diff options
Diffstat (limited to 'resources/tools/testbed-setup/playbooks')
31 files changed, 0 insertions, 861 deletions
diff --git a/resources/tools/testbed-setup/playbooks/01-host-setup.yaml b/resources/tools/testbed-setup/playbooks/01-host-setup.yaml deleted file mode 100644 index 90a5ad7899..0000000000 --- a/resources/tools/testbed-setup/playbooks/01-host-setup.yaml +++ /dev/null @@ -1,181 +0,0 @@ ---- -- hosts: all - remote_user: testuser - sudo: yes - tasks: - - name: copy sudoers file - copy: src=files/sudoers dest=/etc/sudoers.d/testuser owner=root group=root mode=660 - - name: copy hosts file - template: src=files/hosts dest=/etc/hosts owner=root group=root mode=644 - - name: copy hostname file - template: src=files/hostname dest=/etc/hostname owner=root group=root mode=644 - - name: copy grub file - template: src=files/grub dest=/etc/default/grub owner=root group=root mode=644 - - name: update grub - command: update-grub - - name: copy apt sources file - template: src=files/apt-sources.list dest=/etc/apt/sources.list - - name: install python-apt - raw: apt-get update && apt-get install python-apt -y -q - - name: update repositories - apt: update_cache=yes - - name: install git - apt: name=git state=present - - name: install crudini - apt: name=crudini state=present - - name: install expect - apt: name=expect state=present - - name: install socat - apt: name=socat state=present - - name: install qemu - apt: name=qemu-system-x86 state=present - - name: Install packages to allow apt to use a repository over HTTPS - apt: name=apt-transport-https state=present -- hosts: virl - remote_user: testuser - sudo: yes - tasks: - - name: interfaces file - template: src=files/interfaces_virl dest=/etc/network/interfaces owner=root group=root mode=644 - - name: Add VIRL user - user: name=virl shell=/bin/bash comment="VIRL user" password="$6$mJPlK5FKLar6$xxXPP0LRhC7T1yhHtym18Z3nKZweTtfTxzi1WpvVHJ0U/Em1UWcHqfMhRApFp0rsY9jHRuL6FfeFbKPN..uDK." - - name: Add VIRL user to sudoers - copy: src=files/sudoers_virl dest=/etc/sudoers.d/virl owner=root group=root mode=660 - - name: Add post up for additional address - copy: src=files/ifup dest=/etc/network/if-up.d/virl owner=root group=root mode=755 - - name: Set VIRL user authorized key - authorized_key: user=virl key="{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" - - name: install bridge-utils - apt: name=bridge-utils state=present - - name: Old interface naming - command: ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules - - name: update init for old interface naming - command: update-initramfs -u - - name: QEMU log garbage collector - cron: minute="0" hour="0" - name="QEMU log garbage collector" - job="find /var/log/libvirt/qemu -type f -mtime +14 -name 'instance*.log' -delete" - - name: VPP deb package garbage collector - cron: minute="0" hour="0" - name="VPP deb package garbage collector" - job="find /tmp -type f -atime +14 -name '*.deb' -delete" - - name: VPP rpm package garbage collector - cron: minute="0" hour="0" - name="VPP rpm package garbage collector" - job="find /tmp -type f -atime +14 -name '*.rpm' -delete" - - name: NFS scratch dir garbage collector - cron: minute="0" hour="0" - name="NFS scratch dir garbage collector" - job="find /nfs/scratch/ -type d -mtime +1 -name 'session-*' -exec rm -r '{}' \\;" -- hosts: tg:sut - remote_user: testuser - sudo: yes - tasks: - - name: interfaces file - template: src=files/interfaces_physical dest=/etc/network/interfaces owner=root group=root mode=644 - - name: copy sysctl file - template: src=files/90-csit dest=/etc/sysctl.d/90-csit.conf owner=root group=root mode=644 - - name: isolcpus and pstate parameter - lineinfile: dest=/etc/default/grub regexp=^GRUB_CMDLINE_LINUX= line=GRUB_CMDLINE_LINUX="\"isolcpus={{ isolcpus }} nohz_full={{ isolcpus }} rcu_nocbs={{ isolcpus }} intel_pstate=disable\"" - - name: update grub - command: update-grub - - name: Install python-dev - apt: name=python-dev state=present - - name: Install python-virtualenv - apt: name=python-virtualenv state=present - - name: Install python pip - apt: name=python-pip state=present - - name: Install libpcap-dev - apt: name=libpcap-dev state=present - - name: Install cpufrequtils - apt: name=cpufrequtils state=present - - name: Set cpufrequtils defaults - copy: src=files/cpufrequtils dest=/etc/default/cpufrequtils owner=root group=root mode=0644 - - name: Disable IRQ load balancing - copy: src=files/irqbalance dest=/etc/default/irqbalance owner=root group=root mode=0644 - - name: Disable ondemand - service: name=ondemand enabled=no - - name: Install cgroup-support - apt: name=cgroup-bin state=present - - name: Install zlib1g-dev - apt: name=zlib1g-dev state=present - - name: Copy Python requirements file - copy: src=files/requirements.txt dest=/tmp/requirements.txt - - name: Install PIP requirements - pip: requirements=/tmp/requirements.txt - - name: Install libnuma-dev - apt: name=libnuma-dev state=present - - name: IRQ pinning - lineinfile: - dest: /etc/rc.local - insertbefore: '^exit 0' - line: 'for l in `ls /proc/irq`; do echo 1 | sudo tee /proc/irq/$l/smp_affinity; done' - - name: RCU pinning - lineinfile: - dest: /etc/rc.local - insertbefore: '^exit 0' - line: 'for i in `pgrep rcu[^c]` ; do sudo taskset -pc 0 $i ; done' - - name: CPU writeback mask - lineinfile: - dest: /etc/rc.local - insertbefore: '^exit 0' - line: 'echo 1 | sudo tee /sys/bus/workqueue/devices/writeback/cpumask' -- hosts: tg - remote_user: testuser - sudo: yes - tasks: - - name: Install unzip - apt: name=unzip state=present -- hosts: sut - remote_user: testuser - sudo: yes - tasks: - - name: Install dkms - apt: name=dkms state=present - - name: Install pkg-config - apt: name=pkg-config state=present - - name: Install libglib2.0-dev - apt: name=libglib2.0-dev state=present - - name: Install autoconf - apt: name=autoconf state=present - - name: Install libtool - apt: name=libtool state=present - - name: Install screen - apt: name=screen state=present - - name: Install libmbedcrypto0 - apt: name=libmbedcrypto0 state=present - - name: Install libmbedtls10 - apt: name=libmbedtls10 state=present - - name: Install libmbedx509-0 - apt: name=libmbedx509-0 state=present - - name: Install lxc - apt: name=lxc state=present - - name: Disable 80-vpp.conf - file: - src: /dev/null - dest: /etc/sysctl.d/80-vpp.conf - state: link - - name: Install java - apt: name=openjdk-8-jdk state=present - - name: Add Docker's official GPG key - apt_key: - url: "https://download.docker.com/linux/ubuntu/gpg" - state: present - - name: Add Docker's stable repository - apt_repository: - repo: deb [arch=amd64] https://download.docker.com/linux/ubuntu xenial stable - state: present - - name: Install Docker CE - apt: name=docker-ce state=present - - name: Add Kubernetes's official GPG key - apt_key: - url: "https://packages.cloud.google.com/apt/doc/apt-key.gpg" - state: present - - name: Add Kubernetes's stable repository - apt_repository: - repo: deb http://apt.kubernetes.io/ kubernetes-xenial main - state: present - - name: Install Kubernetes kubelet - apt: name=kubelet state=present - - name: Install Kubernetes kubeadm - apt: name=kubeadm state=present
\ No newline at end of file diff --git a/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml b/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml deleted file mode 100644 index 938a2da454..0000000000 --- a/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml +++ /dev/null @@ -1,115 +0,0 @@ ---- -- hosts: virl - remote_user: virl - tasks: - - name: install virl-bootstrap - git: - repo: 'https://github.com/VIRL-Open/virl-bootstrap.git' - dest: /home/virl/virl-bootstrap - version: xenial - - name: copy vsetting file to /etc - sudo: yes - shell: /usr/bin/install -m 666 /home/virl/virl-bootstrap/vsettings.ini /etc/virl.ini - - command: crudini --inplace --set /etc/virl.ini DEFAULT hostname {{ hostname }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT domain_name linuxfoundation.org - - command: crudini --inplace --set /etc/virl.ini DEFAULT using_dhcp_on_the_public_port False - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_port dummy3 - - command: crudini --inplace --set /etc/virl.ini DEFAULT Static_IP 10.30.49.28 - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_network 10.30.49.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_netmask {{ ansible_default_ipv4["netmask"] }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_gateway 10.30.49.1 - - command: crudini --inplace --set /etc/virl.ini DEFAULT proxy False - - command: crudini --inplace --set /etc/virl.ini DEFAULT ntp_server pool.ntp.org - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_nameserver 199.204.44.24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_nameserver 199.204.47.54 - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_master vsm-md.virl.info - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_id {{ hostname }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_domain linuxfoundation.org - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_masterless false - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port {{ virl_public_port }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network {{ virl_l2_network }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_mask 255.255.255.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network_gateway {{ virl_l2_gateway }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_start_address {{ virl_l2_start }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_end_address {{ virl_l2_end }} - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_address {{ ansible_default_ipv4["address"] }}/24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_flat_nameserver 199.204.44.24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_flat_nameserver 199.204.47.54 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port2_enabled True - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port2 dummy0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network2 172.16.2.0/24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_mask2 255.255.255.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network_gateway2 172.16.2.1 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_start_address2 172.16.2.50 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_end_address2 172.16.2.253 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_address2 172.16.2.254/24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_flat2_nameserver 199.204.44.24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_flat2_nameserver 199.204.47.54 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_port dummy1 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_network 172.16.3.0/24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_mask 255.255.255.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_network_gateway 172.16.3.1 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_floating_start_address 172.16.3.50 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_floating_end_address 172.16.3.253 - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_address 172.16.3.254/24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_snat_nameserver 199.204.44.24 - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_snat_nameserver 199.204.47.54 - - command: crudini --inplace --set /etc/virl.ini DEFAULT ramdisk True - - command: crudini --inplace --set /etc/virl.ini DEFAULT ank 19401 - - command: crudini --inplace --set /etc/virl.ini DEFAULT ank_live 19402 - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_webservices 19399 - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_user_management 19400 - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_apache_port 80 - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_webmux 19403 - - command: crudini --inplace --set /etc/virl.ini DEFAULT Start_of_serial_port_range 17000 - - command: crudini --inplace --set /etc/virl.ini DEFAULT End_of_serial_port_range 18000 - - command: crudini --inplace --set /etc/virl.ini DEFAULT serial_port 19406 - - command: crudini --inplace --set /etc/virl.ini DEFAULT vnc_port 19407 - - command: crudini --inplace --set /etc/virl.ini DEFAULT location_region US - - command: crudini --inplace --set /etc/virl.ini DEFAULT vnc False - - command: crudini --inplace --set /etc/virl.ini DEFAULT guest_account True - - command: crudini --inplace --set /etc/virl.ini DEFAULT user_list tb4-virl:Cisco1234 - - command: crudini --inplace --set /etc/virl.ini DEFAULT uwmadmin_password Cisco1234 - - command: crudini --inplace --set /etc/virl.ini DEFAULT password password - - command: crudini --inplace --set /etc/virl.ini DEFAULT mysql_password password - - command: crudini --inplace --set /etc/virl.ini DEFAULT keystone_service_token fkgjhsdflkjh - - command: crudini --inplace --set /etc/virl.ini DEFAULT enable_cinder True - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_file True - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_size 20000 - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_location /var/lib/cinder/cinder-volumes.lvm - - command: crudini --inplace --set /etc/virl.ini DEFAULT dummy_int True - - command: crudini --inplace --set /etc/virl.ini DEFAULT this_node_is_the_controller True - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_controller_hostname controller - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_controller_IP 172.16.10.250 - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_port dummy2 - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_IP 172.16.10.250 - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_network 172.16.10.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_netmask 255.255.255.0 - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_gateway 172.16.10.1 - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosv True - - command: crudini --inplace --set /etc/virl.ini DEFAULT csr1000v True - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv432 False - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv52 False - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv True - - command: crudini --inplace --set /etc/virl.ini DEFAULT nxosv True - - command: crudini --inplace --set /etc/virl.ini DEFAULT vpagent True - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosvl2 True - - command: crudini --inplace --set /etc/virl.ini DEFAULT asav True - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_server True - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_iperf True - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_routem True - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_ostinato True - - command: crudini --inplace --set /etc/virl.ini DEFAULT server True - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_mac True - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_win32 True - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_win64 True - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_linux True - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_clients True - - command: crudini --inplace --set /etc/virl.ini DEFAULT ram_overcommit 2 - - command: crudini --inplace --set /etc/virl.ini DEFAULT web_editor True - - command: crudini --inplace --set /etc/virl.ini DEFAULT mitaka True - - command: crudini --inplace --set /etc/virl.ini DEFAULT kilo False - - command: crudini --inplace --set /etc/virl.ini DEFAULT libvirt_cpu_mode host-passthrough - - command: crudini --inplace --set /etc/virl.ini DEFAULT neutron_bridge_flooding True - - name: copy vinstall bootstrap wrapper script - template: src=files/virl/virl-bootstrap-wrapper dest=/home/virl/virl-bootstrap/virl-bootstrap-wrapper owner=virl group=virl mode=775 diff --git a/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml b/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml deleted file mode 100644 index c31e1a3f1d..0000000000 --- a/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml +++ /dev/null @@ -1,83 +0,0 @@ ---- -- hosts: virl - remote_user: testuser - sudo: yes - tasks: - - name: Add jenkins-in user - user: name=jenkins-in shell=/bin/bash comment="Jenkins user" - - name: Add jenkins-in user to sudoers - copy: src=files/sudoers_jenkins-in dest=/etc/sudoers.d/jenkins-in owner=root group=root mode=660 - - name: Set Jenkins user authorized key - authorized_key: user=jenkins-in key="{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" - - name: copy salt states for dnsmasq and nfs - synchronize: src=files/salt/ dest=/ - - name: install NFS salt - shell: salt-call --local state.sls ckoester.nfs-server - - name: NFS symlink - shell: ln -s /nfs/scratch /scratch - args: - creates: /scratch - - name: Upate Nova CPU mode - ini_file: dest=/etc/nova/nova.conf section=libvirt option=cpu_mode value=host-passthrough - - name: Restart nova-compute service - service: name=nova-compute state=restarted - - name: Change listen interface in NTP settings - lineinfile: dest=/etc/ntp.conf state=present regexp='^interface listen 172.16.*' line='interface listen {{ ansible_default_ipv4["address"] }}' - - name: Restart NTP service - service: name=ntp state=restarted - - name: Permit SSH user environment - lineinfile: dest=/etc/ssh/sshd_config state=present regexp='PermitUserEnvironment.