diff options
Diffstat (limited to 'resources/tools/testbed-setup')
33 files changed, 1369 insertions, 0 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md new file mode 100644 index 0000000000..a83fe1496f --- /dev/null +++ b/resources/tools/testbed-setup/README.md @@ -0,0 +1,147 @@ +# Testbed Setup + +## Introduction + +This directoctory contains the *high-level* process to set up a hardware +machine as a CSIT testbed, either for use as a physical testbed host or +as a VIRL server. + +Code in this directory is NOT executed as part of a regular CSIT test case +but is stored here merely for archiving and documentation purposes. + + +## Setting up a hardware host + +Documentation below is just bullet points and assumes and understanding +of PXE boot and ansible. + +This process is specific for LF lab, and both examples given here as +well as associated code, are based on the assumption that they are run +in LF environment. If run elsewhere, changes will be required to IP addresses +and other parameters. + +The process below assumes that there is a host used for boostrapping (referred +to as "PXE boostrap server" below), and that the directory containig this README +is available on the PXE bootstrap server in ~testuser/host-setup. + +### Prepare the PXE bootstrap server (one-time) + + - `sudo apt-get install isc-dhcp-server tftpd-hpa nginx-light ansible` + - `cd ~testuser/host-setup` + - `wget 'http://releases.ubuntu.com/14.04/ubuntu-14.04.4-server-amd64.iso'` + - `sudo mkdir /mnt/cdrom` + - `sudo mount -o loop ubuntu-14.04.4-server-amd64.iso /mnt/cdrom/` + - `sudo cp -r /mnt/cdrom/install/netboot/* /var/lib/tftpboot/` + - `sudo mkdir /usr/share/nginx/html/ubuntu` + - `sudo cp -r /mnt/cdrom/* /usr/share/nginx/html/ubuntu/` + - `sudo umount /mnt/cdrom` + - edit ks.cfg and replace IP address with that of your PXE bootstrap server + - `sudo cp ks.cfg /usr/share/nginx/html/ks.cfg` + - edit boot-screens_txt.cfg and replace IP address with that of your PXE bootstrap server + - `sudo cp boot-screens_txt.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/txt.cfg` + - `sudo cp syslinux.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/syslinux.cfg` + +### New testbed host - manual preparation + +- set CIMC address +- set CIMC username, password and hostname + +### Bootstrap the host + +From PXE boostrap server: + + - `cd ~testuser/host-setup/cimc` + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i` + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />'` + - add MAC address to DHCP + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe` + +While Ubuntu install is running: + + - create RAID array. Reboot if needed. + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe` + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]'` + Alternatively, create the RAID array manually. + + - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd` + +When installation is finished: + + - `ssh-copy-id <>` + - `cd ~testuser/host-setup/playbooks` + - edit /etc/ansible/hosts; add the hosts you are installing. *REMOVE ANY HOSTS YOU ARE NOT CURRENTLY INSTALLING*. + + Example for physical testbed hosts: + ~~~ + [tg] + 10.30.51.16 hostname=t1-tg1 + + [sut] + 10.30.51.17 hostname=t1-sut1 + 10.30.51.18 hostname=t1-sut2 + ~~~ + + Example for VIRL hosts -- use the "virl" tag and specify the flat network start and end addresses: + + ~~~ + [virl] + 10.30.51.28 hostname=t4-virl1 virl_l2_start=10.30.51.31 virl_l2_end=10.30.51.105 + ~~~ + + - `ansible-playbook --ask-sudo-pass 01-host-setup.yaml` + - `ansible-playbook reboot.yaml` + +For non-VIRL hosts, stop here. + + +### VIRL installation + +After the host has rebooted: + + - `ansible-playbook 02-virl-bootstrap.yaml` + - ssh to host + - `sudo -s` + - `cd virl-bootstrap` + - `./virl-bootstrap-wrapper` + + This command will error out when run the first time, as the VIRL host is not yet licensed. + + Make sure we contact all three VIRL SALT masters: + + - `for a in 1 2 4 ; do sudo salt-call --master us-${a}.virl.info test.ping ; done` + + - Contact the VIRL team, provide the hostname and domain (linuxfoundation.org), and ask them + to accept the key + + - After the key has been accepted, verify that connectivity with the SALT master is now OK: + + `for a in 1 2 4 ; do sudo salt-call --master us-${a}.virl.info test.ping ; done` + + - `./virl-bootstrap-wrapper` + - `reboot` + +After reboot, ssh to host again + - as VIRL user, NOT AS ROOT: + - `vinstall all` + - `sudo reboot` + +After reboot, ssh to host again + - as VIRL user: + - `sudo salt-call state.sls virl.routervms.all` + - `sudo salt-call state.sls virl.vmm.vmmall` + +Back on the PXE bootstrap server: + + - obtain the current server disk image and place it into + `files/virl-server-image/` as `server.qcow2` + + TO-DO: Need to find a place to store this image + + - `ansible-playbook 03-virl-post-install.yaml` + + - Run the following command ONLY ONCE. Otherwise it will create + duplicates of the VIRL disk image: + + `ansible-playbook 04-disk-image.yaml` + +The VIRL host should now be operational. Test, and when ready, create a ~jenkins-in/status file with the appropriate status. diff --git a/resources/tools/testbed-setup/boot-screens_txt.cfg b/resources/tools/testbed-setup/boot-screens_txt.cfg new file mode 100644 index 0000000000..8736116c1e --- /dev/null +++ b/resources/tools/testbed-setup/boot-screens_txt.cfg @@ -0,0 +1,11 @@ +default install +label install + menu label ^Install + menu default + kernel ubuntu-installer/amd64/linux + append ks=http://10.30.51.28/ks.cfg ksdevice=bootif initrd=ubuntu-installer/amd64/initrd.gz console=tty0 console=ttyS0,115200n8 --- quiet + IPAPPEND 2 +label cli + menu label ^Command-line install + kernel ubuntu-installer/amd64/linux + append tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=false vga=788 initrd=ubuntu-installer/amd64/initrd.gz --- quiet diff --git a/resources/tools/testbed-setup/cimc/cimc.py b/resources/tools/testbed-setup/cimc/cimc.py new file mode 100755 index 0000000000..2e0fc42a25 --- /dev/null +++ b/resources/tools/testbed-setup/cimc/cimc.py @@ -0,0 +1,95 @@ +#!/usr/bin/python +# +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import cimclib +import argparse + +parser = argparse.ArgumentParser() +parser.add_argument("ip", help="CIMC IP address") +parser.add_argument("-u", "--username", help="CIMC username (admin)", + default="admin") +parser.add_argument("-p", "--password", help="CIMC password (cisco123)", + default="cisco123") +parser.add_argument("-d", "--debug", help="Enable debugging", action="count", + default=0) + +parser.add_argument("-i", "--initialize", + help="Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr", + action='store_true') +parser.add_argument("-s", "--set", + help="Set specific BIOS settings", action='append') +parser.add_argument("--wipe", help="Delete all virtual drives", + action='store_true') +parser.add_argument("-r", "--raid", help="Create RAID array", + action='store_true') +parser.add_argument("-rl", "--raid-level", help="RAID level", default='10') +parser.add_argument("-rs", "--raid-size", help="RAID size", default=3*571250) +parser.add_argument("-rd", "--raid-disks", + help="RAID disks ('[1,2][3,4][5,6]')", + default='[1,2][3,4][5,6]') +parser.add_argument("-pxe", "--boot-pxe", help="Reboot using PXE", + action='store_true') +parser.add_argument("-hdd", "--boot-hdd", help="Boot using HDD on next boot", + action='store_true') +parser.add_argument("-poff", "--power-off", help="Power Off", + action='store_true') +parser.add_argument("-pon", "--power-on", help="Power On", action='store_true') +parser.add_argument("-m", "--mac-table", + help="Show interface MAC address table", + action='store_true') + +args = parser.parse_args() + +cookie = cimclib.login(args.ip, args.username, args.password) + +if args.wipe: + cimclib.deleteAllVirtualDrives(args.ip, cookie, args.debug) + +if args.raid: + cimclib.createRaid(args.ip, cookie, "raid-virl", args.raid_level, args.raid_size, args.raid_disks, args.debug) + +if args.initialize: + cimclib.powerOff(args.ip, cookie) + cimclib.restoreBiosDefaultSettings(args.ip, cookie, args.debug) + cimclib.enableConsoleRedir(args.ip, cookie, args.debug) + cimclib.powerOn(args.ip, cookie, args.debug) + cimclib.bootIntoUefi(args.ip, cookie, args.debug) + lom_mac = cimclib.getLOMMacAddress(args.ip, cookie, args.debug) + print "Host {} LOM MAC address: {}".format(args.ip, lom_mac) + +if args.set: + cimclib.setBiosSettings(args.ip, cookie, args.set, args.debug) + +if args.boot_pxe: + cimclib.bootPXE(args.ip, cookie, args.debug) + +if args.boot_hdd: + cimclib.bootHDDPXE(args.ip, cookie, args.debug) + +if args.power_off: + cimclib.powerOff(args.ip, cookie, args.debug) + +if args.power_on: + cimclib.powerOn(args.ip, cookie, args.debug) + +if args.mac_table: + maclist = cimclib.getMacAddresses(args.ip, cookie, args.debug) + + for k in sorted(maclist.keys()): + print "{}:".format(k) + for p in sorted(maclist[k].keys()): + print " {} - {}".format(p, maclist[k][p]) + +cimclib.logout(args.ip, cookie) diff --git a/resources/tools/testbed-setup/cimc/cimclib.py b/resources/tools/testbed-setup/cimc/cimclib.py new file mode 100755 index 0000000000..f91832e0c9 --- /dev/null +++ b/resources/tools/testbed-setup/cimc/cimclib.py @@ -0,0 +1,414 @@ +#!/usr/bin/python +# +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import requests +import xml.etree.ElementTree as et +import re + +from requests.packages.urllib3.exceptions import InsecureRequestWarning +requests.packages.urllib3.disable_warnings(InsecureRequestWarning) + +BASEDN = "sys/rack-unit-1" + +### +### Helper function - iterate through a list in pairs +### +def chunks(lst, chunksize): + """Yield successive n-sized chunks from l.""" + for i in range(0, len(lst), chunksize): + yield lst[i:i+chunksize] + +### +### Helper function: Perform an XML request to CIMC +### +def xml_req(ip, xml, debug=False): + if debug: + print "DEBUG: XML-REQUEST:" + et.dump(xml) + headers = {'Content-Type': 'text/xml'} + req = requests.post('https://' + ip + '/nuova', headers=headers, + verify=False, data=et.tostring(xml)) + resp = et.fromstring(req.content) + if debug: + print "DEBUG: XML-RESPONSE:" + et.dump(resp) + + if resp.tag == 'error': + if debug: + print "XML response contains error:" + et.dump(error) + raise RuntimeError('XML response contains error') + return resp + +### +### Authenticate (Log-In) to CIMC and obtain a cookie +### +def login(ip, username, password): + reqxml = et.Element('aaaLogin', + attrib={'inName':username, 'inPassword':password}) + respxml = xml_req(ip, reqxml) + try: + cookie = respxml.attrib['outCookie'] + except: + print "Cannot find cookie in CIMC server response." + print "CIMC server output:" + et.dump(respxml) + raise + + return cookie + +### +### Log out from CIMC. +### +### Note: There is a maximum session limit in CIMC and sessions to take a long +### time (10 minutes) to time out. Therefore, calling this function during +### testing is essential, otherwise one will quickly exhaust all available +### sessions. +### +def logout(ip, cookie): + reqxml = et.Element('aaaLogout', attrib={'cookie': cookie, + 'inCookie': cookie}) + xml_req(ip, reqxml) + +### +### Power off the host +### +def powerOff(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, 'computeRackUnit', + attrib={'adminPower': 'down', 'dn': BASEDN}) + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Power on the host +### +def powerOn(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, 'computeRackUnit', + attrib={'adminPower': 'up', 'dn': BASEDN}) + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Restore BIOS to default settings +### +def restoreBiosDefaultSettings(ip, cookie, debug=False): + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'biosPlatformDefaults'}) + respxml = xml_req(ip, reqxml, debug) + + configs = respxml.find('outConfigs') + defaults = configs.find('biosPlatformDefaults') + + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': "{}/bios/bios-settings".format(BASEDN)}) + inconfig = et.SubElement(reqxml, 'inConfig') + biosset = et.SubElement(inconfig, 'biosSettings') + biosset.extend(defaults) + + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Apply specified BIOS settings. +### +### These must be a list of strings in XML format. Not currently very +### user friendly. Format can either be obtained from CIMC +### documention, or by setting them manually and then fetching +### BIOS settings via CIMC XML API. +### +def setBiosSettings(ip, cookie, settings, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': "{}/bios/bios-settings".format(BASEDN)}) + inconfig = et.SubElement(reqxml, 'inConfig') + biosset = et.SubElement(inconfig, 'biosSettings') + print "Applying settings:" + print settings + for s in settings: + x = et.fromstring(s) + et.dump(x) + biosset.append(et.fromstring(s)) + + respxml = xml_req(ip, reqxml, debug) + return respxml +### +### Delete any existing virtual drives +### +### WARNING: THIS WILL ERASE ALL DATA ON ALL DISKS, WITHOUT ANY CONFIRMATION +### QUESTION. +### +### The server must be POWERED ON for this to succeed. +### +def deleteAllVirtualDrives(ip, cookie, debug=False): + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'storageController'}) + respxml = xml_req(ip, reqxml, debug) + + configs = respxml.find('outConfigs') + for sc in configs.iter('storageController'): + if debug: + print "DEBUG: SC DN {} ID {}".format(sc.attrib['dn'], + sc.attrib['id']) + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': sc.attrib['dn']}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, 'storageController', + attrib={'adminAction': 'delete-all-vds-reset-pds', + 'dn': sc.attrib['dn']}) + xml_req(ip, reqxml, debug) + +### +### Create a single RAID-10 across all drives. +### +### The server must be POWERED ON for this to succeed. +### +def createRaid10_all(ip, cookie, debug=False): + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'storageController'}) + respxml = xml_req(ip, reqxml, debug) + + configs = respxml.find('outConfigs') + for sc in configs.iter('storageController'): + if debug: + print "DEBUG: SC DN {} ID {}".format(sc.attrib['dn'], + sc.attrib['id']) + # + # Find disk size and number of disks + # + disks = [] + total_size = 0 + for pd in sc.iter('storageLocalDisk'): + if debug: + print "DEBUG: PD {} size {}".format(pd.attrib['id'], + pd.attrib['coercedSize']) + disks.append(pd.attrib['id']) + total_size += int(pd.attrib['coercedSize'].split(' ')[0]) + + # + # Create a RAID10 array of all available disks, as in: + # [1,2][3,4][5,6][7,8][9,10][11,12][13,14][15,16][17,18] + # + raid_size = total_size/2 + raid_span = '' + for p in list(chunks(disks, 2)): + raid_span += "[{},{}]".format(p[0], p[1]) + + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': sc.attrib['dn']}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, + 'storageVirtualDriveCreatorUsingUnusedPhysicalDrive', + attrib={'virtualDriveName': 'raid10-all', + 'size': str(raid_size)+' MB', + 'raidLevel': '10', 'driveGroup': raid_span, + 'adminState': 'trigger'}) + + xml_req(ip, reqxml, debug) + +### +### Create