aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot')
-rw-r--r--resources/libraries/robot/ip/ip4.robot13
-rw-r--r--resources/libraries/robot/ip/nat.robot127
-rw-r--r--resources/libraries/robot/performance/performance_limits.robot88
-rw-r--r--resources/libraries/robot/performance/performance_utils.robot158
-rw-r--r--resources/libraries/robot/shared/default.robot101
-rw-r--r--resources/libraries/robot/shared/test_teardown.robot11
6 files changed, 313 insertions, 185 deletions
diff --git a/resources/libraries/robot/ip/ip4.robot b/resources/libraries/robot/ip/ip4.robot
index 2dc2a72857..9855e129a4 100644
--- a/resources/libraries/robot/ip/ip4.robot
+++ b/resources/libraries/robot/ip/ip4.robot
@@ -32,13 +32,16 @@
| | ... | Type: string
| | ... | - remote_host2_ip - IP address of remote host2 (Optional).
| | ... | Type: string
+| | ... | - remote_host_mask - Mask of remote host IP addresses (Optional).
+| | ... | Type: string
| |
| | ... | *Example:*
| |
| | ... | \| Initialize IPv4 forwarding in circular topology \
-| | ... | \| 192.168.0.1 \| 192.168.0.2 \|
+| | ... | \| 192.168.0.1 \| 192.168.0.2 \| 24 \|
| |
| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE}
+| | ... | ${remote_host_mask}=32
| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
@@ -81,18 +84,18 @@
| | ... | interface=${DUT2_${int}1}[0]
| |
| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 24
+| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | ${remote_host_mask}
| | ... | gateway=10.10.10.2 | interface=${DUT1_${int}1}[0]
| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
-| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 24
+| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | ${remote_host_mask}
| | ... | gateway=20.20.20.2 | interface=${dut_if2}
| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}'
| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 24
+| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | ${remote_host_mask}
| | ... | gateway=1.1.1.2 | interface=${DUT1_${int}2}[0]
| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}'
| | ... | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 24
+| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | ${remote_host_mask}
| | ... | gateway=1.1.1.1 | interface=${DUT2_${int}1}[0]
| Initialize IPv4 forwarding with scaling in circular topology
diff --git a/resources/libraries/robot/ip/nat.robot b/resources/libraries/robot/ip/nat.robot
index e1c302e98a..8a970cf556 100644
--- a/resources/libraries/robot/ip/nat.robot
+++ b/resources/libraries/robot/ip/nat.robot
@@ -72,86 +72,81 @@
| |
| | Show NAT | ${node}
-| Initialize NAT44 in circular topology
-| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44
-| | ... | between DUTs:
+| Initialize NAT44 deterministic mode in circular topology
+| | [Documentation] | Initialization of NAT44 deterministic mode on DUT1
+| |
+| | Configure inside and outside interfaces
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
+| | Configure deterministic mode for NAT44
+| | ... | ${dut1} | ${in_net} | ${in_mask} | ${out_net} | ${out_mask}
+
+| Initialize NAT44 endpoint-dependent mode in circular topology
+| | [Documentation] | Initialization of NAT44 endpoint-dependent mode on DUT1
+| |
+| | Configure inside and outside interfaces
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
+| | Set NAT44 Address Range
+| | ... | ${dut1} | ${out_net} | ${out_net_end}
+
+# TODO: Remove when 'ip4.Initialize IPv4 forwarding in circular topology' KW
+# adapted to use IP values from variables
+| Initialize IPv4 forwarding for NAT44 in circular topology
+| | [Documentation]
+| | ... | Set IPv4 forwarding for NAT44:
| | ... | - set interfaces up
| | ... | - set IP addresses
| | ... | - set ARP
| | ... | - create routes
-| | ... | - set NAT44 - only on DUT1
| |
-| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
+| | ${status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
+| | ${dut2_status}= | Set Variable If | '${status}' == 'PASS' | ${True}
+| | ... | ${False}
| |
| | Set interfaces in path up
| |
-| | ${tg_if1_ip4}= | Get Variable Value | ${tg_if1_ip4} | 10.0.0.2
-| | ${tg_if1_mask}= | Get Variable Value | ${tg_if1_mask} | 20
-| | ${tg_if2_ip4}= | Get Variable Value | ${tg_if2_ip4} | 12.0.0.2
-| | ${tg_if2_mask}= | Get Variable Value | ${tg_if2_mask} | 20
-| | ${dut1_if1_ip4}= | Get Variable Value | ${dut1_if1_ip4} | 10.0.0.1
-| | ${dut1_if1_mask}= | Get Variable Value | ${dut1_if1_mask} | 20
-| | ${dut1_if2_ip4}= | Get Variable Value | ${dut1_if2_ip4} | 11.0.0.1
-| | ${dut1_if2_mask}= | Get Variable Value | ${dut2_if2_mask} | 20
-| | ${dut2_if1_ip4}= | Get Variable Value | ${dut2_if1_ip4} | 11.0.0.2
-| | ${dut2_if1_mask}= | Get Variable Value | ${dut2_if1_mask} | 20
-| | ${dut2_if2_ip4}= | Get Variable Value | ${dut2_if2_ip4} | 12.0.0.1
-| | ${dut2_if2_mask}= | Get Variable Value | ${dut2_if2_mask} | 20
-| | ${inside_net}= | Get Variable Value | ${inside_net} | 192.168.0.0
