diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/ip/geneve.robot | 74 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/test_teardown.robot | 136 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/traffic.robot | 91 |
3 files changed, 87 insertions, 214 deletions
diff --git a/resources/libraries/robot/ip/geneve.robot b/resources/libraries/robot/ip/geneve.robot deleted file mode 100644 index c9de91d708..0000000000 --- a/resources/libraries/robot/ip/geneve.robot +++ /dev/null @@ -1,74 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.GeneveUtil -| -| Documentation | Keywords for GENEVE tunnels in VPP. - -*** Keywords *** -| Initialize GENEVE L3 mode in circular topology -| | [Documentation] | Initialization of GENEVE L3 mode on DUT1. -| | -| | [Arguments] | ${with_bypass}=${False} -| | -| | Set interfaces in path up -| | -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | 24 -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0] -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | 24 -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] -| | ${next_index}= | VPP Add Graph Node Next -| | ... | ${dut1} | geneve4-input | ethernet-input -| | -| | ${src_ip_int} = | IP To Int | ${gen_tunnel.src_ip} -| | ${dst_ip_int} = | IP To Int | ${gen_tunnel.dst_ip} -| | ${if_ip_int} = | IP To Int | ${gen_tunnel.if_ip} -| | -| | FOR | ${nr} | IN RANGE | 0 | ${n_tunnels} -| | | ${src_ip} = | Int To IP | ${${src_ip_int} + ${nr} * 256} -| | | ${dst_ip} = | Int To IP | ${${dst_ip_int} + ${nr} * 256} -| | | ${if_ip} = | Int To IP | ${${if_ip_int} + ${nr} * 256} -| | | Vpp Route Add -| | | ... | ${dut1} | ${src_ip} | ${gen_tunnel.ip_mask} -| | | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0] -| | | ${tunnel_sw_index}= | Add Geneve Tunnel -| | | ... | ${dut1} | ${gen_tunnel.local} | ${gen_tunnel.remote} -| | | ... | ${${gen_tunnel.vni} + ${nr}} | l3_mode=${True} -| | | ... | next_index=${next_index} -| | | ${tunnel_if_key}= | Get Interface By SW Index -| | | ... | ${dut1} | ${tunnel_sw_index} -| | | ${tunnel_if_mac}= | Get Interface MAC -| | | ... | ${dut1} | ${tunnel_if_key} -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${tunnel_if_key} | ${if_ip} | 24 -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${tunnel_if_key} | ${dut1_if2_ip4} | ${DUT1_vf2_mac}[0] -| | | Vpp Route Add -| | | ... | ${dut1} | ${dst_ip} | ${gen_tunnel.ip_mask} -| | | ... | gateway=${dut1_if2_ip4} | interface=${tunnel_if_key} -| | | Vpp Route Add -| | | ... | ${dut1} | ${gen_tunnel.remote} | 32 -| | | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0] -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${tunnel_if_key} | ${gen_tunnel.local} | ${tunnel_if_mac} -| | | Vpp Route Add -| | | ... | ${dut1} | ${gen_tunnel.local} | 32 | gateway=${if_ip} -| | | Set Interface State -| | | ... | ${dut1} | ${tunnel_if_key} | up -| | END -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60} diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot index d6df417db1..c3d1e8a5ca 100644 --- a/resources/libraries/robot/shared/test_teardown.robot +++ b/resources/libraries/robot/shared/test_teardown.robot @@ -61,22 +61,30 @@ | | END | | Clean Sockets On All Nodes | ${nodes} -# Additional Test Tear Down Actions in alphabetical order -| Additional Test Tear Down Action For acl +| Additional Test Tear Down Action For performance | | [Documentation] -| | ... | Additional teardown for tests which uses ACL feature. +| | ... | Additional teardown for tests which uses performance measurement. +| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. | | -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Settings | ${dut1} -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} +| | ... | TODO: Document what test variables are required or optional. +| | +| | Run Keyword If Test Passed | Return From Keyword +| | ${use_latency} = | Get Use Latency +| | ${rate_for_teardown} = | Get Rate For Teardown +| | Call Resetter +| | Set Test Variable | \${extended_debug} | ${True} +| | Send traffic