diff options
Diffstat (limited to 'resources/tools/testbed-setup/README.md')
| -rw-r--r-- | resources/tools/testbed-setup/README.md | 37 |
1 files changed, 18 insertions, 19 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md index ad9b400126..b4f376b96e 100644 --- a/resources/tools/testbed-setup/README.md +++ b/resources/tools/testbed-setup/README.md @@ -32,9 +32,6 @@ is available on the PXE bootstrap server in ~testuser/host-setup. - `sudo service isc-dhcp-server restart` - `cd ~testuser/host-setup` - `sudo mkdir /mnt/cdrom` - - Ubuntu Xenial - - `wget 'http://releases.ubuntu.com/16.04.2/ubuntu-16.04.2-server-amd64.iso'` - - `sudo mount -o loop ubuntu-16.04.2-server-amd64.iso /mnt/cdrom/` - Ubuntu Bionic - `wget 'http://cdimage.ubuntu.com/ubuntu/releases/18.04/release/ubuntu-18.04-server-amd64.iso'` - `sudo mount -o loop ubuntu-18.04-server-amd64.iso /mnt/cdrom/` @@ -65,31 +62,31 @@ is available on the PXE bootstrap server in ~testuser/host-setup. ### Bootstrap the host -Optional: From PXE boostrap server in case of installing Haswell +Convenient way to re-stage host via script: + + `sudo ./bootstrap_setup_testbed.sh <linux_ip> <mgmt_ip> <username> <pass>` + +Optional: CIMC - From PXE boostrap server - - `cd resources/tools/testbed-setup/cimc` - Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i` - Adjust BIOS settings - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />'` - - add MAC address to DHCP (/etc/dhcp/dhcpd.conf) - - Reboot server with boot from PXE (restart immediately) - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe` - -Optional: If RAID is not created on Haswells. Execute while Ubuntu install is running - - - create RAID array. Reboot if needed. + - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf) + - If RAID is not created in CIMC. Create RAID array. Reboot. - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe` - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]'` Alternatively, create the RAID array manually. - - - Set the next boot from HDD (without restart) + - Reboot server with boot from PXE (restart immediately) + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe` + - Set the next boot from HDD (without restart) Execute while Ubuntu install is running. - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd` -Optional: If installing Skylake machine +Optional: IPMI - From PXE boostrap server - Get MAC address of LAN0 - `ipmitool -U ADMIN -H $HOST_ADDRESS raw 0x30 0x21 | tail -c 18` + - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf) - Reboot into PXE for next boot only - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN chassis bootdev pxe` - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN power reset` @@ -97,14 +94,15 @@ Optional: If installing Skylake machine - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol activate` - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol deactivate` - When installation is finished: - Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x` - Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit` - Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible` - - Edit production file and uncomment servers that are supposed to be installed: `ansible-playbook --ask-become-pass --inventory production site.yaml --list-hosts` - - Run ansible on selected hosts: `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml` + - Edit production file and uncomment servers that are supposed to be + installed. + - Run ansible on selected hosts: + `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml` For non-VIRL hosts, stop here. @@ -158,4 +156,5 @@ Back on the PXE bootstrap server: `ansible-playbook 04-disk-image.yaml` -The VIRL host should now be operational. Test, and when ready, create a ~jenkins-in/status file with the appropriate status. +The VIRL host should now be operational. Test, and when ready, create a +~jenkins-in/status file with the appropriate status. |