diff options
Diffstat (limited to 'resources/libraries')
| -rw-r--r-- | resources/libraries/bash/function/dpdk.sh | 6 | ||||
| -rw-r--r-- | resources/libraries/python/DPDK/L3fwdCheck.py | 36 | ||||
| -rw-r--r-- | resources/libraries/python/DPDK/L3fwdTest.py | 90 | ||||
| -rw-r--r-- | resources/libraries/python/DPDK/TestpmdCheck.py | 35 | ||||
| -rw-r--r-- | resources/libraries/python/DPDK/TestpmdTest.py | 101 | ||||
| -rw-r--r-- | resources/libraries/robot/dpdk/default.robot | 93 |
6 files changed, 185 insertions, 176 deletions
diff --git a/resources/libraries/bash/function/dpdk.sh b/resources/libraries/bash/function/dpdk.sh index bf1e8e337e..f013683659 100644 --- a/resources/libraries/bash/function/dpdk.sh +++ b/resources/libraries/bash/function/dpdk.sh @@ -264,8 +264,7 @@ function dpdk_l3fwd_check () { for attempt in {1..60}; do echo "Checking if l3fwd state is ok, attempt nr ${attempt}" - if fgrep "Port 0 Link up" screenlog.0 && \ - fgrep "Port 1 Link up" screenlog.0; then + if fgrep "Link up" screenlog.0; then cat screenlog.0 dpdk_l3fwd_pid exit 0 @@ -353,8 +352,7 @@ function dpdk_testpmd_check () { for attempt in {1..60}; do echo "Checking if testpmd links state changed, attempt nr ${attempt}" - if fgrep "Port 0: link state change event" screenlog.0 && \ - fgrep "Port 1: link state change event" screenlog.0; then + if fgrep "link state change event" screenlog.0; then cat screenlog.0 exit 0 fi diff --git a/resources/libraries/python/DPDK/L3fwdCheck.py b/resources/libraries/python/DPDK/L3fwdCheck.py deleted file mode 100644 index a2f3ce655e..0000000000 --- a/resources/libraries/python/DPDK/L3fwdCheck.py +++ /dev/null @@ -1,36 +0,0 @@ -# Copyright (c) 2022 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -from resources.libraries.python.Constants import Constants -from resources.libraries.python.DpdkUtil import DpdkUtil -from resources.libraries.python.ssh import exec_cmd_no_error, exec_cmd -from resources.libraries.python.topology import NodeType, Topology - - -class L3fwdCheck: - """Test the DPDK l3fwd is ready.""" - - @staticmethod - def check_l3fwd(node): - """ - Execute the l3fwd check on the DUT node. - - :param node: DUT node. - :type node: dict - :raises RuntimeError: If the script "check_l3fwd.sh" fails. - """ - if node[u"type"] == NodeType.DUT: - command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\ - f"/entry/check_l3fwd.sh" - message = f"Failed to check l3fwd state at node {node['host']}" - exec_cmd_no_error(node, command, timeout=1800, message=message) diff --git a/resources/libraries/python/DPDK/L3fwdTest.py b/resources/libraries/python/DPDK/L3fwdTest.py index 1c6e618c01..2ceeab2a51 100644 --- a/resources/libraries/python/DPDK/L3fwdTest.py +++ b/resources/libraries/python/DPDK/L3fwdTest.py @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2022 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -12,19 +12,87 @@ # limitations under the License. """ -This module exists to provide the l3fwd test for DPDK on topology nodes. +This module exists to start l3fwd on topology nodes. """ +from robot.libraries.BuiltIn import BuiltIn from resources.libraries.python.Constants import Constants +from resources.libraries.python.CpuUtils import CpuUtils from resources.libraries.python.DpdkUtil import DpdkUtil from resources.libraries.python.ssh import exec_cmd_no_error, exec_cmd from resources.libraries.python.topology import NodeType, Topology - NB_PORTS = 2 + class L3fwdTest: - """Test the DPDK l3fwd performance.""" + """This class start l3fwd on topology nodes and check if properly started. + """ + + @staticmethod + def start_l3fwd_on_all_duts( + nodes, topology_info, phy_cores, rx_queues=None, jumbo_frames=False, + rxd=None, txd=None): + """ + Execute the l3fwd on all dut nodes. + + :param nodes: All the nodes info from the topology file. + :param topology_info: All the info from the topology file. + :param phy_cores: Number of physical cores to use. + :param rx_queues: Number of RX queues. + :param jumbo_frames: Jumbo frames on/off. + :param rxd: Number of RX descriptors. + :param txd: Number of TX descriptors. + + :type nodes: dict + :type topology_info: dict + :type phy_cores: int + :type rx_queues: int + :type jumbo_frames: bool + :type rxd: int + :type txd: int + :raises RuntimeError: If bash return code is not 0. + """ + cpu_count_int = dp_count_int = int(phy_cores) + dp_cores = cpu_count_int+1 + for node in nodes: + if u"DUT" in node: + compute_resource_info = CpuUtils.get_affinity_vswitch( + nodes, node, phy_cores, rx_queues=rx_queues, + rxd=rxd, txd=txd + ) + if dp_count_int > 1: + BuiltIn().set_tags('MTHREAD') + else: + BuiltIn().set_tags('STHREAD') + BuiltIn().set_tags( + f"{dp_count_int}T{cpu_count_int}C" + ) + + cpu_dp = compute_resource_info[u"cpu_dp"] + rxq_count_int = compute_resource_info[u"rxq_count_int"] + if1 = topology_info[f"{node}_pf1"][0] + if2 = topology_info[f"{node}_pf2"][0] + L3fwdTest.start_l3fwd( + nodes, nodes[node], if1=if1, if2=if2, lcores_list=cpu_dp, + nb_cores=dp_count_int, queue_nums=rxq_count_int, + jumbo_frames=jumbo_frames + ) + for node in nodes: + if u"DUT" in node: + for i in range(3): + try: + L3fwdTest.check_l3fwd(nodes[node]) + break + except RuntimeError: + L3fwdTest.start_l3fwd( + nodes, nodes[node], if1=if1, if2=if2, + lcores_list=cpu_dp, nb_cores=dp_count_int, + queue_nums=rxq_count_int, jumbo_frames=jumbo_frames + ) + else: + message = f"Failed to start l3fwd at node {node}" + raise RuntimeError(message) @staticmethod def start_l3fwd( @@ -100,6 +168,20 @@ class L3fwdTest: message = f"Failed to execute l3fwd test at node {node['host']}" exec_cmd_no_error(node, command, timeout=1800, message=message) + @staticmethod + def check_l3fwd(node): + """ + Execute the l3fwd check on the DUT node. + + :param node: DUT node. + :type node: dict + :raises RuntimeError: If the script "check_l3fwd.sh" fails. + """ + if node[u"type"] == NodeType.DUT: + command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\ + f"/entry/check_l3fwd.sh" + message = "L3fwd not started properly" + exec_cmd_no_error(node, command, timeout=1800, message=message) @staticmethod def get_adj_mac(nodes, node, if1, if2): diff --git a/resources/libraries/python/DPDK/TestpmdCheck.py b/resources/libraries/python/DPDK/TestpmdCheck.py deleted file mode 100644 index fb6f4dc791..0000000000 --- a/resources/libraries/python/DPDK/TestpmdCheck.py +++ /dev/null @@ -1,35 +0,0 @@ -# Copyright (c) 2022 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -from resources.libraries.python.Constants import Constants -from resources.libraries.python.ssh import exec_cmd_no_error -from resources.libraries.python.topology import NodeType - - -class TestpmdCheck: - """Test the DPDK testpmd is ready.""" - - @staticmethod - def check_testpmd(node): - """ - Execute the testpmd check on the DUT node. - - :param node: DUT node. - :type node: dict - :raises RuntimeError: If the script "check_testpmd.sh" fails. - """ - if node[u"type"] == NodeType.DUT: - command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\ - f"/entry/check_testpmd.sh" - message = f"Failed to check testpmd state at node {node['host']}" - exec_cmd_no_error(node, command, timeout=1800, message=message) diff --git a/resources/libraries/python/DPDK/TestpmdTest.py b/resources/libraries/python/DPDK/TestpmdTest.py index f88b368e93..091110f129 100644 --- a/resources/libraries/python/DPDK/TestpmdTest.py +++ b/resources/libraries/python/DPDK/TestpmdTest.py @@ -11,18 +11,96 @@ # See the License for the specific language governing permissions and # limitations under the License. -"""This module implements functionality which sets L2 forwarding for DPDK on -DUT nodes. +""" +This module exists to start testpmd on topology nodes. """ +from robot.libraries.BuiltIn import BuiltIn from resources.libraries.python.Constants import Constants +from resources.libraries.python.CpuUtils import CpuUtils from resources.libraries.python.DpdkUtil import DpdkUtil from resources.libraries.python.ssh import exec_cmd_no_error from resources.libraries.python.topology import NodeType, Topology class TestpmdTest: - """Setup the DPDK for testpmd performance test.""" + """ + This class start testpmd on topology nodes and check if properly started. + """ + + @staticmethod + def start_testpmd_on_all_duts( + nodes, topology_info, phy_cores, rx_queues=None, jumbo_frames=False, + rxd=None, txd=None, nic_rxq_size=None, nic_txq_size=None): + """ + Start the testpmd with M worker threads and rxqueues N and jumbo + support frames on/off on all DUTs. + + :param nodes: All the nodes info from the topology file. + :param topology_info: All the info from the topology file. + :param phy_cores: Number of physical cores to use. + :param rx_queues: Number of RX queues. + :param jumbo_frames: Jumbo frames on/off. + :param rxd: Number of RX descriptors. + :param txd: Number of TX descriptors. + :param nic_rxq_size: RX queue size. + :param nic_txq_size: TX queue size. + + :type nodes: dict + :type topology_info: dict + :type phy_cores: int + :type rx_queues: int + :type jumbo_frames: bool + :type rxd: int + :type txd: int + :type nic_rxq_size: int + :type nic_txq_size: int + :raises RuntimeError: If bash return code is not 0. + """ + + cpu_count_int = dp_count_int = int(phy_cores) + dp_cores = cpu_count_int+1 + for node in nodes: + if u"DUT" in node: + compute_resource_info = CpuUtils.get_affinity_vswitch( + nodes, node, phy_cores, rx_queues=rx_queues, + rxd=rxd, txd=txd + ) + if dp_count_int > 1: + BuiltIn().set_tags('MTHREAD') + else: + BuiltIn().set_tags('STHREAD') + BuiltIn().set_tags( + f"{dp_count_int}T{cpu_count_int}C" + ) + + cpu_dp = compute_resource_info[u"cpu_dp"] + rxq_count_int = compute_resource_info[u"rxq_count_int"] + if1 = topology_info[f"{node}_pf1"][0] + if2 = topology_info[f"{node}_pf2"][0] + TestpmdTest.start_testpmd( + nodes[node], if1=if1, if2=if2, lcores_list=cpu_dp, + nb_cores=dp_count_int, queue_nums=rxq_count_int, + jumbo_frames=jumbo_frames, rxq_size=nic_rxq_size, + txq_size=nic_txq_size + ) + for node in nodes: + if u"DUT" in node: + for i in range(3): + try: + TestpmdTest.check_testpmd(nodes[node]) + break + except RuntimeError: + TestpmdTest.start_testpmd( + nodes[node], if1=if1, if2=if2, + lcores_list=cpu_dp, nb_cores=dp_count_int, + queue_nums=rxq_count_int, + jumbo_frames=jumbo_frames, + rxq_size=nic_rxq_size, txq_size=nic_txq_size + ) + else: + message = f"Failed to start testpmd at node {node}" + raise RuntimeError(message) @staticmethod def start_testpmd( @@ -45,7 +123,7 @@ class TestpmdTest: :type if1: str :type if2: str :type lcores_list: str - :type nb_cores: str + :type nb_cores: int :type queue_nums: str :type jumbo_frames: bool :type rxq_size: int @@ -83,3 +161,18 @@ class TestpmdTest: f"/entry/run_testpmd.sh \"{testpmd_args}\"" message = f"Failed to execute testpmd at node {node['host']}" exec_cmd_no_error(node, command, timeout=1800, message=message) + + @staticmethod + def check_testpmd(node): + """ + Execute the testpmd check on the DUT node. + + :param node: DUT node. + :type node: dict + :raises RuntimeError: If the script "check_testpmd.sh" fails. + """ + if node[u"type"] == NodeType.DUT: + command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\ + f"/entry/check_testpmd.sh" + message = "Testpmd not started properly" + exec_cmd_no_error(node, command, timeout=1800, message=message) diff --git a/resources/libraries/robot/dpdk/default.robot b/resources/libraries/robot/dpdk/default.robot deleted file mode 100644 index b63f245d07..0000000000 --- a/resources/libraries/robot/dpdk/default.robot +++ /dev/null @@ -1,93 +0,0 @@ -# Copyright (c) 2022 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.CpuUtils -| Library | resources.libraries.python.DPDK.TestpmdTest -| Library | resources.libraries.python.DPDK.TestpmdCheck -| Library | resources.libraries.python.DPDK.L3fwdTest -| Library | resources.libraries.python.DPDK.L3fwdCheck -| Library | Collections - -*** Keywords *** -| Start testpmd on all DUTs -| | [Documentation] | Start the testpmd with M worker threads and rxqueues N and -| | ... | jumbo support frames on/off on all DUTs. -| | -| | ... | *Arguments:* -| | ... | - phy_cores - Number of physical cores to use. Type: integer -| | ... | - rx_queues - Number of RX queues. Type: integer -| | ... | - jumbo_frames - Jumbo frames on/off: boolean -| | ... | - rxd - Number of RX descriptors. Type: integer -| | ... | - txd - Number of TX descriptors. Type: integer -| | -| | ... | *Example:* -| | -| | ... | \| Start testpmd on all DUTs \| ${1} \| ${1} \| ${False} \| -| | -| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo_frames}=${False} -| | ... | ${rxd}=${None} | ${txd}=${None} -| | -| | ${cpu_count_int} | Convert to Integer | ${phy_cores} -| | ${dp_count_int} | Convert to Integer | ${phy_cores} -| | ${dp_cores}= | Evaluate | ${cpu_count_int}+1 -| | FOR | ${dut} | IN | @{duts} -| | | &{compute_resource_info}= | Get Affinity Vswitch -| | | ... | ${nodes} | ${dut} | ${phy_cores} | rx_queues=${rx_queues} -| | | ... | rxd=${rxd} | txd=${txd} -| | | Set Test Variable | &{compute_resource_info} -| | | Create compute resources variables -| | | Start testpmd -| | | ... | ${nodes['${dut}']} | ${${dut}_pf1}[0] | ${${dut}_pf2}[0] -| | | ... | ${cpu_dp} | ${dp_count_int} | ${rxq_count_int} | ${jumbo_frames} -| | | ... | ${nic_rxq_size} | ${nic_txq_size} -| | FOR | ${dut} | IN | @{duts} -| | | Check testpmd -| | | ... | ${nodes['${dut}']} -| | END - -| Start l3fwd on all DUTs -| | [Documentation] | Start the l3fwd with M worker threads and rxqueues N and -| | ... | jumbo support frames on/off on all DUTs. -| | -| | ... | *Arguments:* -| | ... | - phy_cores - Number of physical cores to use. Type: integer -| | ... | - rx_queues - Number of RX queues. Type: integer -| | ... | - jumbo_frames - Jumbo frames on/off: boolean -| | ... | - rxd - Number of RX descriptors. Type: integer -| | ... | - txd - Number of TX descriptors. Type: integer -| | -| | ... | *Example:* -| | -| | ... | \| Start l3fwd on all DUTs \| ${1} \| ${1} \| ${False} \| -| | -| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo_frames}=${False} -| | ... | ${rxd}=${None} | ${txd}=${None} -| | -| | ${cpu_count_int} | Convert to Integer | ${phy_cores} -| | ${dp_count_int} | Convert to Integer | ${phy_cores} -| | ${dp_cores}= | Evaluate | ${cpu_count_int}+1 -| | FOR | ${dut} | IN | @{duts} -| | | &{compute_resource_info}= | Get Affinity Vswitch -| | | ... | ${nodes} | ${dut} | ${phy_cores} | rx_queues=${rx_queues} -| | | ... | rxd=${rxd} | txd=${txd} -| | | Set Test Variable | &{compute_resource_info} -| | | Create compute resources variables -| | | Start l3fwd -| | | ... | ${nodes} | ${nodes['${dut}']} | ${${dut}_pf1}[0] | ${${dut}_pf2}[0] -| | | ... | ${cpu_dp} | ${dp_count_int} | ${rxq_count_int} | ${jumbo_frames} -| | FOR | ${dut} | IN | @{duts} -| | | Check l3fwd -| | | ... | ${nodes['${dut}']} -| | END |