aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot')
-rw-r--r--resources/libraries/robot/cop.robot85
-rw-r--r--resources/libraries/robot/traffic.robot108
2 files changed, 193 insertions, 0 deletions
diff --git a/resources/libraries/robot/cop.robot b/resources/libraries/robot/cop.robot
new file mode 100644
index 0000000000..c958b3e211
--- /dev/null
+++ b/resources/libraries/robot/cop.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Cop
+| Library | resources.libraries.python.Routing
+| Library | resources.libraries.python.TrafficScriptExecutor
+| Library | resources.libraries.python.InterfaceUtil
+
+*** Keywords ***
+| Setup Nodes And Variables
+| | [Documentation] | Setup of test variables and bring interfaces up.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | - {tg_node} : Node where to start/end. Type: dictionary
+| | ... | - {dut1_node} - Next node from start. Type: dictionary
+| | ... | - {dut2_node} - Third node. Type: dictionary
+| | ...
+| | ... | *Return:*
+| | ...
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Setup Nodes And Variables \| ${nodes['TG']} \
+| | ... | \| ${nodes['DUT1']} \| ${nodes['DUT2']} \|
+| | ...
+| | ... | _NOTE:_ This KW sets following test case variables:
+| | ...
+| | ... | - ${tg_if1} - Iterface of TG towards DUT (1st).
+| | ... | - ${tg_if2} - Interface of TG towards DUT (2nd).
+| | ... | - ${dut1_if1} - Interface of DUT towards TG (1st).
+| | ... | - ${dut1_if2} - Interface of DUT towards TG (2nd).
+| | ... | - ${dut2_if1} - Interface of DUT2 towards DUT (1st).
+| | ... | - ${dut2_if2} - Interface of DUT2 towards TG (2nd).
+| | ... | - ${tg_if1_mac} - MAC address of TG interface (1st).
+| | ... | - ${tg_if2_mac} - MAC address of TG interface (2nd).
+| | ... | - ${dut1_if1_mac} - MAC address of DUT1 interface (1st).
+| | ... | - ${dut1_if2_mac} - MAC address of DUT1 interface (2nd).
+| | ...
+| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node}
+| | Append Nodes | ${tg_node} | ${dut1_node} | ${dut2_node} |
+| | ... | ${tg_node}
+| | Compute Path
+| | ${tg_if1} | ${tg}= | Next Interface
+| | ${dut1_if1} | ${dut1}= | Next Interface
+| | ${dut1_if2} | ${dut1}= | Next Interface
+| | ${dut2_if1} | ${dut2}= | Next Interface
+| | ${dut2_if2} | ${dut2}= | Next Interface
+| | ${tg_if2} | ${tg}= | Next Interface
+| | ${tg_if1_mac}= | Get interface mac | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get interface mac | ${tg} | ${tg_if2}
+| | ${dut1_if1_mac}= | Get interface mac | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_mac}= | Get interface mac | ${dut1} | ${dut1_if2}
+| | Set Test Variable | ${tg_if1}
+| | Set Test Variable | ${tg_if2}
+| | Set Test Variable | ${dut1_if1}
+| | Set Test Variable | ${dut1_if2}
+| | Set Test Variable | ${dut2_if1}
+| | Set Test Variable | ${dut2_if2}
+| | Set Test Variable | ${tg_if1_mac}
+| | Set Test Variable | ${tg_if2_mac}
+| | Set Test Variable | ${dut1_if1_mac}
+| | Set Test Variable | ${dut1_if2_mac}
+| | Set Interface State | ${tg_node} | ${tg_if1} | up
+| | Set Interface State | ${tg_node} | ${tg_if2} | up
+| | Set Interface State | ${dut1_node} | ${dut1_if1} | up
+| | Set Interface State | ${dut1_node} | ${dut1_if2} | up
+| | Set Interface State | ${dut2_node} | ${dut2_if1} | up
+| | Set Interface State | ${dut2_node} | ${dut2_if2} | up
+| | All Vpp Interfaces Ready Wait | ${nodes}
diff --git a/resources/libraries/robot/traffic.robot b/resources/libraries/robot/traffic.robot
new file mode 100644
index 0000000000..b97a6d4360
--- /dev/null
+++ b/resources/libraries/robot/traffic.robot
@@ -0,0 +1,108 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic keywords"""
+
+*** Settings ***
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.TrafficScriptExecutor
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Routing
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.topology.Topology
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Documentation | Traffic keywords
+
+*** Keywords ***
+| Send Packet And Check Headers
+| | [Documentation] | Sends packet from IP (with source mac) to IP
+| | ... | (with dest mac). There has to be 4 MAC addresses
+| | ... | when using 2 node +
+| | ... | xconnect (one for each eth).
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on example:
+| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - {tg_node} : Node to execute scripts on (TG). Type: dictionary
+| | ... | - {src_ip} - IP of source interface (TG-if1). Type: int
+| | ... | - {dst_ip} - IP of destination interface (TG-if2). Type: int
+| | ... | - {tx_src_port} - Interface of TG-if1. Type: string
+| | ... | - {tx_src_mac} - MAC address of TG-if1. Type: string
+| | ... | - {tx_dst_mac} - MAC address of DUT-if1. Type: string
+| | ... | - {rx_port} - Interface of TG-if1. Type: string
+| | ... | - {rx_src_mac} - MAC address of DUT1-if2. Type: string
+| | ... | - {rx_dst_mac} - MAC address of TG-if2. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send Packet And Check Headers \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
+| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \|
+| | ...
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} |
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac}
+| | ... | ${rx_dst_mac}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac |
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac |
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} |
+| | ... | --tx_if | ${tx_src_port} | --rx_if | ${rx_port}
+| | Run Traffic Script On Node | send_icmp_check_headers.py | ${tg_node} |
+| | ... | ${args}
+
+| Send packet from Port to Port should failed
+| | [Documentation] | Sends packet from ip (with specified mac) to ip
+| | ... | (with dest mac). Using keyword : Send packet And Check
+| | ... | Headers and subsequently checks the return value
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on example:
+| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - {tg_node} : Node to execute scripts on (TG). Type: dictionary
+| | ... | - {src_ip} - IP of source interface (TG-if1). Type: int
+| | ... | - {dst_ip} - IP of destination interface (TG-if2). Type: int
+| | ... | - {tx_src_port} - Interface of TG-if1. Type: string
+| | ... | - {tx_src_mac} - MAC address of TG-if1. Type: string
+| | ... | - {tx_dst_mac} - MAC address of DUT-if1. Type: string
+| | ... | - {rx_port} - Interface of TG-if1. Type: string
+| | ... | - {rx_src_mac} - MAC address of DUT1-if2. Type: string
+| | ... | - {rx_dst_mac} - MAC address of TG-if2. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packet from Port to Port should failed \| ${nodes['TG']} \
+| | ... | \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \
+| | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \
+| | ... | \| 08:00:27:7d:fd:10 \|
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} |
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} |
+| | ... | ${rx_dst_mac}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac |
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac |
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} |
+| | ... | --tx_if | ${tx_src_port} | --rx_if | ${rx_port}
+| | Run Keyword And Expect Error | ICMP echo Rx timeout |
+| | ... | Run Traffic Script On Node | send_icmp_check_headers.py
+| | ... | ${tg_node} | ${args}
+l \ No newline at end of file