*' line='PermitUserEnvironment yes' - - name: Restart SSH daemon - service: name=ssh state=restarted -- hosts: virl - remote_user: jenkins-in - tasks: - - name: clone csit git repository - git: repo=https://gerrit.fd.io/r/csit - dest=/home/jenkins-in/git/csit - - name: Link testcase-infra directory - command: ln -sf /home/jenkins-in/git/csit/resources/tools/virl /home/jenkins-in/testcase-infra - args: - creates: /home/jenkins-in/testcase-infra - - name: Create bin directory - file: path=/home/jenkins-in/bin state=directory mode=0755 - - name: Link start-testcase executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/start-testcase /home/jenkins-in/bin/start-testcase - args: - creates: /home/jenkins-in/bin/start-testcase - - name: Link stop-testcase executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/stop-testcase /home/jenkins-in/bin/stop-testcase - args: - creates: /home/jenkins-in/bin/stop-testcase - - name: Link kill-idle-testcases executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/kill-idle-testcases /home/jenkins-in/bin/kill-idle-testcases - args: - creates: /home/jenkins-in/bin/kill-idle-testcases - - name: Copy SSH private key - copy: src=files/virl/id_rsa_virl dest=/home/jenkins-in/.ssh/id_rsa_virl mode=600 - - name: Copy SSH public key - copy: src=files/virl/id_rsa_virl.pub dest=/home/jenkins-in/.ssh/id_rsa_virl.pub mode=644 - - name: Copy SSH environment - copy: src=files/virl/ssh_environment dest=/home/jenkins-in/.ssh/environment mode=644 - - name: Add ~/bin to path - lineinfile: dest=/home/jenkins-in/.bashrc state=present line='PATH=${HOME}/bin:$PATH' - - name: Update own IP address in start script - shell: sed -i /home/jenkins-in/testcase-infra/bin/start-testcase -e 's/10.30.51.28/{{ ansible_default_ipv4["address"] }}/' - - name: Add authorized key - lineinfile: dest=/home/jenkins-in/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQD4gderzsZyoxHULjuvPHoJuKnkaGrykqtuoqs/k1/jUdxitPoY5eX2cVYqww7MiUif7zLsiXbt5mHtyxAYCluDxAuIcy1xgSZY3MpmmSqDie4A/FdVfCUqCcpf3TZKsRP0an1MNrKIe0JFZV+uU889IDRQRdboGMs3+4cn5b9fOutpv71qwFVrTm9PZbqfQonrrN8Jp4Mz3XaZDpK22xwDAWhYOZ0eV6CJWquUgbYAHE6/HHMvd0zeJKaWZCXO/1tOGOj6cjgoViHqbnCtmYCjmv/ir0IglzbUdWdOqQY5YkhnPonveV48lVKrmBipqgbDezAUQD8wOQ7HttpYpKgt jenkins-in@tb4-virl' -# All of the below will fail if VIRL user/project already exist -- hosts: virl - remote_user: virl - tasks: - - name: Create VIRL project - shell: virl_uwm_client project-edit --name tb4-virl --enabled True -i 400 -r 1024000 -c 500 - ignore_errors: true -# - name: Delete VIRL project user -# shell: virl_uwm_client user-delete --name tb4-virl -# ignore_errors: true -# - name: Recreate VIRL project user -# shell: virl_uwm_client user-create --name tb4-virl --role admin --project tb4-virl --set-password Cisco1234 -# ignore_errors: true - - name: Create VPP flavor - shell: virl_uwm_client flavor-create --name vPP --ram 4096 --vcpus 2 --disk 0 - ignore_errors: true diff --git a/resources/tools/testbed-setup/playbooks/04-disk-image.yaml b/resources/tools/testbed-setup/playbooks/04-disk-image.yaml deleted file mode 100644 index fe069375c6..0000000000 --- a/resources/tools/testbed-setup/playbooks/04-disk-image.yaml +++ /dev/null @@ -1,29 +0,0 @@ ---- -- hosts: virl - remote_user: virl - tasks: - - name: Create server image directory - file: path=/home/virl/virl-server-image state=directory mode=0755 - - name: Copy UBUNTU server image - copy: src=/home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu dest=/home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu owner=virl group=virl mode=644 - - name: Copy CENTOS server image - copy: src=/home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu dest=/home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu owner=virl group=virl mode=644 - - name: Import UBUNTU server image into glance - shell: virl_uwm_client image-create --subtype server --version csit-ubuntu-16.04.1_2017-10-21_2.0 --image-on-server /home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu - - name: Import CENTOS server image into glance - shell: virl_uwm_client image-create --subtype server --version csit-centos-7.3-1611_2017-02-23_1.4 --image-on-server /home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu -- hosts: virl - remote_user: testuser - sudo: yes - tasks: - - name: Create common directory - file: path=/nfs/common state=directory mode=0755 - - name: Create Nested VM directory - file: path=/nfs/common/nested-vm state=directory mode=0755 - - name: Copy Nested VM image - copy: src=/home/virl/virl-server-image/csit-nested-1.6.img dest=/nfs/common/nested-vm/csit-nested-1.6.img owner=virl group=virl mode=644 - - name: NFS symlink - file: - src: /nfs/common/nested-vm-current.img.disabled - dest: /nfs/common/nested-vm/csit-nested-1.6.img - state: link
\ No newline at end of file diff --git a/resources/tools/testbed-setup/playbooks/files/90-csit b/resources/tools/testbed-setup/playbooks/files/90-csit deleted file mode 100644 index 2304162ce8..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/90-csit +++ /dev/null @@ -1,79 +0,0 @@ -# change the minimum size of the hugepage pool. -vm.nr_hugepages=4096 - -# this file contains the maximum number of memory map areas a process -# may have. memory map areas are used as a side-effect of calling -# malloc, directly by mmap and mprotect, and also when loading shared -# libraries. -# -# while most applications need less than a thousand maps, certain -# programs, particularly malloc debuggers, may consume lots of them, -# e.g., up to one or two maps per allocation. -# must be greater than or equal to (2 * vm.nr_hugepages). -vm.max_map_count=200000 - -# hugetlb_shm_group contains group id that is allowed to create sysv -# shared memory segment using hugetlb page. -vm.hugetlb_shm_group=0 - -# this control is used to define how aggressive the kernel will swap -# memory pages. higher values will increase agressiveness, lower values -# decrease the amount of swap. a value of 0 instructs the kernel not to -# initiate swap until the amount of free and file-backed pages is less -# than the high water mark in a zone. -vm.swappiness=0 - -# this parameter can be used to control the nmi watchdog -# (i.e. the hard lockup detector) on x86 systems. -# -# 0 - disable the hard lockup detector -# 1 - enable