aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries')
-rw-r--r--resources/libraries/robot/l2/l2_bridge_domain.robot41
-rw-r--r--resources/libraries/robot/l2/l2_xconnect.robot40
-rw-r--r--resources/libraries/robot/overlay/vxlan.robot91
-rw-r--r--resources/libraries/robot/shared/traffic.robot49
4 files changed, 129 insertions, 92 deletions
diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot
index fda211508b..4c3d629b98 100644
--- a/resources/libraries/robot/l2/l2_bridge_domain.robot
+++ b/resources/libraries/robot/l2/l2_bridge_domain.robot
@@ -32,6 +32,47 @@
| | ... | Vpp Add L2fib Entry | ${dut_node} | ${mac} | ${if2} | ${1}
| | Vpp Node Interfaces Ready Wait | ${dut_node}
+| Initialize L2 bridge domain on node
+| | [Documentation]
+| | ... | Setup L2 bridge domain topology by adding two interfaces on DUT into
+| | ... | separate bridge domains that are created automatically starting with
+| | ... | index 1. Learning is enabled. Interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut - DUT node. Type: string
+| | ... | - count - Number of bridge domains interfaces. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domain on node \| DUT1 \| 1 \|
+| | ...
+| | [Arguments] | ${dut} | ${count}=${1}
+| | ...
+| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| | | ${dut_str}= | Convert To Lowercase | ${dut}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} | ${id}
+| | | Add interface to bridge domain
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} | ${id}
+
+| Initialize L2 bridge domain
+| | [Documentation]
+| | ... | Setup L2 bridge domain topology by adding two interfaces on each DUT
+| | ... | into separate bridge domains that are created automatically starting
+| | ... | with index 1. Learning is enabled. Interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - count - Number of bridge domains. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 bridge domain \| 1 \|
+| | ...
+| | [Arguments] | ${count}=${1}
+| | ...
+| | :FOR | ${dut} | IN | @{duts}
+| | | Initialize L2 bridge domain on node | ${dut} | count=${count}
+
| Configure path for 3-node BD-SHG test
| | [Documentation] | Compute path for bridge domain split-horizon group testing
| | ... | on three given nodes with following interconnections
diff --git a/resources/libraries/robot/l2/l2_xconnect.robot b/resources/libraries/robot/l2/l2_xconnect.robot
index 00d33e867a..745827eb3e 100644
--- a/resources/libraries/robot/l2/l2_xconnect.robot
+++ b/resources/libraries/robot/l2/l2_xconnect.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -22,3 +22,41 @@
| | Set Interface State | ${node} | ${if1} | up
| | Set Interface State | ${node} | ${if2} | up
| | Vpp Setup Bidirectional Cross Connect | ${node} | ${if1} | ${if2}
+
+| Initialize L2 cross connect on node
+| | [Documentation]
+| | ... | Setup L2 cross connect topology by connecting RX/TX of two interfaces
+| | ... | on each DUT. Interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut - DUT node. Type: string
+| | ... | - count - Number of interfaces pairs to connect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 cross connect on node \| DUT1 \| 1 \|
+| | ...
+| | [Arguments] | ${dut} | ${count}=${1}
+| | ...
+| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| | | ${dut_str}= | Convert To Lowercase | ${dut}
+| | | Vpp Setup Bidirectional Cross Connect | ${nodes['${dut}']}
+| | | ... | ${${dut_str}_${prev_layer}_${id}_1}
+| | | ... | ${${dut_str}_${prev_layer}_${id}_2}
+
+| Initialize L2 cross connect
+| | [Documentation]
+| | ... | Setup L2 cross connect topology by connecting RX/TX of two interfaces
+| | ... | on each DUT. Interfaces are brought up.
+| | ...
+| | ... | *Arguments:*
+| | ... | - count - Number of interfaces pairs to connect. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize L2 cross connect \| 1 \|
+| | ...
+| | [Arguments] | ${count}=${1}
+| | ...
+| | :FOR | ${dut} | IN | @{duts}
+| | | Initialize L2 cross connect on node | ${dut} | count=${count}
diff --git a/resources/libraries/robot/overlay/vxlan.robot b/resources/libraries/robot/overlay/vxlan.robot
index 5e9fa3ddef..06c8e94eb7 100644
--- a/resources/libraries/robot/overlay/vxlan.robot
+++ b/resources/libraries/robot/overlay/vxlan.robot
@@ -27,48 +27,6 @@
| Documentation | VXLAN keywords
*** Keywords ***
-| Configure IP addresses and neighbors on interfaces
-| | [Documentation] | *Set IPv4 addresses on interfaces on DUTs.*
-| | ... | If interface index is None then is determines with Get Interface Sw
-| | ... | Index in this case it is required the interface to be present in
-| | ... | topology dict. It also executes VPP IP Probe to determine MACs to IPs
-| | ... | on DUTs.
