diff options
Diffstat (limited to 'resources/tools/testbed-setup/README.md')
| -rw-r--r-- | resources/tools/testbed-setup/README.md | 39 |
1 files changed, 12 insertions, 27 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md index 720ba0f989..e97fa22dfb 100644 --- a/resources/tools/testbed-setup/README.md +++ b/resources/tools/testbed-setup/README.md @@ -80,12 +80,14 @@ is available on the PXE bootstrap server in ~testuser/host-setup. - set CIMC address - set CIMC username, password and hostname +- set IPMI address +- set IPMI username, password and hostname ### Bootstrap the host -From PXE boostrap server: +Optional: From PXE boostrap server in case of installing Haswell - - `cd ~testuser/host-setup/cimc` + - `cd resources/tools/testbed-setup/cimc` - Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i` - Adjust BIOS settings @@ -94,7 +96,7 @@ From PXE boostrap server: - Reboot server with boot from PXE (restart immediately) - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe` -While Ubuntu install is running: +Optional: If RAID is not created on Haswells. Execute while Ubuntu install is running - create RAID array. Reboot if needed. - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe` @@ -104,35 +106,18 @@ While Ubuntu install is running: - Set the next boot from HDD (without restart) - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd` -When installation is finished: - - - `ssh-copy-id 10.30.51.x` - - `cd ~testuser/host-setup/playbooks` - - edit /etc/ansible/hosts; add the hosts you are installing. *REMOVE ANY HOSTS YOU ARE NOT CURRENTLY INSTALLING*. - - Example for physical testbed hosts: - ~~~ - [tg] - 10.30.51.24 hostname=t3-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7 - - [sut] - 10.30.51.25 hostname=t3-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7 - 10.30.51.26 hostname=t3-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7 - ~~~ +Optional: If installing Skylake machine, connect to IPMI and boot from PXE via F12 - Example for VIRL hosts -- use the "virl" tag and specify the flat network start and end addresses: - - ~~~ - [virl] - 10.30.51.28 hostname=t4-virl1 virl_l2_start=10.30.52.2 virl_l2_end=10.30.52.253 virl_l2_network=10.30.52.0/24 virl_l2_ip=10.30.52.254 virl_public_port=eth0 - ~~~ +When installation is finished: - - `ansible-playbook --ask-sudo-pass 01-host-setup.yaml` - - `ansible-playbook reboot.yaml` + - Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x` + - Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit` + - Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible` + - Edit production file and uncomment servers that are supposed to be installed: `ansible-playbook --ask-become-pass --inventory production site.yaml --list-hosts` + - Run ansible on selected hosts: `ansible-playbook --ask-become-pass --inventory production site.yaml` For non-VIRL hosts, stop here. - ### VIRL installation After the host has rebooted: |