diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/bgp.robot | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/bgp.robot b/resources/libraries/robot/honeycomb/bgp.robot new file mode 100644 index 0000000000..d4c2d6b0a2 --- /dev/null +++ b/resources/libraries/robot/honeycomb/bgp.robot @@ -0,0 +1,173 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.BGP.BGPKeywords +| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords + +*** Keywords *** +| No BGP peers should be configured +| | [Documentation] | Uses Honeycomb API to read BGP configuration and checks +| | ... | if there ary BGP peers conffigured. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| No BGP peers should be configured \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | ${oper_data}= | Get Full BGP Configuration | ${node} +| | Should be Empty | ${oper_data['bgp-openconfig-extensions:bgp']['neighbors']} + +| Honeycomb adds BGP peer +| | [Documentation] | Uses Honeycomb API to add a BGP peer. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - address - IP address of the peer. Type: string +| | ... | - data - Peer configuration data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \ +| | ... | \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${address} | ${data} +| | ... +| | Add BGP Peer | ${node} | ${address} | ${data} + +| BGP Peer From Honeycomb Should be +| | [Documentation] | Uses Honeycomb API to verify BGP peer operational data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - address - IP address of the peer. Type: string +| | ... | - data - Peer configuration data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| BGP Peer From Honeycomb Should be \ +| | ... | \| ${nodes['DUT1']} \| 192.168.0.1 \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${address} | ${data} +| | ... +| | ${oper_data}= | Get BGP Peer | ${node} | ${address} +| | Compare Data Structures | ${oper_data} | ${data} + +| Honeycomb removes BGP peer +| | [Documentation] | Uses Honeycomb API to add a BGP peer. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - address - IP address of the peer. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \| +| | ... +| | [Arguments] | ${node} | ${address} +| | ... +| | Remove BGP Peer | ${node} | ${address} + +| Honeycomb configures BGP route +| | [Documentation] | Uses Honeycomb API to add a BGP route\ +| | ... | to the specified peer. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - peer_address - IP address of the peer. Type: string +| | ... | - data - Peer configuration data. Type: dictionary +| | ... | - route_address - IP address of the route. Type: string +| | ... | - route_index - Numeric index of the route under the peer.\ +| | ... | Type: integer +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \ +| | ... | \| ${data} \| 192.168.0.2 \| ${0} \| ipv4 \| +| | ... +| | [Arguments] | ${node} | ${peer_address} | ${data} +| | ... | ${route_address} | ${route_index} | ${ip_version} +| | ... +| | Configure BGP Route | ${node} | ${peer_address} | ${data} +| | ... | ${route_address} | ${route_index} | ${ip_version} + +| BGP Route From Honeycomb Should be +| | [Documentation] | Uses Honeycomb API to verify BGP route operational data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - peer_address - IP address of the peer. Type: string +| | ... | - data - Peer configuration data. Type: dictionary +| | ... | - route_address - IP address of the route. Type: string +| | ... | - route_index - Numeric index of the route under the peer.\ +| | ... | Type: integer +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| BGP Peers From Honeycomb Should Include \ +| | ... | \| ${nodes['DUT1']} \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${peer_address} | ${data} +| | ... | ${route_address} | ${route_index} | ${ip_version} +| | ... +| | ${oper_data}= | Get BGP Route | ${node} | ${peer_address} +| | ... | ${route_address} | ${route_index} | ${ip_version} +| | Compare Data Structures | ${oper_data} | ${data} + +| Honeycomb removes BGP route +| | [Documentation] | Uses Honeycomb API to remove a BGP route. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - peer_address - IP address of the peer. Type: string +| | ... | - route_address - IP address of the route. Type: string +| | ... | - route_index - Numeric index of the route under the peer.\ +| | ... | Type: integer +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes BGP route \| ${nodes['DUT1']} \| 192.168.0.1 \ +| | ... | \| 192.168.0.2 \| ${0} \| ipv4 \| +| | ... +| | [Arguments] | ${node} | ${peer_address} | ${route_address} +| | ... | ${route_index} | ${ip_version} +| | ... +| | Remove BGP Route | ${node} | ${peer_address} | ${route_address} +| | ... | ${route_index} | ${ip_version} + +| No BGP routes should be configured +| | [Documentation] | Uses Honeycomb API to verify that no BGP routes\ +| | ... | are configured under the specified peer. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - peer_address - IP address of the peer. Type: string +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| No BGP routes should be configured \| ${nodes['DUT1']} \ +| | ... | \| 192.168.0.1 \| ipv4 \| +| | ... +| | [Arguments] | ${node} | ${peer_address} | ${ip_version} +| | ... +| | ${oper_data}= | Get All Peer Routes +| | ... | ${node} | ${peer_address} | ${ip_version} +| | Should be Empty | ${oper_data['bgp-inet:${ip_version}-routes']} |