the hard lockup detector -# -# the hard lockup detector monitors each cpu for its ability to respond to -# timer interrupts. the mechanism utilizes cpu performance counter registers -# that are programmed to generate non-maskable interrupts (nmis) periodically -# while a cpu is busy. hence, the alternative name 'nmi watchdog'. -# -# the nmi watchdog is disabled by default if the kernel is running as a guest -# in a kvm virtual machine. this default can be overridden by adding -#kernel. nmi_watchdog=1 - -# shared memory max must be greator or equal to the total size of hugepages. -# for 2mb pages, totalhugepagesize = vm.nr_hugepages * 2 * 1024 * 1024 -# if the existing kernel.shmmax setting (cat /sys/proc/kernel/shmmax) -# is greater than the calculated totalhugepagesize then set this parameter -# to current shmmax value. -kernel.shmmax=8589934592 - -# this option can be used to select the type of process address -# space randomization that is used in the system, for architectures -# that support this feature. -# 0 - turn the process address space randomization off. this is the -# default for architectures that do not support this feature anyways, -# and kernels that are booted with the "norandmaps" parameter. -kernel.randomize_va_space=0 - -# this parameter can be used to control the soft lockup detector. -# -# 0 - disable the soft lockup detector -# 1 - enable the soft lockup detector -# -# the soft lockup detector monitors cpus for threads that are hogging the cpus -# without rescheduling voluntarily, and thus prevent the 'watchdog/n' threads -# from running. the mechanism depends on the cpus ability to respond to timer -# interrupts which are needed for the 'watchdog/n' threads to be woken up by -# the watchdog timer function, otherwise the nmi watchdog - if enabled - can -# detect a hard lockup condition. -#kernel.soft_watchdog=0 - -# this value can be used to control on which cpus the watchdog may run. -# the default cpumask is all possible cores, but if no_hz_full is -# enabled in the kernel config, and cores are specified with the -# nohz_full= boot argument, those cores are excluded by default. -# offline cores can be included in this mask, and if the core is later -# brought online, the watchdog will be started based on the mask value. -# -# typically this value would only be touched in the nohz_full case -# to re-enable cores that by default were not running the watchdog, -# if a kernel lockup was suspected on those cores. -kernel.watchdog_cpumask=0,18 diff --git a/resources/tools/testbed-setup/playbooks/files/apt-sources.list b/resources/tools/testbed-setup/playbooks/files/apt-sources.list deleted file mode 100644 index c8ab48e8c8..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/apt-sources.list +++ /dev/null @@ -1,61 +0,0 @@ -# deb http://us.archive.ubuntu.com/ubuntu/ xenial main restricted - -# deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted -# deb http://security.ubuntu.com/ubuntu xenial-security main restricted - -# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to -# newer versions of the distribution. -deb http://us.archive.ubuntu.com/ubuntu/ xenial main restricted -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial main restricted - -## Major bug fix updates produced after the final release of the -## distribution. -deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted - -## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu -## team. Also, please note that software in universe WILL NOT receive any -## review or updates from the Ubuntu security team. -deb http://us.archive.ubuntu.com/ubuntu/ xenial universe -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial universe -deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates universe -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates universe - -## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu -## team, and may not be under a free licence. Please satisfy yourself as to -## your rights to use the software. Also, please note that software in -## multiverse WILL NOT receive any review or updates from the Ubuntu -## security team. -deb http://us.archive.ubuntu.com/ubuntu/ xenial multiverse -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial multiverse -deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates multiverse -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates multiverse - -## N.B. software from this repository may not have been tested as -## extensively as that contained in the main release, although it includes -## newer versions of some applications which may provide useful features. -## Also, please note that software in backports WILL NOT receive any review -## or updates from the Ubuntu security team. -deb http://us.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse -deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse - -deb http://security.ubuntu.com/ubuntu xenial-security main restricted -deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted -deb http://security.ubuntu.com/ubuntu xenial-security universe -deb-src http://security.ubuntu.com/ubuntu xenial-security universe -deb http://security.ubuntu.com/ubuntu xenial-security multiverse -deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse - -## Uncomment the following two lines to add software from Canonical's -## 'partner' repository. -## This software is not part of Ubuntu, but is offered by Canonical and the -## respective vendors as a service to Ubuntu users. -# deb http://archive.canonical.com/ubuntu xenial partner -# deb-src http://archive.canonical.com/ubuntu xenial partner - -## Uncomment the following two lines to add software from Ubuntu's -## 'extras' repository. -## This software is not part of Ubuntu, but is offered by third-party -## developers who want to ship their latest software. -# deb http://extras.ubuntu.com/ubuntu xenial main -# deb-src http://extras.ubuntu.com/ubuntu xenial main diff --git a/resources/tools/testbed-setup/playbooks/files/cpufrequtils b/resources/tools/testbed-setup/playbooks/files/cpufrequtils deleted file mode 100644 index 03070fefe1..