-| | ${inside_mask}= | Get Variable Value | ${inside_mask} | 16
-| | ${nat_net}= | Get Variable Value | ${nat_net} | 109.146.163.128
-| | ${nat_mask}= | Get Variable Value | ${nat_mask} | 26
-| | ${dest_net}= | Get Variable Value | ${dest_net} | 20.0.0.0
-| | ${dest_mask}= | Get Variable Value | ${dest_mask} | 24
-| |
-| | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}1}[0]
-| | ... | ${dut1_if1_ip4} | ${dut1_if1_mask}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}2}[0]
-| | ... | ${dut1_if2_ip4} | ${dut1_if2_mask}
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | VPP Interface Set IP Address | ${dut2} | ${DUT2_${int}1}[0]
-| | ... | ${dut2_if1_ip4} | ${dut2_if1_mask}
-| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${dut2}
-| | ... | ELSE | Set Variable | ${dut1}
-| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Set Variable | ${DUT2_${int}2}[0]
-| | ... | ELSE | Set Variable | ${DUT1_${int}2}[0]
-| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | ${dut2_if2_ip4}
-| | ... | ${dut2_if2_mask}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | ${dut1_if1_mask}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | ${dut1_if2_mask}
+| | Run Keyword If | ${dut2_status}
+| | ... | VPP Interface Set IP Address
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_if1_ip4} | ${dut2_if1_mask}
+| | Run Keyword If | ${dut2_status}
+| | ... | VPP Interface Set IP Address
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_if2_ip4} | ${dut2_if2_mask}
| |
| | VPP Add IP Neighbor
| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0]
-| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | Run Keyword If | ${dut2_status}
| | ... | VPP Add IP Neighbor
| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_if1_ip4}
| | ... | ${DUT2_${int}1_mac}[0]
-| | Run Keyword If | '${dut2_status}' == 'PASS'
+| | ... | ELSE | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0]
+| | Run Keyword If | ${dut2_status}
| | ... | VPP Add IP Neighbor
-| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_if2_ip4}
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_if1_ip4}
| | ... | ${DUT1_${int}2_mac}[0]
-| | VPP Add IP Neighbor
-| | ... | ${dut} | ${dut_if2} | ${tg_if2_ip4} | ${TG_pf2_mac}[0]
-| |
-| | Vpp Route Add | ${dut1} | ${inside_net} | ${inside_mask}
-| | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0]
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${dest_net} | ${dest_mask}
-| | ... | gateway=${dut2_if1_ip4} | interface=${DUT1_${int}2}[0]
-| | Run Keyword Unless | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut1} | ${dest_net} | ${dest_mask}
-| | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0]
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${dest_net} | ${dest_mask}
-| | ... | gateway=${tg_if2_ip4} | interface=${DUT2_${int}2}[0]
-| | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Vpp Route Add | ${dut2} | ${nat_net} | ${nat_mask}
-| | ... | gateway=${dut1_if2_ip4} | interface=${DUT2_${int}1}[0]
-| |
-| | Configure inside and outside interfaces
-| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0]
-| | Configure deterministic mode for NAT44
-| | ... | ${dut1} | ${inside_net} | ${inside_mask} | ${nat_net} | ${nat_mask}
-
+| | Run Keyword If | ${dut2_status}
+| | ... | VPP Add IP Neighbor
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${tg_if2_ip4}| ${TG_pf2_mac}[0]
+| |
+| | Vpp Route Add
+| | ... | ${dut1} | ${in_net} | ${in_mask} | gateway=${tg_if1_ip4}
+| | ... | interface=${DUT1_${int}1}[0]
+| | Run Keyword If | ${dut2_status}
+| | ... | Vpp Route Add
+| | ... | ${dut1} | ${dest_net} | ${dest_mask} | gateway=${dut2_if1_ip4}
+| | ... | interface=${DUT1_${int}2}[0]
+| | ... | ELSE | Vpp Route Add
+| | ... | ${dut1} | ${dest_net} | ${dest_mask} | gateway=${tg_if2_ip4}
+| | ... | interface=${DUT1_${int}2}[0]
+| | Run Keyword If | ${dut2_status}
+| | ... | Vpp Route Add
+| | ... | ${dut2} | ${dest_net} | ${dest_mask} | gateway=${tg_if2_ip4}
+| | ... | interface=${DUT2_${int}2}[0]
+| | Run Keyword If | ${dut2_status}
+| | ... | Vpp Route Add
+| | ... | ${dut2} | ${out_net} | ${out_mask} | gateway=${dut1_if2_ip4}
+| | ... | interface=${DUT2_${int}1}[0]
diff --git a/resources/libraries/robot/performance/performance_limits.robot b/resources/libraries/robot/performance/performance_limits.robot
index 82688ac9c6..332ed9368b 100644
--- a/resources/libraries/robot/performance/performance_limits.robot
+++ b/resources/libraries/robot/performance/performance_limits.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -24,19 +24,48 @@
| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize. Type: integer or string
+| | ... | - overhead - Overhead in bytes; default value: ${0}. Type: integer
| |
| | ... | *Returns:*
-| | ... | Average frame size. Type: float
+| | ... | Average frame size including overhead. Type: float
| |
| | ... | *Example:*
| |
| | ... | \| Get Average Frame Size \| IMIX_v4_1 \|
