diff options
Diffstat (limited to 'resources/libraries/robot')
3 files changed, 124 insertions, 51 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 641b808173..8c94fc78fb 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -117,16 +117,20 @@ | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | dut1_v4.set_arp | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} -| | dut2_v4.set_arp | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} -| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} -| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.1 | 24 -| | dut1_v4.set_ip | ${dut1_if2} | 1.1.1.1 | 30 -| | dut2_v4.set_ip | ${dut2_if1} | 1.1.1.2 | 30 -| | dut2_v4.set_ip | ${dut2_if2} | 20.20.20.1 | 24 -| | dut1_v4.set_route | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} -| | dut2_v4.set_route | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.1 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 1.1.1.1 | 30 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} +| | ... | 1.1.1.2 | 30 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} +| | ... | 20.20.20.1 | 24 +| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2} +| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} | | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding in 2-node circular topology @@ -141,10 +145,12 @@ | | Set Interface State | ${dut1} | ${dut1_if2} | up | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} -| | dut1_v4.set_arp | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} -| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.2 | 24 -| | dut1_v4.set_ip | ${dut1_if2} | 20.20.20.2 | 24 +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.2 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 20.20.20.2 | 24 | | All Vpp Interfaces Ready Wait | ${nodes} | Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -238,29 +244,29 @@ | | Set Interface State | ${dut2} | ${dut2_vif1} | up | | Set Interface State | ${dut2} | ${dut2_vif2} | up | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} +| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} +| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} +| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} +| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} @@ -354,16 +360,16 @@ | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} | | Add Fib Table | ${dut1} | ${fib_table_1} | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} @@ -412,19 +418,19 @@ | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} | | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} | | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_1} | | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1} | | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_2} | | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2} | | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} @@ -2166,3 +2172,4 @@ | | | ... | ${dut2-memif-${number}-if1} | ${number} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if2} | ${bd_id2} + diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index 0cc6388391..51e117ba9e 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -550,6 +550,13 @@ | | Show VAT History On All DUTs | ${nodes} | | Show statistics on all DUTs | ${nodes} +| Tear down performance mrr test +| | [Documentation] | Common test teardown for max-received-rate performance +| | ... | tests. +| | ... +| | Remove All Added Ports On All DUTs From Topology | ${nodes} +| | Show VAT History On All DUTs | ${nodes} + | Tear down performance test with wrk | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ | | ... | tests. diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 88826a7c9b..fa3174983e 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -370,7 +370,7 @@ | | ... | Througput is calculated as: | | ... | Measured rate per stream * Total number of streams | | ... | Bandwidth is calculated as: -| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC +| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC | | ... | | ... | *Arguments:* | | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string @@ -403,7 +403,7 @@ | | ... | Througput is calculated as: | | ... | Measured rate per stream * Total number of streams | | ... | Bandwidth is calculated as: -| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC +| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC | | ... | | ... | *Arguments:* | | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string @@ -435,6 +435,30 @@ | | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type} | | ... | append=yes +| Display raw results +| | [Documentation] +| | ... | Display raw results from TG in total received/send packets over trial +| | ... | duration in seconds. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - results - Measured results. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Display raw results \| 64 \| results \| +| | ... +| | [Arguments] | ${framesize} | ${results} +| | ... +| | ${framesize}= | Get Frame Size | ${framesize} +| | @{tokens}= | Split String | ${results} | , +| | @{received}= | Split String | @{tokens}[1] | = +| | @{sent}= | Split String | @{tokens}[2] | = +| | ${total_received} = | Set Variable | @{received}[1] +| | ${total_sent} = | Set Variable | @{sent}[1] +| | Set Test Message | MaxReceivedRate_Results [pkts/${perf_trial_duration}sec]: +| | Set Test Message | tx ${total_sent}, rx ${total_received} | append=yes + | Measure latency pps | | [Documentation] | | ... | Send traffic at specified rate. Measure min/avg/max latency @@ -442,7 +466,7 @@ | | ... | *Arguments:* | | ... | - duration - Duration of traffic run [s]. Type: integer | | ... | - rate - Rate for sending packets. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string | | ... | - topology_type - Topology type. Type: string | | ... | | ... | *Example:* @@ -467,7 +491,7 @@ | | ... | *Arguments:* | | ... | - duration - Duration of traffic run [s]. Type: integer | | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string | | ... | - topology_type - Topology type. Type: string | | ... | - fail_on_loss - If True, the keyword fails if loss occurred. | | ... | Type: boolean @@ -480,17 +504,8 @@ | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} | | ... | ${fail_on_loss}=${True} | | ... -| | Clear and show runtime counters with running traffic | ${duration} -| | ... | ${rate} | ${framesize} | ${topology_type} -| | ${ret}= | Is DPDK performance test -| | Run Keyword If | ${ret}==${False} | Clear all counters on all DUTs -| | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True} -| | ... | VPP Enable Traces On All DUTs | ${nodes} -| | Send traffic on tg | ${duration} | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Run Keyword If | ${ret}==${False} | Show statistics on all DUTs | ${nodes} -| | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True} -| | ... | Show Packet Trace On All Duts | ${nodes} +| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize} +| | ... | ${topology_type} | | Run Keyword If | ${fail_on_loss} | No traffic loss occurred | Traffic should pass with partial loss @@ -501,7 +516,7 @@ | | ... | *Arguments:* | | ... | - duration - Duration of traffic run [s]. Type: integer | | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string | | ... | - topology_type - Topology type. Type: string | | ... | - loss_acceptance - Accepted loss during search. Type: float | | ... | - loss_acceptance_type - Percentage or frames. Type: string @@ -515,19 +530,63 @@ | | ... | ${loss_acceptance} | ${loss_acceptance_type} | | ... | ${fail_on_loss}=${True} | | ... +| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize} +| | ... | ${topology_type} +| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted +| | ... | ${loss_acceptance} | ${loss_acceptance_type} + +| Traffic should pass with maximum rate +| | [Documentation] +| | ... | Send traffic at maximum rate. +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string +| | ... | - topology_type - Topology type. Type: string +| | ... | Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... +| | ${results}= | Send traffic at specified rate | ${duration} | ${rate} +| | ... | ${framesize} | ${topology_type} +| | Display raw results | ${framesize} | ${results} + +| Send traffic at specified rate +| | [Documentation] +| | ... | Send traffic at specified rate. +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer/string +| | ... | - topology_type - Topology type. Type: string +| | ... | Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send traffic at specific rate \| 10 \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... | | Clear and show runtime counters with running traffic | ${duration} | | ... | ${rate} | ${framesize} | ${topology_type} | | ${ret}= | Is DPDK performance test | | Run Keyword If | ${ret}==${False} | Clear all counters on all DUTs | | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True} | | ... | VPP Enable Traces On All DUTs | ${nodes} -| | Send traffic on tg | ${duration} | ${rate} | ${framesize} +| | ${results} = | Send traffic on tg | ${duration} | ${rate} | ${framesize} | | ... | ${topology_type} | warmup_time=0 | | Run Keyword If | ${ret}==${False} | Show statistics on all DUTs | ${nodes} | | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True} | | ... | Show Packet Trace On All Duts | ${nodes} -| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted -| | ... | ${loss_acceptance} | ${loss_acceptance_type} +| | Return From Keyword | ${results} | Clear and show runtime counters with running traffic | | [Documentation] @@ -538,7 +597,7 @@ | | ... | *Arguments:* | | ... | - duration - Duration of traffic run [s]. Type: integer | | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string | | ... | - topology_type - Topology type. Type: string | | ... | | ... | *Example:* |