diff options
Diffstat (limited to 'resources/tools/disk-image-builder/nested/build.sh')
-rwxr-xr-x | resources/tools/disk-image-builder/nested/build.sh | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/resources/tools/disk-image-builder/nested/build.sh b/resources/tools/disk-image-builder/nested/build.sh new file mode 100755 index 0000000000..7eddd64052 --- /dev/null +++ b/resources/tools/disk-image-builder/nested/build.sh @@ -0,0 +1,178 @@ +#!/bin/sh + +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Note: In order to limit the damage this script can do, it is recommended +# to NOT run as root. + +# +# 1. Download buildroot +# 2. Build buildroot kernel and root file system as per +# config files included in this package +# 3. Create empty disk image and extract buildroot root +# file system onto it, make it bootable +# 4. Apply any patches/additions included in this package +# +BUILD_DIR="$(dirname $0)/build" + +BUILDROOT_NAME='buildroot-2016.02' +BUILDROOT_DIR="${BUILD_DIR}/${BUILDROOT_NAME}" +BUILDROOT_TARBALL="${BUILDROOT_NAME}.tar.gz" +BUILDROOT_URL="https://buildroot.org/downloads/${BUILDROOT_TARBALL}" +BUILDROOT_OUTPUT="${BUILDROOT_DIR}/output/images/rootfs.tar" + +DISK_FREE_SIZE=8388608 # Min. free space on disk (8 MB) +DISK_ROUND_TO_NEAREST=16777216 # Round disk size up to nearest (16 MB) + +VERSION=$(cat $(dirname $0)/CHANGELOG | grep '^## ' | head -1 | sed -e 's/.*\[\(.*\)\].*/\1/') +if [ "${VERSION}" = "" ] +then + echo "Unable to determine build version from CHANGELOG file. Make sure" + echo "that there is an entry for the most recent version in CHANGELOG," + echo "and that the entry is formated like" + echo + echo "## [1.0] - 2016-05-16" + exit 1 +fi + +echo Building version: ${VERSION} +echo $VERSION > ${BUILD_DIR}/VERSION +echo "NESTED_VERSION=${VERSION}" > ${BUILD_DIR}/VERSION_HIDDEN +img_name="${BUILD_DIR}/csit-nested-${VERSION}.img" + +# Normally no need to touch the variables below +DISK_SECT_SIZE=512 +DISK_HEADS=16 +DISK_SECT_PER_TRACK=63 +DISK_RESERVED_SECTORS=2048 + +MOUNT_TMPDIR="${BUILD_DIR}/tmp-mount" + +set -e + +# Download buildroot if not already there +wget -P ${BUILD_DIR} -N $BUILDROOT_URL +tar -C ${BUILD_DIR} -xzf ${BUILD_DIR}/$BUILDROOT_TARBALL + +cp -p buildroot-config $BUILDROOT_DIR/.config +cp -p kernel-defconfig $BUILDROOT_DIR/kernel-defconfig +make -C $BUILDROOT_DIR + +if [ ! -f ${BUILDROOT_OUTPUT} ] +then + echo "Buildroot compiled OK, but root file system ${BUILDROOT_OUTPUT}" + echo "does not exist. Somethig is wrong. Exiting." + exit 1 +fi + +# If we got here, it means we downloaded (if applicable) and built (if +# applicable) buildroot OK. +# +# Now let's calculate the required disk size, and build an empty disk. + +buildroot_size=$(stat -c%s ${BUILDROOT_OUTPUT}) +desired_size=$(( ${buildroot_size} + ${DISK_FREE_SIZE} )) +rounded_size=$(( ((${desired_size}/${DISK_ROUND_TO_NEAREST})+1) * \ + ${DISK_ROUND_TO_NEAREST} )) + +echo "Actual root FS size: ${buildroot_size}" +echo "Root FS size + desired free