1 files changed, 0 insertions, 366 deletions
diff --git a/resources/tools/disk-image-builder/centos/run-listmaker.sh b/resources/tools/disk-image-builder/centos/run-listmaker.sh
deleted file mode 100755
index 17e9c3dba3..0000000000
--- a/resources/tools/disk-image-builder/centos/run-listmaker.sh
+++ /dev/null
@@ -1,366 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This script is to spin up a simulation in VIRL, and fetch the URLs for all packages
-# that the user would obtain if they did an "yum update" today.
-#
-# This entire step is neither secure nor portable. The assumption --for now-- is that
-# this will only ever be run in LF CSIT VIRL lab. Should the requirement arise to
-# run this elsewhere, then additional work may be required to make this more
-# portable.
-
-# This script requires that the following two environment variables be defined-
-#
-# $VIRL_USER
-# $VIRL_PASSWORD
-
-VERSION=$(cat $(dirname $0)/CHANGELOG  | grep '^## ' | head -1 | sed -e 's/.*\[\(.*\)\].*/\1/')
-if [ "${VERSION}" = "" ]
-then
-  echo "Unable to determine build version from CHANGELOG file. Make sure"
-  echo "that there is an entry for the most recent version in CHANGELOG,"
-  echo "and that the entry is formated like"
-  echo
-  echo "## [1.0] - 2016-05-20"
-  exit 1
-fi
-DATE=$(date +%Y-%m-%d)
-
-RPMS_TMP_DIR=`mktemp -d`
-RPMS_WANTED_FILE=$RPMS_TMP_DIR/rpms_wanted.txt
-REPO_MOD_FILE=$RPMS_TMP_DIR/Centos-Vault.repo
-
-if [ "$1" == "centos-7.3-1611" ]
-then
-    OS="centos-7.3-1611"
-    VIRL_TOPOLOGY_FILE="listmaker/virl-listmaker-centos-7.3-1611.yaml"
-echo '
-# C7.3.1611
-[C7.3.1611-base]
-name=CentOS-7.3.1611 - Base
-baseurl=http://vault.centos.org/7.3.1611/os/$basearch/
-gpgcheck=1
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
-enabled=1
-
-[C7.3.1611-updates]
-name=CentOS-7.3.1611 - Updates
-baseurl=http://vault.centos.org/7.3.1611/updates/$basearch/
-gpgcheck=1
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
-enabled=1
-
-[C7.3.1611-extras]
-name=CentOS-7.3.1611 - Extras
-baseurl=http://vault.centos.org/7.3.1611/extras/$basearch/
-gpgcheck=1
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
-enabled=1
-
-[C7.3.1611-centosplus]
-name=CentOS-7.3.1611 - CentOSPlus
-baseurl=http://vault.centos.org/7.3.1611/centosplus/$basearch/
-gpgcheck=1
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
-enabled=0
-
-[C7.3.1611-fasttrack]
-name=CentOS-7.3.1611 - CentOSPlus
-baseurl=http://vault.centos.org/7.3.1611/fasttrack/$basearch/
-gpgcheck=1
-gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
-enabled=0
-
-' >  $REPO_MOD_FILE
-else
-    if [ "$1" == "centos-7.4-1711" ]
-        then
-            OS="centos-7.4-1711"
-            VIRL_TOPOLOGY_FILE="listmaker/virl-listmaker-centos-7.4-1711.yaml"
-    elif [ "$1" == "centos-7.6-1810" ]
-        then
-            OS="centos-7.6-1810"
-            VIRL_TOPOLOGY_FILE="listmaker/virl-listmaker-centos-7.6-1810.yaml"
-    else
-        echo specify argument -- probably centos-7.3-1611 , centos-7.4-1711 or centos-7.6-1810
-        exit 1
-    fi
-fi
-
-RELEASE="${OS}_${DATE}_${VERSION}"
-OUTPUT_DIR="lists/${RELEASE}"
-
-echo "Building release ${RELEASE}."
-echo "Storing data in ${OUTPUT_DIR}/."