a single RAID across from empty drives as provided. +### +### The server must be POWERED ON for this to succeed. +### +def createRaid(ip, cookie, name, raidlevel, size, drives, debug=False): + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'storageController'}) + respxml = xml_req(ip, reqxml, debug) + + configs = respxml.find('outConfigs') + for sc in configs.iter('storageController'): + if debug: + print "DEBUG: SC DN {} ID {}".format(sc.attrib['dn'], + sc.attrib['id']) + + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': sc.attrib['dn']}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, + 'storageVirtualDriveCreatorUsingUnusedPhysicalDrive', + attrib={'virtualDriveName': name, + 'size': str(size)+' MB', + 'raidLevel': raidlevel, + 'driveGroup': drives, + 'adminState': 'trigger'}) + + xml_req(ip, reqxml, debug) + +### +### Enable Serial-Over-LAN (SOL) console and redirect BIOS output to +### serial console +### +def enableConsoleRedir(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': "{}/bios/bios-settings".format(BASEDN)}) + inconfig = et.SubElement(reqxml, 'inConfig') + bs = et.SubElement(inconfig, 'biosSettings', + attrib={'dn': "{}/bios/bios-settings".format(BASEDN)}) + et.SubElement(bs, + 'biosVfConsoleRedirection', + attrib={'vpConsoleRedirection': 'com-0', + 'vpBaudRate': '115200'}) + respxml = xml_req(ip, reqxml, debug) + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN+'/sol-if'}) + inconfig = et.SubElement(reqxml, 'inConfig') + et.SubElement(inconfig, 'solIf', + attrib={'dn': BASEDN+'/sol-if', 'adminState': 'enable', + 'speed': '115200', 'comport': 'com0'}) + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Boot into UEFI bootloader (we may use this to "park" the host in +### powered-on state) +### +def bootIntoUefi(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN+'/boot-policy'}) + inconfig = et.SubElement(reqxml, 'inConfig') + bootDef = et.SubElement(inconfig, 'lsbootDef', + attrib={'dn': BASEDN+'/boot-policy', + 'rebootOnUpdate': 'yes'}) + et.SubElement(bootDef, 'lsbootEfi', + attrib={'rn': 'efi-read-only', 'order': '1', + 'type': 'efi'}) + + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Boot via PXE. Reboot immediately. +### +def bootPXE(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN+'/boot-policy'}) + inconfig = et.SubElement(reqxml, 'inConfig') + bootDef = et.SubElement(inconfig, 'lsbootDef', + attrib={'dn': BASEDN+'/boot-policy', + 'rebootOnUpdate': 'yes'}) + et.SubElement(bootDef, 'lsbootLan', + attrib={'rn': 'lan-read-only', 'order': '1', + 'type': 'lan', 'prot': 'pxe'}) + + respxml = xml_req(ip, reqxml, debug) + return respxml + + +### +### Boot via Local HDD first, then via PXE. Do not reboot immediately. +### +def bootHDDPXE(ip, cookie, debug=False): + reqxml = et.Element('configConfMo', + attrib={'cookie': cookie, 'inHierarchical': 'false', + 'dn': BASEDN+'/boot-policy'}) + inconfig = et.SubElement(reqxml, 'inConfig') + bootDef = et.SubElement(inconfig, 'lsbootDef', + attrib={'dn': BASEDN+'/boot-policy', + 'rebootOnUpdate': 'no'}) + storage = et.SubElement(bootDef, 'lsbootStorage', + attrib={'rn': 'storage-read-write', + 'access': 'read-write', + 'order': '1', 'type': 'storage'}) + et.SubElement(storage, 'lsbootLocalStorage', + attrib={'rn': 'local-storage'}) + et.SubElement(bootDef, 'lsbootLan', + attrib={'rn': 'lan-read-only', 'order': '2', + 'type': 'lan', 'prot': 'pxe'}) + + respxml = xml_req(ip, reqxml, debug) + return respxml + +### +### Return LOM port 1 MAC address +### +def getLOMMacAddress(ip, cookie, debug=False): + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'networkAdapterUnit'}) + respxml = xml_req(ip, reqxml, debug) + reqxml = et.Element('configResolveDn', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'dn': BASEDN+'/network-adapter-L/eth-1'}) + respxml = xml_req(ip, reqxml, debug) + + oc = respxml.find('outConfig') + netw = oc.find('networkAdapterEthIf') + if debug: + print "DEBUG: MAC address is {}".format(netw.get('mac')) + return netw.get('mac') + +### +### Return all port MAC addresses +### +def getMacAddresses(ip, cookie, debug=False): + maclist = {} + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'networkAdapterUnit'}) + respxml = xml_req(ip, reqxml, debug) + oc = respxml.find('outConfigs') + for adapter in oc.iter('networkAdapterUnit'): + if debug: + print "DEBUG: ADAPTER SLOT {} MODEL {}".format(adapter.attrib['slot'], + adapter.attrib['model']) + slot = adapter.attrib['slot'] + maclist[slot] = {} + for port in adapter.iter('networkAdapterEthIf'): + if debug: + print "DEBUG: SLOT {} PORT {} MAC {}".format(slot, + port.attrib['id'], + port.attrib['mac']) + maclist[slot][port.attrib['id']] = port.attrib['mac'].lower() + + reqxml = et.Element('configResolveClass', + attrib={'cookie': cookie, 'inHierarchical': 'true', + 'classId': 'adaptorUnit'}) + respxml = xml_req(ip, reqxml, debug) + oc = respxml.find('outConfigs') + for adapter in oc.iter('adaptorUnit'): + if debug: + print "DEBUG: VIC ADAPTER SLOT {} MODEL {}".format(adapter.attrib['pciSlot'], + adapter.attrib['model']) + slot = adapter.attrib['pciSlot'] + maclist[slot] = {} + for port in adapter.iter('adaptorHostEthIf'): + portnum = int(re.sub('eth([0-9]+)', '\\1', port.attrib['name']))+1 + if debug: + print "DEBUG: VIC SLOT {} PORT {} MAC {}".format(slot, + portnum, + port.attrib['mac']) + maclist[slot][portnum] = port.attrib['mac'].lower() + + return maclist diff --git a/resources/tools/testbed-setup/ks.cfg b/resources/tools/testbed-setup/ks.cfg new file mode 100644 index 0000000000..6759b1f6e5 --- /dev/null +++ b/resources/tools/testbed-setup/ks.cfg @@ -0,0 +1,81 @@ +# +#Generic Kickstart template for Ubuntu +#Platform: x86 and x86-64 +# + +#System language +lang en_US + +#Language modules to install +langsupport en_US + +#System keyboard +keyboard us + +#System mouse +mouse + +#System timezone +timezone America/Los_Angeles + +#Root password +rootpw --disabled + +#Initial user (user with sudo capabilities) +user testuser --fullname "Test User" --password Cisco1234 + +#Reboot after installation +reboot + +#Use text mode install +text + +#Install OS instead of upgrade +install + +#Installation media +#cdrom +#nfs --server=server.com --dir=/path/to/ubuntu/ +url --url http://10.30.51.28/ubuntu + +#System bootloader configuration +bootloader --location=mbr + +#Clear the Master Boot Record +zerombr yes + +#Partition clearing information +clearpart --all --initlabel + +#Basic disk partition +part /boot --fstype ext4 --size 256 --asprimary +part / --fstype ext4 --size 1 --grow --asprimary +part swap --size 1024 + +#Advanced partition +#part /boot --fstype=ext4 --size=500 --asprimary +#part pv.aQcByA-UM0N-siuB-Y96L-rmd3-n6vz-NMo8Vr --grow --size=1 +#volgroup vg_mygroup --pesize=4096 pv.aQcByA-UM0N-siuB-Y96L-rmd3-n6vz-NMo8Vr +#logvol / --fstype=ext4 --name=lv_root --vgname=vg_mygroup --grow --size=10240 --maxsize=20480 +#logvol swap --name=lv_swap --vgname=vg_mygroup --grow --size=1024 --maxsize=8192 + +#System authorization infomation +auth --useshadow --enablemd5 + +#Network information +network --bootproto=dhcp + +#Firewall configuration +firewall --disabled --ssh + +#Do not configure the X Window System +skipx + +### + +preseed live-installer/net-image string http://10.30.51.28/ubuntu/install/filesystem.squashfs +preseed user-setup/allow-password-weak boolean true + + +%packages +openssh-server diff --git a/resources/tools/testbed-setup/playbooks/01-host-setup.yaml b/resources/tools/testbed-setup/playbooks/01-host-setup.yaml new file mode 100644 index 0000000000..bc7eb861db --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/01-host-setup.yaml @@ -0,0 +1,79 @@ +--- +- hosts: all + remote_user: testuser + sudo: yes + tasks: + - name: copy sudoers file + copy: src=files/sudoers dest=/etc/sudoers.d/testuser owner=root group=root mode=660 + - name: copy hosts file + template: src=files/hosts dest=/etc/hosts owner=root group=root mode=644 + - name: copy hostname file + template: src=files/hostname dest=/etc/hostname owner=root group=root mode=644 + - name: interfaces file + template: src=files/interfaces dest=/etc/network/interfaces owner=root group=root mode=644 + - name: copy ttyS0 file + template: src=files/ttyS0 dest=/etc/init/ttyS0.conf owner=root group=root mode=644 + - name: start ttyS0 + service: name=ttyS0 state=started + - name: copy grub file + template: src=files/grub dest=/etc/default/grub owner=root group=root mode=644 + - name: update grub + command: update-grub + - name: copy apt sources file + template: src=files/apt-sources.list dest=/etc/apt/sources.list + - name: update repositories + apt: update_cache=yes + - name: install git + apt: name=git state=present + - name: install crudini + apt: name=crudini state=present + - name: install expect + apt: name=expect state=present +- hosts: virl + remote_user: testuser + sudo: yes + tasks: + - name: Add VIRL user + user: name=virl shell=/bin/bash comment="VIRL user" password="$6$mJPlK5FKLar6$xxXPP0LRhC7T1yhHtym18Z3nKZweTtfTxzi1WpvVHJ0U/Em1UWcHqfMhRApFp0rsY9jHRuL6FfeFbKPN..uDK." + - name: Add VIRL user to sudoers + copy: src=files/sudoers_virl dest=/etc/sudoers.d/virl owner=root group=root mode=660 + - name: Set VIRL user authorized key + authorized_key: user=virl key="{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" + - name: install qemu (as a workaround) + apt: name=qemu-system-x86 state=present +- hosts: tg:sut + remote_user: testuser + sudo: yes + tasks: + - name: Install cpufrequtils + apt: name=cpufrequtils state=present + - name: Set cpufrequtils defaults + copy: src=files/cpufrequtils dest=/etc/default/cpufrequtils owner=root group=root mode=0644 + - name: Disable IRQ load balancing + copy: src=files/irqbalance dest=/etc/default/irqbalance owner=root group=root mode=0644 + - name: Disable ondemand + shell: update-rc.d ondemand disable + - name: Install 4.2 kernel + apt: name=linux-generic-lts-xenial state=present +- hosts: tg + remote_user: testuser + sudo: yes + tasks: + - name: Install zlib1g-dev + apt: name=zlib1g-dev state=present + - name: Install unzip + apt: name=unzip state=present + - name: pstate parameter + lineinfile: dest=/etc/default/grub regexp=^GRUB_CMDLINE_LINUX= line=GRUB_CMDLINE_LINUX="\"intel_pstate=disable\"" + - name: update grub + command: update-grub +- hosts: sut + remote_user: testuser + sudo: yes + tasks: + - name: Install dkms + apt: name=dkms state=present + - name: isolcpus and pstate parameter + lineinfile: dest=/etc/default/grub regexp=^GRUB_CMDLINE_LINUX= line=GRUB_CMDLINE_LINUX="\"isolcpus={{ isolcpus }} intel_pstate=disable\"" + - name: update grub + command: update-grub diff --git a/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml b/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml new file mode 100644 index 0000000000..037f07a8fd --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/02-virl-bootstrap.yaml @@ -0,0 +1,109 @@ +--- +- hosts: virl + remote_user: virl + tasks: + - name: install virl-bootstrap + git: repo=https://github.com/VIRL-Open/virl-bootstrap.git + dest=/home/virl/virl-bootstrap + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=hostname value={{ hostname }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=domain_name value=linuxfoundation.org + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=using_dhcp_on_the_public_port value=False + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=public_port value={{ ansible_default_ipv4["interface"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=Static_IP value={{ ansible_default_ipv4["address"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=public_network value={{ ansible_default_ipv4["network"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=public_netmask value={{ ansible_default_ipv4["netmask"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=public_gateway value={{ ansible_default_ipv4["gateway"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=proxy value=False + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=ntp_server value=pool.ntp.org + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=first_nameserver value=199.204.44.24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=second_nameserver value=199.204.47.54 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=salt_master value=us-1.virl.info,us-2.virl.info,us-4.virl.info + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=salt_id value={{ hostname }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=salt_domain value=linuxfoundation.org + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=salt_masterless value=false + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_port value={{ ansible_default_ipv4["interface"] }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_network value=10.30.51.0/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_mask value=255.255.255.0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_network_gateway value=10.30.51.1 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_start_address value={{ virl_l2_start }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_end_address value={{ virl_l2_end }} + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_address value={{ ansible_default_ipv4["address"] }}/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=first_flat_nameserver value=199.204.44.24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=second_flat_nameserver value=199.204.47.54 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_port2_enabled value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_port2 value=dummy0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_network2 value=172.16.2.0/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_mask2 value=255.255.255.0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_network_gateway2 value=172.16.2.1 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_start_address2 value=172.16.2.50 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_end_address2 value=172.16.2.253 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l2_address2 value=172.16.2.254/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=first_flat2_nameserver value=199.204.44.24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=second_flat2_nameserver value=199.204.47.54 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_port value=dummy1 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_network value=172.16.3.0/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_mask value=255.255.255.0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_network_gateway value=172.16.3.1 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_floating_start_address value=172.16.3.50 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_floating_end_address value=172.16.3.253 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=l3_address value=172.16.3.254/24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=first_snat_nameserver value=199.204.44.24 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=second_snat_nameserver value=199.204.47.54 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=ramdisk