diff options
Diffstat (limited to 'resources/tools/disk-image-builder/nested/buildroot-patches/dpdk.patch')
| -rw-r--r-- | resources/tools/disk-image-builder/nested/buildroot-patches/dpdk.patch | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/resources/tools/disk-image-builder/nested/buildroot-patches/dpdk.patch b/resources/tools/disk-image-builder/nested/buildroot-patches/dpdk.patch new file mode 100644 index 0000000000..29b8bb8de5 --- /dev/null +++ b/resources/tools/disk-image-builder/nested/buildroot-patches/dpdk.patch @@ -0,0 +1,214 @@ +diff --git a/package/Config.in b/package/Config.in +index 6fc0466..ab38a76 100644 +--- a/package/Config.in ++++ b/package/Config.in +@@ -1095,6 +1095,7 @@ menu "Networking" + source "package/cgic/Config.in" + source "package/cppzmq/Config.in" + source "package/czmq/Config.in" ++ source "package/dpdk/Config.in" + source "package/filemq/Config.in" + source "package/flickcurl/Config.in" + source "package/fmlib/Config.in" +diff --git a/package/dpdk/Config.in b/package/dpdk/Config.in +new file mode 100644 +index 0000000..a42271e +--- /dev/null ++++ b/package/dpdk/Config.in +@@ -0,0 +1,54 @@ ++config BR2_PACKAGE_DPDK ++ bool "dpdk" ++ depends on (BR2_i386 && !BR2_x86_i386 && !BR2_x86_i486 \ ++ && !BR2_x86_i586 && !BR2_x86_x1000) \ ++ || BR2_x86_64 || BR2_ARM_CPU_ARMV7A || BR2_aarch64 \ ++ || BR2_aarch64_be ++ depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC ++ depends on BR2_TOOLCHAIN_HAS_SYNC_1 ++ depends on BR2_TOOLCHAIN_HAS_SYNC_2 ++ depends on BR2_TOOLCHAIN_HAS_SYNC_4 ++ depends on BR2_TOOLCHAIN_HAS_SYNC_8 ++ help ++ DPDK is a set of libraries and drivers for fast packet processing. It ++ was designed to run on any processors, however, Intel x86 has been the ++ first CPU to be supported. Ports for other CPUs like IBM Power 8 and ++ ARM are under progress. It runs mostly in Linux userland. A FreeBSD ++ port is now available for a subset of DPDK features. ++ ++ Notes: ++ * To build the included Linux Kernel drivers, it is necessary to ++ enable CONFIG_PCI_MSI, CONFIG_UIO. ++ * To build the PCAP PMD properly, you need to enable the libpcap ++ manually. ++ * You may need to install the python2 interpreter if you want to use ++ scripts dpdk_nic_bind.py and cpu_layout.py ++ ++ http://www.dpdk.org/ ++ ++if BR2_PACKAGE_DPDK ++ ++config BR2_PACKAGE_DPDK_CONFIG ++ string "Configuration" ++ default "i686-native-linuxapp-gcc" \ ++ if BR2_x86_i686 ++ default "x86_64-native-linuxapp-gcc" \ ++ if BR2_x86_64 ++ default "arm-armv7a-linuxapp-gcc" \ ++ if BR2_ARM_CPU_ARMV7A ++ default "arm64-armv8a-linuxapp-gcc" \ ++ if BR2_aarch64 || BR2_aarch64_be ++ ++config BR2_PACKAGE_DPDK_TEST ++ bool "Install tests suite" ++ select BR2_PACKAGE_PYTHON_PEXPECT if BR2_PACKAGE_PYTHON ++ help ++ Install all DPDK tests. If you want to run the tests by the included ++ autotest.py script you need to enable python manually. ++ ++config BR2_PACKAGE_DPDK_EXAMPLES ++ bool "Build & install examples" ++ help ++ Build and install all examples selected by the current configuration. ++ ++endif +diff --git a/package/dpdk/dpdk.hash b/package/dpdk/dpdk.hash +new file mode 100644 +index 0000000..1c47f19 +--- /dev/null ++++ b/package/dpdk/dpdk.hash +@@ -0,0 +1,2 @@ ++# Locally calculated ++sha256 d631495bc6e8d4c4aec72999ac03c3ce213bb996cb88f3bf14bb980dad1d3f7b dpdk-16.04.tar.gz +diff --git a/package/dpdk/dpdk.mk b/package/dpdk/dpdk.mk +new file mode 100644 +index 0000000..02860fd +--- /dev/null ++++ b/package/dpdk/dpdk.mk +@@ -0,0 +1,128 @@ ++################################################################################ ++# ++# dpdk ++# ++################################################################################ ++ ++DPDK_VERSION = 16.04 ++DPDK_SITE = http://dpdk.org/browse/dpdk/snapshot ++DPDK_SOURCE = dpdk-$(DPDK_VERSION).tar.gz ++ ++DPDK_LICENSE = BSD (core), GPLv2+ (Linux drivers) ++DPDK_LICENSE_FILES = GNUmakefile LICENSE.GPL ++DPDK_INSTALL_STAGING = YES ++ ++DPDK_DEPENDENCIES += linux ++ ++ifeq ($(BR2_PACKAGE_LIBPCAP),y) ++DPDK_DEPENDENCIES += libpcap ++endif ++ ++ifeq ($(BR2_SHARED_LIBS),y) ++define DPDK_ENABLE_SHARED_LIBS ++ $(call KCONFIG_ENABLE_OPT,CONFIG_RTE_BUILD_SHARED_LIB,\ ++ $(@D)/build/.config) ++endef ++ ++DPDK_POST_CONFIGURE_HOOKS += DPDK_ENABLE_SHARED_LIBS ++endif ++ ++# We're building a kernel module without using the kernel-module infra, ++# so we need to tell we want module support in the kernel ++ifeq ($(BR2_PACKAGE_DPDK),y) ++LINUX_NEEDS_MODULES = y ++endif ++ ++DPDK_CONFIG = $(call qstrip,$(BR2_PACKAGE_DPDK_CONFIG)) ++ ++ifeq ($(BR2_PACKAGE_DPDK_EXAMPLES),y) ++# Build of DPDK examples is not very straight-forward. It requires to have ++# the SDK and runtime installed on same place to reference it by RTE_SDK. ++# We place it locally in the build directory. ++# In additition, some examples seem to have a dependency on the ethtool ++# example that may not be met when building in parallel for the first ++# time. As a (dirty) workaround, we build twice. ++define DPDK_BUILD_EXAMPLES ++ $(MAKE) -C $(@D) DESTDIR=$(@D)/examples-sdk \ ++ CROSS=$(TARGET_CROSS) install-sdk install-runtime ++ $(MAKE) -C $(@D) RTE_KERNELDIR=$(LINUX_DIR) CROSS=$(TARGET_CROSS) \ ++ RTE_SDK=$(@D)/examples-sdk/usr/local/share/dpdk \ ++ T=$(DPDK_CONFIG) examples || echo "Failed, building again" ++ $(MAKE) -C $(@D) RTE_KERNELDIR=$(LINUX_DIR) CROSS=$(TARGET_CROSS) \ ++ RTE_SDK=$(@D)/examples-sdk/usr/local/share/dpdk \ ++ T=$(DPDK_CONFIG) examples ++endef ++ ++DPDK_EXAMPLES_PATH = $(@D)/examples-sdk/usr/local/share/dpdk/examples ++ ++# Installation of examples is not supported in DPDK so we do it explicitly ++# here. As the binaries and libraries do not have a single or regular location ++# where to find them after build, we search for them by find. ++define DPDK_INSTALL_EXAMPLES ++ $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/local/bin ++ $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/local/lib ++ for f in `find $(DPDK_EXAMPLES_PATH) -executable -type f \ ++ -name '[a-z]*.so*' | grep '\/lib\/.*'`; do \ ++ $(INSTALL) -m 0755 -D $$f \ ++ $(TARGET_DIR)/usr/local/lib/`basename $$f`;\ ++ done ++ for f in `find $(DPDK_EXAMPLES_PATH) -executable -type f \ ++ ! -name '*.so*' | grep '\/app\/.*'`; do \ ++ $(INSTALL) -m 0755 -D $$f \ ++ $(TARGET_DIR)/usr/local/bin/`basename $$f`;\ ++ done ++endef ++ ++define DPDK_INSTALL_KMOD ++ $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/local/kmod ++ for f in `find $(@D)/build/kmod -name '*.ko'` ; do \ ++ $(INSTALL) -m 0755 -D $$f \ ++ $(TARGET_DIR)/usr/local/kmod/`basename $$f`; \ ++ done ++endef ++ ++# Build of the power example is broken (at least for 16.04). ++define DPDK_DISABLE_POWER ++ $(call KCONFIG_DISABLE_OPT,CONFIG_RTE_LIBRTE_POWER,\ ++ $(@D)/build/.config) ++endef ++ ++DPDK_POST_CONFIGURE_HOOKS += DPDK_DISABLE_POWER ++endif ++ ++define DPDK_CONFIGURE_CMDS ++ $(MAKE) -C $(@D) T=$(DPDK_CONFIG) RTE_KERNELDIR=$(LINUX_DIR) \ ++ CROSS=$(TARGET_CROSS) config ++endef ++ ++define DPDK_BUILD_CMDS ++ $(TARGET_MAKE_ENV) LDFLAGS="$(TARGET_LDFLAGS)" $(MAKE) \ ++ DBM_INCLUDE="$(STAGING_DIR)/usr/include" \ ++ CCOPTS="$(TARGET_CFLAGS) -D_GNU_SOURCE" \ ++ SHARED_LIBS="$(if $(BR2_STATIC_LIBS),n,y)" -C $(@D) \ ++ RTE_KERNELDIR=$(LINUX_DIR) CROSS=$(TARGET_CROSS) ++ $(DPDK_BUILD_EXAMPLES) ++endef ++ ++define DPDK_INSTALL_STAGING_CMDS ++ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) prefix=/usr \ ++ CROSS=$(TARGET_CROSS) install-sdk ++endef ++ ++ifeq ($(BR2_PACKAGE_DPDK_TEST),y) ++define DPDK_INSTALL_TARGET_TEST ++ $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/dpdk ++ $(INSTALL) -m 0755 -D $(@D)/build/app/test $(TARGET_DIR)/usr/dpdk ++ $(INSTALL) -m 0755 -D $(@D)/app/test/*.py $(TARGET_DIR)/usr/dpdk ++endef ++endif ++ ++define DPDK_INSTALL_TARGET_CMDS ++ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) prefix=/usr \ ++ CROSS=$(TARGET_CROSS) install-runtime ++ $(DPDK_INSTALL_KMOD) ++ $(DPDK_INSTALL_TARGET_TEST) ++ $(DPDK_INSTALL_EXAMPLES) ++endef ++ ++$(eval $(generic-package)) |