-
-
-
-# RPM packages wanted
-
-echo '
-#RPM_WANTLIST_INFRA
-nfs-utils
-cloud-init
-pkgconfig
-yum-utils
-#RPM_WANTLIST_CSIT
-python-devel
-python-virtualenv
-python-setuptools
-redhat-rpm-config
-epel-release
-python-srpm-macros
-python-rpm-macros
-python34
-python36-ply
-python36-devel
-python36-pip
-python2-pip-8.1.2-8.el7.noarch http://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/p/
-openssl-devel
-git
-trousers
-strongswan-5.7.2-1.el7.x86_64 http://mirror.math.princeton.edu/pub/epel/7/x86_64/Packages/s/
-python-cffi
-#RPM_WANTLIST_TLDK
-tcpdump
-#RPM_WANTLIST_VPP
-elfutils-libelf
-elfutils-libelf-devel
-kernel-debug-devel
-gcc
-dkms-2.6.1-1.el7.noarch https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/d/
-bridge-utils
-selinux-policy
-selinux-policy-devel
-mbedtls-2.7.10-1.el7.x86_64 https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/
-mbedtls-devel-2.7.10-1.el7.x86_64 https://dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/
-#RPM_WANTLIST_TREX
-zlib-devel
-unzip
-#RPM_WANTLIST_MISC
-socat
-psmisc
-gperftools
-glusterfs
-glusterfs-api
-libiscsi
-libibverbs
-libpcap
-libpcap-devel
-pixman
-libpng
-pulseaudio-libs
-librados2
-librbd1
-librdmacm
-libseccomp
-spice-server
-spice-server-devel
-libusb
-usbredir
-glusterfs-devel
-seavgabios-bin
-sgabios-bin
-ipxe-roms-qemu
-nss-devel
-seabios-bin
-libffi-devel
-boost-filesystem
-#RPM_WANTLIST_NESTED
-trousers
-libnettle
-gnutls
-libcacard
-libcacard-tools
-libcacard-devel
-device-mapper-multipath-libs
-libepoxy
-libibumad
-qemu-img-ev-2.12.0-18.el7_6.3.1.x86_64 http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/
-qemu-kvm-tools-ev-2.12.0-18.el7_6.3.1.x86_64 http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/
-qemu-kvm-common-ev-2.12.0-18.el7_6.3.1.x86_64 http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/
-qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 http://mirror.centos.org/centos/7/virt/x86_64/kvm-common/
-#RPM_WANTLIST_JAVA
-java-1.8.0-openjdk-headless
-java-1.8.0-openjdk-devel
-' > $RPMS_WANTED_FILE
-
-RPM_OUTPUTFILE="${OUTPUT_DIR}/rpm-packages.txt"
-REPO_OUTPUTFILE="${OUTPUT_DIR}/Centos-Vault.repo"
-
-# Python requirements file. Can point to a manually crafted file
-# here, or to the actual CSIT requirements file, or to a symlink.
-
-PIP_REQUIREMENTS="../../../../requirements.txt"
-if [ ! -f ${PIP_REQUIREMENTS} ]
-then
-  echo "PIP requirements file ${PIP_REQUIREMENTS} not found."
-  exit 1
-fi
-
-PIP_OUTPUTFILE="${OUTPUT_DIR}/pip-requirements.txt"
-
-# These will be used for SSH to the listmaker VM, and must match with what
-# was defined in the listmaker VM's kickstart file.
-SSH_USER="root"
-SSH_PASS="csit"
-
-###
-### Spin up simulation
-###
-if [ "$VIRL_USER" = "" ] || [ "$VIRL_PASSWORD" = "" ]
-then
-  echo '$VIRL_USER and $VIRL_PASSWORD environment variables must be defined'
-  exit 1
-fi
-
-output=$(virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} \
-  simengine-launch -f ${VIRL_TOPOLOGY_FILE} 2>&1)
-id=$(echo "${output}" | grep "Simulation ID is " | cut -f 4 -d ' ')
-
-if [ "$id" = "" ]
-then
-  echo "Did not get a simulation ID. Aborting."
-  echo "Output was:"
-  echo "${output}"
-  exit 1
-fi
-
-echo My ID is ${id}
-function stop_sim {
-  virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-stop --session ${id}
-}
-trap stop_sim EXIT
-
-ip="None"
-while [ "${ip}" = "None" ] || [ "${ip}" = "" ]
-do
-  sleep 5
-  output=$(virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-interfaces --session ${id} --nodes listmaker --interfaces management 2>&1)
-  ip=$(echo "${output}" | grep "u'ip-address" | cut -f 4 -d "'" | cut -f 1 -d '/')
-done
-echo "IP is $ip"
-
-sleep 10
-
-if ping -w 60 -c 2 $ip > /dev/null
-then
-  echo Host $ip alive
-else
-  echo Host $ip failed to respond to ping
-  exit 1
-fi
-
-# Wait for SSH to be up
-while ! nc -z $ip 22
-do
-  sleep 3
-done
-
-if [ ! -d ${OUTPUT_DIR} ]; then
-    mkdir -p $OUTPUT_DIR
-fi
-
-###
-### SSH to the VM and perform package installation. Before each step,
-### dry-run and grab the URLs of the packages that would be installed.
-###
-
-function do_ssh {
-  # Helper function: SSH and avoid password prompt
-  sshpass -p $SSH_PASS ssh -o StrictHostKeyChecking=false -o UserKnownHostsFile=/dev/null \
-    -o LogLevel=error ${SSH_USER}@${ip} "$@"
-}
-
-RPM_TEMPFILE=$(mktemp)
-###
-### If there is a repo file specified install it. Freeze yum to release specified above to
-### avoid updating to be packages newer then the specified Centos release. Most packages are
-### installed with yum from a specified Centos version. The packages with urls after them
-### have specific versions and they are installed by rpm from the url.
-###
-
-tmp2=$(mktemp)
-echo '#!/bin/bash' > $tmp2
-
-if [ -e ${REPO_MOD_FILE} ] ; then
-    do_ssh cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.back
-    do_ssh mv /etc/yum.repos.d/CentOS-Vault.repo /etc/yum.repos.d/CentOS-Vault.back
-
-    do_ssh "cat - > /tmp/tmp-Vault.repo" < ${REPO_MOD_FILE}
-    do_ssh cp -f /tmp/tmp-Vault.repo /etc/yum.repos.d/CentOS-Vault.repo
-
-    echo "sed -i '/gpgcheck=1/s/.*/&\nenabled=0/' /etc/yum.repos.d/CentOS-Base.repo" >> $tmp2
-    do_ssh "cat - > /tmp/chrepo.sh" < ${tmp2}
-    do_ssh chmod +x /tmp/chrepo.sh
-    do_ssh /tmp/chrepo.sh
-fi
-PKG_SCRIPT=$(mktemp)
-echo \
-'while IFS='' read -r line || [[ -n $line ]] ; do
-    array=( $line )
-    if [[ -z ${array[0]}  ]] ; then :;
-    elif [[ ${array[0]:0:1} == "#" ]] ; then :;
-    else
-        pkg="${array[0]}"
-        url="${array[1]}"
-        if [[ -z $url ]] ; then
-            yum install -y $pkg
-            echo $pkg >> /tmp/installedpackages.txt
-        else
-            rpm -i --force $url$pkg.rpm
-            echo "$(rpm -q $pkg) $(echo $url)"  >> /tmp/installedpackages.txt
-        fi
-    fi
-done < /tmp/rpms-wanted.txt
-' > $PKG_SCRIPT
-
-do_ssh "cat - > /tmp/installpackages.sh" < $PKG_SCRIPT
-do_ssh "cat - > /tmp/rpms-wanted.txt" < $RPMS_WANTED_FILE
-do_ssh chmod +x /tmp/installpackages.sh
-do_ssh /tmp/installpackages.sh
-
-###
-### Extract package list with versions and urls
-###
-sshpass -p "$SSH_PASS" scp -o StrictHostKeyChecking=false -o UserKnownHostsFile=/dev/null  $SSH_USER@${ip}:/tmp/installedpackages.txt $RPM_TEMPFILE
-
-if [ -e ${REPO_MOD_FILE} ] ; then
-    cp $REPO_MOD_FILE $REPO_OUTPUTFILE
-fi
-cat $RPM_TEMPFILE | sort > $RPM_OUTPUTFILE
-rm -f $RPM_TEMPFILE
-
-### Get Python data. We do this by installing as per our
-### requirements.txt file while fetching a list of all
-### installed modules before and after, and then comparing.
-
-PIP_TEMPFILE_BEFORE=$(mktemp)
-PIP_TEMPFILE_AFTER=$(mktemp)
-do_ssh "cat - > /tmp/requirements.txt" < ${PIP_REQUIREMENTS}
-do_ssh pip list | sort > $PIP_TEMPFILE_BEFORE
-do_ssh pip install -r /tmp/requirements.txt
-do_ssh pip list | sort > $PIP_TEMPFILE_AFTER
-
-comm -1 -3 ${PIP_TEMPFILE_BEFORE} ${PIP_TEMPFILE_AFTER} | \
-  sed -e 's/\(.*\) (\(.*\))/\1==\2/' > $PIP_OUTPUTFILE
-rm -f $PIP_TEMPFILE_BEFORE
-rm -f $PIP_TEMPFILE_AFTER
-
-###
-### Stop VIRL session
-###
-virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-stop --session ${id}
-trap "" EXIT