value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=ank value=19401 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=ank_live value=19402 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=virl_webservices value=19399 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=virl_user_management value=19400 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=virl_apache_port value=80 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=virl_webmux value=19403 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=Start_of_serial_port_range value=17000 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=End_of_serial_port_range value=18000 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=serial_port value=19406 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vnc_port value=19407 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=location_region value=US + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vnc value=False + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=guest_account value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=user_list value=tb4-virl:Cisco1234 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=uwmadmin_password value=Cisco1234 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=password value=password + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=mysql_password value=password + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=keystone_service_token value=fkgjhsdflkjh + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=enable_cinder value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=cinder_file value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=cinder_size value=20000 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=cinder_location value=/var/lib/cinder/cinder-volumes.lvm + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=dummy_int value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=this_node_is_the_controller value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_controller_hostname value=controller + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_controller_IP value=172.16.10.250 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_port value=dummy2 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_IP value=172.16.10.250 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_network value=172.16.10.0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_netmask value=255.255.255.0 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=internalnet_gateway value=172.16.10.1 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=iosv value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=csr1000v value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=iosxrv432 value=False + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=iosxrv52 value=False + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=iosxrv value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=nxosv value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vpagent value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=iosvl2 value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=asav value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=lxc_server value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=lxc_iperf value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=lxc_routem value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=lxc_ostinato value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=server value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vmm_mac value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vmm_win32 value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vmm_win64 value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=vmm_linux value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=virl_clients value=True + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=ram_overcommit value=2 + - ini_file: dest=/home/virl/virl-bootstrap/vsettings.ini section=DEFAULT option=web_editor value=True + - name: copy vsetting file to /etc + sudo: yes + shell: cp /home/virl/virl-bootstrap/vsettings.ini /etc/virl.ini + - name: copy vinstall bootstrap wrapper script + template: src=files/virl/virl-bootstrap-wrapper dest=/home/virl/virl-bootstrap/virl-bootstrap-wrapper owner=virl group=virl mode=775 diff --git a/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml b/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml new file mode 100644 index 0000000000..59bcfe9d65 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml @@ -0,0 +1,79 @@ +--- +- hosts: virl + remote_user: testuser + sudo: yes + tasks: + - name: Add jenkins-in user + user: name=jenkins-in shell=/bin/bash comment="Jenkins user" + - name: Add jenkins-in user to sudoers + copy: src=files/sudoers_jenkins-in dest=/etc/sudoers.d/jenkins-in owner=root group=root mode=660 + - name: Set Jenkins user authorized key + authorized_key: user=jenkins-in key="{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" + - name: copy salt states for dnsmasq and nfs + synchronize: src=files/salt/ dest=/ + - name: install NFS salt + shell: salt-call --local state.sls ckoester.nfs-server + - name: NFS symlink + shell: ln -s /nfs/scratch /scratch + args: + creates: /scratch + - name: upate Nova CPU mode + ini_file: dest=/etc/nova/nova.conf section=libvirt option=cpu_mode value=host-passthrough + - name: Restart nova-compute service + service: name=nova-compute state=restarted + - name: Permit SSH user environment + lineinfile: dest=/etc/ssh/sshd_config state=present regexp='PermitUserEnvironment.*' line='PermitUserEnvironment yes' + - name: Restart SSH daemon + service: name=ssh state=restarted +- hosts: virl + remote_user: jenkins-in + tasks: + - name: clone csit git repository + git: repo=https://gerrit.fd.io/r/csit + dest=/home/jenkins-in/git/csit + - name: Link testcase-infra directory + command: ln -sf /home/jenkins-in/git/csit/resources/tools/virl /home/jenkins-in/testcase-infra + args: + creates: /home/jenkins-in/testcase-infra + - name: Create bin directory + file: path=/home/jenkins-in/bin state=directory mode=0755 + - name: Link start-testcase executable + command: ln -sf /home/jenkins-in/testcase-infra/bin/start-testcase /home/jenkins-in/bin/start-testcase + args: + creates: /home/jenkins-in/bin/start-testcase + - name: Link stop-testcase executable + command: ln -sf /home/jenkins-in/testcase-infra/bin/stop-testcase /home/jenkins-in/bin/stop-testcase + args: + creates: /home/jenkins-in/bin/stop-testcase + - name: Link kill-idle-testcases executable + command: ln -sf /home/jenkins-in/testcase-infra/bin/kill-idle-testcases /home/jenkins-in/bin/kill-idle-testcases + args: + creates: /home/jenkins-in/bin/kill-idle-testcases + - name: Copy SSH private key + copy: src=files/virl/id_rsa_virl dest=/home/jenkins-in/.ssh/id_rsa_virl mode=600 + - name: Copy SSH public key + copy: src=files/virl/id_rsa_virl.pub dest=/home/jenkins-in/.ssh/id_rsa_virl.pub mode=644 + - name: Copy SSH environment + copy: src=files/virl/ssh_environment dest=/home/jenkins-in/.ssh/environment mode=644 + - name: Add ~/bin to path + lineinfile: dest=/home/jenkins-in/.bashrc state=present line='PATH=${HOME}/bin:$PATH' + - name: Update own IP address in start script + shell: sed -i /home/jenkins-in/testcase-infra/bin/start-testcase -e 's/10.30.51.28/{{ ansible_default_ipv4["address"] }}/' + - name: Add authorized key + lineinfile: dest=/home/jenkins-in/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQD4gderzsZyoxHULjuvPHoJuKnkaGrykqtuoqs/k1/jUdxitPoY5eX2cVYqww7MiUif7zLsiXbt5mHtyxAYCluDxAuIcy1xgSZY3MpmmSqDie4A/FdVfCUqCcpf3TZKsRP0an1MNrKIe0JFZV+uU889IDRQRdboGMs3+4cn5b9fOutpv71qwFVrTm9PZbqfQonrrN8Jp4Mz3XaZDpK22xwDAWhYOZ0eV6CJWquUgbYAHE6/HHMvd0zeJKaWZCXO/1tOGOj6cjgoViHqbnCtmYCjmv/ir0IglzbUdWdOqQY5YkhnPonveV48lVKrmBipqgbDezAUQD8wOQ7HttpYpKgt jenkins-in@tb4-virl' +# All of the below will fail if VIRL user/project already exist +- hosts: virl + remote_user: virl + tasks: + - name: Create VIRL project + shell: virl_uwm_client project-create --name tb4-virl --enabled True --user-password Cisco1234 + ignore_errors: true +# - name: Delete VIRL project user +# shell: virl_uwm_client user-delete --name tb4-virl +# ignore_errors: true +# - name: Recreate VIRL project user +# shell: virl_uwm_client user-create --name tb4-virl --role admin --project tb4-virl --set-password Cisco1234 +# ignore_errors: true + - name: Create VPP flavor + shell: virl_uwm_client flavor-create --name vPP --ram 4096 --vcpus 2 --disk 0 + ignore_errors: true diff --git a/resources/tools/testbed-setup/playbooks/04-disk-image.yaml b/resources/tools/testbed-setup/playbooks/04-disk-image.yaml new file mode 100644 index 0000000000..884a8db65b --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/04-disk-image.yaml @@ -0,0 +1,11 @@ +--- +- hosts: virl + remote_user: virl + tasks: + - name: Create server image directory + file: path=/home/virl/virl-server-image state=directory mode=0755 + - name: Copy server image + copy: src=files/virl-server-image/server.qcow2 dest=/home/virl/virl-server-image/server.qcow2 mode=644 +# TODO: Need to make this conditional, and find a good source for the image. + - name: Import server image into glance + shell: virl_uwm_client image-create --subtype server --version java-nested --release 14.04.03 --image-on-server /home/virl/virl-server-image/server.qcow2 diff --git a/resources/tools/testbed-setup/playbooks/05-ckoester.yaml b/resources/tools/testbed-setup/playbooks/05-ckoester.yaml new file mode 100644 index 0000000000..02d632e78c --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/05-ckoester.yaml @@ -0,0 +1,17 @@ +- hosts: virl + remote_user: jenkins-in + tasks: + - name: Copy some VPP packages across for testing + synchronize: src=/home/jenkins-in/vpp-pkgs dest=/home/jenkins-in/ + - name: Install Carsten's public key + lineinfile: dest=/home/jenkins-in/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDiXwDJc8sFpMrn/pEtaT9Ug6BmkFDtJVOX1bCPZWyg650IUBgrIo9cEcpwJNI53p4roTsUmOcYA391jaC5Z9cH5JngUFH0OlyLGdbzlKREzD7PeKGGn7RQFDhZS+L7I+9ayaTn+RJi5EI6b/uWeP0tEvCrFDRJJPu3I9Ohgkbc7CfzeXuX57t9rMbYduvsDpOLQ6s14mSy6T7qGexyE5mQIkSZ4XfWxOuT1nDvMsIw7ej86pKXE/faqvKczoqMa9SUnxo27b4Oe62+KlGt0iXDCYvK9tiDOU8Mi/ZGOM1k2utZOVeD4r7b8rWFbX1aw35roPUPdFEH+ROUGPljrlJT cloud-user@test-ubuntu-1404' +- hosts: virl + remote_user: virl + tasks: + - name: Install Carsten's public key + lineinfile: dest=/home/virl/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDiXwDJc8sFpMrn/pEtaT9Ug6BmkFDtJVOX1bCPZWyg650IUBgrIo9cEcpwJNI53p4roTsUmOcYA391jaC5Z9cH5JngUFH0OlyLGdbzlKREzD7PeKGGn7RQFDhZS+L7I+9ayaTn+RJi5EI6b/uWeP0tEvCrFDRJJPu3I9Ohgkbc7CfzeXuX57t9rMbYduvsDpOLQ6s14mSy6T7qGexyE5mQIkSZ4XfWxOuT1nDvMsIw7ej86pKXE/faqvKczoqMa9SUnxo27b4Oe62+KlGt0iXDCYvK9tiDOU8Mi/ZGOM1k2utZOVeD4r7b8rWFbX1aw35roPUPdFEH+ROUGPljrlJT cloud-user@test-ubuntu-1404' +- hosts: virl + remote_user: testuser + tasks: + - name: Install Carsten's public key + lineinfile: dest=/home/testuser/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDiXwDJc8sFpMrn/pEtaT9Ug6BmkFDtJVOX1bCPZWyg650IUBgrIo9cEcpwJNI53p4roTsUmOcYA391jaC5Z9cH5JngUFH0OlyLGdbzlKREzD7PeKGGn7RQFDhZS+L7I+9ayaTn+RJi5EI6b/uWeP0tEvCrFDRJJPu3I9Ohgkbc7CfzeXuX57t9rMbYduvsDpOLQ6s14mSy6T7qGexyE5mQIkSZ4XfWxOuT1nDvMsIw7ej86pKXE/faqvKczoqMa9SUnxo27b4Oe62+KlGt0iXDCYvK9tiDOU8Mi/ZGOM1k2utZOVeD4r7b8rWFbX1aw35roPUPdFEH+ROUGPljrlJT cloud-user@test-ubuntu-1404' diff --git a/resources/tools/testbed-setup/playbooks/files/apt-sources.list b/resources/tools/testbed-setup/playbooks/files/apt-sources.list new file mode 100644 index 0000000000..b8ed057e14 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/apt-sources.list @@ -0,0 +1,61 @@ +# deb http://us.archive.ubuntu.com/ubuntu/ trusty main restricted + +# deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted +# deb http://security.ubuntu.com/ubuntu trusty-security main restricted + +# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to +# newer versions of the distribution. +deb http://us.archive.ubuntu.com/ubuntu/ trusty main restricted +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty main restricted + +## Major bug fix updates produced after the final release of the +## distribution. +deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted + +## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu +## team. Also, please note that software in universe WILL NOT receive any +## review or updates from the Ubuntu security team. +deb http://us.archive.ubuntu.com/ubuntu/ trusty universe +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty universe +deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates universe +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates universe + +## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu +## team, and may not be under a free licence. Please satisfy yourself as to +## your rights to use the software. Also, please note that software in +## multiverse WILL NOT receive any review or updates from the Ubuntu +## security team. +deb http://us.archive.ubuntu.com/ubuntu/ trusty multiverse +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty multiverse +deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse + +## N.B. software from this repository may not have been tested as +## extensively as that contained in the main release, although it includes +## newer versions of some applications which may provide useful features. +## Also, please note that software in backports WILL NOT receive any review +## or updates from the Ubuntu security team. +deb http://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse +deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse + +deb http://security.ubuntu.com/ubuntu trusty-security main restricted +deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted +deb http://security.ubuntu.com/ubuntu trusty-security universe +deb-src http://security.ubuntu.com/ubuntu trusty-security universe +deb http://security.ubuntu.com/ubuntu trusty-security multiverse +deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse + +## Uncomment the following two lines to add software from Canonical's +## 'partner' repository. +## This software is not part of Ubuntu, but is offered by Canonical and the +## respective vendors as a service to Ubuntu users. +# deb http://archive.canonical.com/ubuntu trusty partner +# deb-src http://archive.canonical.com/ubuntu trusty partner + +## Uncomment the following two lines to add software from Ubuntu's +## 'extras' repository. +## This software is not part of Ubuntu, but is offered by third-party +## developers who want to ship their latest software. +# deb http://extras.ubuntu.com/ubuntu trusty main +# deb-src http://extras.ubuntu.com/ubuntu trusty main diff --git a/resources/tools/testbed-setup/playbooks/files/cpufrequtils b/resources/tools/testbed-setup/playbooks/files/cpufrequtils new file mode 100644 index 0000000000..03070fefe1 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/cpufrequtils @@ -0,0 +1 @@ +GOVERNOR="performance" diff --git a/resources/tools/testbed-setup/playbooks/files/grub b/resources/tools/testbed-setup/playbooks/files/grub