aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/shared/testing_path.robot
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/shared/testing_path.robot')
-rw-r--r--resources/libraries/robot/shared/testing_path.robot353
1 files changed, 353 insertions, 0 deletions
diff --git a/resources/libraries/robot/shared/testing_path.robot b/resources/libraries/robot/shared/testing_path.robot
new file mode 100644
index 0000000000..b7543e1c4d
--- /dev/null
+++ b/resources/libraries/robot/shared/testing_path.robot
@@ -0,0 +1,353 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.NodePath
+
+*** Keywords ***
+| Configure path in 2-node circular topology
+| | [Documentation] | Compute path for testing on two given nodes in circular
+| | ... | topology and set corresponding test case variables.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${tg_node} - TG node. Type: dictionary
+| | ... | - ${dut_node} - DUT node. Type: dictionary
+| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node
+| | ... | parameter in circular topology. Type: dictionary
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variables:
+| | ... | - ${tg_node} - TG node.
+| | ... | - ${tg_to_dut_if1} - 1st TG interface towards DUT.
+| | ... | - ${tg_to_dut_if2} - 2nd TG interface towards DUT.
+| | ... | - ${dut_node} - DUT node.
+| | ... | - ${dut_to_tg_if1} - 1st DUT interface towards TG.
+| | ... | - ${dut_to_tg_if2} - 2nd DUT interface towards TG.
+| | ... | - ${tg_to_dut_if1_mac}
+| | ... | - ${tg_to_dut_if2_mac}
+| | ... | - ${dut_to_tg_if1_mac}
+| | ... | - ${dut_to_tg_if2_mac}
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Given Configure path in 2-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \|
+| | ...
+| | [Arguments] | ${tg_node} | ${dut_node} | ${tg2_node}
+| | Should Be Equal | ${tg_node} | ${tg2_node}
+| | Append Nodes | ${tg_node} | ${dut_node} | ${tg_node}
+| | Compute Path | always_same_link=${FALSE}
+| | ${tg_to_dut_if1} | ${tmp}= | First Interface
+| | ${tg_to_dut_if2} | ${tmp}= | Last Interface
+| | ${dut_to_tg_if1} | ${tmp}= | First Ingress Interface
+| | ${dut_to_tg_if2} | ${tmp}= | Last Egress Interface
+| | ${tg_to_dut_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut_if1}
+| | ${tg_to_dut_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut_if2}
+| | ${dut_to_tg_if1_mac}= | Get interface mac | ${dut_node} | ${dut_to_tg_if1}
+| | ${dut_to_tg_if2_mac}= | Get interface mac | ${dut_node} | ${dut_to_tg_if2}
+| | Set Test Variable | ${tg_to_dut_if1}
+| | Set Test Variable | ${tg_to_dut_if2}
+| | Set Test Variable | ${dut_to_tg_if1}
+| | Set Test Variable | ${dut_to_tg_if2}
+| | Set Test Variable | ${tg_to_dut_if1_mac}
+| | Set Test Variable | ${tg_to_dut_if2_mac}
+| | Set Test Variable | ${dut_to_tg_if1_mac}
+| | Set Test Variable | ${dut_to_tg_if2_mac}
+| | Set Test Variable | ${tg_node}
+| | Set Test Variable | ${dut_node}
+
+| Set interfaces in 2-node circular topology up
+| | [Documentation] | Set UP state on interfaces in 2-node path on nodes and
+| | ... | wait for all interfaces are ready. Requires more than
+| | ... | one link between nodes.
+| | ...
+| | ... | *Arguments:*
+| | ... | - No arguments.
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned.
+| | ...
+| | ... | _NOTE:_ This KW uses test variables sets in
+| | ... | "Configure path in 2-node circular topology" KW.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Given Configure path in 2-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \|
+| | ... | \| And Set interfaces in 2-node circular topology up \|
+| | ...
+| | Set Interface State | ${tg_node} | ${tg_to_dut_if1} | up
+| | Set Interface State | ${tg_node} | ${tg_to_dut_if2} | up
+| | Set Interface State | ${dut_node} | ${dut_to_tg_if1} | up
+| | Set Interface State | ${dut_node} | ${dut_to_tg_if2} | up
+| | Vpp Node Interfaces Ready Wait | ${dut_node}
+
+| Configure path in 3-node circular topology
+| | [Documentation] | Compute path for testing on three given nodes in circular
+| | ... | topology and set corresponding test case variables.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${tg_node} - TG node. Type: dictionary
+| | ... | - ${dut1_node} - DUT1 node. Type: dictionary
+| | ... | - ${dut2_node} - DUT2 node. Type: dictionary
+| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node
+| | ... | parameter in circular topology. Type: dictionary
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ... |
+| | ... | _NOTE:_ This KW sets following test case variables:
+| | ... | - ${tg_node} - TG node.
