1 files changed, 212 insertions, 0 deletions
diff --git a/resources/tools/disk-image-builder/ubuntu/run-listmaker.sh b/resources/tools/disk-image-builder/ubuntu/run-listmaker.sh
new file mode 100755
index 0000000000..1f476566af
--- /dev/null
+++ b/resources/tools/disk-image-builder/ubuntu/run-listmaker.sh
@@ -0,0 +1,212 @@
+#!/bin/bash
+
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This script is to spin up a simulation in VIRL, and fetch the URLs for all packages
+# that the user would obtain if they did an "apt-get update", "apt-get upgrade" today.
+#
+# This entire step is neither secure nor portable. The assumption --for now-- is that
+# this will only ever be run in LF CSIT VIRL lab. Should the requirement arise to
+# run this elsewhere, then additional work may be required to make this more
+# portable.
+
+# This script requires that the following two environment variables be defined-
+#
+# $VIRL_USER
+# $VIRL_PASSWORD
+
+VERSION=$(cat $(dirname $0)/CHANGELOG  | grep '^## ' | head -1 | sed -e 's/.*\[\(.*\)\].*/\1/')
+if [ "${VERSION}" = "" ]
+then
+  echo "Unable to determine build version from CHANGELOG file. Make sure"
+  echo "that there is an entry for the most recent version in CHANGELOG,"
+  echo "and that the entry is formated like"
+  echo
+  echo "## [1.0] - 2016-05-20"
+  exit 1
+fi
+DATE=$(date +%Y-%m-%d)
+OS="ubuntu-14.04.4"
+RELEASE="${OS}_${DATE}_${VERSION}"
+OUTPUT_DIR="lists/${RELEASE}"
+
+echo "Building release ${RELEASE}."
+echo "Storinging data in ${OUTPUT_DIR}/."
+
+
+# APT packages wanted
+
+APT_WANTLIST_INFRA="nfs-common cloud-init"
+APT_WANTLIST_CSIT="python-dev python-virtualenv git"
+APT_WANTLIST_VPP="dkms"
+APT_WANTLIST_TREX="zlib1g-dev unzip"
+APT_WANTLIST_NESTED="qemu-system-x86"
+
+# For now, let us NOT incude WANTLIST_NESTED in the below. We're installing qemu
+# separately from a separate source.
+APT_WANTLIST="$APT_WANTLIST_INFRA $APT_WANTLIST_CSIT $APT_WANTLIST_VPP $WANTLIST_TREX"
+
+APT_OUTPUTFILE="${OUTPUT_DIR}/apt-packages.txt"
+
+# Python requirements file. Can point to a manually crafted file
+# here, or to the actual CSIT requirements file, or to a symlink.
+
+PIP_REQUIREMENTS="../../../../requirements.txt"
+if [ ! -f ${PIP_REQUIREMENTS} ]
+then
+  echo "PIP requirements file ${PIP_REQUIREMENTS} not found."
+  exit 1
+fi
+
+PIP_OUTPUTFILE="${OUTPUT_DIR}/pip-requirements.txt"
+
+# These will be used for SSH to the listmaker VM, and must match with what
+# was defined in the listmaker VM's kickstart file.
+SSH_USER="root"
+SSH_PASS="csit"
+
+VIRL_TOPOLOGY_FILE="listmaker/virl-listmaker.yaml"
+
+###
+### Spin up simulation
+###
+if [ "$VIRL_USER" = "" ] || [ "$VIRL_PASSWORD" = "" ]
+then
+  echo '$VIRL_USER and $VIRL_PASSWORD environment variables must be defined'
+  exit 1
+fi
+
+output=$(virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} \
+  simengine-launch -f ${VIRL_TOPOLOGY_FILE} 2>&1)
+id=$(echo "${output}" | grep "Simulation ID is " | cut -f 4 -d ' ')
+
+if [ "$id" = "" ]
+then
+  echo "Did not get a simulation ID. Aborting."
