diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/overlay/lisp.robot | 153 | ||||
| -rw-r--r-- | resources/libraries/robot/overlay/lispgpe.robot | 2 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/default.robot | 8 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/traffic.robot | 138 |
4 files changed, 300 insertions, 1 deletions
diff --git a/resources/libraries/robot/overlay/lisp.robot b/resources/libraries/robot/overlay/lisp.robot new file mode 100644 index 0000000000..826cc3a7b1 --- /dev/null +++ b/resources/libraries/robot/overlay/lisp.robot @@ -0,0 +1,153 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.LispSetup.LispAdjacency +| Library | resources.libraries.python.LispSetup.LispEidTableMap +| Library | resources.libraries.python.LispSetup.LispLocalEid +| Library | resources.libraries.python.LispSetup.LispLocator +| Library | resources.libraries.python.LispSetup.LispLocatorSet +| Library | resources.libraries.python.LispSetup.LispRemoteMapping +| Resource | resources/libraries/robot/shared/default.robot + +*** Keywords *** +| Configure topology for IPv4 LISP testing +| | [Documentation] | Setup topology for IPv4 LISP testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv4 LISP testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} + +| Configure topology for IPv6 LISP testing +| | [Documentation] | Setup topology fo IPv6 LISP testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv6 LISP testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} + +| Configure LISP in 2-node circular topology +| | [Documentation] | Configure LISP topology in 2-node circular topology. +| | ... +| | ... | *Arguments:* +| | ... | - dut1 - DUT1 node. Type: dictionary +| | ... | - dut1_if - DUT1 node interface. Type: string +| | ... | - dut1_int_index - DUT1 node interface index. Type: integer +| | ... | - locator_set - Locator set values. Type: dictionary +| | ... | - dut1_eid - DUT1 node eid address. Type: dictionary +| | ... | - dut1_static_adjacency - DUT1 static adjacency. Type: dictionary +| | ... | - is_gpe - To enable GPE. Other than zero to enable Type: integer +| | ... | - vni_table - vni table Eid Table Mapping Type: integer +| | ... | - vrf_table - vrf table Eid Table Mapping Type: integer +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... | \| Configure LISP in 2-node circular topology \ +| | ... | \| ${dut1} \| ${interface_name} \ +| | ... | \| None \| ${locator_set} \| ${dut1_eid} \ +| | ... | \| ${dut1_static_adjacency} \| +| | ... +| | [Arguments] +| | ... | ${dut1} | ${dut1_if} | ${dut1_int_index} +| | ... | ${locator_set} | ${dut1_eid} +| | ... | ${dut1_static_adjacency} +| | ... | ${is_gpe}=0 +| | ... | ${vni_table}=0 | ${vrf_table}=0 +| | ... +# DUT1 settings: +| | ${dut1_int_index}= | Run Keyword If | ${dut1_int_index} is None +| | ... | Get Interface Sw Index | ${dut1} | ${dut1_if} +| | ... | ELSE | Set Variable | ${dut1_int_index} +| | Enable Lisp | ${dut1} +| | Run keyword if | ${is_gpe} != 0 +| | ... | Enable Lisp GPE | ${dut1} +| | Vpp Add Lisp Locator Set | ${dut1} | ${locator_set['locator_name']} +| | Vpp Add Lisp Locator | ${dut1} | ${locator_set['locator_name']} +| | ... | ${dut1_int_index} | ${locator_set['priority']} +| | ... | ${locator_set['weight']} +| | Run keyword if | ${is_gpe} != 0 +| | ... | Vpp Lisp Eid Table Mapping | ${dut1} +| | ... | ${vni_table} +| | ... | vrf=${vrf_table} +| | Vpp Add Lisp Local Eid | ${dut1} | ${dut1_eid['locator_name']} +| | ... | ${dut1_eid['vni']} | ${dut1_eid['eid']} | ${dut1_eid['prefix']} +| | Vpp Add Lisp Remote Mapping | ${dut1} | ${dut1_static_adjacency['vni']} +| | ... | ${dut1_static_adjacency['deid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['seid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['rloc']} +| | Vpp Add Lisp Adjacency | ${dut1} | ${dut1_static_adjacency['vni']} +| | ... | ${dut1_static_adjacency['deid']} +| | ... | ${dut1_static_adjacency['prefix']} +| | ... | ${dut1_static_adjacency['seid']} +| | ... | ${dut1_static_adjacency['prefix']} + +| Configure topology for IPv6 LISPoIP4 testing +| | [Documentation] | Setup topology fo IPv6 LISPoIPV4 testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv6 LISPoIP4 testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac} + +| Configure topology for IPv4 LISPoIP6 testing +| | [Documentation] | Setup topology fo IPv4 LISPoIPV6 testing. +| | ... +| | ... | *Example:* +| | ... | \| Configure topology for IPv4 LISPoIP6 testing \| +| | ... +| | Set interfaces in path up +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac} +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac} diff --git a/resources/libraries/robot/overlay/lispgpe.robot b/resources/libraries/robot/overlay/lispgpe.robot index d5115d8242..5c611a56a9 100644 --- a/resources/libraries/robot/overlay/lispgpe.robot +++ b/resources/libraries/robot/overlay/lispgpe.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2019 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index 3da2026ba6..8985bd2434 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -26,6 +26,10 @@ | Library | resources.libraries.python.Cop | Library | resources.libraries.python.DUTSetup | Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.IPUtil +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.NodePath | Library | resources.libraries.python.Namespaces | Library | resources.libraries.python.PapiHistory | Library | resources.libraries.python.SchedUtils @@ -49,6 +53,9 @@ | Resource | resources/libraries/robot/l2/l2_xconnect.robot | Resource | resources/libraries/robot/l2/tagging.robot | Resource | resources/libraries/robot/overlay/srv6.robot +| Resource | resources/libraries/robot/overlay/lisp.robot +| Resource | resources/libraries/robot/overlay/lispgpe.robot +| Resource | resources/libraries/robot/overlay/lisp_api.robot | Resource | resources/libraries/robot/performance/performance_configuration.robot | Resource | resources/libraries/robot/performance/performance_limits.robot | Resource | resources/libraries/robot/performance/performance_utils.robot @@ -59,6 +66,7 @@ | Resource | resources/libraries/robot/shared/suite_setup.robot | Resource | resources/libraries/robot/shared/test_teardown.robot | Resource | resources/libraries/robot/shared/test_setup.robot +| Resource | resources/libraries/robot/shared/testing_path.robot | Resource | resources/libraries/robot/shared/traffic.robot | Resource | resources/libraries/robot/shared/vm.robot diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot index dc3cc054b2..294d0a7deb 100644 --- a/resources/libraries/robot/shared/traffic.robot +++ b/resources/libraries/robot/shared/traffic.robot @@ -886,3 +886,141 @@ | | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args} | | ... | ${args} --dst_tun ${r_tunnel} | | Run Traffic Script On Node | ipsec.py | ${node} | ${args} + +| Send packet and verify LISP encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ +| | ... | \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | Run Traffic Script On Node | lisp/lisp_check.py | ${tg_node} +| | ... | ${args} + +| Send packet and verify LISP GPE encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP-GPE encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ +| | ... | \| 10.0.0.1 \| 32.0.0.1 \ +| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ +| | ... | \| 10.0.1.1 \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node} +| | ... | ${args} + +| Send packet and verify LISPoTunnel encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... | - ot_mode - overlay tunnel mode. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ +| | ... | \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} | ${ot_mode} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | ... | --ot_mode | ${ot_mode} +| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node} +| | ... | ${args} |