-| | ...
-| | ... | _Set testcase variables with IP addresses and prefix length:_
-| | ... | - ${dut1s_ip_address}
-| | ... | - ${dut2s_ip_address}
-| | ... | - ${duts_ip_address_prefix}
-| | ...
-| | [Arguments] | ${DUT1} | ${DUT1_INT_NAME} | ${DUT1_INT_INDEX}
-| | ... | ${DUT2} | ${DUT2_INT_NAME} | ${DUT2_INT_INDEX}
-| | Set Test Variable | ${dut1s_ip_address} | 172.16.0.1
-| | Set Test Variable | ${dut2s_ip_address} | 172.16.0.2
-| | Set Test Variable | ${duts_ip_address_prefix} | 24
-| | ${DUT1_INT_KEY}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| | ... | Get Interface by name | ${DUT1} | ${DUT1_INT_NAME}
-| | ${DUT2_INT_KEY}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| | ... | Get Interface by name | ${DUT2} | ${DUT2_INT_NAME}
-| | ${DUT1_INT_INDEX}= | Run Keyword If | ${DUT1_INT_INDEX} is None
-| | ... | Get Interface Sw Index | ${DUT1} | ${DUT1_INT_KEY}
-| | ... | ELSE | Set Variable | ${DUT1_INT_INDEX}
-| | ${DUT2_INT_INDEX}= | Run Keyword If | ${DUT2_INT_INDEX} is None
-| | ... | Get Interface Sw Index | ${DUT2} | ${DUT2_INT_KEY}
-| | ... | ELSE | Set Variable | ${DUT2_INT_INDEX}
-| | ${DUT1_INT_MAC}= | Vpp Get Interface Mac | ${DUT1} | ${DUT1_INT_INDEX}
-| | ${DUT2_INT_MAC}= | Vpp Get Interface Mac | ${DUT2} | ${DUT2_INT_INDEX}
-| | VPP Interface Set IP Address | ${DUT1} | ${DUT1_INT_INDEX}
-| | ... | ${dut1s_ip_address} | ${duts_ip_address_prefix}
-| | VPP Interface Set IP Address | ${DUT2} | ${DUT2_INT_INDEX}
-| | ... | ${dut2s_ip_address} | ${duts_ip_address_prefix}
-| | VPP Add IP Neighbor
-| | ... | ${DUT1} | ${DUT1_INT_INDEX} | ${dut2s_ip_address} | ${DUT2_INT_MAC}
-| | VPP Add IP Neighbor
-| | ... | ${DUT2} | ${DUT2_INT_INDEX} | ${dut1s_ip_address} | ${DUT1_INT_MAC}
-
-| Add interfaces to L2BD
-| | [Arguments] | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
-| | Vpp Add L2 Bridge Domain | ${DUT} | ${BID} | ${INTERFACE_1} | ${INTERFACE_2}
-
| Create vlan interfaces for VXLAN
| | [Documentation] | *Create VLAN subinterface on interfaces on DUTs with given
| | ... | VLAN ID.*
@@ -93,55 +51,6 @@
| | Set Test Variable | ${dut2s_vlan_name}
| | Set Test Variable | ${dut2s_vlan_index}
-| Send VXLAN encapsulated packet and verify received packet
-| | [Documentation] | Send VXLAN encapsulated Ethernet frame and check \
-| | ... | received one.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: dictionary
-| | ... | - tx_if - Interface from where send VXLAN packet. Type: string
-| | ... | - rx_if - Interface where receive VXLAN packet. Type: string
-| | ... | - tx_src_mac - Source MAC address of sent packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of sent packet. Type: string
-| | ... | - tx_src_ip - Source IP address of sent VXLAN packet. Type: string
-| | ... | - tx_dst_ip - Destination IP address of sent VXLAN packet.
-| | ... | Type: string
-| | ... | - tx_vni - VNI of sent VXLAN packet. Type: string
-| | ... | - rx_src_ip - Source IP address of received VXLAN packet. Type: string
-| | ... | - rx_dst_ip - Destination IP address of received VXLAN packet.