+  echo "Output was:"
+  echo "${output}"
+  exit 1
+fi
+
+echo My ID is ${id}
+function stop_sim {
+  virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-stop --session ${id}
+}
+trap stop_sim EXIT
+
+ip="None"
+while [ "${ip}" = "None" ] || [ "${ip}" = "" ]
+do
+  sleep 5
+  output=$(virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-interfaces --session ${id} --nodes listmaker --interfaces management 2>&1)
+  ip=$(echo "${output}" | grep "u'ip-address" | cut -f 4 -d "'" | cut -f 1 -d '/')
+done
+echo "IP is $ip"
+
+sleep 10
+
+if ping -w 60 -c 2 $ip > /dev/null
+then
+  echo Host $ip alive
+else
+  echo Host $ip failed to respond to ping
+  exit 1
+fi
+
+# Wait for SSH to be up
+while ! nc -z $ip 22
+do
+  sleep 3
+done
+
+mkdir -p $OUTPUT_DIR
+
+###
+### SSH to the VM and perform package installation. Before each step,
+### dry-run and grab the URLs of the packages that would be installed.
+###
+
+function do_ssh {
+  # Helper function: SSH and avoid password prompt
+  sshpass -p $SSH_PASS ssh -o StrictHostKeyChecking=false -o UserKnownHostsFile=/dev/null \
+    -o LogLevel=error ${SSH_USER}@${ip} "$@"
+}
+
+do_ssh "cat - > /etc/apt/sources.list" <<_EOF
+deb http://us.archive.ubuntu.com/ubuntu/ trusty main restricted
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty main restricted
+deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted
+deb http://us.archive.ubuntu.com/ubuntu/ trusty universe
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty universe
+deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates universe
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates universe
+deb http://us.archive.ubuntu.com/ubuntu/ trusty multiverse
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty multiverse
+deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse
+deb http://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
+deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse
+deb http://security.ubuntu.com/ubuntu trusty-security main restricted
+deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted
+deb http://security.ubuntu.com/ubuntu trusty-security universe
+deb-src http://security.ubuntu.com/ubuntu trusty-security universe
+deb http://security.ubuntu.com/ubuntu trusty-security multiverse
+deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse
+_EOF
+
+
+### FIXME: Need error handling around all this
+do_ssh apt-get update
+
+APT_TEMPFILE=$(mktemp)
+do_ssh apt-get --print-uris -y dist-upgrade >> $APT_TEMPFILE
+do_ssh DEBIAN_FRONTEND=noninteractive apt-get -y dist-upgrade
+do_ssh apt-get --print-uris -y install $APT_WANTLIST >> $APT_TEMPFILE
+do_ssh DEBIAN_FRONTEND=noninteractive apt-get -y install $APT_WANTLIST
+
+### Install qemu ($APT_WANTLIST_NESTED) separately from PPA
+do_ssh "cat - >> /etc/apt/sources.list" <<_EOF
+# For a custom qemu build
+deb http://ppa.launchpad.net/syseleven-platform/virtualization/ubuntu trusty main
+deb-src http://ppa.launchpad.net/syseleven-platform/virtualization/ubuntu trusty main
+_EOF
+do_ssh apt-get --allow-unauthenticated update
+do_ssh apt-get --print-uris --allow-unauthenticated -y install $APT_WANTLIST_NESTED >> $APT_TEMPFILE
+do_ssh DEBIAN_FRONTEND=noninteractive apt-get --allow-unauthenticated -y install $APT_WANTLIST_NESTED
+
+cat $APT_TEMPFILE | grep MD5Sum | sort > $APT_OUTPUTFILE
+rm -f $APT_TEMPFILE
+
+### Get Python data. We do this by installing as per our
+### requirements.txt file while fetching a list of all
+### installed modules before and after, and then comparing.
+
+PIP_TEMPFILE_BEFORE=$(mktemp)
+PIP_TEMPFILE_AFTER=$(mktemp)
+do_ssh "cat - > /tmp/requirements.txt" < ${PIP_REQUIREMENTS}
+do_ssh pip list | sort > $PIP_TEMPFILE_BEFORE
+do_ssh pip install -r /tmp/requirements.txt
+do_ssh pip list | sort > $PIP_TEMPFILE_AFTER
+
+comm -1 -3 ${PIP_TEMPFILE_BEFORE} ${PIP_TEMPFILE_AFTER} | \
+  sed -e 's/\(.*\) (\(.*\))/\1==\2/' > $PIP_OUTPUTFILE
+rm -f $PIP_TEMPFILE_BEFORE
+rm -f $PIP_TEMPFILE_AFTER
+
+###
+### Stop VIRL session
+###
+virl_std_client -u ${VIRL_USER} -p ${VIRL_PASSWORD} simengine-stop --session ${id}
+trap "" EXIT