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/cpufrequtils +++ /dev/null @@ -1 +0,0 @@ -GOVERNOR="performance" diff --git a/resources/tools/testbed-setup/playbooks/files/grub b/resources/tools/testbed-setup/playbooks/files/grub deleted file mode 100644 index d4e27b3f0f..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/grub +++ /dev/null @@ -1,34 +0,0 @@ -# If you change this file, run 'update-grub' afterwards to update -# /boot/grub/grub.cfg. -# For full documentation of the options in this file, see: -# info -f grub -n 'Simple configuration' - -GRUB_DEFAULT=0 -GRUB_TIMEOUT=10 -GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` -GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,115200n8" -GRUB_CMDLINE_LINUX="" - -# Uncomment to enable BadRAM filtering, modify to suit your needs -# This works with Linux (no patch required) and with any kernel that obtains -# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) -#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" - -# Uncomment to disable graphical terminal (grub-pc only) -#GRUB_TERMINAL=console -GRUB_TERMINAL=serial -GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1" - -# The resolution used on graphical terminal -# note that you can use only modes which your graphic card supports via VBE -# you can see them in real GRUB with the command `vbeinfo' -#GRUB_GFXMODE=640x480 - -# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux -#GRUB_DISABLE_LINUX_UUID=true - -# Uncomment to disable generation of recovery mode menu entries -#GRUB_DISABLE_RECOVERY="true" - -# Uncomment to get a beep at grub start -#GRUB_INIT_TUNE="480 440 1" diff --git a/resources/tools/testbed-setup/playbooks/files/hostname b/resources/tools/testbed-setup/playbooks/files/hostname deleted file mode 100644 index 56baac7265..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/hostname +++ /dev/null @@ -1 +0,0 @@ -{{ hostname }} diff --git a/resources/tools/testbed-setup/playbooks/files/hosts b/resources/tools/testbed-setup/playbooks/files/hosts deleted file mode 100644 index 82dee7b4f7..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/hosts +++ /dev/null @@ -1,7 +0,0 @@ -127.0.0.1 localhost -{{ ansible_default_ipv4["address"] }} {{ hostname }}.linuxfoundation.org {{ hostname }} - -# The following lines are desirable for IPv6 capable hosts -::1 localhost ip6-localhost ip6-loopback -ff02::1 ip6-allnodes -ff02::2 ip6-allrouters diff --git a/resources/tools/testbed-setup/playbooks/files/interfaces_physical b/resources/tools/testbed-setup/playbooks/files/interfaces_physical deleted file mode 100644 index 734d8cd18f..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/interfaces_physical +++ /dev/null @@ -1,14 +0,0 @@ -# This file describes the network interfaces available on your system -# and how to activate them. For more information, see interfaces(5). - -# The loopback network interface -auto lo -iface lo inet loopback - -# The primary network interface -auto {{ ansible_default_ipv4["interface"] }} -iface {{ ansible_default_ipv4["interface"] }} inet static - address {{ ansible_default_ipv4["address"] }} - netmask {{ ansible_default_ipv4["netmask"] }} - gateway {{ ansible_default_ipv4["gateway"] }} - dns-nameservers 199.204.44.24 199.204.47.54 diff --git a/resources/tools/testbed-setup/playbooks/files/interfaces_virl b/resources/tools/testbed-setup/playbooks/files/interfaces_virl deleted file mode 100644 index 25ea35a0c5..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/interfaces_virl +++ /dev/null @@ -1,17 +0,0 @@ -# This file describes the network interfaces available on your system -# and how to activate them. For more information, see interfaces(5). - -# The loopback network interface -auto lo -iface lo inet loopback - -# The primary network interface -auto br1 -iface br1 inet static - address {{ ansible_default_ipv4["address"] }} - netmask {{ ansible_default_ipv4["netmask"] }} - gateway {{ ansible_default_ipv4["gateway"] }} - dns-nameservers 199.204.44.24 199.204.47.54 - bridge_maxwait 0 - bridge_ports eth0 eth4 - bridge_stp off diff --git a/resources/tools/testbed-setup/playbooks/files/irqbalance b/resources/tools/testbed-setup/playbooks/files/irqbalance deleted file mode 100644 index 84fb5f17e2..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/irqbalance +++ /dev/null @@ -1,6 +0,0 @@ -#Configuration for the irqbalance daemon - -#Should irqbalance be enabled? -ENABLED="0" -#Balance the IRQs only once? -ONESHOT="0" diff --git a/resources/tools/testbed-setup/playbooks/files/nova_os_ip.patch b/resources/tools/testbed-setup/playbooks/files/nova_os_ip.patch deleted file mode 100644 index a943dc9b25..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/nova_os_ip.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- api/metadata/base.py.old 2017-04-26 12:38:52.522991596 +0000 -+++ api/metadata/base.py 2017-04-26 10:06:46.396450566 +0000 -@@ -493,7 +493,7 @@ - path = 'openstack/%s/%s' % (version, VD_JSON_NAME) - yield (path, self.lookup(path)) - -- if self._check_version(LIBERTY, version, ALL_OPENSTACK_VERSIONS): -+ if False and self._check_version(LIBERTY, version, ALL_OPENSTACK_VERSIONS): - path = 'openstack/%s/%s' % (version, NW_JSON_NAME) - yield (path, self.lookup(path)) - - diff --git a/resources/tools/testbed-setup/playbooks/files/requirements.txt b/resources/tools/testbed-setup/playbooks/files/requirements.txt deleted file mode 120000 index f96397df02..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/requirements.txt +++ /dev/null @@ -1 +0,0 @@ -../../../../../requirements.txt