+| | ... | - ${tg_to_dut1} - TG interface towards DUT1.
+| | ... | - ${tg_to_dut2} - TG interface towards DUT2.
+| | ... | - ${dut1_node} - DUT1 node.
+| | ... | - ${dut1_to_tg} - DUT1 interface towards TG.
+| | ... | - ${dut1_to_dut2} - DUT1 interface towards DUT2.
+| | ... | - ${dut2_node} - DUT2 node.
+| | ... | - ${dut2_to_tg} - DUT2 interface towards TG.
+| | ... | - ${dut2_to_dut1} - DUT2 interface towards DUT1.
+| | ... | - ${tg_to_dut1_mac}
+| | ... | - ${tg_to_dut2_mac}
+| | ... | - ${dut1_to_tg_mac}
+| | ... | - ${dut1_to_dut2_mac}
+| | ... | - ${dut2_to_tg_mac}
+| | ... | - ${dut2_to_dut1_mac}
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Given Configure path in 3-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \| ${nodes['TG']} \|
+| | ...
+| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg2_node}
+| | Should Be Equal | ${tg_node} | ${tg2_node}
+| | Append Nodes | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
+| | Compute Path
+| | ${tg_to_dut1} | ${tmp}= | Next Interface
+| | ${dut1_to_tg} | ${tmp}= | Next Interface
+| | ${dut1_to_dut2} | ${tmp}= | Next Interface
+| | ${dut2_to_dut1} | ${tmp}= | Next Interface
+| | ${dut2_to_tg} | ${tmp}= | Next Interface
+| | ${tg_to_dut2} | ${tmp}= | Next Interface
+| | ${tg_to_dut1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1}
+| | ${tg_to_dut2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2}
+| | ${dut1_to_tg_mac}= | Get interface mac | ${dut1_node} | ${dut1_to_tg}
+| | ${dut1_to_dut2_mac}= | Get interface mac | ${dut1_node} | ${dut1_to_dut2}
+| | ${dut2_to_tg_mac}= | Get interface mac | ${dut2_node} | ${dut2_to_tg}
+| | ${dut2_to_dut1_mac}= | Get interface mac | ${dut2_node} | ${dut2_to_dut1}
+| | Set Test Variable | ${tg_to_dut1}
+| | Set Test Variable | ${dut1_to_tg}
+| | Set Test Variable | ${tg_to_dut2}
+| | Set Test Variable | ${dut2_to_tg}
+| | Set Test Variable | ${dut1_to_dut2}
+| | Set Test Variable | ${dut2_to_dut1}
+| | Set Test Variable | ${tg_to_dut1_mac}
+| | Set Test Variable | ${tg_to_dut2_mac}
+| | Set Test Variable | ${dut1_to_tg_mac}
+| | Set Test Variable | ${dut1_to_dut2_mac}
+| | Set Test Variable | ${dut2_to_tg_mac}
+| | Set Test Variable | ${dut2_to_dut1_mac}
+| | Set Test Variable | ${tg_node}
+| | Set Test Variable | ${dut1_node}
+| | Set Test Variable | ${dut2_node}
+
+| Set interfaces in 3-node circular topology up
+| | [Documentation]
+| | ... | Set UP state on interfaces in 3-node path on nodes and \
+| | ... | wait until all interfaces are ready.
+| | ...
+| | ... | *Arguments:*
+| | ... | - No arguments.
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned.
+| | ...
+| | ... | _NOTE:_ This KW uses test variables sets in
+| | ... | "Configure path in 3-node circular topology" KW.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Given Configure path in 3-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \|
+| | ... | \| And Set interfaces in 3-node circular topology up \|
+| | ...
+| | Set Interface State | ${tg_node} | ${tg_to_dut1} | up
+| | Set Interface State | ${tg_node} | ${tg_to_dut2} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_tg} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_dut2} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_tg} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_dut1} | up
+| | Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | Vpp Node Interfaces Ready Wait | ${dut2_node}
+
+| Configure path in double-link 3-node circular topology
+| | [Documentation]
+| | ... | Compute path for testing on three given nodes in circular \
+| | ... | topology with double link and set corresponding \
+| | ... | test case variables.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${tg_node} - TG node. Type: dictionary
+| | ... | - ${dut1_node} - DUT1 node. Type: dictionary
+| | ... | - ${dut2_node} - DUT2 node. Type: dictionary
+| | ... | - ${tg2_node} - Node where the path ends. Must be the same as TG node
+| | ... | parameter in circular topology. Type: dictionary
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned.
