diff options
Diffstat (limited to 'resources/tools')
75 files changed, 531 insertions, 1197 deletions
diff --git a/resources/tools/testbed-setup/README.md b/resources/tools/testbed-setup/README.md deleted file mode 100644 index b4f376b96e..0000000000 --- a/resources/tools/testbed-setup/README.md +++ /dev/null @@ -1,160 +0,0 @@ -# Testbed Setup - -## Introduction - -This directoctory contains the *high-level* process to set up a hardware -machine as a CSIT testbed, either for use as a physical testbed host or -as a VIRL server. - -Code in this directory is NOT executed as part of a regular CSIT test case -but is stored here merely for archiving and documentation purposes. - - -## Setting up a hardware host - -Documentation below is just bullet points and assumes and understanding -of PXE boot and ansible. - -This process is specific for LF lab, and both examples given here as -well as associated code, are based on the assumption that they are run -in LF environment. If run elsewhere, changes will be required to IP addresses -and other parameters. - -The process below assumes that there is a host used for boostrapping (referred -to as "PXE boostrap server" below), and that the directory containig this README -is available on the PXE bootstrap server in ~testuser/host-setup. - -### Prepare the PXE bootstrap server when there is no http server AMD64 - - - `sudo apt-get install isc-dhcp-server tftpd-hpa nginx-light ansible` - - edit dhcpd.conf and place it to /etc/dhcp/ - - `sudo cp dhcpd.cfg /etc/dhcp/` - - `sudo service isc-dhcp-server restart` - - `cd ~testuser/host-setup` - - `sudo mkdir /mnt/cdrom` - - Ubuntu Bionic - - `wget 'http://cdimage.ubuntu.com/ubuntu/releases/18.04/release/ubuntu-18.04-server-amd64.iso'` - - `sudo mount -o loop ubuntu-18.04-server-amd64.iso /mnt/cdrom/` - - `sudo cp -r /mnt/cdrom/install/netboot/* /var/lib/tftpboot/` - - figure out where nginx will look for files on the filesystem when - responding to HTTP requests. The configuration is in one of the - files in /etc/nginx/conf.d/, /etc/nginx/sites-enabled/ or in - /etc/nginx/nginx.conf under section server/root. Save the path to WWW_ROOT - - `sudo mkdir -p ${WWW_ROOT}/download/ubuntu` - - `sudo cp -r /mnt/cdrom/* ${WWW_ROOT}/download/ubuntu/` - - `sudo cp /mnt/cdrom/ubuntu/isolinux/ldlinux.c32 /var/lib/tftpboot` - - `sudo cp /mnt/cdrom/ubuntu/isolinux/libcom32.c32 /var/lib/tftpboot` - - `sudo cp /mnt/cdrom/ubuntu/isolinux/libutil.c32 /var/lib/tftpboot` - - `sudo cp /mnt/cdrom/ubuntu/isolinux/chain.c32 /var/lib/tftpboot` - - `sudo umount /mnt/cdrom` - - edit ks.cfg and replace IP address with that of your PXE bootstrap server and subdir in /var/www (in this case /download) - - `sudo cp ks.cfg ${WWW_ROOT}/download/ks.cfg` - - edit boot-screens_txt.cfg and replace IP address with that of your PXE bootstrap server and subdir in /var/www (in this case /download) - - `sudo cp boot-screens_txt.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/txt.cfg` - - `sudo cp syslinux.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/syslinux.cfg` - -### New testbed host - manual preparation - -- set CIMC address -- set CIMC username, password and hostname -- set IPMI address -- set IPMI username, password and hostname - -### Bootstrap the host - -Convenient way to re-stage host via script: - - `sudo ./bootstrap_setup_testbed.sh <linux_ip> <mgmt_ip> <username> <pass>` - -Optional: CIMC - From PXE boostrap server - - - Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get LOM MAC addr - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i` - - Adjust BIOS settings - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />'` - - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf) - - If RAID is not created in CIMC. Create RAID array. Reboot. - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe` - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]'` - Alternatively, create the RAID array manually. - - Reboot server with boot from PXE (restart immediately) - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe` - - Set the next boot from HDD (without restart) Execute while Ubuntu install is running. - - `./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd` - -Optional: IPMI - From PXE boostrap server - - - Get MAC address of LAN0 - - `ipmitool -U ADMIN -H $HOST_ADDRESS raw 0x30 0x21 | tail -c 18` - - Add MAC address to DHCP (/etc/dhcp/dhcpd.conf) - - Reboot into PXE for next boot only - - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN chassis bootdev pxe` - - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN power reset` - - For live watching SOL (Serial-over-LAN console) - - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol activate` - - `ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol deactivate` - -When installation is finished: - - - Copy ssh keys for no pass access: `ssh-copy-id 10.30.51.x` - - Clone CSIT actual repo: `git clone https://gerrit.fd.io/r/csit` - - Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible` - - Edit production file and uncomment servers that are supposed to be - installed. - - Run ansible on selected hosts: - `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory production site.yaml` - -For non-VIRL hosts, stop here. - -### VIRL installation - -After the host has rebooted: - - - `ansible-playbook 02-virl-bootstrap.yaml` - - ssh to host - - `sudo -s` - - `cd virl-bootstrap` - - `./virl-bootstrap-wrapper` - - This command will error out when run the first time, as the VIRL host is not yet licensed. - - Make sure we contact all three VIRL SALT masters: - - - `for a in 1 2 4 ; do sudo salt-call --master us-${a}.virl.info test.ping ; done` - - - Contact the VIRL team, provide the hostname and domain (linuxfoundation.org), and ask them - to accept the key - - - After the key has been accepted, verify that connectivity with the SALT master is now OK: - - `for a in 1 2 4 ; do sudo salt-call --master us-${a}.virl.info test.ping ; done` - - - `./virl-bootstrap-wrapper` - - `reboot` - -After reboot, ssh to host again - - as VIRL user, NOT AS ROOT: - - `vinstall all` - - `sudo reboot` - -After reboot, ssh to host again - - as VIRL user: - - `sudo salt-call state.sls virl.routervms.all` - - `sudo salt-call state.sls virl.vmm.vmmall` - -Back on the PXE bootstrap server: - - - obtain the current server disk image and place it into - `files/virl-server-image/` as `server.qcow2` - - TO-DO: Need to find a place to store this image - - - `ansible-playbook 03-virl-post-install.yaml` - - - Run the following command ONLY ONCE. Otherwise it will create - duplicates of the VIRL disk image: - - `ansible-playbook 04-disk-image.yaml` - -The VIRL host should now be operational. Test, and when ready, create a -~jenkins-in/status file with the appropriate status. diff --git a/resources/tools/testbed-setup/README.rst b/resources/tools/testbed-setup/README.rst new file mode 100644 index 0000000000..738dffad49 --- /dev/null +++ b/resources/tools/testbed-setup/README.rst @@ -0,0 +1,246 @@ +Testbed Setup +============= + +Introduction +------------ + +This directory contains the *high-level* process to set up a hardware machine +as a CSIT testbed, either for use as a physical performance testbed host or as +a vpp_device host. + +Code in this directory is NOT executed as part of a regular CSIT test case +but is stored here for ad-hoc installation of HW, archiving and documentation +purposes. + +Setting up a hardware host +-------------------------- + +Documentation below is step by step tutorial and assumes an understanding of PXE +boot and Ansible and managing physical hardware via CIMC or IPMI. + +This process is not specific for LF lab, but associated files and code, is based +on the assumption that it runs in LF environment. If run elsewhere, changes +will be required in following files: + +#. Inventory directory: `ansible/inventories/sample_inventory/` +#. Inventory files: `ansible/inventories/sample_inventory/hosts` +#. Kickseed file: `pxe/ks.cfg` +#. DHCPD file: `pxe/dhcpd.conf` +#. Bootscreen file: `boot-screens_txt.cfg` + +The process below assumes that there is a host used for bootstrapping (referred +to as "PXE bootstrap server" below). + +Prepare the PXE bootstrap server when there is no http server AMD64 +``````````````````````````````````````````````````````````````````` + +#. Clone the csit repo: + + .. code-block:: bash + + git clone https://gerrit.fd.io/r/csit + cd csit/resources/tools/testbed-setup/pxe + +#. Setup prerequisities (isc-dhcp-server tftpd-hpa nginx-light ansible): + + .. code-block:: bash + + sudo apt-get install isc-dhcp-server tftpd-hpa nginx-light ansible + +#. Edit dhcpd.cfg: + + .. code-block:: bash + + sudo cp dhcpd.cfg /etc/dhcp/ + sudo service isc-dhcp-server