diff options
Diffstat (limited to 'resources/libraries')
| -rw-r--r-- | resources/libraries/bash/config/defaults | 8 | ||||
| -rw-r--r-- | resources/libraries/bash/function/README.txt | 20 | ||||
| -rw-r--r-- | resources/libraries/bash/function/artifacts.sh | 79 | ||||
| -rw-r--r-- | resources/libraries/bash/function/branch.sh | 6 | ||||
| -rwxr-xr-x | resources/libraries/bash/k8s_setup.sh | 65 | ||||
| -rw-r--r-- | resources/libraries/bash/shell/k8s_utils.sh | 132 |
6 files changed, 2 insertions, 308 deletions
diff --git a/resources/libraries/bash/config/defaults b/resources/libraries/bash/config/defaults deleted file mode 100644 index 6a25a5f04d..0000000000 --- a/resources/libraries/bash/config/defaults +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash - -typeset -A cfg -cfg=( # set default values in config array - [K8S_CALICO]="${SCRIPT_DIR}/../../templates/kubernetes/calico_v2.6.3.yaml" - [K8S_CONTIV_VPP]="https://raw.githubusercontent.com/contiv/vpp/master/k8s/contiv-vpp.yaml" - [K8S_CSIT]="${SCRIPT_DIR}/../../templates/kubernetes/csit.yaml" -) diff --git a/resources/libraries/bash/function/README.txt b/resources/libraries/bash/function/README.txt deleted file mode 100644 index e4eb91565b..0000000000 --- a/resources/libraries/bash/function/README.txt +++ /dev/null @@ -1,20 +0,0 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -Files in this directory system are to be executed indirectly, -sourced from other scripts. - -In fact, the files should only define functions, -except perhaps some minimal logic needed to import dependencies. -The originating function calls should be executed from elsewhere, -typically from entry scripts. diff --git a/resources/libraries/bash/function/artifacts.sh b/resources/libraries/bash/function/artifacts.sh index 15a4dd2fe1..e4d5dd6fc6 100644 --- a/resources/libraries/bash/function/artifacts.sh +++ b/resources/libraries/bash/function/artifacts.sh @@ -1,7 +1,6 @@ #!/usr/bin/env bash -# Copyright (c) 2021 Cisco and/or its affiliates. -# Copyright (c) 2021 PANTHEON.tech and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -26,8 +25,6 @@ function download_artifacts () { # - REPO_URL - FD.io Packagecloud repository. # Functions conditionally called (see their documentation for side effects): # - download_ubuntu_artifacts - # - download_centos_artifacts - # - download_opensuse_artifacts set -exuo pipefail @@ -46,10 +43,6 @@ function download_artifacts () { if [ "${os_id}" == "ubuntu" ]; then download_ubuntu_artifacts || die - elif [ "${os_id}" == "centos" ]; then - download_centos_artifacts || die - elif [ "${os_id}" == "opensuse" ]; then - download_opensuse_artifacts || die else die "${os_id} is not yet supported." fi @@ -129,73 +122,3 @@ function download_ubuntu_artifacts () { } fi } - -function download_centos_artifacts () { - - # Download or install CentOS VPP artifacts from packagecloud.io. - # - # Variables read: - # - REPO_URL - FD.io Packagecloud repository. - # - VPP_VERSION - VPP version. - # - INSTALL - Whether install packages (if set to "true") or download only. - # Default: "false". - - set -exuo pipefail - - curl -s "${REPO_URL}"/script.rpm.sh | sudo -E bash || { - die "Packagecloud FD.io repo fetch failed." - } - # If version is set we will add suffix. - artifacts=() - pkgs=(vpp vpp-selinux-policy vpp-devel vpp-lib vpp-plugins vpp-api-python) - if [ -z "${VPP_VERSION-}" ]; then - artifs+=(${pkgs[@]}) - else - artifs+=(${pkgs[@]/%/-${VPP_VERSION-}}) - fi - - if [[ "${INSTALL:-false}" == "true" ]]; then - sudo yum -y install "${artifs[@]}" || { - die "Install VPP artifact failed." - } - else - sudo yum -y install --downloadonly --downloaddir=. "${artifs[@]}" || { - die "Download VPP artifacts failed." - } - fi -} - -function download_opensuse_artifacts () { - - # Download or install OpenSuSE VPP artifacts from packagecloud.io. - # - # Variables read: - # - REPO_URL - FD.io Packagecloud repository. - # - VPP_VERSION - VPP version. - # - INSTALL - Whether install packages (if set to "true") or download only. - # Default: "false". - - set -exuo pipefail - - curl -s "${REPO_URL}"/script.rpm.sh | sudo -E bash || { - die "Packagecloud FD.io repo fetch failed." - } - # If version is set we will add suffix. - artifs=() - pkgs=(vpp vpp-devel vpp-lib vpp-plugins libvpp0) - if [ -z "${VPP_VERSION-}" ]; then - artifs+=(${pkgs[@]}) - else - artifs+=(${pkgs[@]/%/-${VPP_VERSION-}}) - fi - - if [[ "${INSTALL:-false}" == "true" ]]; then - sudo yum -y install "${artifs[@]}" || { - die "Install VPP artifact failed." - } - else - sudo yum -y install --downloadonly --downloaddir=. "${artifs[@]}" || { - die "Download VPP artifacts failed." - } - fi -} diff --git a/resources/libraries/bash/function/branch.sh b/resources/libraries/bash/function/branch.sh index ba9cc39c67..37900eab01 100644 --- a/resources/libraries/bash/function/branch.sh +++ b/resources/libraries/bash/function/branch.sh @@ -1,4 +1,4 @@ -# Copyright (c) 2021 Cisco and/or its affiliates. +# Copyright (c) 2023 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -57,10 +57,6 @@ function checkout_csit_for_vpp () { set -exuo pipefail case "${1}" in - "stable/2009") - # LTS branch - branch_id="origin/${1/stable\//oper-rls}_lts" - ;; "stable/"*) branch_id="origin/${1/stable\//oper-rls}" ;; diff --git a/resources/libraries/bash/k8s_setup.sh b/resources/libraries/bash/k8s_setup.sh deleted file mode 100755 index d1d3a38454..0000000000 --- a/resources/libraries/bash/k8s_setup.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/bash -# Copyright (c) 2021 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -xo pipefail - -SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" - -# Include -source ${SCRIPT_DIR}/config/defaults -source ${SCRIPT_DIR}/shell/k8s_utils.sh - -trap "k8s_utils.destroy" ERR - -case "$1" in - prepare) - # Revert any changes made to this host by 'kubeadm init' - k8s_utils.destroy - # Sets up the Kubernetes master - k8s_utils.prepare - ;; - deploy_calico) - # Revert any changes made to this host by 'kubeadm init' - k8s_utils.destroy - # Load kernel modules uio/uio_pci_generic - sudo modprobe uio - sudo modprobe uio_pci_generic - sudo modprobe vfio_pci - # Sets up the Kubernetes master - k8s_utils.prepare "--pod-network-cidr=192.168.0.0/16" - # Apply resources - k8s_utils.calico_deploy ${cfg[K8S_CALICO]} - # Dump Kubernetes objects ... - k8s_utils.dump_all - ;; - affinity_non_vpp) - # Set affinity for all non VPP docker containers to CPU 0 - k8s_utils.affinity_non_vpp - ;; - destroy) - # Revert any changes made to this host by 'kubeadm init' - k8s_utils.destroy - ;; - *) - echo "usage: $0 function" - echo "function:" - echo " prepare" - echo " deploy_calico" - echo " affinity_non_vpp" - echo " destroy" - exit 1 -esac -shift - -echo Kubernetes setup finished diff --git a/resources/libraries/bash/shell/k8s_utils.sh b/resources/libraries/bash/shell/k8s_utils.sh deleted file mode 100644 index b96ec8df6c..0000000000 --- a/resources/libraries/bash/shell/k8s_utils.sh +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/bash -# Copyright (c) 2021 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -function k8s_utils.destroy { - # Destroy existing Kubernetes deployment - kubectl drain $HOSTNAME --delete-local-data --force --ignore-daemonsets - kubectl delete node $HOSTNAME - - # Revert any changes made to this host by 'kubeadm init' or 'kubeadm join' - sudo kubeadm reset --force && sudo rm -rf $HOME/.kube || \ - { echo "Failed to reset kubeadm"; exit 1; } -} - -function k8s_utils.prepare { - # Sets up the Kubernetes master - - # Disable swap - sudo swapoff --all - - # Set up the Kubernetes master - sudo -E kubeadm init --token-ttl 0 ${1} || \ - { echo "Failed to init kubeadm"; exit 1; } - - # Make cgroup non-exclusive for CPU and MEM - sudo cgset -r cpuset.cpu_exclusive=0 /kubepods - sudo cgset -r cpuset.mem_exclusive=0 /kubepods - - rm -rf $HOME/.kube - mkdir -p $HOME/.kube - sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config - sudo chown $(id -u):$(id -g) $HOME/.kube/config -} - -function k8s_utils.taint { - # Updates the taints - kubectl taint nodes --all node-role.kubernetes.io/master- || \ - { echo "Failed to taint nodes"; exit 1; } -} - -function k8s_utils.calico_deploy { - # Calico yaml URL or file - k8s_calico=$1 - - # Apply resources - kubectl apply -f ${k8s_calico} || \ - { echo "Failed to apply ${k8s_calico}"; exit 1; } - - # Update the taints - k8s_utils.taint -} - -function k8s_utils.contiv_vpp_deploy { - # Contiv yaml URL or file - k8s_contiv=$1 - k8s_contiv_patch="kubecon.contiv-vpp-yaml-patch.diff" - - # Pull the most recent Docker images - url="https://raw.githubusercontent.com/contiv/vpp/master/k8s/pull-images.sh" - bash <(curl -s "${url}") - - # Apply resources - wget ${k8s_contiv} - patch contiv-vpp.yaml -i ${k8s_contiv_patch} -o - | kubectl apply -f - || \ - { echo "Failed to apply Contiv resources"; exit 1; } - rm contiv-vpp.yaml - - # Update the taints - k8s_utils.taint -} - -function k8s_utils.cri_shim_install { - # Install the CRI Shim on host - url"https://raw.githubusercontent.com/contiv/vpp/master/k8s/cri-install.sh" - sudo su root -c "bash <(curl -s '${url}')" -} - -function k8s_utils.cri_shim_uninstall { - # Uninstall the CRI Shim on host - url="https://raw.githubusercontent.com/contiv/vpp/master/k8s/cri-install.sh" - sudo su root -c "bash <(curl -s '${url}') --uninstall" -} - -function k8s_utils.kube_proxy_install { - # Installing custom version of Kube-Proxy to enable Kubernetes services - url="https://raw.githubusercontent.com/contiv/vpp/master/k8s/" - url+="proxy-install.sh" - bash <(curl -s "${url}") -} - -function k8s_utils.apply { - # Resource yaml URL or file - k8s_resource=$1 - - # Apply resources - kubectl apply -f ${k8s_resource} || \ - { echo "Failed to apply ${k8s_resource}"; exit 1; } -} - -function k8s_utils.resource_delete { - # Resource yaml URL or file - k8s_resource=$1 - - # Delete resources - kubectl delete -f ${k8s_resource} || \ - { echo "Failed to delete ${k8s_resource}"; exit 1; } -} - -function k8s_utils.affinity_non_vpp { - # Set affinity for all non VPP docker containers to CPU 0 - command='sudo docker ps --format "{{.ID}} {{.Names}}"' - command+=" | grep -v vpp | cut -d' ' -f1" - for i in $(${command}); do - sudo docker update --cpuset-cpus 0 ${i} - done -} - -function k8s_utils.dump_all { - # Dumps the kubernetes objects - kubectl get all --all-namespaces - kubectl describe nodes -} |