+| | ... |
+| | ... | _NOTE:_ This KW sets following test case variables:
+| | ... | - ${tg_node} - TG node.
+| | ... | - ${tg_to_dut1_if1} - TG interface towards DUT1 interface 1.
+| | ... | - ${tg_to_dut1_if2} - TG interface towards DUT1 interface 2.
+| | ... | - ${tg_to_dut1_mac_if1} - TG towards DUT1 MAC address interface 1.
+| | ... | - ${tg_to_dut1_mac_if2} - TG towards DUT1 MAC address interface 2.
+| | ... | - ${tg_to_dut2_if1} - TG interface towards DUT2 interface 1.
+| | ... | - ${tg_to_dut2_if2} - TG interface towards DUT2 interface 2.
+| | ... | - ${tg_to_dut2_mac_if1} - TG towards DUT2 MAC address interface 1.
+| | ... | - ${tg_to_dut2_mac_if2} - TG towards DUT2 MAC address interface 2.
+| | ... | - ${dut1_node} - DUT1 node.
+| | ... | - ${dut1_to_tg_if1} - DUT1 interface towards TG interface 1.
+| | ... | - ${dut1_to_tg_if2} - DUT1 interface towards TG interface 2.
+| | ... | - ${dut1_to_tg_mac_if1} - DUT1 towards TG MAC address interface 1.
+| | ... | - ${dut1_to_tg_mac_if2} - DUT1 towards TG MAC address interface 2.
+| | ... | - ${dut1_to_dut2_if1} - DUT1 interface towards DUT2 interface 1.
+| | ... | - ${dut1_to_dut2_if2} - DUT1 interface towards DUT2 interface 2.
+| | ... | - ${dut1_to_dut2_mac_if1} - DUT1 towards DUT2 MAC address interface 1.
+| | ... | - ${dut1_to_dut2_mac_if2} - DUT1 towards DUT2 MAC address interface 2.
+| | ... | - ${dut2_node} - DUT2 node.
+| | ... | - ${dut2_to_tg_if1} - DUT2 interface towards TG interface 1.
+| | ... | - ${dut2_to_tg_if2} - DUT2 interface towards TG interface 2.
+| | ... | - ${dut2_to_tg_mac_if1} - DUT2 towards TG MAC address interface 1.
+| | ... | - ${dut2_to_tg_mac_if2} - DUT2 towards TG MAC address interface 2.
+| | ... | - ${dut2_to_dut1_if1} - DUT2 interface towards DUT1 interface 1.
+| | ... | - ${dut2_to_dut1_if2} - DUT2 interface towards DUT1 interface 2.
+| | ... | - ${dut2_to_dut1_mac_if1} - DUT2 towards DUT1 MAC address interface 1.
+| | ... | - ${dut2_to_dut1_mac_if2} - DUT2 towards DUT1 MAC address interface 2.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure path in double-link 3-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \| ${nodes['TG']} \|
+| | ...
+| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg2_node}
+| | Should Be Equal | ${tg_node} | ${tg2_node}
+| | # Compute path TG - DUT1 with two links in between
+| | Append Nodes | ${tg_node} | ${dut1_node} | ${tg_node}
+| | Compute Path | always_same_link=${FALSE}
+| | ${tg_to_dut1_if1} | ${tmp}= | First Interface
+| | ${tg_to_dut1_if2} | ${tmp}= | Last Interface
+| | ${dut1_to_tg_if1} | ${tmp}= | First Ingress Interface
+| | ${dut1_to_tg_if2} | ${tmp}= | Last Egress Interface
+| | # Compute path TG - DUT2 with two links in between
+| | Clear Path
+| | Append Nodes | ${tg_node} | ${dut2_node} | ${tg_node}
+| | Compute Path | always_same_link=${FALSE}
+| | ${tg_to_dut2_if1} | ${tmp}= | First Interface
+| | ${tg_to_dut2_if2} | ${tmp}= | Last Interface
+| | ${dut2_to_tg_if1} | ${tmp}= | First Ingress Interface
+| | ${dut2_to_tg_if2} | ${tmp}= | Last Egress Interface
+| | # Compute path DUT1 - DUT2 with one link in between
+| | Clear Path
+| | Append Nodes | ${dut1_node} | ${dut2_node} | ${dut1_node}
+| | Compute Path | always_same_link=${FALSE}
+| | ${dut1_to_dut2_if1} | ${tmp}= | First Interface
+| | ${dut1_to_dut2_if2} | ${tmp}= | Last Interface
+| | ${dut2_to_dut1_if1} | ${tmp}= | First Ingress Interface
+| | ${dut2_to_dut1_if2} | ${tmp}= | Last Egress Interface
+| | # Set test variables
+| | Set Test Variable | ${tg_to_dut1_if1}
+| | Set Test Variable | ${tg_to_dut1_if2}
+| | Set Test Variable | ${tg_to_dut2_if1}
+| | Set Test Variable | ${tg_to_dut2_if2}
+| | Set Test Variable | ${dut1_to_tg_if1}