at specified rate +| | ... | trial_duration=${1.0} +| | ... | rate=${rate_for_teardown} +| | ... | trial_multiplicity=${1} +| | ... | use_latency=${use_latency} +| | ... | duration_limit=${1.0} -| Additional Test Tear Down Action For classify +| Additional Test Tear Down Action For packet_trace | | [Documentation] -| | ... | Additional teardown for tests which uses classify tables. +| | ... | Additional teardown for tests which uses packet trace. | | -| | Run Keyword If Test Failed -| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} +| | Show Packet Trace on All DUTs | ${nodes} | Additional Test Tear Down Action For container | | [Documentation] @@ -86,40 +94,42 @@ | | | Destroy all '${container_group}' containers | | END -| Additional Test Tear Down Action For det44 +| Additional Test Tear Down Action For vhost | | [Documentation] -| | ... | Additional teardown for tests which uses DET44 feature. +| | ... | Additional teardown for tests which uses vhost(s) and VM(s). | | -| | FOR | ${dut} | IN | @{duts} -| | | Run Keyword If Test Failed -| | | ... | Show DET44 verbose | ${nodes['${dut}']} -| | END +| | Show VPP vhost on all DUTs | ${nodes} +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs -| Additional Test Tear Down Action For geneve4 +| Additional Test Tear Down Action For vhost-pt | | [Documentation] -| | ... | Additional teardown for tests which uses GENEVE IPv4 tunnel. +| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). | | -| | FOR | ${dut} | IN | @{duts} -| | | Run Keyword If Test Failed -| | | ... | Show Geneve Tunnel Data | ${nodes['${dut}']} -| | END +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs -| Additional Test Tear Down Action For linux_bridge +| Additional Test Tear Down Action For det44 | | [Documentation] -| | ... | Additional teardown for tests which uses linux_bridge. +| | ... | Additional teardown for tests which uses DET44 feature. | | | | FOR | ${dut} | IN | @{duts} -| | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} +| | | Run Keyword If Test Failed +| | | ... | Show DET44 verbose | ${nodes['${dut}']} | | END -| Additional Test Tear Down Action For macipacl +| Additional Test Tear Down Action For nat-ed | | [Documentation] -| | ... | Additional teardown for tests which uses MACIP ACL feature. +| | ... | Additional teardown for tests which uses NAT feature. | | -| | Run Keyword If Test Failed -| | ... | Vpp Log Macip Acl Settings | ${dut1} -| | Run Keyword If Test Failed -| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} +| | FOR | ${dut} | IN | @{duts} +| | | Show NAT44 Config | ${nodes['${dut}']} +| | | Show NAT44 Summary | ${nodes['${dut}']} +| | | Show NAT Base Data | ${nodes['${dut}']} +| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} +| | END | Additional Test Tear Down Action For namespace | | [Documentation] @@ -129,41 +139,38 @@ | | | Clean Up Namespaces | ${nodes['${dut}']} | | END -| Additional Test Tear Down Action For nat-ed +| Additional Test Tear Down Action For linux_bridge | | [Documentation] -| | ... | Additional teardown for tests which uses NAT feature. +| | ... | Additional teardown for tests which uses linux_bridge. | | | | FOR | ${dut} | IN | @{duts} -| | | Show NAT44 Config | ${nodes['${dut}']} -| | | Show NAT44 Summary | ${nodes['${dut}']} -| | | Show NAT Base Data | ${nodes['${dut}']} -| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} +| | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} | | END -| Additional Test Tear Down Action For packet_trace +| Additional Test Tear Down Action For acl | | [Documentation] -| | ... | Additional teardown for tests which uses packet trace. +| | ... | Additional teardown for tests which uses ACL feature. | | -| | Show Packet Trace on All DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} -| Additional Test Tear Down Action For performance +| Additional Test Tear Down Action For macipacl | | [Documentation] -| | ... | Additional teardown for tests which uses performance measurement. -| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. +| | ... | Additional