aboutsummaryrefslogtreecommitdiffstats
path: root/resources/tools/testbed-setup/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'resources/tools/testbed-setup/README.md')
-rw-r--r--resources/tools/testbed-setup/README.md39
1 files changed, 12 insertions, 27 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md
index 720ba0f989..e97fa22dfb 100644
--- a/resources/tools/testbed-setup/README.md
+++ b/resources/tools/testbed-setup/README.md
@@ -80,12 +80,14 @@ is available on the PXE bootstrap server in ~testuser/host-setup.
- set CIMC address
- set CIMC username, password and hostname
+- set IPMI address
+- set IPMI username, password and hostname
### Bootstrap the host
-From PXE boostrap server:
+Optional: From PXE boostrap server in case of installing Haswell
- - `cd ~testuser/host-setup/cimc`
+ - `cd resources/tools/testbed-setup/cimc`
- Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i`
- Adjust BIOS settings
@@ -94,7 +96,7 @@ From PXE boostrap server:
- Reboot server with boot from PXE (restart immediately)
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe`
-While Ubuntu install is running:
+Optional: If RAID is not created on Haswells. Execute while Ubuntu install is running
- create RAID array. Reboot if needed.
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe`
@@ -104,35 +106,18 @@ While Ubuntu install is running:
- Set the next boot from HDD (without restart)
- `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd`
-When installation is finished:
-
- - `ssh-copy-id 10.30.51.x`
- - `cd ~testuser/host-setup/playbooks`
- - edit /etc/ansible/hosts; add the hosts you are installing. *REMOVE ANY HOSTS YOU ARE NOT CURRENTLY INSTALLING*.
-
- Example for physical testbed hosts:
- ~~~
- [tg]
- 10.30.51.24 hostname=t3-tg1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
-
- [sut]
- 10.30.51.25 hostname=t3-sut1 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
- 10.30.51.26 hostname=t3-sut2 isolcpus="1-17,19-35" ansible_python_interpreter=/usr/bin/python2.7
- ~~~
+Optional: If installing Skylake machine, connect to IPMI and boot from PXE via F12
- Example for VIRL hosts -- use the "virl" tag and specify the flat network start and end addresses:
-
- ~~~
- [virl]
- 10.30.51.28 hostname=t4-virl1 virl_l2_start=10.30.52.2 virl_l2_end=10.30.52.253 virl_l2_network=10.30.52.0/24 virl_l2_ip=10.30.52.254 virl_public_port=eth0
- ~~~
+When installation is finished:
- - `ansible-playbook --ask-sudo-pass 01-host-setup.yaml`
- - `ansible-playbook reboot.yaml`
+ - Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x`
+ - Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit`
+ - Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible`
+ - Edit production file and uncomment servers that are supposed to be installed: `ansible-playbook --ask-become-pass --inventory production site.yaml --list-hosts`
+ - Run ansible on selected hosts: `ansible-playbook --ask-become-pass --inventory production site.yaml`
For non-VIRL hosts, stop here.
-
### VIRL installation
After the host has rebooted: