diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 512 |
1 files changed, 94 insertions, 418 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 4701b23144..967ef443fd 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -286,207 +286,141 @@ | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on | | ... | VPP node. Set UP state of all VPP interfaces in path. Create -| | ... | vm_count+1 FIB tables on DUT with multipath routing. Assign each +| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each | | ... | Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with prefix -| | ... | /24 and next hop of neighbour IPv4 address. Setup ARP on all VPP +| | ... | /8 and next hop of neighbour IPv4 address. Setup ARP on all VPP | | ... | interfaces. | | ... | | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: integer +| | ... | - nf_nodes - Number of guest VMs. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-${VM_ID}-1 -| | ... | - /tmp/sock-${VM_ID}-2 +| | ... | - /var/run/vpp/sock-${VM_ID}-1 +| | ... | - /var/run/vpp/sock-${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 forwarding with Vhost-User initialized in a 2-node circular\ | | ... | topology \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if2} | 200.0.0.1 | 30 | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | Add arp on dut | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 200.0.0.2 | ${tg1_if2_mac} +| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2 | | ... | interface=${dut1_if1} | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=2.2.2.2 +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=200.0.0.2 | | ... | interface=${dut1_if2} | vrf=${fib_table_2} -| | ${ip_base_start}= | Set Variable | ${4} -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 | | | ${fib_table_1}= | Evaluate | ${100}+${number} | | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 -| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 -| | | ${ip_net_vif1}= | Set Variable -| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} -| | | ${ip_net_vif2}= | Set Variable -| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} | | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} -| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} -| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} | | | ... | ${fib_table_2} | | | Configure IP addresses on interfaces -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} -| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif1_idx} -| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif2_idx} -| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1_vif1_mac} -| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} -| | | ... | ${dut1_vif2_mac} -| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} -| | | ... | ${number} -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1 | | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2 +| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1 | | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} | Initialize IPv4 forwarding with vhost in 3-node circular topology | | [Documentation] | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on all | | ... | VPP nodes. Set UP state of all VPP interfaces in path. Create -| | ... | vm_count+1 FIB tables on each DUT with multipath routing. Assign +| | ... | nf_nodes+1 FIB tables on each DUT with multipath routing. Assign | | ... | each Virtual interface to FIB table with Physical interface or Virtual | | ... | interface on both nodes. Setup IPv4 addresses with /30 prefix on | | ... | DUT-TG links and /30 prefix on DUT1-DUT2 link. Set routing on all DUT -| | ... | nodes in all FIB tables with prefix /24 and next hop of neighbour IPv4 +| | ... | nodes in all FIB tables with prefix /8 and next hop of neighbour IPv4 | | ... | address. Setup ARP on all VPP interfaces. | | ... | | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: integer +| | ... | - nf_nodes - Number of guest VMs. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-\${VM_ID}-1 -| | ... | - /tmp/sock-\${VM_ID}-2 +| | ... | - /var/run/vpp/sock-\${VM_ID}-1 +| | ... | - /var/run/vpp/sock-\${VM_ID}-2 | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 forwarding with Vhost-User initialized in a 3-node circular\ | | ... | topology \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | Set interfaces in path up | | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${vm_count} +| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} | | Add Fib Table | ${dut1} | ${fib_table_1} -| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} | | Add Fib Table | ${dut1} | ${fib_table_2} -| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_1} -| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} -| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} | | Add Fib Table | ${dut2} | ${fib_table_2} -| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} -| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if2} | ${fib_table_2} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.1 | 30 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if1} | 100.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut1} | ${dut1_if2} | 150.0.0.1 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut2} | ${dut2_if1} | 150.0.0.2 | 30 +| | Configure IP addresses on interfaces +| | ... | ${dut2} | ${dut2_if2} | 200.0.0.1 | 30 +| | Add arp on dut | ${dut1} | ${dut1_if1} | 100.0.0.2 | ${tg_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 200.0.0.2 | ${tg_if2_mac} +| | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=100.0.0.2 | | ... | interface=${dut1_if1} | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=2.2.2.2 +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=150.0.0.2 | | ... | interface=${dut1_if2} | vrf=${fib_table_2} -| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=2.2.2.1 +| | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=150.0.0.1 | | ... | interface=${dut2_if1} | vrf=${fib_table_1} -| | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | gateway=3.3.3.2 +| | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=200.0.0.2 | | ... | interface=${dut2_if2} | vrf=${fib_table_2} -| | ${ip_base_start}= | Set Variable | ${4} -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 | | | ${fib_table_1}= | Evaluate | ${100}+${number} | | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 -| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 -| | | ${ip_net_vif1}= | Set Variable -| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} -| | | ${ip_net_vif2}= | Set Variable -| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} | | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up | | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 +| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 +| | | ... | dut2-vhost-${number}-if1 | dut2-vhost-${number}-if2 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up | | | Add Fib Table | ${dut1} | ${fib_table_1} -| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut1} | ${fib_table_2} -| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_1} -| | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} -| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1} -| | | ... | multipath=${TRUE} | | | Add Fib Table | ${dut2} | ${fib_table_2} -| | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} -| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2} -| | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} @@ -496,51 +430,17 @@ | | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} | | | ... | ${fib_table_2} | | | Configure IP addresses on interfaces -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} -| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} -| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} -| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif1_idx} -| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif2_idx} -| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif1_idx} -| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif2_idx} -| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1_vif1_mac} -| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} -| | | ... | ${dut1_vif2_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} -| | | ... | ${dut2_vif1_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} -| | | ... | ${dut2_vif2_mac} -| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} -| | | ... | ${number} -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | 1.1.1.2 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | 1.1.2.2 | 30 +| | | Vpp Route Add | ${dut1} | 20.0.0.0 | 8 | gateway=1.1.1.1 | | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2 +| | | Vpp Route Add | ${dut1} | 10.0.0.0 | 8 | gateway=1.1.2.1 | | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} -| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | gateway=${ip_net_vif1}.2 +| | | Vpp Route Add | ${dut2} | 20.0.0.0 | 8 | gateway=1.1.1.1 | | | ... | interface=${dut2-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=${ip_net_vif2}.2 +| | | Vpp Route Add | ${dut2} | 10.0.0.0 | 8 | gateway=1.1.2.1 | | | ... | interface=${dut2-vhost-${number}-if2} | vrf=${fib_table_2} | Initialize IPv4 forwarding with VLAN dot1q sub-interfaces in circular topology @@ -1137,7 +1037,7 @@ | | ... | | ... | *Arguments:* | | ... | - dut - DUT node. Type: string -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_nodes - VM count. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for VM are defined in following format: @@ -1148,9 +1048,9 @@ | | ... | | ... | \| Initialize L2 xconnect with Vhost-User on node \| DUT1 \| 1 \| | | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} +| | [Arguments] | ${dut} | ${nf_nodes}=${1} | | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 +| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 | | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 | | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 | | | ${prev_index}= | Evaluate | ${number}-1 @@ -1161,7 +1061,7 @@ | | | ... | ${${dut}-vhost-${prev_index}-if2} | | | Configure L2XC | ${nodes['${dut}']} | ${dut_xconnect_if1} | | | ... | ${${dut}-vhost-${number}-if1} -| | | Run Keyword If | ${number}==${vm_count} | Configure L2XC +| | | Run Keyword If | ${number}==${nf_nodes} | Configure L2XC | | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2} | Initialize L2 xconnect with Vhost-User @@ -1171,18 +1071,18 @@ | | ... | with with physical inteface or Vhost-User interface of another VM. | | ... | | ... | *Arguments:* -| | ... | - vm_count - VM count. Type: integer +| | ... | - nf_nodes - VM count. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 xconnect with Vhost-User \| 1 \| | | ... -| | [Arguments] | ${vm_count}=${1} +| | [Arguments] | ${nf_nodes}=${1} | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Initialize L2 xconnect with Vhost-User on node | ${dut} -| | | ... | vm_count=${vm_count} +| | | ... | nf_nodes=${nf_nodes} | Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology | | [Documentation] @@ -1908,6 +1808,9 @@ | | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | | | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} | | ... +| | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | ... | /var/run/vpp/sock-1-${dut1_bd_id1} +| | ... | /var/run/vpp/sock-1-${dut1_bd_id2} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | | | ... | ${dut1_address} | ${dut1_address_subnet} | | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | @@ -2298,276 +2201,49 @@ | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${nf_dtc} | nf_dtcr=${nf_dtcr} | | ... | rxq_count_int=${rxq_count_int} | | Run Keyword | vnf_manager.Start All VMs | pinning=${True} -| | Run Keyword If | ${use_tuned_cfs} | vnf_manager.Set Scheduler All VMs | | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual -| Configure guest VM with dpdk-testpmd connected via vhost-user +| Configure chains of NFs connected via vhost-user on single node | | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ -| | ... | DPDK testpmd. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. -| | ... | Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - nf_cpus: List of allocated CPUs. Type: list -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT -| | ... | node. Type: integer -| | ... | - jumbo - Set True if jumbo frames are used in the test. -| | ... | Type: bool -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface -| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Note:* -| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and -| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VM with dpdk-testpmd connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock-1-1 \| /tmp/sock-1-2 \ -| | ... | \| DUT1_VM2 \| qemu_id=${2} \| -| | ... -| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} | ${nf_cpus} -| | ... | ${qemu_id}=${1} | ${jumbo}=${False} | ${perf_qemu_qsz}=${1024} -| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True} -| | ... -| | ${nf_cpus_count}= | Get Length | ${nf_cpus} -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | Import Library | resources.libraries.python.QemuUtils | ${nodes['${dut}']} -| | ... | qemu_id=${qemu_id} | smp=${nf_cpus_count} | mem=${2048} -| | ... | WITH NAME | ${vm_name} -| | Run Keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo} | queues=${rxq_count_int} -| | ... | queue_size=${perf_qemu_qsz} -| | Run Keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo} | queues=${rxq_count_int} -| | ... | queue_size=${perf_qemu_qsz} -| | ${vm}= | Run Keyword | ${vm_name}.Qemu Start -| | Run Keyword | ${vm_name}.Qemu Set Affinity | @{nf_cpus} -| | Run Keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9200 | ${EMPTY} -| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} -| | ... | cpu_cnt=${nf_cpus_count} -| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} -| | ... | pmd_fwd_mode=io | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} -| | ... | pmd_rxq=${rxq} | pmd_txq=${rxq} | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} - -| Configure guest VMs with dpdk-testpmd connected via vhost-user on node -| | [Documentation] -| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd for defined number of VMs on all defined\ -| | ... | VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd connected via \ -| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 1024 \| -| | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | -| | ... | ${perf_qemu_qsz}=${1024} | ${use_tuned_cfs}=${False} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${nf_cpus}= | Get Affinity NF | ${nodes} | ${dut} -| | | ... | nf_chains=${1} | nf_nodes=${vm_count} -| | | ... | nf_chain=${1} | nf_node=${number} -| | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${cpu_count_int} -| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 -| | | ${vm}= -| | | ... | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut} | ${sock1} | ${sock2} | ${TEST NAME}${dut}_VM${number} -| | | ... | ${nf_cpus} | qemu_id=${number} | jumbo=${jumbo} -| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs} -| | | Set To Dictionary | ${${dut}_vm_refs} | ${TEST NAME}${dut}_VM${number} -| | | ... | ${vm} - -| Configure guest VMs with dpdk-testpmd connected via vhost-user -| | [Documentation] -| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd defined number of VMs on all defined VPP\ -| | ... | nodes. +| | ... | Start 1..N chains of 1..N QEMU guests (VNFs) with two vhost-user\ +| | ... | interfaces and interconnecting NF on single DUT node. | | ... | | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: int +| | ... | - node - DUT node. Type: dictionary +| | ... | - nf_chains - Number of chains of NFs. Type: integer +| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer | | ... | - jumbo - Jumbo frames are used (True) or are not used (False) | | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd connected via vhost-user\ -| | ... | \| 1 \| False \| 1024 \| -| | ... -| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} -| | ... | ${perf_qemu_qsz}=${1024} | ${use_tuned_cfs}=${False} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Configure guest VMs with dpdk-testpmd connected via vhost-user on node -| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} -| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${45} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual - -| Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | [Documentation] -| | ... | Start QEMU guest with two vhost-user interfaces and interconnecting\ -| | ... | DPDK testpmd. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - sock1 - Socket path for first Vhost-User interface. -| | ... | Type: string -| | ... | - sock2 - Socket path for second Vhost-User interface. -| | ... | Type: string -| | ... | - vm_name - QemuUtil instance name. Type: string -| | ... | - eth0_mac - MAC address of first Vhost interface. Type: string -| | ... | - eth1_mac - MAC address of second Vhost interface. Type: string -| | ... | - nf_cpus: List of allocated CPUs. Type: list -| | ... | - qemu_id - Qemu Id when starting more then one guest VM on DUT -| | ... | node. Type: integer -| | ... | - jumbo - Set True if jumbo frames are used in the test. -| | ... | Type: bool -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int +| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: integer | | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... | - auto_scale - Whether to use same amount of RXQs for vhost interface -| | ... | in VM as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Note:* -| | ... | KW uses test variables \${rxq_count_int}, \${thr_count_int} and -| | ... | \${cpu_count_int} set by "Add worker threads and rxqueues to all DUTs" +| | ... | Type: boolean +| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface +| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean +| | ... | - vnf - Network function as a payload. Type: string | | ... | | ... | *Example:* | | ... -| | ... | \| Configure guest VM with dpdk-testpmd-mac connected via vhost-user \ -| | ... | \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ -| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| +| | ... | \| Configure chains of NFs connected via vhost-user on single node +| | ... | \| DUT1 \| 1 \| 1 \| False \| 1024 \| False \| False \| vpp | | ... -| | [Arguments] | ${dut} | ${sock1} | ${sock2} | ${vm_name} -| | ... | ${eth0_mac} | ${eth1_mac} | ${nf_cpus} | ${qemu_id}=${1} +| | [Arguments] | ${node} | ${nf_chains}=${1} | ${nf_nodes}=${1} | | ... | ${jumbo}=${False} | ${perf_qemu_qsz}=${1024} -| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True} -| | ... -| | ${nf_cpus_count}= | Get Length | ${nf_cpus} -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | Import Library | resources.libraries.python.QemuUtils | ${nodes['${dut}']} -| | ... | qemu_id=${qemu_id} | smp=${nf_cpus_count} | mem=${2048} -| | ... | WITH