-| | ... | Type: string
-| | ... | - rx_vni - VNI of received VXLAN packet. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send VXLAN encapsulated packet and verify received packet \
-| | ... | \| ${tg_node} \| port4 \| port4 \
-| | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \
-| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \|
-| | ...
-| | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if}
-| | ... | ${tx_src_mac} | ${tx_dst_mac}
-| | ... | ${tx_src_ip} | ${tx_dst_ip} | ${tx_vni}
-| | ... | ${rx_src_ip} | ${rx_dst_ip} | ${rx_vni}
-| | ${tx_if_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_if_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if ${tx_if_name}
-| | ... | --rx_if ${rx_if_name}
-| | ... | --tx_src_mac ${tx_src_mac}
-| | ... | --tx_dst_mac ${tx_dst_mac}
-| | ... | --tx_src_ip ${tx_src_ip}
-| | ... | --tx_dst_ip ${tx_dst_ip}
-| | ... | --tx_vni ${tx_vni}
-| | ... | --rx_src_ip ${rx_src_ip}
-| | ... | --rx_dst_ip ${rx_dst_ip}
-| | ... | --rx_vni ${rx_vni}
-| | Run Traffic Script On Node | send_vxlan_check_vxlan.py | ${tg_node}
-| | ... | ${args}
-
| Get VXLAN dump
| | [Documentation] | Get VXLAN dump.
| | ...
diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot
index c930bcf92e..b29f7af49d 100644
--- a/resources/libraries/robot/shared/traffic.robot
+++ b/resources/libraries/robot/shared/traffic.robot
@@ -581,3 +581,52 @@
| | ${dscp_num}= | Get DSCP Num Value | ${dscp}
| | ${args}= | Set Variable | ${args} --dscp ${dscp_num}
| | Run Traffic Script On Node | policer.py | ${node} | ${args}
+
+| Send VXLAN encapsulated packet and verify received packet
+| | [Documentation] | Send VXLAN encapsulated Ethernet frame and check \
+| | ... | received one.
+| | ...
+| | ... | *Arguments:*
+| | ... | - tg_node - Node where to run traffic script. Type: dictionary
+| | ... | - tx_if - Interface from where send VXLAN packet. Type: string
+| | ... | - rx_if - Interface where receive VXLAN packet. Type: string
+| | ... | - tx_src_mac - Source MAC address of sent packet. Type: string
+| | ... | - tx_dst_mac - Destination MAC address of sent packet. Type: string
+| | ... | - tx_src_ip - Source IP address of sent VXLAN packet. Type: string
+| | ... | - tx_dst_ip - Destination IP address of sent VXLAN packet.
+| | ... | Type: string
+| | ... | - tx_vni - VNI of sent VXLAN packet. Type: string
+| | ... | - rx_src_ip - Source IP address of received VXLAN packet. Type: string
+| | ... | - rx_dst_ip - Destination IP address of received VXLAN packet.
+| | ... | Type: string
+| | ... | - rx_vni - VNI of received VXLAN packet. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send VXLAN encapsulated packet and verify received packet \
+| | ... | \| ${tg_node} \| port4 \| port4 \
+| | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \
+| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \|
+| | ...
+| | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if}
+| | ... | ${tx_src_mac} | ${tx_dst_mac}
+| | ... | ${tx_src_ip} | ${tx_dst_ip} | ${tx_vni}
+| | ... | ${rx_src_ip} | ${rx_dst_ip} | ${rx_vni}
+| | ${tx_if_name}= | Get interface name | ${tg_node} | ${tx_if}
+| | ${rx_if_name}= | Get interface name | ${tg_node} | ${rx_if}
+| | ${args}= | Catenate
+| | ... | --tx_if ${tx_if_name}
+| | ... | --rx_if ${rx_if_name}
+| | ... | --tx_src_mac ${tx_src_mac}
+| | ... | --tx_dst_mac ${tx_dst_mac}
+| | ... | --tx_src_ip ${tx_src_ip}
+| | ... | --tx_dst_ip ${tx_dst_ip}
+| | ... | --tx_vni ${tx_vni}
+| | ... | --rx_src_ip ${rx_src_ip}
+| | ... | --rx_dst_ip ${rx_dst_ip}
+| | ... | --rx_vni ${rx_vni}
+| | Run Traffic Script On Node | send_vxlan_check_vxlan.py | ${tg_node}
+| | ... | ${args}