space (${DISK_FREE_SIZE}): ${desired_size}" +echo "Root FS size rounded to nearest ${DISK_ROUND_TO_NEAREST}:" \ + "${rounded_size} ($(( ${rounded_size} / 1024 / 1024 )) MB)" + +# In a normal world, we'd be creating a full-size empty image with "dd", an +# then use fdisk to partition it, and a tool like "kpartx" to map this into +# individual partitions. We'd then map the partition we're interested in. +# However, in order to avoid messing with /dev/mapper, we can also create +# our actual partition first, and then merge it with the MBR+partition table +# "prefix" to obtain our full disk. + +sectors=$(( ${rounded_size} / ${DISK_SECT_SIZE} )) + +disk_prefix=${img_name}.prefix +disk_main=${img_name}.main + +dd if=/dev/zero of=${disk_prefix} bs=${DISK_SECT_SIZE} \ + count=${DISK_RESERVED_SECTORS} +dd if=/dev/zero of=${disk_main} bs=${DISK_SECT_SIZE} \ + count=$(( $sectors - ${DISK_RESERVED_SECTORS} )) + +# Format and mount the root file system +mkfs.ext2 -F -L root ${disk_main} +mkdir -p ${MOUNT_TMPDIR} +sudo mount -o loop ${disk_main} ${MOUNT_TMPDIR} +trap "sudo umount ${MOUNT_TMPDIR}" EXIT + +# Extract the root filesystem +echo "Extracting root filesystem..." +sudo tar -C ${MOUNT_TMPDIR} -xf ${BUILDROOT_OUTPUT} + +# Apply any patches +echo "Applying patches/modifications" +mydir=$(pwd) +cd ${MOUNT_TMPDIR} +sudo run-parts -v ${mydir}/patches +cd ${mydir} + +# Copy version and changelog +sudo cp ${BUILD_DIR}/VERSION ${MOUNT_TMPDIR}/ +sudo cp ${mydir}/CHANGELOG ${MOUNT_TMPDIR}/ +# Also embed this into a hidden file that we can easily retrieve with +# "cat <disk image> | strings | grep NESTED_VERSION" +sudo cp ${BUILD_DIR}/VERSION_HIDDEN ${MOUNT_TMPDIR}/.VERSION.HIDDEN + +# Unmount root filesystem +sudo umount ${MOUNT_TMPDIR} +trap EXIT +rmdir ${MOUNT_TMPDIR} + +# Now create our larger disk +cat ${disk_prefix} ${disk_main} > ${img_name} +rm -f ${disk_prefix} ${disk_main} + +# Create partition table on the disk +sed -e 's/\s*\([\+0-9a-zA-Z]*\).*/\1/' << _EOF | fdisk -H ${DISK_HEADS} -S ${DISK_SECT_PER_TRACK} ${img_name} + o # clear the in memory partition table + n # new partition + p # primary partition + 1 # partition number 1 + ${DISK_RESERVED_SECTORS} # Start a few KB into the disk, leave room for GRUB + # Default - all the way through the end of the disk + a # make a partition bootable + 1 # bootable partition is partition 1 + p # print the in-memory partition table + w # write the partition table + q # and we're done +_EOF + +disk_cylinders=$(fdisk -l -H ${DISK_HEADS} -S ${DISK_SECT_PER_TRACK} ${img_name} | \ + grep cylinders | \ + sed -e 's/.* \([0-9][0-9]*\) cylinders.*/\1/') + +echo "Disk has ${disk_cylinders} cylinders" + +# Install GRUB bootloader on the disk image +${BUILDROOT_DIR}/output/host/sbin/grub --device-map=/dev/null <<_EOF +device (hd0) ${img_name} +geometry (hd0) ${disk_cylinders} ${DISK_HEADS} ${DISK_SECT_PER_TRACK} +root (hd0,0) +setup (hd0) +quit +_EOF + +echo +echo +echo +echo "Your image should be ready in:" +ls -l ${img_name} |