| |
-| | [Arguments] | ${frame_size}
+| | [Arguments] | ${frame_size} | ${overhead}=${0}
| |
-| | Return From Keyword If | '${frame_size}' == 'IMIX_v4_1' | ${353.83333}
-| | ${frame_size} = | Convert To Number | ${frame_size}
-| | Return From Keyword | ${frame_size}
+| | ${frame_size} = | Run Keyword If | '${frame_size}' == 'IMIX_v4_1'
+| | ... | Set Variable | ${353.83333}
+| | ... | ELSE
+| | ... | Convert To Number | ${frame_size}
+| | ${avg_frame_size} = | Evaluate | ${frame_size} + ${overhead}
+| | Return From Keyword | ${avg_frame_size}
+
+| Get Maximum Frame Size
+| | [Documentation]
+| | ... | Framesize can be either integer in case of a single packet
+| | ... | in stream, or set of packets in case of IMIX type or simmilar.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize. Type: integer or string
+| | ... | - overhead - Overhead in bytes; default value: ${0}. Type: integer
+| |
+| | ... | *Returns:*
+| | ... | Maximum frame size including overhead. Type: float
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Get Maximum Frame Size \| IMIX_v4_1 \|
+| |
+| | [Arguments] | ${frame_size} | ${overhead}=${0}
+| |
+| | ${frame_size} = | Run Keyword If | '${frame_size}' == 'IMIX_v4_1'
+| | ... | Set Variable | ${1518}
+| | ... | ELSE
+| | ... | Convert To Number | ${frame_size}
+| | ${max_frame_size} = | Evaluate | ${frame_size} + ${overhead}
+| | Return From Keyword | ${max_frame_size}
| Set Max Rate And Jumbo
| | [Documentation]
@@ -61,8 +90,9 @@
| |
| | ... | *Test (or broader scope) variables read:*
| | ... | - nic_name - Name of bottleneck NIC. Type: string
-| | ... | - overhead - Overhead in bytes. Default: 0. Type: integer
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - overhead - Overhead in bytes; default value: 0. Type: integer
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| |
| | ... | *Test variables set:*
| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
@@ -72,7 +102,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Set test Variable \| \${frame_size} \| IMIX_v4_1 \|
+| | ... | \| Set Test Variable \| \${frame_size} \| IMIX_v4_1 \|
| | ... | \| Set Max Rate And Jumbo \|
| |
| | # Negative overhead is possible, if DUT-DUT traffic is less encapsulated
@@ -84,16 +114,40 @@
| | ... | ${NIC_NAME_TO_PPS_LIMIT} | ${nic_name}
| | ${bps_limit} = | Get From Dictionary
| | ... | ${NIC_NAME_TO_BPS_LIMIT} | ${nic_name}
-| | ${avg_size} = | Get Average Frame Size | ${frame_size}
-| | ${max_size} = | Set Variable If | '${frame_size}' == 'IMIX_v4_1'
-| | ... | ${1518} | ${frame_size}
| | # swo := size_with_overhead
-| | ${avg_swo} = | Evaluate | ${avg_size} + ${overhead}
-| | ${max_swo} = | Evaluate | ${max_size} + ${overhead}
-| | ${jumbo} = | Set Variable If | ${max_swo} < 1522
-| | ... | ${False} | ${True}
+| | ${avg_swo} = | Get Average Frame Size | ${frame_size} | ${overhead}
| | ${rate} = | Evaluate | ${bps_limit} / ((${avg_swo} + 20.0) * 8)
| | ${max_rate} = | Set Variable If | ${rate} > ${pps_limit}
| | ... | ${pps_limit} | ${rate}
-| | Set Test Variable | \${jumbo}
| | Set Test Variable | \${max_rate}
+| | Set Jumbo
+
+| Set Jumbo
+| | [Documentation]
+| | ... | For jumbo frames detection, the maximal packet size is relevant,
+| | ... | encapsulation overhead (if any) has effect.
+| |
+| | ... | This keyword computes jumbo boolean (some suites need that for
+| | ... | configuration decisions).
+| | ... | To streamline suite autogeneration, both input and output values
+| | ... | are communicated as test (or broader scope) variables,
+| | ... | instead of explicit arguments and return values.
+| |
+| | ... | *Test (or broader scope) variables read:*
+| | ... | - overhead - Overhead in bytes; default value: 0. Type: integer
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
+| |
+| | ... | *Test variables set:*
+| | ... | - jumbo - Jumbo boolean, true if jumbo packet support has to be
+| | ... | enabled. Type: boolean
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Set Jumnbo \|
+| |
+| | ${overhead} = | Set Variable If | ${overhead} >= 0 | ${overhead} | ${0}
+| | ${max_swo} = | Get Maximum Frame Size | ${frame_size} | ${overhead}
+| | ${jumbo} = | Set Variable If | ${max_swo} < 1522
+| | ... | ${False} | ${True}
+| | Set Test Variable | \${jumbo}
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index dcabbb9fac..84113709cf 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -50,7 +50,8 @@
| | ... | *Test (or broader scope) variables read:*
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
| | ... | Type: float
| |
@@ -59,12 +60,16 @@
| | ... | - final_relative_width - Maximal width multiple of upper. Type: float
| | ... | - final_trial_duration - Duration of final trials [s]. Type: float
| | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
-| | ... | - intermediate phases - Number of intermediate phases [1]. Type: int
+| | ... | - intermediate phases - Number of intermediate phases [1].