NAME | ${vm_name} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock1} -| | ... | jumbo_frames=${jumbo} | queues=${rxq_count_int} -| | ... | queue_size=${perf_qemu_qsz} -| | Run keyword | ${vm_name}.Qemu Add Vhost User If | ${sock2} -| | ... | jumbo_frames=${jumbo} | queues=${rxq_count_int} -| | ... | queue_size=${perf_qemu_qsz} -| | ${vm}= | Run keyword | ${vm_name}.Qemu Start -| | Run keyword | ${vm_name}.Qemu Set Affinity | @{nf_cpus} -| | Run keyword If | ${use_tuned_cfs} | ${vm_name}.Qemu Set Scheduler Policy -| | ${max_pkt_len}= | Set Variable If | ${jumbo} | 9200 | ${EMPTY} -| | ${testpmd_cpus}= | Cpu list per node str | ${nodes['${dut}']} | ${0} -| | ... | cpu_cnt=${nf_cpus_count} -| | Dpdk Testpmd Start | ${vm} | eal_corelist=${testpmd_cpus} -| | ... | pmd_fwd_mode=mac | pmd_eth_peer_0=0,${eth0_mac} -| | ... | pmd_eth_peer_1=1,${eth1_mac} | pmd_disable_hw_vlan=${TRUE} -| | ... | pmd_rxd=${perf_qemu_qsz} | pmd_txd=${perf_qemu_qsz} -| | ... | pmd_rxq=${rxq} | pmd_txq=${rxq} | pmd_max_pkt_len=${max_pkt_len} -| | Return From Keyword | ${vm} - -| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node -| | [Documentation] -| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ -| | ... | defined number of VMs on all defined VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node to start guest VM on. Type: dictionary -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | _NOTE:_ This KW expects following test case variables to be set: -| | ... | - cpu_count_int - Number of Physical CPUs allocated for DUT. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via \ -| | ... | vhost-user on node \| DUT1 \| 1 \| False \| 1024 \| -| | ... -| | [Arguments] | ${dut} | ${vm_count}=${1} | ${jumbo}=${False} | -| | ... | ${perf_qemu_qsz}=${1024} | ${use_tuned_cfs}=${False} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${vm_count}+1 -| | | ${nf_cpus}= | Get Affinity NF | ${nodes} | ${dut} -| | | ... | nf_chains=${1} | nf_nodes=${vm_count} -| | | ... | nf_chain=${1} | nf_node=${number} -| | | ... | vs_dtc=${cpu_count_int} | nf_dtc=${cpu_count_int} -| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 -| | | ${vm}= -| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut} | ${sock1} | ${sock2} | ${TEST NAME}${dut}_VM${number} -| | | ... | ${${dut}-vhost-${number}-if1_mac} -| | | ... | ${${dut}-vhost-${number}-if2_mac} | nf_cpus=${nf_cpus} -| | | ... | qemu_id=${number} | jumbo=${jumbo} | perf_qemu_qsz=${perf_qemu_qsz} -| | | ... | use_tuned_cfs=${use_tuned_cfs} -| | | Set To Dictionary | ${${dut}_vm_refs} | ${TEST NAME}${dut}_VM${number} -| | | ... | ${vm} - -| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user -| | [Documentation] -| | ... | Start vm_count QEMU guests with two vhost-user interfaces and\ -| | ... | interconnecting DPDK testpmd with fwd mode set to mac rewrite for\ -| | ... | defined number of VMs on all defined VPP nodes. -| | ... -| | ... | *Arguments:* -| | ... | - vm_count - Number of guest VMs. Type: int -| | ... | - jumbo - Jumbo frames are used (True) or are not used (False) -| | ... | in the test. Type: boolean -| | ... | - perf_qemu_qsz - Virtio Queue Size. Type: int -| | ... | - use_tuned_cfs - Set True if CFS RR should be used for Qemu SMP. -| | ... | Type: bool -| | ... -| | ... | *Example:* +| | ... | ${use_tuned_cfs}=${False} | ${auto_scale}=${True} | ${vnf}=vpp | | ... -| | ... | \| Configure guest VMs with dpdk-testpmd-mac connected via vhost-user\ -| | ... | \| 1 \| False \| 1024 \| -| | ... -| | [Arguments] | ${vm_count}=${1} | ${jumbo}=${False} -| | ... | ${perf_qemu_qsz}=${1024} | ${use_tuned_cfs}=${False} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Configure guest VMs with dpdk-testpmd-mac connected via vhost-user on node -| | | ... | ${dut} | vm_count=${vm_count} | jumbo=${jumbo} -| | | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${False} -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${45} +| | Import Library | resources.libraries.python.QemuManager | ${nodes} +| | ... | WITH NAME | vnf_manager +| | Run Keyword | vnf_manager.Initialize +| | Run Keyword | vnf_manager.Construct VMs on node +| | ... | node=${node} +| | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} +| | ... | perf_qemu_qsz=${perf_qemu_qsz} | use_tuned_cfs=${use_tuned_cfs} +| | ... | auto_scale=${auto_scale} | vnf=${vnf} +| | ... | tg_if1_mac=${tg_if1_mac} | tg_if2_mac=${tg_if2_mac} +| | ... | vs_dtc=${cpu_count_int} | nf_dtc=${nf_dtc} | nf_dtcr=${nf_dtcr} +| | ... | rxq_count_int=${rxq_count_int} +| | Run Keyword | vnf_manager.Start All VMs | pinning=${True} +| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=Virtual | Initialize LISP IPv4 forwarding in 3-node circular topology |