teardown for tests which uses MACIP ACL feature. | | -| | ... | TODO: Document what test variables are required or optional. +| | Run Keyword If Test Failed +| | ... | Vpp Log Macip Acl Settings | ${dut1} +| | Run Keyword If Test Failed +| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} + +| Additional Test Tear Down Action For classify +| | [Documentation] +| | ... | Additional teardown for tests which uses classify tables. | | -| | Run Keyword If Test Passed | Return From Keyword -| | ${use_latency} = | Get Use Latency -| | ${rate_for_teardown} = | Get Rate For Teardown -| | Call Resetter -| | Set Test Variable | \${extended_debug} | ${True} -| | Send traffic at specified rate -| | ... | trial_duration=${1.0} -| | ... | rate=${rate_for_teardown} -| | ... | trial_multiplicity=${1} -| | ... | use_latency=${use_latency} -| | ... | duration_limit=${1.0} +| | Run Keyword If Test Failed +| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} | Additional Test Tear Down Action For srv6 | | [Documentation] @@ -175,20 +182,3 @@ | | ... | Show SR Steering Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | | ... | Show SR LocalSIDs on all DUTs | ${nodes} - -| Additional Test Tear Down Action For vhost -| | [Documentation] -| | ... | Additional teardown for tests which uses vhost(s) and VM(s). -| | -| | Show VPP vhost on all DUTs | ${nodes} -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs - -| Additional Test Tear Down Action For vhost-pt -| | [Documentation] -| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). -| | -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot index 08f579c9df..1f10787bc1 100644 --- a/resources/libraries/robot/shared/traffic.robot +++ b/resources/libraries/robot/shared/traffic.robot @@ -61,7 +61,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify headers \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify headers \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| | | @@ -120,7 +120,7 @@ | | ... | *Example:* | | | | ... | \| Packet transmission from port to port should fail \ -| | ... | \| \${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ +| | ... | \| ${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ | | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \ | | ... | \| 08:00:27:ee:fd:b3 \| 08:00:27:7d:fd:10 \| | | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} @@ -150,7 +150,7 @@ | | ... | - dst_ip - Packet destination IP address. Type: string | | | | ... | *Example:* -| | ... | \| Send packet and verify marking \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \ | | ... | \| 192.168.122.1 \| | | @@ -190,9 +190,9 @@ | | ... | *Example:* | | | | ... | \| Send VXLAN encapsulated packet and verify received packet \ -| | ... | \| \${tg_node} \| port4 \| port4 \ +| | ... | \| ${tg_node} \| port4 \| port4 \ | | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \ -| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| \${102} \| +| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \| | | | | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if} | | ... | ${tx_src_mac} | ${tx_dst_mac} @@ -231,7 +231,7 @@ | | ... | *Example:* | | | | ... | \| Send ICMP echo request and verify answer \ -| | ... | \| \${nodes['TG']} \| eth2 \ +| | ... | \| ${nodes['TG']} \| eth2 \ | | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \ | | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \| | | @@ -270,14 +270,14 @@ | | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string | | | | ... | *Example:* -| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ | | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ -| | ... | \| \${1001} \| \00} \| 192.168.3.3 \| 192.168.4.4 \ -| | ... | \| 192.168.100.2 \| 192.168.100.3 \| +| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ +| | ... | \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -329,7 +329,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -373,14 +373,14 @@ | | ... | - dst_tun - Destination tunnel