\ No newline at end of file diff --git a/resources/tools/testbed-setup/playbooks/files/salt.b64 b/resources/tools/testbed-setup/playbooks/files/salt.b64 deleted file mode 100644 index 5e76a8583b..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt.b64 +++ /dev/null @@ -1,27 +0,0 @@ -H4sIAF7JK1cAA+1a32/bNhD2a/RXcMmDkyGy9VuDsQwDhhUoNuxhHfbSFQYj0TZrSVRJyklQ9H/f -UZZsGbUj27HVduOXBzvkmUfyuzveURI4kcPeeWEBwtBXn3boW83PGj3bCS3P9v3QcnuW7YJAD/ln -nleJQkjMEeolLMIJjlOabZdr6/9GIRT/gi/OaQOH8O+HgeI/8GzNfxdY8S/OFwgO598LLE/z3wU2 -+Y/mjAhJ+GkNoeTf34d/LwwskLPB/V3NfxfYwX82EaYgfEH4QCTihToUwYFl7eTfBrJr/l0X+Hds -R/FvnWSFLfif80+zKCliMjIQMlFN/6BBP81gg5JkZ3/EsgmdFpwYX3opGkdgh//HmUix+HAC5++1 -+7/lr+O/4zng/5YfeNr/u8B2/6/p1879X0fr+X+CVHD//M9XH8r/IRHU+V8XaOd/FQOOPgza4n/o -N/j3FP+uHdo6/ncBxbQK/hOakEFMOYkk40+qRR0IBdjACHHGZNUw5azIN1pSBqcHAvc2DDXWUEQc -y2h2gjHtMAyrQTlrG29BebI5XqOlOUcioyF5zBmX63WnOMNTEo82xAPPq/6XJM0TLKHtPc3e46pV -sIJH0HapPGc03Oo7anRRq7s0DOgaL7vGvMgymk2VTtVCIzJoNCkFGU5heDXanPCMJNWghlHkMcxm -3FhFlMbq15u/XPZPBDI53nl+t/t/VQC8IBUs/d/zdtd/QbjK/3xL5X9OoOK/9v/z4zPzQhXfypby -+bSu/9beIeY0H4MgnTyN0F+8IFU7JxNOxGyEXuFEkBYb/tLL1qjQ7v/LGPYSHeUZ/1z9t87/LNsK -1P2PH+j7v06wL//VYXOUjpb4D1lf2OBfxX/XcXT93wmu0EZGhOSMIBxFRAgEib/kLEEJFRJNGC9z -JfEE9pEK9DCj0Qyl+AndkyrTILFxdXEhGfrj1RsUJZRkUgwQekNqAXHt3wyMK+MK/fqIIaUi5agg -vXAQzuLymzuC7tIgZywlAi0xY0Kqo8S+5g+34imLbjM2FsW95ISMoxmJ5jcrGeeasx0yW3V7K41g -9F6lEE2FGM75vU9XGieCxnfWbcSZEGkmt42+Hqae/efDbJtUM3G++PgRKV98289pkmA+mBLZf3fd -V+nsKHHGGZEPjM/7t5XUlGM4omupDYG+HToDOxjYA2voeH10c4M+fVITgTmobHssPhRYzLbs5X5z -cFon4TRm4Zx2Fm7bTrhbdsI9dA51+XFx8b0yq1bxL+3OB+P5+9/TPAc85Pmf44Xq/sfS5383aOH/ -5Zc/vfb7Hyewa/4D2/JU/ed7vj7/u0B5+tOMymHzzv9MNyO1VS1TyqbCS6PtHqSS/vYi7NeNFv9/ -efHXO6T+g/iv3v9zbNvT8b8T7MV/01OP0NFW/4V2UPPvh56t6j/f0vVfJ7hCC5qOBIEKT94VudoM -iaS4cxCRIyMmUJXQXFKWocu/X//5ex2GLw1cyBlUUJe/YA4Wk6HflpaDfqxt6OeIioiBzaQ/QXRf -DgzDQHBPyIIk6K3jev476GD5Zvt3yw6DE5Hjh8wwyCOJ0LAQfCjuaVZbIzJj9I9R12sm3rNoGU/h -vHrAT621S0NwXUhBYlJVDy/R3V44NSXXBdRR2t19V75NcF04bddtZsxUhbdYfgXKWLKA70JyGkmT -8RhMwjSBttikGVjFBEdECZPHiORy3XaXMGjNaWyqkHM3lGk+VPM369gDXSCgItBSYmMWy6uqu+f2 -YULBTscql1gK79iFLWL9HwblX//z1e+hVxCYc9yueJvcM5pjlsKv71hO1P18NC/D0xHJURn2VQ54 -+tCyQnn+H/j+t+Xo878LrPj/ut7/Lus/zf/5sck/rA6O+kF8hve/D+I/cAJL898FdvAvIYUrV3xs -zt9E2/N/y6uf/7hh4Dtl/aff/+4GKpcq77TL90jQPRZkee+CTLSuC/Wti4aGhoaGhoaGhoaGhoaG -hoaGhoaGhsa3hH8BeOCWxQBQAAA= diff --git a/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf b/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf deleted file mode 100644 index fce910cc0b..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf +++ /dev/null @@ -1,3 +0,0 @@ -file_roots: - base: - - /srv/salt/ diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls deleted file mode 100644 index bf3e47f9b3..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls +++ /dev/null @@ -1,3 +0,0 @@ -include: - - ckoester.nfs-server.install - - ckoester.nfs-server.configure diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls deleted file mode 100644 index ce362a38b2..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls +++ /dev/null @@ -1,31 +0,0 @@ -/nfs: - file.directory: - - user: root - - group: root - - mode: 755 - -/nfs/scratch: - file.directory: - - user: root - - group: root - - mode: 1777 - -/nfs/ro: - file.directory: - - user: virl - - group: virl - - mode: 755 - -/etc/exports: - file.managed: - - mode: 644 - - template: jinja - - source: "salt://ckoester/nfs-server/files/exports" - -nfs_server_running: - service.running: - - name: nfs-kernel-server - -update_exports: - cmd.run: - - name: exportfs -ra diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports deleted file mode 100644 index 23802be486..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports +++ /dev/null @@ -1,12 +0,0 @@ -# /etc/exports: the access control list for filesystems which may be exported -# to NFS clients. See exports(5). -# -# Example for NFSv2 and NFSv3: -# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) -# -# Example for NFSv4: -# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) -# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) -# -/nfs/scratch {{ salt['pillar.get']('virl:l2_network', salt['grains.get']('l2_network', '172.16.1.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l2_network2', salt['grains.get']('l2_network2', '172.16.2.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l3_network', salt['grains.get']('l3_network', '172.16.3.0/24' )) }}(rw,no_root_squash,no_subtree_check) -/nfs/ro *(ro,no_root_squash,no_subtree_check) diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls deleted file mode 100644 index 0f136346f8..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls +++ /dev/null @@ -1,5 +0,0 @@ -nfs-kernel-server install: - pkg.installed: - - skip_verify: True - - refresh: False - - name: nfs-kernel-server diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers b/resources/tools/testbed-setup/playbooks/files/sudoers deleted file mode 100644 index 367c390130..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/sudoers +++ /dev/null @@ -1 +0,0 @@ -testuser ALL=(root) NOPASSWD:ALL diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in b/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in deleted file mode 100644 index 1797c2c636..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in +++ /dev/null @@ -1 +0,0 @@ -jenkins-in ALL=(root) NOPASSWD: /bin/rm -fr /scratch/*, /bin/rm -fr /nfs/scratch/* diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers_virl b/resources/tools/testbed-setup/playbooks/files/sudoers_virl deleted file mode 100644 index e0cf48ac10..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/sudoers_virl +++ /dev/null @@ -1 +0,0 @@ -virl ALL=(root) NOPASSWD:ALL diff --git a/resources/tools/testbed-setup/playbooks/files/ttyS0 b/resources/tools/testbed-setup/playbooks/files/ttyS0 deleted file mode 100644 index 0ed8550190..