+| | ... | Type: integer
| | ... | - timeout - Fail if search duration is longer [s]. Type: float
-| | ... | - doublings - How many doublings to do when expanding [1]. Type: int
+| | ... | - doublings - How many doublings to do when expanding [1].
+| | ... | Type: integer
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
+| | ... | Type: integer
| | ... | - latency_duration - Duration for latency-specific trials. Type: float
+| | ... | - latency - False to disable latency measurement; default value: True.
+| | ... | Type: boolean
| |
| | ... | *Example:*
| |
@@ -78,6 +83,7 @@
| | ... | ${number_of_intermediate_phases}=${2} | ${timeout}=${720.0}
| | ... | ${doublings}=${2} | ${traffic_directions}=${2}
| | ... | ${latency_duration}=${PERF_TRIAL_LATENCY_DURATION}
+| | ... | ${latency}=${True}
| |
| | # Latency measurements will need more than 9000 pps.
| | ${result} = | Perform optimized ndrpdr search | ${frame_size}
@@ -86,6 +92,7 @@
| | ... | ${final_trial_duration} | ${initial_trial_duration}
| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
| | ... | doublings=${doublings} | traffic_directions=${traffic_directions}
+| | ... | latency=${latency}
| | Display result of NDRPDR search | ${result}
| | Check NDRPDR interval validity | ${result.pdr_interval}
| | ... | ${packet_loss_ratio}
@@ -95,18 +102,22 @@
| | ${ndr_sum}= | Set Variable | ${result.ndr_interval.measured_low.target_tr}
| | ${ndr_per_stream}= | Evaluate | ${ndr_sum} / float(${traffic_directions})
| | ${rate}= | Evaluate | 0.9 * ${pdr_per_stream}
-| | Measure and show latency at specified rate | Latency at 90% PDR:
+| | Run Keyword If | ${latency}
+| | ... | Measure and show latency at specified rate | Latency at 90% PDR:
| | ... | ${latency_duration} | ${rate} | ${framesize}
| | ... | ${traffic_profile} | ${traffic_directions}
| | ${rate}= | Evaluate | 0.5 * ${pdr_per_stream}
-| | Measure and show latency at specified rate | Latency at 50% PDR:
+| | Run Keyword If | ${latency}
+| | ... | Measure and show latency at specified rate | Latency at 50% PDR:
| | ... | ${latency_duration} | ${rate} | ${framesize}
| | ... | ${traffic_profile} | ${traffic_directions}
| | ${rate}= | Evaluate | 0.1 * ${pdr_per_stream}
-| | Measure and show latency at specified rate | Latency at 10% PDR:
+| | Run Keyword If | ${latency}
+| | ... | Measure and show latency at specified rate | Latency at 10% PDR:
| | ... | ${latency_duration} | ${rate} | ${framesize}
| | ... | ${traffic_profile} | ${traffic_directions}
-| | Measure and show latency at specified rate | Latency at 0% PDR:
+| | Run Keyword If | ${latency}
+| | ... | Measure and show latency at specified rate | Latency at 0% PDR:
| | ... | ${latency_duration} | ${0} | ${framesize}
| | ... | ${traffic_profile} | ${traffic_directions}
| | # Finally, trials with runtime and other stats.
@@ -128,7 +139,8 @@
| | ... | *Test (or broader scope) variables read:*
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
| | ... | Type: float
| |
@@ -137,11 +149,15 @@
| | ... | - final_relative_width - Maximal width multiple of upper. Type: float
| | ... | - final_trial_duration - Duration of final trials [s]. Type: float
| | ... | - initial_trial_duration - Duration of initial trials [s]. Type: float
-| | ... | - intermediate phases - Number of intermediate phases [1]. Type: int
+| | ... | - intermediate phases - Number of intermediate phases [1].
+| | ... | Type: integer
| | ... | - timeout - Fail if search duration is longer [s]. Type: float
-| | ... | - doublings - How many doublings to do when expanding [1]. Type: int
+| | ... | - doublings - How many doublings to do when expanding [1].
+| | ... | Type: integer
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
+| | ... | Type: integer
+| | ... | - latency - True to enable latency measurement; default value: False.
+| | ... | Type: boolean
| |
| | ... | *Returns:*
| | ... | - Lower bound for bi-directional throughput at given PLR. Type: float
@@ -156,7 +172,7 @@
| | ... | ${final_relative_width}=${0.001} | ${final_trial_duration}=${10.0}
| | ... | ${initial_trial_duration}=${1.0}
| | ... | ${number_of_intermediate_phases}=${1} | ${timeout}=${720.0}
-| | ... | ${doublings}=${2} | ${traffic_directions}=${2}
+| | ... | ${doublings}=${2} | ${traffic_directions}=${2} | ${latency}=${False}
| |
| | ${result} = | Perform optimized ndrpdr search | ${frame_size}
| | ... | ${traffic_profile} | ${10000} | ${max_rate}
@@ -164,6 +180,7 @@
| | ... | ${final_trial_duration} | ${initial_trial_duration}
| | ... | ${number_of_intermediate_phases} | timeout=${timeout}
| | ... | doublings=${doublings} | traffic_directions=${traffic_directions}
+| | ... | latency=${latency}
| | Check NDRPDR interval validity | ${result.pdr_interval}
| | ... | ${packet_loss_ratio}
| | Return From Keyword | ${result.pdr_interval.measured_low.target_tr}
@@ -181,7 +198,8 @@
| | ... | *Test (or broader scope) variables read:*
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
| | ... | Type: float
| |
@@ -189,7 +207,9 @@
| | ... | - packet_loss_ratio - Accepted loss during search. Type: float
| | ... | - timeout - Stop when search duration is longer [s]. Type: float
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
+| | ... | Type: integer
+| | ... | - latency - True to enable latency measurement; default value: False.
