aboutsummaryrefslogtreecommitdiffstats
path: root/resources/tools/presentation/new/doc/pal_lld.rst
diff options
context:
space:
mode:
Diffstat (limited to 'resources/tools/presentation/new/doc/pal_lld.rst')
-rw-r--r--resources/tools/presentation/new/doc/pal_lld.rst164
1 files changed, 130 insertions, 34 deletions
diff --git a/resources/tools/presentation/new/doc/pal_lld.rst b/resources/tools/presentation/new/doc/pal_lld.rst
index 81c2547a82..c037f97522 100644
--- a/resources/tools/presentation/new/doc/pal_lld.rst
+++ b/resources/tools/presentation/new/doc/pal_lld.rst
@@ -1391,7 +1391,8 @@ measurement data. PA is defined as follows:
#. Parse out the data filtering test cases listed in PA specification
(part of CSIT PAL specification file).
- #. Calculate trend metrics for the rolling window of <N> sets of historical data:
+ #. Calculate trend metrics for the rolling window of <N> sets of historical
+ data:
#. Calculate quartiles Q1, Q2, Q3.
#. Trim outliers using IQR.
@@ -1423,19 +1424,28 @@ measurement data. PA is defined as follows:
Parameters to specify:
``````````````````````
-- job to be monitored - the Jenkins job which results are used as input data for
- this test;
-- builds used for trending plot(s) - specified by a list of build numbers or by
- a range of builds defined by the first and the last buld number;
-- list plots to generate:
+*General section - parameters common to all plots:*
- - plot title;
- - output file name;
- - data for plots;
- - tests to be displayed in the plot defined by a filter;
- - list of parameters to extract from the data;
- - periods (daily = 1, weekly = 5, monthly = 30);
- - plot layout
+ - type: "cpta";
+ - title: The title of this section;
+ - output-file-type: only ".html" is supported;
+ - output-file: path where the generated files will be stored.
+
+*Plots section:*
+
+ - plot title;
+ - output file name;
+ - input data for plots;
+
+ - job to be monitored - the Jenkins job which results are used as input
+ data for this test;
+ - builds used for trending plot(s) - specified by a list of build
+ numbers or by a range of builds defined by the first and the last
+ build number;
+
+ - tests to be displayed in the plot defined by a filter;
+ - list of parameters to extract from the data;
+ - plot layout
*Example:*
@@ -1444,36 +1454,122 @@ Parameters to specify:
-
type: "cpta"
title: "Continuous Performance Trending and Analysis"
- algorithm: "cpta"
output-file-type: ".html"
output-file: "{DIR[STATIC,VPP]}/cpta"
- data: "plot-performance-trending"
plots:
- - title: "VPP 1T1C L2 64B Packet Throughput - {period} Trending"
+
+ - title: "VPP 1T1C L2 64B Packet Throughput - Trending"
output-file-name: "l2-1t1c-x520"
- data: "plot-performance-trending"
+ data: "plot-performance-trending-vpp"
filter: "'NIC_Intel-X520-DA2' and 'MRR' and '64B' and ('BASE' or 'SCALE') and '1T1C' and ('L2BDMACSTAT' or 'L2BDMACLRN' or 'L2XCFWD') and not 'VHOST' and not 'MEMIF'"
parameters:
- "result"
- # - "name"
- periods:
- - 1
- - 5
- - 30
- layout: "plot-cpta"
-
- - title: "VPP 2T2C L2 64B Packet Throughput - {period} Trending"
- output-file-name: "l2-2t2c-x520"
- data: "plot-performance-trending"
- filter: "'NIC_Intel-X520-DA2' and 'MRR' and '64B' and ('BASE' or 'SCALE') and '2T2C' and ('L2BDMACSTAT' or 'L2BDMACLRN' or 'L2XCFWD') and not 'VHOST' and not 'MEMIF'"
+ layout: "plot-cpta-vpp"
+
+ - title: "DPDK 4T4C IMIX MRR Trending"
+ output-file-name: "dpdk-imix-4t4c-xl710"
+ data: "plot-performance-trending-dpdk"
+ filter: "'NIC_Intel-XL710' and 'IMIX' and 'MRR' and '4T4C' and 'DPDK'"
parameters:
- "result"
- # - "name"
- periods:
- - 1
- - 5
- - 30
- layout: "plot-cpta"
+ layout: "plot-cpta-dpdk"
+
+The Dashboard
+`````````````
+
+Performance dashboard tables provide the latest VPP throughput trend, trend
+compliance and detected anomalies, all on a per VPP test case basis.
+The Dashboard is generated as three tables for 1t1c, 2t2c and 4t4c MRR tests.
+
+At first, the .csv tables are generated (only the table for 1t1c is shown):
+
+::
+
+ -
+ type: "table"
+ title: "Performance trending dashboard"
+ algorithm: "table_performance_trending_dashboard"
+ output-file-ext: ".csv"
+ output-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-1t1c"
+ data: "plot-performance-trending-all"
+ filter: "'MRR' and '1T1C'"
+ parameters:
+ - "name"
+ - "parent"
+ - "result"
+ ignore-list:
+ - "tests.vpp.perf.l2.10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.tc01-64b-1t1c-eth-l2bdscale1mmaclrn-ndrdisc"
+ outlier-const: 1.5
+ window: 14
+ evaluated-window: 14
+ long-trend-window: 180
+
+Then, html tables stored inside .rst files are generated:
+
+::
+
+ -
+ type: "table"
+ title: "HTML performance trending dashboard 1t1c"
+ algorithm: "table_performance_trending_dashboard_html"
+ input-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-1t1c.csv"
+ output-file: "{DIR[STATIC,VPP]}/performance-trending-dashboard-1t1c.rst"
+
+Root Cause Analysis
+-------------------
+
+Root Cause Analysis (RCA) by analysing archived performance results – re-analyse
+available data for specified:
+
+ - range of jobs builds,
+ - set of specific tests and
+ - PASS/FAIL criteria to detect performance change.
+
+In addition, PAL generates trending plots to show performance over the specified
+time interval.
+
+Root Cause Analysis - Option 1: Analysing Archived VPP Results
+``````````````````````````````````````````````````````````````
+
+It can be used to speed-up the process, or when the existing data is sufficient.
+In this case, PAL uses existing data saved in Nexus, searches for performance
+degradations and generates plots to show performance over the specified time
+interval for the selected tests.
+
+Execution Sequence
+''''''''''''''''''
+
+ #. Download and parse archived historical data and the new data.
+ #. Calculate trend metrics.
+ #. Find regression / progression.
+ #. Generate and publish results:
+
+ #. Summary graphs to include measured values with Progression and
+ Regression markers.
+ #. List the DUT build(s) where the anomalies were detected.
+
+CSIT PAL Specification
+''''''''''''''''''''''
+
+ - What to test:
+
+ - first build (Good); specified by the Jenkins job name and the build
+ number
+ - last build (Bad); specified by the Jenkins job name and the build
+ number
+ - step (1..n).
+
+ - Data:
+
+ - tests of interest; list of tests (full name is used) which results are
+ used
+
+*Example:*
+
+::
+
+ TODO
+
API
---