+| | Set Test Variable | ${dut1_to_tg_if2}
+| | Set Test Variable | ${dut2_to_tg_if1}
+| | Set Test Variable | ${dut2_to_tg_if2}
+| | Set Test Variable | ${dut1_to_dut2_if1}
+| | Set Test Variable | ${dut1_to_dut2_if2}
+| | Set Test Variable | ${dut2_to_dut1_if1}
+| | Set Test Variable | ${dut2_to_dut1_if2}
+| | Set Test Variable | ${tg_node}
+| | Set Test Variable | ${dut1_node}
+| | Set Test Variable | ${dut2_node}
+| | # Set Mac Addresses
+| | ${tg_to_dut1_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1_if1}
+| | ${tg_to_dut1_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut1_if2}
+| | ${tg_to_dut2_if1_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2_if1}
+| | ${tg_to_dut2_if2_mac}= | Get interface mac | ${tg_node} | ${tg_to_dut2_if2}
+| | ${dut1_to_tg_if1_mac}= | Get interface mac | ${dut1_node}
+| | ... | ${dut1_to_tg_if1}
+| | ${dut1_to_tg_if2_mac}= | Get interface mac | ${dut1_node}
+| | ... | ${dut1_to_tg_if2}
+| | ${dut1_to_dut2_if1_mac}= | Get interface mac | ${dut1_node}
+| | ... | ${dut1_to_dut2_if1}
+| | ${dut1_to_dut2_if2_mac}= | Get interface mac | ${dut1_node}
+| | ... | ${dut1_to_dut2_if2}
+| | ${dut2_to_tg_if1_mac}= | Get interface mac | ${dut2_node}
+| | ... | ${dut2_to_tg_if1}
+| | ${dut2_to_tg_if2_mac}= | Get interface mac | ${dut2_node}
+| | ... | ${dut2_to_tg_if2}
+| | ${dut2_to_dut1_if1_mac}= | Get interface mac | ${dut2_node}
+| | ... | ${dut2_to_dut1_if1}
+| | ${dut2_to_dut1_if2_mac}= | Get interface mac | ${dut2_node}
+| | ... | ${dut2_to_dut1_if2}
+| | Set Test Variable | ${tg_to_dut1_if1_mac}
+| | Set Test Variable | ${tg_to_dut1_if2_mac}
+| | Set Test Variable | ${tg_to_dut2_if1_mac}
+| | Set Test Variable | ${tg_to_dut2_if2_mac}
+| | Set Test Variable | ${dut1_to_tg_if1_mac}
+| | Set Test Variable | ${dut1_to_tg_if2_mac}
+| | Set Test Variable | ${dut1_to_dut2_if1_mac}
+| | Set Test Variable | ${dut1_to_dut2_if2_mac}
+| | Set Test Variable | ${dut2_to_tg_if1_mac}
+| | Set Test Variable | ${dut2_to_tg_if2_mac}
+| | Set Test Variable | ${dut2_to_dut1_if1_mac}
+| | Set Test Variable | ${dut2_to_dut1_if2_mac}
+
+| Set interfaces in double-link 3-node circular topology up
+| | [Documentation]
+| | ... | Set UP state on interfaces in 3-node double link path \
+| | ... | wait until all interfaces are ready.
+| | ...
+| | ... | *Arguments:*
+| | ... | - No arguments.
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned.
+| | ...
+| | ... | _NOTE:_ This KW uses test variables sets in
+| | ... | "Configure path in double-link 3-node circular topology" KW.
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Configure path in double-link 3-node circular topology \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['TG']} \|
+| | ... | \| Interfaces in Double-Link 3-node testing are UP \|
+| | ...
+| | Set Interface State | ${tg_node} | ${tg_to_dut1_if1} | up
+| | Set Interface State | ${tg_node} | ${tg_to_dut1_if2} | up
+| | Set Interface State | ${tg_node} | ${tg_to_dut2_if1} | up
+| | Set Interface State | ${tg_node} | ${tg_to_dut2_if2} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_tg_if1} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_tg_if2} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_tg_if1} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_tg_if2} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_dut2_if1} | up
+| | Set Interface State | ${dut1_node} | ${dut1_to_dut2_if2} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_dut1_if1} | up
+| | Set Interface State | ${dut2_node} | ${dut2_to_dut1_if2} | up
+| | Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | Vpp Node Interfaces Ready Wait | ${dut2_node} \ No newline at end of file