+| | ... | Type: boolean
| |
| | ... | *Example:*
| |
@@ -197,13 +217,13 @@
| | ... | \| \${2} \|
| |
| | [Arguments] | ${packet_loss_ratio}=${1e-7} | ${timeout}=${1800.0}
-| | ... | ${traffic_directions}=${2}
+| | ... | ${traffic_directions}=${2} | ${latency}=${False}
| |
| | ${min_rate} = | Set Variable | ${10000}
| | ${average} | ${stdev} = | Perform soak search | ${frame_size}
| | ... | ${traffic_profile} | ${min_rate} | ${max_rate}
| | ... | ${packet_loss_ratio} | timeout=${timeout}
-| | ... | traffic_directions=${traffic_directions}
+| | ... | traffic_directions=${traffic_directions} | latency=${latency}
| | ${lower} | ${upper} = | Display result of soak search
| | ... | ${average} | ${stdev}
| | Should Not Be True | 1.1 * ${traffic_directions} * ${min_rate} > ${lower}
@@ -229,7 +249,7 @@
| | ... | *Example:*
| |
| | ... | \| Display single bound \| NDR lower bound \| \${12345.67} \
-| | ... | \| \${64} \| show_latency=\${EMPTY} \|
+| | ... | \| \${64} \| latency=\${EMPTY} \|
| |
| | [Arguments] | ${text} | ${rate_total} | ${frame_size} | ${latency}=${EMPTY}
| |
@@ -271,7 +291,8 @@
| | ... | The given result should contain latency data as well.
| |
| | ... | *Test (or broader scope) variables read:*
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | *Arguments:*
| | ... | - result - Measured result data per stream [pps]. Type: NdrPdrResult
| |
@@ -304,7 +325,8 @@
| | ... | (Throughput * (L2 Frame Size + IPG) * 8)
| |
| | ... | *Test (or broader scope) variables read:*
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | *Arguments:*
| | ... | - avg - Estimated average critical load [pps]. Type: float
| | ... | - stdev - Standard deviation of critical load [pps]. Type: float
@@ -360,36 +382,36 @@
| | ... | Send traffic at maximum rate.
| |
| | ... | *Test (or broader scope) variables read:*
-| | ... | - traffic_profile - Name of module defining traffc for measurements.
+| | ... | - traffic_profile - Name of module defining traffic for measurements.
| | ... | Type: string
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
| | ... | Type: float
| |
| | ... | *Arguments:*
-| | ... | - trial_duration - Duration of single trial [s].
-| | ... | Type: float
-| | ... | - fail_no_traffic - Whether to fail on zero receive count.
-| | ... | Type: boolean
+| | ... | - trial_duration - Duration of single trial [s]. Type: float
+| | ... | - fail_no_traffic - Whether to fail on zero receive count;
+| | ... | default value: True. Type: boolean
| | ... | - trial_multiplicity - How many trials in this measurement.
-| | ... | Type: int
-| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
-| | ... | - tx_port - TX port of TG, default 0.
-| | ... | Type: integer
-| | ... | - rx_port - RX port of TG, default 1.
| | ... | Type: integer
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic;
+| | ... | default value: 2. Type: integer
+| | ... | - tx_port - TX port of TG; default value: 0. Type: integer
+| | ... | - rx_port - RX port of TG; default value: 1. Type: integer
+| | ... | - latency - True to enable latency measurement; default value: False.
+| | ... | Type: boolean
| |
| | ... | *Example:*
| |
-| | ... | \| Traffic should pass with maximum rate \| \${1} \| \${10.0} \
-| | ... | \| \${False} \| \${2} \| \${0} \| \${1} \|
+| | ... | \| Traffic should pass with maximum rate \| \${1} \| \${False} \
+| | ... | \| \${10.0} \| \${2} \| \${0} \| \${1} \| \${True} \|
| |
| | [Arguments] | ${trial_duration}=${trial_duration}
| | ... | ${fail_no_traffic}=${True}
| | ... | ${trial_multiplicity}=${trial_multiplicity}
| | ... | ${traffic_directions}=${2} | ${tx_port}=${0} | ${rx_port}=${1}
-| | ... | ${latency}=${True}
+| | ... | ${latency}=${False}
| |
| | ${results}= | Send traffic at specified rate
| | ... | ${trial_duration} | ${max_rate} | ${frame_size}
@@ -411,35 +433,39 @@
| | ... | - trial_duration - Duration of single trial [s]. Type: float
| | ... | - rate - Target aggregate transmit rate [pps] / Connections per second
| | ... | (CPS) for UDP/TCP flows. Type: float
-| | ... | - frame_size - L2 Frame Size [B]. Type: integer/string
+| | ... | - frame_size - L2 Frame Size [B]. Type: integer or string
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
| | ... | - trial_multiplicity - How many trials in this measurement.
