diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 92 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/container.robot | 3 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/memif.robot | 30 |
3 files changed, 118 insertions, 7 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 0eb4e612df..c2f591ad0c 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -1712,6 +1712,18 @@ | | Set Test Variable | ${dut2_if1_pci} | | Set Test Variable | ${dut2_if2_pci} +| Add single PCI device to DUTs in 3-node single link topology +| | [Documentation] +| | ... | Add single (first) PCI device on DUT1 to VPP configuration file. +| | ... | Add single (last) PCI device on DUT2 to VPP configuration file. +| | ... +| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} +| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} +| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} +| | Run keyword | DUT2.Add DPDK Dev | ${dut2_if2_pci} +| | Set Test Variable | ${dut1_if1_pci} +| | Set Test Variable | ${dut2_if2_pci} + | Add PCI devices to DUTs in 2-node single link topology | | [Documentation] | | ... | Add PCI devices to VPP configuration file. @@ -1722,6 +1734,14 @@ | | Set Test Variable | ${dut1_if1_pci} | | Set Test Variable | ${dut1_if2_pci} +| Add single PCI device to DUTs in 2-node single link topology +| | [Documentation] +| | ... | Add single (first) PCI device on DUT1 to VPP configuration file. +| | ... +| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} +| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} +| | Set Test Variable | ${dut1_if1_pci} + | Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | [Documentation] | | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP @@ -2504,9 +2524,7 @@ | | | Run Keyword If | ${number}==${nr} | Configure L2XC | | | ... | ${dut2} | ${dut2-memif-${number}-if2} | ${dut2_if2} | | All Vpp Interfaces Ready Wait | ${nodes} -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Show Memif | ${nodes['${dut}']} +| | Show Memif on all DUTs | ${nodes} | Initialize L2 Bridge Domain for '${nr}' memif pairs and '${rxq}' rxqueues in 3-node circular topology | | [Documentation] @@ -2552,6 +2570,68 @@ | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} | | All Vpp Interfaces Ready Wait | ${nodes} -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Show Memif | ${nodes['${dut}']} +| | Show Memif on all DUTs | ${nodes} + +| Initialize L2 xconnect for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Cross +| | ... | connect Memif interface with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${rxq} - Number of Memif RX queues. Type: integer +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 xconnect for single memif in 3-node circular \ +| | ... | topology \| 1 \| 1 \| +| | ... +| | [Arguments] | ${rxq}=${1} | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq} | ${rxq} +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1-memif-${number}-if1} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq} | ${rxq} +| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2-memif-${number}-if1} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} + +| Initialize L2 Bridge Domain for single memif in 3-node circular topology +| | [Documentation] +| | ... | Create single Memif interface on all defined VPP nodes. Put Memif +| | ... | interface to separate L2 bridge domain with one physical interface. +| | ... +| | ... | *Arguments:* +| | ... | - ${rxq} - Number of Memif RX queues. Type: integer +| | ... | - ${number} - Memif ID. Type: integer +| | ... +| | ... | *Note:* +| | ... | Socket paths for Memif are defined in following format: +| | ... | - /tmp/memif-DUT1_VNF${number}-${sid} +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 Bridge Domain for single memif in 3-node circular \ +| | ... | topology \| 1 \| 1 \| +| | ... +| | [Arguments] | ${rxq}=${1} | ${number}=${1} +| | ${sock}= | Set Variable | memif-DUT1_VNF +| | Set up single memif interface on DUT node | ${dut1} | ${sock} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq} | ${rxq} +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${number} +| | Add interface to bridge domain | ${dut1} | ${dut1-memif-${number}-if1} +| | ... | ${number} +| | ${sock}= | Set Variable | memif-DUT2_VNF +| | Set up single memif interface on DUT node | ${dut2} | ${sock} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq} | ${rxq} +| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${number} +| | Add interface to bridge domain | ${dut2} | ${dut2-memif-${number}-if1} +| | ... | ${number} +| | All Vpp Interfaces Ready Wait | ${nodes} +| | Show Memif on all DUTs | ${nodes} diff --git a/resources/libraries/robot/shared/container.robot b/resources/libraries/robot/shared/container.robot index b44e4386a6..201cadcb73 100644 --- a/resources/libraries/robot/shared/container.robot +++ b/resources/libraries/robot/shared/container.robot @@ -109,7 +109,8 @@ | | ... | group on all DUT nodes. | | ... | | Run Keyword | ${group}.Configure VPP In All Containers -| | ... | memif_create_cnt.vat +| | ... | chain_topology=${container_chain_topology} +| | ... | dut1_if=${dut1_if2} | dut2_if=${dut2_if1} | Stop all '${group}' containers | | [Documentation] | Stop all container(s) in specific container group on all diff --git a/resources/libraries/robot/shared/memif.robot b/resources/libraries/robot/shared/memif.robot index 172376ffde..ea080a1b83 100644 --- a/resources/libraries/robot/shared/memif.robot +++ b/resources/libraries/robot/shared/memif.robot @@ -59,3 +59,33 @@ | | Set Interface State | ${dut_node} | ${memif_2} | up | | Set Test Variable | ${${memif_if1}} | ${memif_1} | | Set Test Variable | ${${memif_if2}} | ${memif_2} + +| Set up single memif interface on DUT node +| | [Documentation] | Create single Memif interface on given VPP node. +| | ... +| | ... | *Arguments:* +| | ... | - ${dut_node} - DUT node. Type: dictionary +| | ... | - ${filename} - Socket filename for Memif interface. Type: string +| | ... | - ${mid} - Memif interface ID. Type: integer +| | ... | - ${memif_if} - Name of the Memif interface (Optional). +| | ... | Type: string +| | ... | - ${rxq} - RX queues. Type: integer +| | ... | - ${txq} - TX queues. Type: integer +| | ... | - ${role} - Memif role. Type: string +| | ... +| | ... | _NOTE:_ This KW sets following test case variable: +| | ... | - ${${memif_if}} - Memif interface. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up single memif interface on DUT node \ +| | ... | \| ${nodes['DUT1']} \| sock1 \| 1 \| dut1_memif_if1 \| 1 \| 1 \ +| | ... | \| slave \| +| | ... +| | [Arguments] | ${dut_node} | ${filename} | ${mid}=${1} +| | ... | ${memif_if}=memif_if1 | ${rxq}=${1} | ${txq}=${1} | ${role}=slave +| | ${sid}= | Evaluate | (${mid}*2)-1 +| | ${memif}= | Create memif interface | ${dut_node} | ${filename}${mid}-${sid} +| | ... | ${mid} | ${sid} | rxq=${rxq} | txq=${txq} | role=${role} +| | Set Interface State | ${dut_node} | ${memif} | up +| | Set Test Variable | ${${memif_if}} | ${memif} |