diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/cop.robot | 85 | ||||
| -rw-r--r-- | resources/libraries/robot/traffic.robot | 108 |
2 files changed, 193 insertions, 0 deletions
diff --git a/resources/libraries/robot/cop.robot b/resources/libraries/robot/cop.robot new file mode 100644 index 0000000000..c958b3e211 --- /dev/null +++ b/resources/libraries/robot/cop.robot @@ -0,0 +1,85 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/counters.robot +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Cop +| Library | resources.libraries.python.Routing +| Library | resources.libraries.python.TrafficScriptExecutor +| Library | resources.libraries.python.InterfaceUtil + +*** Keywords *** +| Setup Nodes And Variables +| | [Documentation] | Setup of test variables and bring interfaces up. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | - {tg_node} : Node where to start/end. Type: dictionary +| | ... | - {dut1_node} - Next node from start. Type: dictionary +| | ... | - {dut2_node} - Third node. Type: dictionary +| | ... +| | ... | *Return:* +| | ... +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Setup Nodes And Variables \| ${nodes['TG']} \ +| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \| +| | ... +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... +| | ... | - ${tg_if1} - Iterface of TG towards DUT (1st). +| | ... | - ${tg_if2} - Interface of TG towards DUT (2nd). +| | ... | - ${dut1_if1} - Interface of DUT towards TG (1st). +| | ... | - ${dut1_if2} - Interface of DUT towards TG (2nd). +| | ... | - ${dut2_if1} - Interface of DUT2 towards DUT (1st). +| | ... | - ${dut2_if2} - Interface of DUT2 towards TG (2nd). +| | ... | - ${tg_if1_mac} - MAC address of TG interface (1st). +| | ... | - ${tg_if2_mac} - MAC address of TG interface (2nd). +| | ... | - ${dut1_if1_mac} - MAC address of DUT1 interface (1st). +| | ... | - ${dut1_if2_mac} - MAC address of DUT1 interface (2nd). +| | ... +| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} +| | Append Nodes | ${tg_node} | ${dut1_node} | ${dut2_node} | +| | ... | ${tg_node} +| | Compute Path +| | ${tg_if1} | ${tg}= | Next Interface +| | ${dut1_if1} | ${dut1}= | Next Interface +| | ${dut1_if2} | ${dut1}= | Next Interface +| | ${dut2_if1} | ${dut2}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | ${tg_if2} | ${tg}= | Next Interface +| | ${tg_if1_mac}= | Get interface mac | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get interface mac | ${tg} | ${tg_if2} +| | ${dut1_if1_mac}= | Get interface mac | ${dut1} | ${dut1_if1} +| | ${dut1_if2_mac}= | Get interface mac | ${dut1} | ${dut1_if2} +| | Set Test Variable | ${tg_if1} +| | Set Test Variable | ${tg_if2} +| | Set Test Variable | ${dut1_if1} +| | Set Test Variable | ${dut1_if2} +| | Set Test Variable | ${dut2_if1} +| | Set Test Variable | ${dut2_if2} +| | Set Test Variable | ${tg_if1_mac} +| | Set Test Variable | ${tg_if2_mac} +| | Set Test Variable | ${dut1_if1_mac} +| | Set Test Variable | ${dut1_if2_mac} +| | Set Interface State | ${tg_node} | ${tg_if1} | up +| | Set Interface State | ${tg_node} | ${tg_if2} | up +| | Set Interface State | ${dut1_node} | ${dut1_if1} | up +| | Set Interface State | ${dut1_node} | ${dut1_if2} | up +| | Set Interface State | ${dut2_node} | ${dut2_if1} | up +| | Set Interface State | ${dut2_node} | ${dut2_if2} | up +| | All Vpp Interfaces Ready Wait | ${nodes} diff --git a/resources/libraries/robot/traffic.robot b/resources/libraries/robot/traffic.robot new file mode 100644 index 0000000000..b97a6d4360 --- /dev/null +++ b/resources/libraries/robot/traffic.robot @@ -0,0 +1,108 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic keywords""" + +*** Settings *** +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.TrafficScriptExecutor +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.Routing +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.topology.Topology +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/counters.robot +| Documentation | Traffic keywords + +*** Keywords *** +| Send Packet And Check Headers +| | [Documentation] | Sends packet from IP (with source mac) to IP +| | ... | (with dest mac). There has to be 4 MAC addresses +| | ... | when using 2 node + +| | ... | xconnect (one for each eth). +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on example: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - {tg_node} : Node to execute scripts on (TG). Type: dictionary +| | ... | - {src_ip} - IP of source interface (TG-if1). Type: int +| | ... | - {dst_ip} - IP of destination interface (TG-if2). Type: int +| | ... | - {tx_src_port} - Interface of TG-if1. Type: string +| | ... | - {tx_src_mac} - MAC address of TG-if1. Type: string +| | ... | - {tx_dst_mac} - MAC address of DUT-if1. Type: string +| | ... | - {rx_port} - Interface of TG-if1. Type: string +| | ... | - {rx_src_mac} - MAC address of DUT1-if2. Type: string +| | ... | - {rx_dst_mac} - MAC address of TG-if2. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send Packet And Check Headers \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac | +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac | +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} | +| | ... | --tx_if | ${tx_src_port} | --rx_if | ${rx_port} +| | Run Traffic Script On Node | send_icmp_check_headers.py | ${tg_node} | +| | ... | ${args} + +| Send packet from Port to Port should failed +| | [Documentation] | Sends packet from ip (with specified mac) to ip +| | ... | (with dest mac). Using keyword : Send packet And Check +| | ... | Headers and subsequently checks the return value +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on example: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - {tg_node} : Node to execute scripts on (TG). Type: dictionary +| | ... | - {src_ip} - IP of source interface (TG-if1). Type: int +| | ... | - {dst_ip} - IP of destination interface (TG-if2). Type: int +| | ... | - {tx_src_port} - Interface of TG-if1. Type: string +| | ... | - {tx_src_mac} - MAC address of TG-if1. Type: string +| | ... | - {tx_dst_mac} - MAC address of DUT-if1. Type: string +| | ... | - {rx_port} - Interface of TG-if1. Type: string +| | ... | - {rx_src_mac} - MAC address of DUT1-if2. Type: string +| | ... | - {rx_dst_mac} - MAC address of TG-if2. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet from Port to Port should failed \| ${nodes['TG']} \ +| | ... | \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \ +| | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \ +| | ... | \| 08:00:27:7d:fd:10 \| +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} | +| | ... | ${rx_dst_mac} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac | +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac | +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} | +| | ... | --tx_if | ${tx_src_port} | --rx_if | ${rx_port} +| | Run Keyword And Expect Error | ICMP echo Rx timeout | +| | ... | Run Traffic Script On Node | send_icmp_check_headers.py +| | ... | ${tg_node} | ${args} +l
\ No newline at end of file |