-| | ... | Type: int
-| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
-| | ... | - tx_port - TX port of TG, default 0.
| | ... | Type: integer
-| | ... | - rx_port - RX port of TG, default 1.
+| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
| | ... | Type: integer
-| | ... | - extended_debug- True to enable extended debug.
+| | ... | - tx_port - TX port of TG; default value: 0. Type: integer
+| | ... | - rx_port - RX port of TG; default value: 1. Type: integer
+| | ... | - extended_debug - True to enable extended debug.
+| | ... | Type: boolean
+| | ... | - latency - True to enable latency measurement; default value: False.
| | ... | Type: boolean
| |
| | ... | *Example:*
| |
| | ... | \| Send traffic at specified rate \| \${1.0} \| ${4000000.0} \
| | ... | \| \${64} \| 3-node-IPv4 \| \${10} \| \${2} \| \${0} \| \${1} \
-| | ... | \${False} \|
+| | ... | \| ${False} \| ${True} \|
| |
| | [Arguments] | ${trial_duration} | ${rate} | ${frame_size}
| | ... | ${traffic_profile} | ${trial_multiplicity}=${trial_multiplicity}
| | ... | ${traffic_directions}=${2} | ${tx_port}=${0} | ${rx_port}=${1}
-| | ... | ${extended_debug}=${extended_debug} | ${latency}=${True}
+| | ... | ${extended_debug}=${extended_debug} | ${latency}=${False}
| |
| | Set Test Variable | ${extended_debug}
-| | Clear and show runtime counters with running traffic | ${trial_duration}
-| | ... | ${rate} | ${frame_size} | ${traffic_profile}
-| | ... | ${traffic_directions} | ${tx_port} | ${rx_port}
+| | # Following setting of test variables is needed as
+| | # "Clear and show runtime counters with running traffic" has been moved to
+| | # pre_stats actions.
+| | Set Test Variable | ${rate}
+| | Set Test Variable | ${traffic_directions}
+| | Set Test Variable | ${tx_port}
+| | Set Test Variable | ${rx_port}
| | FOR | ${action} | IN | @{pre_stats}
| | | Run Keyword | Additional Statistics Action For ${action}
| | END
@@ -473,15 +499,15 @@
| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
| | ... | Type: float
-| | ... | - frame_size - L2 Frame Size [B]. Type: integer/string
+| | ... | - frame_size - L2 Frame Size [B]. Type: integer or string
| | ... | - traffic_profile - Name of module defining traffic for measurements.
| | ... | Type: string
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
-| | ... | - tx_port - TX port of TG, default 0. Type: integer
-| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| | ... | Type: integer
+| | ... | - tx_port - TX port of TG; default value: 0. Type: integer
+| | ... | - rx_port - RX port of TG; default value: 1. Type: integer
| | ... | - safe_rate - To apply if rate is below this, as latency pps is fixed.
-| | ... | In pps, type int.
+| | ... | In pps. Type: integer.
| |
| | ... | *Example:*
| |
@@ -514,13 +540,13 @@
| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
| | ... | Type: float
-| | ... | - frame_size - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
+| | ... | - frame_size - L2 Frame Size [B] or IMIX_v4_1. Type: integer or string
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
-| | ... | - tx_port - TX port of TG, default 0. Type: integer
-| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| | ... | Type: integer
+| | ... | - tx_port - TX port of TG; default value: 0. Type: integer
+| | ... | - rx_port - RX port of TG, default value: 1. Type: integer
| |
| | ... | *Example:*
| |
@@ -553,15 +579,16 @@
| | ... | *Test (or broader scope) variables read:*
| | ... | - traffic_profile - Name of module defining traffc for measurements.
| | ... | Type: string
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: int or str
+| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
+| | ... | string
| | ... | *Arguments:*
| | ... | - rate - Rate [pps] for sending packets in case of T-Rex stateless
| | ... | mode or multiplier of profile CPS in case of T-Rex astf mode.
| | ... | Type: float
| | ... | - traffic_directions - Bi- (2) or uni- (1) directional traffic.
-| | ... | Type: int
-| | ... | - tx_port - TX port of TG, default 0. Type: integer
-| | ... | - rx_port - RX port of TG, default 1. Type: integer
+| | ... | Type: integer
+| | ... | - tx_port - TX port of TG; default value: 0. Type: integer
+| | ... | - rx_port - RX port of TG; default value: 1. Type: integer
| |
| | ... | *Example:*
| |
@@ -647,4 +674,13 @@
| | ... | Additional Statistics Action for bash command "perf stat".
| |
| | Run Keyword If | ${extended_debug}==${True}
-| | ... | Perf Stat On All DUTs | ${nodes} \ No newline at end of file
+| | ... | Perf Stat On All DUTs | ${nodes}
+
+| Additional Statistics Action For vpp-clear-show-runtime-with-traffic
+| | [Documentation]
+| | ... | Additional Statistics Action for clear and show runtime counters with
+| | ... | running traffic.
+| |
+| | Clear and show runtime counters with running traffic
+| | ... | ${trial_duration} | ${rate} | ${frame_size} | ${traffic_profile}
+| | ... | ${traffic_directions} | ${tx_port} | ${rx_port}
diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot
index 6e1e5416e2..51ce513078 100644
--- a/resources/libraries/robot/shared/default.robot
+++ b/resources/libraries/robot/shared/default.robot
@@ -77,10 +77,10 @@
| | ... | try to initialize/disable.
| |
| | ... | *Arguments:*
-| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx.
