +| | ... | ${dut2_to_tg_if1} +| | ${dut2_to_tg_if2_mac}= | Get interface mac | ${dut2_node} +| | ... | ${dut2_to_tg_if2} +| | ${dut2_to_dut1_if1_mac}= | Get interface mac | ${dut2_node} +| | ... | ${dut2_to_dut1_if1} +| | ${dut2_to_dut1_if2_mac}= | Get interface mac | ${dut2_node} +| | ... | ${dut2_to_dut1_if2} +| | Set Test Variable | ${tg_to_dut1_if1_mac} +| | Set Test Variable | ${tg_to_dut1_if2_mac} +| | Set Test Variable | ${tg_to_dut2_if1_mac} +| | Set Test Variable | ${tg_to_dut2_if2_mac} +| | Set Test Variable | ${dut1_to_tg_if1_mac} +| | Set Test Variable | ${dut1_to_tg_if2_mac} +| | Set Test Variable | ${dut1_to_dut2_if1_mac} +| | Set Test Variable | ${dut1_to_dut2_if2_mac} +| | Set Test Variable | ${dut2_to_tg_if1_mac} +| | Set Test Variable | ${dut2_to_tg_if2_mac} +| | Set Test Variable | ${dut2_to_dut1_if1_mac} +| | Set Test Variable | ${dut2_to_dut1_if2_mac} + +| Set interfaces in double-link 3-node circular topology up +| | [Documentation] +| | ... | Set UP state on interfaces in 3-node double link path \ +| | ... | wait until all interfaces are ready. +| | ... +| | ... | *Arguments:* +| | ... | - No arguments. +| | ... +| | ... | *Return:* +| | ... | - No value returned. +| | ... +| | ... | _NOTE:_ This KW uses test variables sets in +| | ... | "Configure path in double-link 3-node circular topology" KW. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure path in double-link 3-node circular topology \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \| +| | ... | \| Interfaces in Double-Link 3-node testing are UP \| +| | ... +| | Set Interface State | ${tg_node} | ${tg_to_dut1_if1} | up +| | Set Interface State | ${tg_node} | ${tg_to_dut1_if2} | up +| | Set Interface State | ${tg_node} | ${tg_to_dut2_if1} | up +| | Set Interface State | ${tg_node} | ${tg_to_dut2_if2} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_tg_if1} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_tg_if2} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_tg_if1} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_tg_if2} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_dut2_if1} | up +| | Set Interface State | ${dut1_node} | ${dut1_to_dut2_if2} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_dut1_if1} | up +| | Set Interface State | ${dut2_node} | ${dut2_to_dut1_if2} | up +| | Vpp Node Interfaces Ready Wait | ${dut1_node} +| | Vpp Node Interfaces Ready Wait | ${dut2_node}
\ No newline at end of file |