diff options
Diffstat (limited to 'resources/tools/testbed-setup/ansible/roles/cobbler/files/var/lib/cobbler/kickstarts/ubuntu-18.04.2-server-x86_64.seed')
-rw-r--r-- | resources/tools/testbed-setup/ansible/roles/cobbler/files/var/lib/cobbler/kickstarts/ubuntu-18.04.2-server-x86_64.seed | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/resources/tools/testbed-setup/ansible/roles/cobbler/files/var/lib/cobbler/kickstarts/ubuntu-18.04.2-server-x86_64.seed b/resources/tools/testbed-setup/ansible/roles/cobbler/files/var/lib/cobbler/kickstarts/ubuntu-18.04.2-server-x86_64.seed new file mode 100644 index 0000000000..250701232c --- /dev/null +++ b/resources/tools/testbed-setup/ansible/roles/cobbler/files/var/lib/cobbler/kickstarts/ubuntu-18.04.2-server-x86_64.seed @@ -0,0 +1,137 @@ +#### Contents of the preconfiguration file (for Ubuntu 18.04 Server LTS) + +### Localization +# Locale sets language and country. +d-i debian-installer/locale string en_US +d-i pkgsel/install-language-support boolean false +# Keyboard selection. +# Disable automatic (interactive) keymap detection. +d-i console-setup/ask_detect boolean false +d-i console-setup/layoutcode string us + +### Network configuration +# netcfg will choose an interface that has link if possible. This makes it +# skip displaying a list if there is more than one interface. +d-i netcfg/choose_interface select auto +# If you have a slow dhcp server and the installer times out waiting for +# it, this might be useful. +d-i netcfg/dhcp_timeout string 60 +# If you prefer to configure the network manually, uncomment this line and +# the static network configuration below. +#d-i netcfg/disable_dhcp boolean true +# If you want the preconfiguration file to work on systems both with and +# without a dhcp server, uncomment these lines and the static network +# configuration below. +d-i netcfg/dhcp_failed note +#d-i netcfg/dhcp_options select Configure network manually +# Static network configuration. +#d-i netcfg/get_nameservers string 172.30.0.2 +#d-i netcfg/get_ipaddress string 172.30.15.42 +#d-i netcfg/get_netmask string 255.255.0.0 +#d-i netcfg/get_gateway string 172.30.0.1 +#d-i netcfg/confirm_static boolean true +# Any hostname and domain names assigned from dhcp take precedence over +# values set here. However, setting the values still prevents the questions +# from being shown, even if values come from dhcp. +d-i netcfg/get_hostname string unassigned-hostname +d-i netcfg/get_domain string unassigned-domain +# Disable WEP key dialog. +d-i netcfg/wireless_wep string +# Alternatively: by default, the installer uses CC.archive.ubuntu.com where +# CC is the ISO-3166-2 code for the selected country. You can preseed this +# so that it does so without asking. +d-i mirror/http/mirror select us.archive.ubuntu.com + +### Mirror settings +d-i live-installer/net-image string http://$http_server/cobbler/links/$distro_name/install/filesystem.squashfs + +### Clock and time zone setup +# Controls whether or not the hardware clock is set to UTC. +d-i clock-setup/utc boolean true +# You may set this to any valid setting for $TZ; see the contents of +# /usr/share/zoneinfo/ for valid values. +d-i time/zone string America/Los_Angeles +# Controls whether to use NTP to set the clock during the install +d-i clock-setup/ntp boolean false + +### Partitioning +## If the system has free space you can choose to only partition that space. +# Alternatives: custom, some_device, some_device_crypto, some_device_lvm. +d-i partman-auto/init_automatically_partition select some_device +# Alternatively, you can specify a disk to partition. The device name must +# be given in traditional non-devfs format. +d-i partman-auto/disk string /dev/sda +# In addition, you'll need to specify the method to use. +# The presently available methods are: "regular", "lvm" and "crypto" +d-i partman-auto/method string regular +# If one of the disks that are going to be automatically partitioned +# contains an old LVM configuration, the user will normally receive a +# warning. This can be preseeded away... +d-i partman-lvm/device_remove_lvm boolean true +# The same applies to pre-existing software RAID array: +d-i partman-md/device_remove_md boolean true +# And the same goes for the confirmation to write the lvm partitions. +d-i partman-lvm/confirm boolean true +# You can choose one of the three predefined partitioning recipes: +# - atomic: all files in one partition +# - home: separate /home partition +# - multi: separate /home, /usr, /var, and /tmp partitions +d-i partman-auto/choose_recipe select atomic +# If you just want to change the default filesystem from ext3 to something +# else, you can do that without providing a full recipe. +d-i partman/default_filesystem string ext4 +# This makes partman automatically partition without confirmation, provided +# that you told it what to do using one of the methods above. +d-i partman/confirm_write_new_label boolean true +d-i partman/choose_partition select finish +d-i partman/confirm boolean true +d-i partman/confirm_nooverwrite boolean true + +### Account setup +# Skip creation of a root account (normal user account will be able to +# use sudo). The default is false; preseed this to true if you want to set +# a root password. +d-i passwd/root-login boolean false +# Root password, either in clear text +#d-i passwd/root-password password pass +#d-i passwd/root-password-again password pass +# or encrypted using an MD5 hash. +#d-i passwd/root-password-crypted password f4f1d7b6738330f521de21da3f563bce +# To create a normal user account. +d-i passwd/user-fullname string testuser +d-i passwd/username string testuser +# Normal user's password, either in clear text +d-i passwd/user-password password Csit1234 +d-i passwd/user-password-again password Csit1234 +# or encrypted using an MD5 hash. +#d-i passwd/user-password-crypted password f4f1d7b6738330f521de21da3f563bce +# The installer will warn about weak passwords. If you are sure you know +# what you're doing and want to override it, uncomment this. +d-i user-setup/allow-password-weak boolean true +# Set to true if you want to encrypt the first user's home directory. +d-i user-setup/encrypt-home boolean false + +### Package selection +tasksel tasksel/first multiselect ubuntu-server +# Individual additional packages to install +d-i pkgsel/include string openssh-server python2.7 +# Whether to upgrade packages after debootstrap. +# Allowed values: none, safe-upgrade, full-upgrade +#d-i pkgsel/upgrade select none +# Policy for applying updates. May be "none" (no automatic updates), +# "unattended-upgrades" (install security updates automatically), or +# "landscape" (manage system with Landscape). +d-i pkgsel/update-policy select none + +### Boot loader installation +d-i grub-installer/bootdev string default +# This is fairly safe to set, it makes grub install automatically to the MBR +# if no other operating system is detected on the machine. +d-i grub-installer/only_debian boolean false +# This one makes grub-installer install to the MBR if it also finds some other +# OS, which is less safe as it might not be able to boot that other OS. +d-i grub-installer/with_other_os boolean false + +### Finishing up the installation +# Avoid that last message about the install being complete. +d-i finish-install/reboot_in_progress note |