-| | ... | Type: string, default value: HW_DH895xcc
-| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs
-| | ... | Type: integer, default value: ${32}
+| | ... | - crypto_type - Crypto device type - HW_DH895xcc or HW_C3xxx; default
+| | ... | value: HW_DH895xcc. Type: string
+| | ... | - numvfs - Number of VFs to initialize, 0 - disable the VFs; default
+| | ... | value: ${32} Type: integer
| | ... | - force_init - Force to initialize. Type: boolean
| |
| | ... | *Example:*
@@ -127,7 +127,7 @@
| | [Arguments] | ${dutx} | ${dut_keys}
| |
| | FOR | ${key} | IN | @{dut_keys}
-| | | ${found_key} | ${value}= | Run Keyword and Ignore Error
+| | | ${found_key} | ${value}= | Run Keyword And Ignore Error
| | | ... | Dictionaries Should Be Equal | ${nodes['${key}']} | ${dutx}
| | | Run Keyword If | '${found_key}' == 'PASS' | EXIT FOR LOOP
| | END
@@ -142,21 +142,21 @@
| | FOR | ${dut} | IN | @{duts}
| | | Import Library | resources.libraries.python.VppConfigGenerator
| | | ... | WITH NAME | ${dut}
-| | | Run keyword | ${dut}.Set Node | ${nodes['${dut}']} | node_key=${dut}
-| | | Run keyword | ${dut}.Add Unix Log
-| | | Run keyword | ${dut}.Add Unix CLI Listen
-| | | Run keyword | ${dut}.Add Unix Nodaemon
-| | | Run keyword | ${dut}.Add Unix Coredump
-| | | Run keyword | ${dut}.Add Socksvr | ${SOCKSVR_PATH}
-| | | Run keyword | ${dut}.Add Heapsize | 4G
-| | | Run keyword | ${dut}.Add Statseg size | 4G
-| | | Run keyword | ${dut}.Add Statseg Per Node Counters | on
-| | | Run keyword | ${dut}.Add Plugin | disable | default
-| | | Run keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
-| | | Run keyword | ${dut}.Add IP6 Hash Buckets | 2000000
-| | | Run keyword | ${dut}.Add IP6 Heap Size | 4G
-| | | Run keyword | ${dut}.Add IP Heap Size | 4G
-| | | Run keyword | ${dut}.Add Graph Node Variant | ${GRAPH_NODE_VARIANT}
+| | | Run Keyword | ${dut}.Set Node | ${nodes['${dut}']} | node_key=${dut}
+| | | Run Keyword | ${dut}.Add Unix Log
+| | | Run Keyword | ${dut}.Add Unix CLI Listen
+| | | Run Keyword | ${dut}.Add Unix Nodaemon
+| | | Run Keyword | ${dut}.Add Unix Coredump
+| | | Run Keyword | ${dut}.Add Socksvr | ${SOCKSVR_PATH}
+| | | Run Keyword | ${dut}.Add Heapsize | 4G
+| | | Run Keyword | ${dut}.Add Statseg size | 4G
+| | | Run Keyword | ${dut}.Add Statseg Per Node Counters | on
+| | | Run Keyword | ${dut}.Add Plugin | disable | default
+| | | Run Keyword | ${dut}.Add Plugin | enable | @{plugins_to_enable}
+| | | Run Keyword | ${dut}.Add IP6 Hash Buckets | 2000000
+| | | Run Keyword | ${dut}.Add IP6 Heap Size | 4G
+| | | Run Keyword | ${dut}.Add IP Heap Size | 4G
+| | | Run Keyword | ${dut}.Add Graph Node Variant | ${GRAPH_NODE_VARIANT}
| | END
| Add worker threads to all DUTs
@@ -194,26 +194,26 @@
| | | ${cpu_main}= | Cpu list per node str | ${nodes['${dut}']} | ${numa}
| | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${CPU_CNT_MAIN}
| | | ${skip_cnt}= | Evaluate | ${CPU_CNT_SYSTEM} + ${CPU_CNT_MAIN}
-| | | ${cpu_wt}= | Run keyword if | ${cpu_count_int} > 0 |
+| | | ${cpu_wt}= | Run Keyword If | ${cpu_count_int} > 0 |
| | | ... | Cpu list per node str | ${nodes['${dut}']} | ${numa}
| | | ... | skip_cnt=${skip_cnt} | cpu_cnt=${cpu_count_int}
| | | ... | smt_used=${smt_used}
-| | | ${thr_count_int}= | Run keyword if | ${smt_used}
+| | | ${thr_count_int}= | Run Keyword If | ${smt_used}
| | | ... | Evaluate | int(${cpu_count_int}*2)
| | | ... | ELSE | Set variable | ${thr_count_int}
-| | | ${rxq_count_int}= | Run keyword if | ${rx_queues}
+| | | ${rxq_count_int}= | Run Keyword If | ${rx_queues}
| | | ... | Set variable | ${rx_queues}
| | | ... | ELSE | Evaluate | int(${thr_count_int}/2)
-| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
+| | | ${rxq_count_int}= | Run Keyword If | ${rxq_count_int} == 0
| | | ... | Set variable | ${1}
| | | ... | ELSE | Set variable | ${rxq_count_int}
| | | Run Keyword | ${dut}.Add CPU Main Core | ${cpu_main}
-| | | Run keyword if | ${cpu_count_int} > 0
+| | | Run Keyword If | ${cpu_count_int} > 0
| | | ... | ${dut}.Add CPU Corelist Workers | ${cpu_wt}
-| | | Run keyword if | ${smt_used}
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${215040} | ELSE
-| | | ... | Run keyword | ${dut}.Add Buffers Per Numa | ${107520}
-| | | Run keyword if | ${thr_count_int} > 1
+| | | Run Keyword If | ${smt_used}
+| | | ... | Run Keyword | ${dut}.Add Buffers Per Numa | ${215040} | ELSE
+| | | ... | Run Keyword | ${dut}.Add Buffers Per Numa | ${107520}
+| | | Run Keyword If | ${thr_count_int} > 1
| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
| | END
@@ -245,15 +245,44 @@
| Add NAT to all DUTs
| | [Documentation] | Add NAT configuration to all DUTs.
| |
+| | ... | *Arguments:*
+| | ... | - nat_mode - NAT mode; default value: deterministic. Type: string
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Add NAT to all DUTs \| nat_mode=endpoint-dependent \|
+| |
+| | [Arguments] | ${nat_mode}=deterministic
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Run Keyword | ${dut}.Add NAT | value=${nat_mode}
+| | END
+
+| Add NAT max translations per thread to all DUTs
+| | [Documentation] | Add NAT maximum number of translations per thread
+| | ... | configuration.
+| |
+| | ... | *Arguments:*
+| | ... | - max_translations_per_thread - NAT maximum number of translations per
+| | ... | thread. Type: string
+| |
+| | ... | *Example:*
+| |
+| | ... | \| Add NAT translation memory to all DUTs \
+| | ... | \| max_translations_per_thread=2048 \|
+| |
+| | [Arguments] | ${max_translations_per_thread}=1024
+| |
| | FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Add NAT
+| | | Run Keyword | ${dut}.Add NAT max translations per thread
+| | | ... | value=${max_translations_per_thread}
| | END
| Write startup configuration on all VPP DUTs
| | [Documentation] | Write VPP startup configuration without restarting VPP.
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Write Config
+| | | Run Keyword | ${dut}.Write Config
| | END
| Apply startup configuration on all VPP DUTs
@@ -270,12 +299,12 @@
| | [Arguments] | ${with_trace}=${False}
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Run keyword | ${dut}.Apply Config
+| | | Run Keyword | ${dut}.Apply Config
| | END
| | Save VPP PIDs
| | Enable Coredump Limit VPP on All DUTs | ${nodes}
| | Update All Interface Data On All Nodes | ${nodes} | skip_tg=${True}
-| | Run keyword If | ${with_trace} | VPP Enable Traces On All Duts | ${nodes}
+| | Run Keyword If | ${with_trace} | VPP Enable Traces On All Duts | ${nodes}
| Apply startup configuration on VPP DUT
| | [Documentation] | Write VPP startup configuration and restart VPP DUT.
@@ -286,13 +315,13 @@
| |
| | [Arguments] | ${dut} | ${with_trace}=${False}
| |
-| | Run keyword | ${dut}.Apply Config
+| | Run Keyword | ${dut}.Apply Config
| | Save VPP PIDs on DUT | ${dut}
| | Enable Coredump Limit VPP on DUT | ${nodes['${dut}']}
| | ${dutnode}= | Copy Dictionary | ${nodes}
| | Keep In Dictionary | ${dutnode} | ${dut}
| | Update All Interface Data On All Nodes | ${dutnode} | skip_tg=${True}
-| | Run keyword If | ${with_trace} | VPP Enable Traces On Dut
+| | Run Keyword If | ${with_trace} | VPP Enable Traces On Dut
| | ... | ${nodes['${dut}']}
| Save VPP PIDs
@@ -335,7 +364,7 @@
| | ${err_msg}= | Catenate | ${SUITE NAME} - ${TEST NAME}
| | ... | \nThe VPP PIDs are not equal!\nTest Setup VPP PIDs:
| | ... | ${setup_vpp_pids}\nTest Teardown VPP PIDs: ${teardown_vpp_pids}
-| | ${rc} | ${msg}= | Run keyword and ignore error
+| | ${rc} | ${msg}= | Run Keyword And Ignore Error
| | ... | Dictionaries Should Be Equal
| | ... | ${setup_vpp_pids} | ${teardown_vpp_pids}
| | Run Keyword And Return If | '${rc}'=='FAIL' | Log | ${err_msg}
diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot
index b5cdab0664..5d71db4edc 100644
--- a/resources/libraries/robot/shared/test_teardown.robot
+++ b/resources/libraries/robot/shared/test_teardown.robot
@@ -110,6 +110,17 @@
| | | ... | Show NAT verbose | ${nodes['${dut}']}
| | END
+| Additional Test Tear Down Action For nat-ed
+| | [Documentation]
+| | ... | Additional teardown for tests which uses NAT feature.
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Show NAT Config | ${nodes['${dut}']}
+| | | Show NAT44 Summary | ${nodes['${dut}']}
+| | | Show NAT Base Data | ${nodes['${dut}']}
+| | | Vpp Get Ip Table Summary | ${nodes['${dut}']}
+| | END
+
| Additional Test Tear Down Action For namespace
| | [Documentation]
| | ... | Additional teardown for tests which uses namespace.