diff options
Diffstat (limited to 'resources/tools/disk-image-builder/centos/build.sh')
| -rwxr-xr-x | resources/tools/disk-image-builder/centos/build.sh | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/resources/tools/disk-image-builder/centos/build.sh b/resources/tools/disk-image-builder/centos/build.sh deleted file mode 100755 index 0276df8d4f..0000000000 --- a/resources/tools/disk-image-builder/centos/build.sh +++ /dev/null @@ -1,265 +0,0 @@ -#!/bin/bash -e - -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Purpose of this script is to build a VirtualBox or QCOW2 disk image -# for use with CSIT testing. -# -# As input parameters, the script takes: -# -# - A base Linux distribution (currently, only "ubuntu-14.04.4" is -# supported), -# - A release timestamp in the format "YYYY-MM-DD" eg. "2016-05-21". -# This timestamp MUST reference to a list of packages (APT, PIP) -# that was previously generated by the "listmaker" VM and script. -# - A path to the nested VM image. -# -# The bullk of the work is done by packer, -# while this script does some of the pre- and post-processing. -# Steps executed are: -# -# 1.) Determine if building a QCOW or VirtualBox image. Currently, -# we build a QCOW image if VIRL_* environment variables are -# present (and we therefore assume we are building for VIRL), -# or VirtualBox otherwise. -# -# 2.) Download packer, if not already installed. -# -# 3.) Download APT and PIP packages as required for the image. -# We're downloading them here, rather than letting the VM -# download them off the public internet, for two reasons: -# a.) This allows us to keep and cache packets between runs -# and download them only once, -# b.) This means only the build host needs a working proxy -# configuration and we do not need to worry about setting -# a proxy inside the VM. -# -# 4.) Link the nested VM image into the main VM's temp directory -# -# 5.) Create Version and Changelog files -# -# 6.) Run Packer. Packer, in turn, will: -# 6.1.) Download the Operating System ISO image, -# 6.2.) Start a VM using the selected hypervisor (VirtualBox or Qemu), -# 6.3.) Boot the VM using the ISO image and send initial keystrokes -# to initiate installation using a Preseed or Kickstart file, -# 6.4.) Drive the installation using until the point the VM is reachable -# over SSH, -# 6.5.) Copy the temporary directory populated in steps 3-5 above to the VM, -# 6.6.) Run a script on the VM that performs post-installation: -# 6.6.1.) Install selected .deb packages -# 6.6.2.) Install PIP packages as per requirements.txt file -# 6.6.3.) Install nested VM image and VERSION/CHANGELOG files -# 6.7.) Run a script on VM that creates a Vagrant user (VirtualBox only) -# 6.8.) Run a script on VM that performs clean-up: -# 6.8.1.) Remove any temporary files created, -# 6.8.2.) Remove SSH host-keys -# 6.8.3.) Remove root user password -# 6.8.4.) Shut down the VM -# 6.9.) [TODO]: Upload the image to VIRL (QCOW only), -or- -# Convert the image into a Vagrant box (VirtualBox only), and -# [TODO/FIX]: Upload the Vagrant box to Atlas (VirtualBox only) -# -# 7.) Clean up - -### -### 0. Set constants and verify parameters. -### -cd $(dirname $0) -BUILD_DIR="$(pwd)/build" -PACKER_DIR="${BUILD_DIR}/packer" - -RPM_CACHE_DIR="${BUILD_DIR}/cache/rpm" -PIP_CACHE_DIR="${BUILD_DIR}/cache/pip" - -PACKER_TEMPLATE="$1.json" -LISTS_DIR="$(dirname $0)/lists" - -function syntax { - echo 'Syntax: $0 <Operating System> <Release> <Nested VM image>' - echo - echo '<Operating System>: Base distro, eg. ubuntu-14.04.4' - echo '<Release>: Release timestamp, eg. 2016-05-21' - echo '<Nested VM image>: Path to nested VM image' - - exit 1 -} - -## Parse command line options - -OS=$1 -RELDATE=$2 -NESTED_IMG=$3 - -if [ "$3" = "" ] -then - syntax -fi - -## Identify version by looking at topmost version statement in CHANGELOG - -VERSION=$(cat $(dirname $0)/CHANGELOG | grep '^## ' | head -1 | \ - sed -e 's/.