new file mode 100644 index 0000000000..d4e27b3f0f --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/grub @@ -0,0 +1,34 @@ +# If you change this file, run 'update-grub' afterwards to update +# /boot/grub/grub.cfg. +# For full documentation of the options in this file, see: +# info -f grub -n 'Simple configuration' + +GRUB_DEFAULT=0 +GRUB_TIMEOUT=10 +GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` +GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,115200n8" +GRUB_CMDLINE_LINUX="" + +# Uncomment to enable BadRAM filtering, modify to suit your needs +# This works with Linux (no patch required) and with any kernel that obtains +# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) +#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" + +# Uncomment to disable graphical terminal (grub-pc only) +#GRUB_TERMINAL=console +GRUB_TERMINAL=serial +GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1" + +# The resolution used on graphical terminal +# note that you can use only modes which your graphic card supports via VBE +# you can see them in real GRUB with the command `vbeinfo' +#GRUB_GFXMODE=640x480 + +# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux +#GRUB_DISABLE_LINUX_UUID=true + +# Uncomment to disable generation of recovery mode menu entries +#GRUB_DISABLE_RECOVERY="true" + +# Uncomment to get a beep at grub start +#GRUB_INIT_TUNE="480 440 1" diff --git a/resources/tools/testbed-setup/playbooks/files/hostname b/resources/tools/testbed-setup/playbooks/files/hostname new file mode 100644 index 0000000000..56baac7265 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/hostname @@ -0,0 +1 @@ +{{ hostname }} diff --git a/resources/tools/testbed-setup/playbooks/files/hosts b/resources/tools/testbed-setup/playbooks/files/hosts new file mode 100644 index 0000000000..82dee7b4f7 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/hosts @@ -0,0 +1,7 @@ +127.0.0.1 localhost +{{ ansible_default_ipv4["address"] }} {{ hostname }}.linuxfoundation.org {{ hostname }} + +# The following lines are desirable for IPv6 capable hosts +::1 localhost ip6-localhost ip6-loopback +ff02::1 ip6-allnodes +ff02::2 ip6-allrouters diff --git a/resources/tools/testbed-setup/playbooks/files/interfaces b/resources/tools/testbed-setup/playbooks/files/interfaces new file mode 100644 index 0000000000..734d8cd18f --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/interfaces @@ -0,0 +1,14 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +# The loopback network interface +auto lo +iface lo inet loopback + +# The primary network interface +auto {{ ansible_default_ipv4["interface"] }} +iface {{ ansible_default_ipv4["interface"] }} inet static + address {{ ansible_default_ipv4["address"] }} + netmask {{ ansible_default_ipv4["netmask"] }} + gateway {{ ansible_default_ipv4["gateway"] }} + dns-nameservers 199.204.44.24 199.204.47.54 diff --git a/resources/tools/testbed-setup/playbooks/files/irqbalance b/resources/tools/testbed-setup/playbooks/files/irqbalance new file mode 100644 index 0000000000..84fb5f17e2 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/irqbalance @@ -0,0 +1,6 @@ +#Configuration for the irqbalance daemon + +#Should irqbalance be enabled? +ENABLED="0" +#Balance the IRQs only once? +ONESHOT="0" diff --git a/resources/tools/testbed-setup/playbooks/files/salt.b64 b/resources/tools/testbed-setup/playbooks/files/salt.b64 new file mode 100644 index 0000000000..5e76a8583b --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt.b64 @@ -0,0 +1,27 @@ +H4sIAF7JK1cAA+1a32/bNhD2a/RXcMmDkyGy9VuDsQwDhhUoNuxhHfbSFQYj0TZrSVRJyklQ9H/f +UZZsGbUj27HVduOXBzvkmUfyuzveURI4kcPeeWEBwtBXn3boW83PGj3bCS3P9v3QcnuW7YJAD/ln +nleJQkjMEeolLMIJjlOabZdr6/9GIRT/gi/OaQOH8O+HgeI/8GzNfxdY8S/OFwgO598LLE/z3wU2 ++Y/mjAhJ+GkNoeTf34d/LwwskLPB/V3NfxfYwX82EaYgfEH4QCTihToUwYFl7eTfBrJr/l0X+Hds +R/FvnWSFLfif80+zKCliMjIQMlFN/6BBP81gg5JkZ3/EsgmdFpwYX3opGkdgh//HmUix+HAC5++1 ++7/lr+O/4zng/5YfeNr/u8B2/6/p1879X0fr+X+CVHD//M9XH8r/IRHU+V8XaOd/FQOOPgza4n/o +N/j3FP+uHdo6/ncBxbQK/hOakEFMOYkk40+qRR0IBdjACHHGZNUw5azIN1pSBqcHAvc2DDXWUEQc +y2h2gjHtMAyrQTlrG29BebI5XqOlOUcioyF5zBmX63WnOMNTEo82xAPPq/6XJM0TLKHtPc3e46pV +sIJH0HapPGc03Oo7anRRq7s0DOgaL7vGvMgymk2VTtVCIzJoNCkFGU5heDXanPCMJNWghlHkMcxm +3FhFlMbq15u/XPZPBDI53nl+t/t/VQC8IBUs/d/zdtd/QbjK/3xL5X9OoOK/9v/z4zPzQhXfypby ++bSu/9beIeY0H4MgnTyN0F+8IFU7JxNOxGyEXuFEkBYb/tLL1qjQ7v/LGPYSHeUZ/1z9t87/LNsK +1P2PH+j7v06wL//VYXOUjpb4D1lf2OBfxX/XcXT93wmu0EZGhOSMIBxFRAgEib/kLEEJFRJNGC9z +JfEE9pEK9DCj0Qyl+AndkyrTILFxdXEhGfrj1RsUJZRkUgwQekNqAXHt3wyMK+MK/fqIIaUi5agg +vXAQzuLymzuC7tIgZywlAi0xY0Kqo8S+5g+34imLbjM2FsW95ISMoxmJ5jcrGeeasx0yW3V7K41g +9F6lEE2FGM75vU9XGieCxnfWbcSZEGkmt42+Hqae/efDbJtUM3G++PgRKV98289pkmA+mBLZf3fd +V+nsKHHGGZEPjM/7t5XUlGM4omupDYG+HToDOxjYA2voeH10c4M+fVITgTmobHssPhRYzLbs5X5z +cFon4TRm4Zx2Fm7bTrhbdsI9dA51+XFx8b0yq1bxL+3OB+P5+9/TPAc85Pmf44Xq/sfS5383aOH/ +5Zc/vfb7Hyewa/4D2/JU/ed7vj7/u0B5+tOMymHzzv9MNyO1VS1TyqbCS6PtHqSS/vYi7NeNFv9/ +efHXO6T+g/iv3v9zbNvT8b8T7MV/01OP0NFW/4V2UPPvh56t6j/f0vVfJ7hCC5qOBIEKT94VudoM +iaS4cxCRIyMmUJXQXFKWocu/X//5ex2GLw1cyBlUUJe/YA4Wk6HflpaDfqxt6OeIioiBzaQ/QXRf +DgzDQHBPyIIk6K3jev476GD5Zvt3yw6DE5Hjh8wwyCOJ0LAQfCjuaVZbIzJj9I9R12sm3rNoGU/h +vHrAT621S0NwXUhBYlJVDy/R3V44NSXXBdRR2t19V75NcF04bddtZsxUhbdYfgXKWLKA70JyGkmT +8RhMwjSBttikGVjFBEdECZPHiORy3XaXMGjNaWyqkHM3lGk+VPM369gDXSCgItBSYmMWy6uqu+f2 +YULBTscql1gK79iFLWL9HwblX//z1e+hVxCYc9yueJvcM5pjlsKv71hO1P18NC/D0xHJURn2VQ54 ++tCyQnn+H/j+t+Xo878LrPj/ut7/Lus/zf/5sck/rA6O+kF8hve/D+I/cAJL898FdvAvIYUrV3xs +zt9E2/N/y6uf/7hh4Dtl/aff/+4GKpcq77TL90jQPRZkee+CTLSuC/Wti4aGhoaGhoaGhoaGhoaG +hoaGhoaGhsa3hH8BeOCWxQBQAAA= diff --git a/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf b/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf new file mode 100644 index 0000000000..fce910cc0b --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt/etc/salt/minion.d/testlocal.conf @@ -0,0 +1,3 @@ +file_roots: + base: + - /srv/salt/ diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls new file mode 100644 index 0000000000..bf3e47f9b3 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server.sls @@ -0,0 +1,3 @@ +include: + - ckoester.nfs-server.install + - ckoester.nfs-server.configure diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls new file mode 100644 index 0000000000..ce362a38b2 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/configure.sls @@ -0,0 +1,31 @@ +/nfs: + file.directory: + - user: root + - group: root + - mode: 755 + +/nfs/scratch: + file.directory: + - user: root + - group: root + - mode: 1777 + +/nfs/ro: + file.directory: + - user: virl + - group: virl + - mode: 755 + +/etc/exports: + file.managed: + - mode: 644 + - template: jinja + - source: "salt://ckoester/nfs-server/files/exports" + +nfs_server_running: + service.running: + - name: nfs-kernel-server + +update_exports: + cmd.run: + - name: exportfs -ra diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports new file mode 100644 index 0000000000..23802be486 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/files/exports @@ -0,0 +1,12 @@ +# /etc/exports: the access control list for filesystems which may be exported +# to NFS clients. See exports(5). +# +# Example for NFSv2 and NFSv3: +# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) +# +# Example for NFSv4: +# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) +# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) +# +/nfs/scratch {{ salt['pillar.get']('virl:l2_network', salt['grains.get']('l2_network', '172.16.1.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l2_network2', salt['grains.get']('l2_network2', '172.16.2.