IP address. Type: string | | | | ... | *Example:* -| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ -| | ... | \| sixteenbytes_key \| \${auth_alg} \| twentybytessecretkey \ -| | ... | \| \${1001} \| \${1000} \| 192.168.3.3 \| 192.168.4.4 \ -| | ... | \| 192.168.100.2 \| 192.168.100.3 \| +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ +| | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ +| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ +| | ... | \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -429,7 +429,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP GPE encap \| \${nodes['TG']} \ +| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ | | ... | \| 10.0.0.1 \| 32.0.0.1 \ | | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ @@ -476,7 +476,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -529,7 +529,7 @@ | | | | ... | *Example:* | | ... | \| Send IPv6 Packet and verify SRv6 encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 2002:1:: \ | | ... | \| 2003:2:: \| 2003:1:: \| 2002:2:: \| decap=${False} \ | | ... | \| tg_dstsid3=2002:4:: \| dut_dstsid3=2003:4:: \ @@ -589,7 +589,7 @@ | | ... | *Example:* | | | | ... | \| Send TCP or UDP packet and verify network address translations \ -| | ... | \| \${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ +| | ... | \| ${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ | | ... | \| 08:00:27:c9:6a:d5 \| 192.168.0.0 \| 68.142.68.0 \| 20.0.0.0 \ | | ... | \| TCP \| 1024 \| 8080 \| | | @@ -609,46 +609,3 @@ | | ... | --src_port_in ${src_port_in} | --src_port_out ${src_port_out} | | ... | --dst_port ${dst_port} | | Run Traffic Script On Node | nat.py | ${tg_node} | ${args} - -| Send IP packet and verify GENEVE encapsulation in received packets -| | [Documentation] | Send IP packet from TG to DUT. Receive GENEVE packet\ -| | ... | from DUT on TG and verify GENEVE encapsulation. Send GENEVE packet in\ -| | ... | opposite direction and verify received IP packet. -| | -| | ... | *Arguments:* -| | ... | - node - TG node. Type: dictionary -| | ... | - tx_interface - TG Interface 1. Type: string -| | ... | - rx_interface - TG Interface 2. Type: string -| | ... | - tx_dst_mac - Destination MAC for TX interface / DUT interface 1 MAC. -| | ... | Type: string -| | ... | - rx_src_mac - Source MAC for RX interface / DUT interface 2 MAC. -| | ... | Type: string -| | ... | - tun_local_ip - GENEVE tunnel source IP address. Type: string -| | ... | - tun_remote_ip - GENEVE tunnel destination IP address. Type: string -| | ... | - tun_vni - GENEVE tunnel VNI. Type: integer -| | ... | - tun_src_ip - Source IP address of original IP packet / inner source -| | ... | IP address of GENEVE packet. Type: string -| | ... | - tun_dst_ip - Destination IP address of original IP packet / inner -| | ... | destination IP address of GENEVE packet. Type: string -| | -| | ... | *Example:* -| | ... | \| Send IP packet and verify GENEVE encapsulation in received packets\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 1.1.1.2 \| 1.1.1.1 \ -| | ... | \| 1 \| 10.128.1.0 \| 10.0.1.0 \| 24 \|11.0.1.2\| -| | -| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} -| | ... | ${tx_dst_mac} | ${rx_src_mac} | ${tun_local_ip} | ${tun_remote_ip} -| | ... | ${tun_vni} | ${tun_src_ip} | ${tun_dst_ip} -| | -| | ${tx_src_mac}= | Get Interface Mac | ${node} | ${tx_interface} -| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_interface} -| | ${rx_dst_mac}= | Get Interface Mac | ${node} | ${rx_interface} -| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_interface} -| | ${args}= | Catenate | --rx_if ${rx_if_name} | --tx_if ${tx_if_name} -| | ... | --tx_src_mac ${tx_src_mac} | --tx_dst_mac ${tx_dst_mac} -| | ... | --rx_src_mac ${rx_src_mac} | --rx_dst_mac ${rx_dst_mac} -| | ... | --tun_local_ip ${tun_local_ip} | --tun_remote_ip ${tun_remote_ip} -| | ... | --tun_vni ${tun_vni} | --tun_src_ip ${tun_src_ip} -| | ... | --tun_dst_ip ${tun_dst_ip} -| | Run Traffic Script On Node | geneve_tunnel.py | ${node} | ${args} |