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/ttyS0 +++ /dev/null @@ -1,10 +0,0 @@ -# ttyS0 - getty -# -# This service maintains a getty on ttyS0 from the point the system is -# started until it is shut down again. - -start on stopped rc RUNLEVEL=[12345] -stop on runlevel [!12345] - -respawn -exec /sbin/getty -L 115200 ttyS0 vt102 diff --git a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl deleted file mode 100644 index b4c3de745b..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl +++ /dev/null @@ -1,27 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb -v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd -vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2 -4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc -1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs -8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7 -0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN -EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN -0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU -MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD -p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW -79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG -OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD -GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef -bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg -8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu -f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u -UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/ -+m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT -D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/ -sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn -g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY -qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8 -EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD -BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN ------END RSA PRIVATE KEY----- diff --git a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub deleted file mode 100644 index 0ef508c8a1..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBQOVOnNIenAtCi1k4VLgCBw80RYKc/UAHaFYWa8j7wpqH+Bu/yu5lT1GqE+znq3IrPFuG82RjhVsfkXUaKUdm7eYurMzgp+CEyZp4wSM7VPsFhh2+4F9O8iW6WN9Da8CWdisPCf4KXEmTzWbSkOC+ssRfipVWHawaHtQSRjLmvzYM1rbhWPM8HUn9zxr3M/wWhlSFgjMXgUu9EyNQAOlsxeAkywalpkubP3lqnQSi3u9vUJzUu8X3uLIEKu0g5IpEoDnRmEsaMwqY7CdhT5w/nvXy1umugNWLpUk6jvN65fJ60yzxgGX2RZuVYb0Go/2Ny0W+yaLkbuFeCrVjy74P virl@tb4-virl diff --git a/resources/tools/testbed-setup/playbooks/files/virl/ifup b/resources/tools/testbed-setup/playbooks/files/virl/ifup deleted file mode 100755 index a4a743ac63..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/virl/ifup +++ /dev/null @@ -1,25 +0,0 @@ -#! /bin/sh -# Reload the OpenSSH server when an interface comes up, to allow it to start -# listening on new addresses. - -set -e - -# Don't bother to restart sshd when lo is configured. -if [ "$IFACE" = lo ]; then - exit 0 -fi - -# Only run from ifup. -if [ "$MODE" != start ]; then - exit 0 -fi - -if [ "$IFACE" = br1 ]; then - /sbin/ip route delete default - /sbin/ip route add default via 10.30.51.1 - /sbin/ifconfig br1:0 {{ virl_l2_ip }} netmask 255.255.255.0 - exit 0 -fi - - -exit 0 diff --git a/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment b/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment deleted file mode 100644 index 5ec594d181..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment +++ /dev/null @@ -1 +0,0 @@ -PATH=/home/jenkins-in/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games diff --git a/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper b/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper deleted file mode 100644 index dc7ead804d..0000000000 --- a/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper +++ /dev/null @@ -1,58 +0,0 @@ -#!/usr/bin/expect - -if ![ string equal $::env(USER) "root"] { - puts "Please re-run this script as root." - exit 1 -} - -log_file /tmp/virl-bootstrap.log -set timeout 3600 - -spawn ./virl-bootstrap.py -expect "Which step are you on" -send "1\r" - -expect "Salt master" -send "vsm-md.virl.info\r" - -expect "Which step are you on" -send "2\r" - -expect "Salt id" -send "{{ hostname }}\r" -expect "Salt domain name" -send "linuxfoundation.org\r" - -expect "Which step are you on" -send "3\r" - -expect "System hostname" -send "{{ hostname }}\r" -expect "System Domain name" -send "linuxfoundation.org\r" - -expect "Which step are you on" -send "4\r" - -puts "*******************STEP 6*************************************************************************************************************************************************" -expect "Which step are you on" -send "6\r" -expect "Salt installed" - -puts "*******************STEP 8*************************************************************************************************************************************************" -expect "Which step are you on" -send "8\r" - -expect "True" - -puts "*******************STEP 9*************************************************************************************************************************************************" -expect "Which step are you on" -send "9\r" - -expect "Failed: 0" - -puts "*******************STEP 11*************************************************************************************************************************************************" -expect "Which step are you on" -send "11\r" - -expect eof diff --git a/resources/tools/testbed-setup/playbooks/reboot.yaml b/resources/tools/testbed-setup/playbooks/reboot.yaml deleted file mode 100644 index 9e22dcbb58..0000000000 --- a/resources/tools/testbed-setup/playbooks/reboot.yaml +++ /dev/null @@ -1,14 +0,0 @@ -- hosts: all - remote_user: testuser - tasks: - - name: Reboot host - sudo: true - command: shutdown -r now "Ansible updates triggered" - async: 0 - poll: 0 - ignore_errors: true - - name: waiting for server to come back - local_action: wait_for host={{ inventory_hostname }} - state=started - sudo: false - |