diff options
Diffstat (limited to 'resources/libraries/robot')
| -rw-r--r-- | resources/libraries/robot/policer.robot | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/resources/libraries/robot/policer.robot b/resources/libraries/robot/policer.robot new file mode 100644 index 0000000000..bf67ab7894 --- /dev/null +++ b/resources/libraries/robot/policer.robot @@ -0,0 +1,99 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/testing_path.robot +| Library | resources.libraries.python.Policer +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.IPv4Util +| Library | resources.libraries.python.TrafficScriptExecutor +| Library | resources.libraries.python.IPv6Util +| Library | resources.libraries.python.IPv6Setup +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Documentation | *Policer keywords* + +*** Keywords *** +| Setup Topology for IPv4 policer testing +| | [Documentation] | Setup topology for IPv4 policer testing. +| | ... +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - dut_to_tg_if1_ip - DUT first interface IP address. Type: string +| | ... | - dut_to_tg_if2_ip - DUT second interface IP address. Type: string +| | ... | - tg_to_dut_if1_ip - TG first interface IP address. Type: string +| | ... | - tg_to_dut_if2_ip - TG second interface IP address. Type: string +| | Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | Interfaces in 2-node path are up +| | Set Interface Address | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${dut_to_tg_if1_ip4} | ${ip4_plen} +| | Set Interface Address | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${dut_to_tg_if2_ip4} | ${ip4_plen} +| | dut1_v4.Set ARP | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip4} +| | ... | ${tg_to_dut_if2_mac} +| | Set Test Variable | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_ip4} +| | Set Test Variable | ${dut_to_tg_if2_ip} | ${dut_to_tg_if2_ip4} +| | Set Test Variable | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_ip4} +| | Set Test Variable | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_ip4} + +| Setup Topology for IPv6 policer testing +| | [Documentation] | Setup topology for IPv6 policer testing. +| | ... +| | ... | _NOTE:_ This KW sets following test case variables: +| | ... | - dut_to_tg_if1_ip - DUT first interface IP address. Type: string +| | ... | - dut_to_tg_if2_ip - DUT second interface IP address. Type: string +| | ... | - tg_to_dut_if1_ip - TG first interface IP address. Type: string +| | ... | - tg_to_dut_if2_ip - TG second interface IP address. Type: string +| | Path for 2-node testing is set | ${nodes['TG']} | ${nodes['DUT1']} +| | ... | ${nodes['TG']} +| | Interfaces in 2-node path are up +| | Vpp Set If IPv6 Addr | ${dut_node} | ${dut_to_tg_if1} +| | ... | ${dut_to_tg_if1_ip6} | ${ip6_plen} +| | Vpp Set If IPv6 Addr | ${dut_node} | ${dut_to_tg_if2} +| | ... | ${dut_to_tg_if2_ip6} | ${ip6_plen} +| | Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip6} +| | ... | ${tg_to_dut_if2_mac} +| | Vpp All RA Suppress Link Layer | ${nodes} +| | Set Test Variable | ${dut_to_tg_if1_ip} | ${dut_to_tg_if1_ip6} +| | Set Test Variable | ${dut_to_tg_if2_ip} | ${dut_to_tg_if2_ip6} +| | Set Test Variable | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_ip6} +| | Set Test Variable | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_ip6} + +| Send Packet and Verify Marking +| | [Documentation] | Send packet and verify DSCP of the received packet. +| | ... +| | ... | *Arguments:* +| | ... | - node - TG node. Type: dictionary +| | ... | - tx_if - TG transmit interface. Type: string +| | ... | - rx_if - TG receive interface. Type: string +| | ... | - src_mac - Packet source MAC. Type: string +| | ... | - dst_mac - Packet destination MAC. Type: string +| | ... | - src_ip - Packet source IP address. Type: string +| | ... | - dst_ip - Packet destination IP address. Type: string +| | ... | - dscp - DSCP value to verify. Type: enum +| | ... +| | ... | *Example:* +| | ... | \| ${dscp}= \| DSCP AF22 \| +| | ... | \| Send Packet and Verify Marking \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \ +| | ... | \| 192.168.122.1 \| ${dscp} \| +| | [Arguments] | ${node} | ${tx_if} | ${rx_if} | ${src_mac} | ${dst_mac} +| | ... | ${src_ip} | ${dst_ip} | ${dscp} +| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_if} +| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_if} +| | ${args}= | Traffic Script Gen Arg | ${rx_if_name} | ${tx_if_name} +| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip} +| | ${dscp_num}= | Get DSCP Num Value | ${dscp} +| | ${args}= | Set Variable | ${args} --dscp ${dscp_num} +| | Run Traffic Script On Node | policer.py | ${node} | ${args} |