*\[\(.*\)\].*/\1/') -if [ "${VERSION}" = "" ] -then - echo "Unable to determine build version from CHANGELOG file. Make sure" - echo "that there is an entry for the most recent version in CHANGELOG," - echo "and that the entry is formated like" - echo - echo "## [1.0] - 2016-05-20" - exit 1 -fi -RELEASE="csit-${OS}_${RELDATE}_${VERSION}" - -OUTPUT_DIR="${BUILD_DIR}/output/${RELEASE}" -LIST="${LISTS_DIR}/${OS}_${RELDATE}_${VERSION}" - -if [ ! -d "${LIST}" ] -then - echo "${LIST} not found" - syntax - exit 1 -fi -if [ ! -f $NESTED_IMG ] -then - echo "Nested image $NESTED_IMG not found" - syntax - exit 1 -fi - -ATLAS_RELDATE=${RELDATE//-} -ATLAS_VERSION="${ATLAS_RELDATE}.${VERSION}" - -# Find an MD5 checksum utility - -MD5UTIL=$(which md5sum) || MD5UTIL=$(which md5) -if [ $? -ne 0 ] -then - echo "No MD5 utility found." - echo "Please make sure you either have \"md5sum\" or \"md5\" installed." - exit 1 -fi - -### -### 1. Determine build target. -### -if [ "$VIRL_USER" = "" ] || [ "$VIRL_PASSWORD" = "" ] -then - OUTPUT_PROVIDER="virtualbox" -else - OUTPUT_PROVIDER="qemu" -fi - -echo "Building version $VERSION for ${OUTPUT_PROVIDER}" -echo "Release ${RELEASE}" -echo "Using Nested VM image: ${NESTED_IMG}" -echo - - -### -### 2. Download and extract packer, if not already installed -### -packer_os=$(uname -s) -if [ "$packer_os" = "Darwin" ] -then - packer_url="https://releases.hashicorp.com/packer/0.10.1/packer_0.10.1_darwin_amd64.zip" -elif [ "$packer_os" = "Linux" ] -then - packer_url="https://releases.hashicorp.com/packer/0.10.1/packer_0.10.1_linux_amd64.zip" -fi - -mkdir -p $BUILD_DIR -wget -P ${PACKER_DIR} -N ${packer_url} - -unzip -n ${PACKER_DIR}/packer*zip -d ${PACKER_DIR} - -### -### 3. Download RPM and PIP packages, and cache them -### Verify downloaded RPM packages. -### Link required packages into a temp directory for the VM image. -### - - -rm -fr ${OUTPUT_DIR} -mkdir -p ${OUTPUT_DIR}/temp/rpm -mkdir -p ${RPM_CACHE_DIR} - -RPM_FILE="${LIST}/rpm-packages.txt" -REPO_FILE="${LIST}/Centos-Vault.repo" -### -### Copy rpm package list to cache dir because we are going to use yum on the image -### -echo cp $RPM_FILE ${RPM_CACHE_DIR} -cp $RPM_FILE ${RPM_CACHE_DIR} -if [ -e $REPO_FILE ] ; then - echo cp $REPO_FILE ${RPM_CACHE_DIR} - cp $REPO_FILE ${RPM_CACHE_DIR} - ln ${RPM_CACHE_DIR}/Centos-Vault.repo ${OUTPUT_DIR}/temp/rpm/Centos-Vault.repo -fi -ln ${RPM_CACHE_DIR}/rpm-packages.txt ${OUTPUT_DIR}/temp/rpm/rpm-packages.txt - -## PIP - -mkdir -p ${PIP_CACHE_DIR} - -# Let PIP do the work of downloading and verifying packages -pip download -d ${PIP_CACHE_DIR} -r ${LIST}/pip-requirements.txt - -# Link packages and requirements file into VM's temp directory -mkdir -p ${OUTPUT_DIR}/temp/pip -ln ${PIP_CACHE_DIR}/* ${OUTPUT_DIR}/temp/pip/ -ln ${LIST}/pip-requirements.txt ${OUTPUT_DIR}/temp/requirements.txt - -### -### 4. Link the nested VM image -### -rm -fr ${OUTPUT_DIR}/temp/nested-vm -mkdir ${OUTPUT_DIR}/temp/nested-vm -ln $NESTED_IMG ${OUTPUT_DIR}/temp/nested-vm/ - -### -### 5. Create Version and Changelog files -### - -echo ${RELEASE} > ${OUTPUT_DIR}/temp/VERSION -ln CHANGELOG ${OUTPUT_DIR}/temp/CHANGELOG - -### -### 6. Run packer -### -export PACKER_LOG=1 -export PACKER_LOG_PATH=${OUTPUT_DIR}/packer.log -${PACKER_DIR}/packer build -var "release=${RELEASE}" \ - -only ${RELEASE}-${OUTPUT_PROVIDER} \ - -var "output_dir=${OUTPUT_DIR}/packer" \ - -var "temp_dir=${OUTPUT_DIR}/temp" \ - -var "atlas_version=${ATLAS_VERSION}" \ - -force \ - -machine-readable ${PACKER_TEMPLATE} - -# TODO: Need to figure out "packer push" later. Currently keeps failing. -# ${PACKER_DIR}/packer push -name ckoester/test123 -var "release=${RELEASE}" \ -# -var "output_dir=${OUTPUT_DIR}/packer" \ -# -var "temp_dir=${OUTPUT_DIR}/temp" \ -# ${PACKER_TEMPLATE} - -### -### 7. Clean up -### -rm -fr ${OUTPUT_DIR}/temp - -echo "Done." -echo "Artifacts:" -echo -ls -lR ${OUTPUT_DIR} |