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l3_network', salt['grains.get']('l3_network', '172.16.3.0/24' )) }}(rw,no_root_squash,no_subtree_check) +/nfs/ro *(ro,no_root_squash,no_subtree_check) diff --git a/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls new file mode 100644 index 0000000000..0f136346f8 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/salt/srv/salt/ckoester/nfs-server/install.sls @@ -0,0 +1,5 @@ +nfs-kernel-server install: + pkg.installed: + - skip_verify: True + - refresh: False + - name: nfs-kernel-server diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers b/resources/tools/testbed-setup/playbooks/files/sudoers new file mode 100644 index 0000000000..367c390130 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/sudoers @@ -0,0 +1 @@ +testuser ALL=(root) NOPASSWD:ALL diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in b/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in new file mode 100644 index 0000000000..1797c2c636 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/sudoers_jenkins-in @@ -0,0 +1 @@ +jenkins-in ALL=(root) NOPASSWD: /bin/rm -fr /scratch/*, /bin/rm -fr /nfs/scratch/* diff --git a/resources/tools/testbed-setup/playbooks/files/sudoers_virl b/resources/tools/testbed-setup/playbooks/files/sudoers_virl new file mode 100644 index 0000000000..e0cf48ac10 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/sudoers_virl @@ -0,0 +1 @@ +virl ALL=(root) NOPASSWD:ALL diff --git a/resources/tools/testbed-setup/playbooks/files/ttyS0 b/resources/tools/testbed-setup/playbooks/files/ttyS0 new file mode 100644 index 0000000000..0ed8550190 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/ttyS0 @@ -0,0 +1,10 @@ +# ttyS0 - getty +# +# This service maintains a getty on ttyS0 from the point the system is +# started until it is shut down again. + +start on stopped rc RUNLEVEL=[12345] +stop on runlevel [!12345] + +respawn +exec /sbin/getty -L 115200 ttyS0 vt102 diff --git a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl new file mode 100644 index 0000000000..b4c3de745b --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl @@ -0,0 +1,27 @@ +-----BEGIN RSA PRIVATE KEY----- +MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb +v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd +vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2 +4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc +1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs +8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7 +0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN +EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN +0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU +MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD +p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW +79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG +OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD +GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef +bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg +8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu +f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u +UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/ ++m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT +D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/ +sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn +g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY +qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8 +EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD +BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN +-----END RSA PRIVATE KEY----- diff --git a/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub new file mode 100644 index 0000000000..0ef508c8a1 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/virl/id_rsa_virl.pub @@ -0,0 +1 @@ +ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBQOVOnNIenAtCi1k4VLgCBw80RYKc/UAHaFYWa8j7wpqH+Bu/yu5lT1GqE+znq3IrPFuG82RjhVsfkXUaKUdm7eYurMzgp+CEyZp4wSM7VPsFhh2+4F9O8iW6WN9Da8CWdisPCf4KXEmTzWbSkOC+ssRfipVWHawaHtQSRjLmvzYM1rbhWPM8HUn9zxr3M/wWhlSFgjMXgUu9EyNQAOlsxeAkywalpkubP3lqnQSi3u9vUJzUu8X3uLIEKu0g5IpEoDnRmEsaMwqY7CdhT5w/nvXy1umugNWLpUk6jvN65fJ60yzxgGX2RZuVYb0Go/2Ny0W+yaLkbuFeCrVjy74P virl@tb4-virl diff --git a/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment b/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment new file mode 100644 index 0000000000..5ec594d181 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/virl/ssh_environment @@ -0,0 +1 @@ +PATH=/home/jenkins-in/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games diff --git a/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper b/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper new file mode 100644 index 0000000000..e2d0a5fd08 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/files/virl/virl-bootstrap-wrapper @@ -0,0 +1,59 @@ +#!/usr/bin/expect + +if ![ string equal $::env(USER) "root"] { + puts "Please re-run this script as root." + exit 1 +} + +log_file /tmp/virl-bootstrap.log +set timeout 3600 + +spawn ./virl-bootstrap.py +expect "Which step are you on" +send "1\r" + +expect "Salt master" +send "us-1.virl.info,us-2.virl.info,us-4.virl.info\r" + +expect "Which step are you on" +send "2\r" + +expect "Salt id" +send "{{ hostname }}\r" +expect "Salt domain name" +send "linuxfoundation.org\r" + +expect "Which step are you on" +send "3\r" + +expect "System hostname" +send "{{ hostname }}\r" +expect "System Domain name" +send "linuxfoundation.org\r" + +expect "Which step are you on" +send "4\r" + +puts "*******************STEP 6*************************************************************************************************************************************************" +expect "Which step are you on" +send "6\r" +expect "Salt installed" + +puts "*******************STEP 8*************************************************************************************************************************************************" +expect "Which step are you on" +send "8\r" + +expect "Determining pillar cache" +expect "True" + +puts "*******************STEP 9*************************************************************************************************************************************************" +expect "Which step are you on" +send "9\r" + +expect "Failed: 0" + +puts "*******************STEP 11*************************************************************************************************************************************************" +expect "Which step are you on" +send "11\r" + +expect eof diff --git a/resources/tools/testbed-setup/playbooks/reboot.yaml b/resources/tools/testbed-setup/playbooks/reboot.yaml new file mode 100644 index 0000000000..9e22dcbb58 --- /dev/null +++ b/resources/tools/testbed-setup/playbooks/reboot.yaml @@ -0,0 +1,14 @@ +- hosts: all + remote_user: testuser + tasks: + - name: Reboot host + sudo: true + command: shutdown -r now "Ansible updates triggered" + async: 0 + poll: 0 + ignore_errors: true + - name: waiting for server to come back + local_action: wait_for host={{ inventory_hostname }} + state=started + sudo: false + diff --git a/resources/tools/testbed-setup/syslinux.cfg b/resources/tools/testbed-setup/syslinux.cfg new file mode 100644 index 0000000000..4038c1e9d2 --- /dev/null +++ b/resources/tools/testbed-setup/syslinux.cfg @@ -0,0 +1,6 @@ +# D-I config version 2.0 +serial 0 115200 +include ubuntu-installer/amd64/boot-screens/menu.cfg +default ubuntu-installer/amd64/boot-screens/vesamenu.c32 +prompt 0 +timeout 10 |