restart + sudo mkdir /mnt/cdrom + +#. Download Ubuntu 18.04 LTS - X86_64: + + .. code-block:: bash + + wget http://cdimage.ubuntu.com/ubuntu/releases/18.04/release/ubuntu-18.04-server-amd64.iso + sudo mount -o loop ubuntu-18.04-server-amd64.iso /mnt/cdrom/ + sudo cp -r /mnt/cdrom/install/netboot/* /var/lib/tftpboot/ + + # Figure out root folder for NGINX webserver. The configuration is in one + # of the files in /etc/nginx/conf.d/, /etc/nginx/sites-enabled/ or in + # /etc/nginx/nginx.conf under section server/root. Save the path to + # variable WWW_ROOT. + sudo mkdir -p ${WWW_ROOT}/download/ubuntu + sudo cp -r /mnt/cdrom/* ${WWW_ROOT}/download/ubuntu/ + sudo cp /mnt/cdrom/ubuntu/isolinux/ldlinux.c32 /var/lib/tftpboot + sudo cp /mnt/cdrom/ubuntu/isolinux/libcom32.c32 /var/lib/tftpboot + sudo cp /mnt/cdrom/ubuntu/isolinux/libutil.c32 /var/lib/tftpboot + sudo cp /mnt/cdrom/ubuntu/isolinux/chain.c32 /var/lib/tftpboot + sudo umount /mnt/cdrom + +#. Edit ks.cfg and replace IP address of PXE bootstrap server and subdir in + `/var/www` (in this case `/var/www/download`): + + .. code-block:: bash + + sudo cp ks.cfg ${WWW_ROOT}/download/ks.cfg + +#. Edit boot-screens_txt.cfg and replace IP address of PXE bootstrap server and + subdir in `/var/www` (in this case `/var/www/download`): + + .. code-block:: bash + + sudo cp boot-screens_txt.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/txt.cfg + sudo cp syslinux.cfg /var/lib/tftpboot/ubuntu-installer/amd64/boot-screens/syslinux.cfg + +New testbed host - manual preparation +````````````````````````````````````` + +Set CIMC/IPMI address, username, password and hostname an BIOS. + +Bootstrap the host +`````````````````` + +Convenient way to re-stage host via script: + +.. code-block:: bash + + sudo ./bootstrap_setup_testbed.sh <linux_ip> <mgmt_ip> <username> <pass> + +Optional: CIMC - From PXE boostrap server +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +#. Initialize args.ip: Power-Off, reset BIOS defaults, Enable console redir, get + LOM MAC addr: + + .. code-block:: bash + + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -i + +#. Adjust BIOS settings: + + .. code-block:: bash + + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -s '<biosVfIntelHyperThreadingTech rn="Intel-HyperThreading-Tech" vpIntelHyperThreadingTech="disabled" />' -s '<biosVfEnhancedIntelSpeedStepTech rn="Enhanced-Intel-SpeedStep-Tech" vpEnhancedIntelSpeedStepTech="disabled" />' -s '<biosVfIntelTurboBoostTech rn="Intel-Turbo-Boost-Tech" vpIntelTurboBoostTech="disabled" />' + +#. If RAID is not created in CIMC. Create RAID array. Reboot: + + .. code-block:: bash + + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d --wipe + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -r -rl 1 -rs <disk size> -rd '[1,2]' + +#. Reboot server with boot from PXE (restart immediately): + + .. code-block:: bash + + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -pxe + +#. Set the next boot from HDD (without restart). Execute while Ubuntu install + is running: + + .. code-block:: bash + + ./cimc.py -u admin -p Cisco1234 $CIMC_ADDRESS -d -hdd + +Optional: IPMI - From PXE boostrap server +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +#. Get MAC address of LAN0: + + .. code-block:: bash + + ipmitool -U ADMIN -H $HOST_ADDRESS raw 0x30 0x21 | tail -c 18 + +#. Reboot into PXE for next boot only: + + .. code-block:: bash + + ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN chassis bootdev pxe + ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN power reset + +#. For live watching SOL (Serial-over-LAN console): + + .. code-block:: bash + + ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol activate + ipmitool -I lanplus -H $HOST_ADDRESS -U ADMIN sol deactivate + +Ansible machine +~~~~~~~~~~~~~~~ + +Prerequisities for running Ansible +.................................. + +- Ansible can run on any machine that has direct SSH connectivity to target + machines that will be provisioned (does not need to be PXE server). +- User `testuser` with password `Csit1234` is created with home folder + initialized on all target machines that will be provisioned. +- SSH keys for no pass access are copied to all target machines that will be + provisioned: `ssh-copy-id x.x.x.x`. +- Inventory directory is created with same or similar content as + `inventories/lf_inventory` in `inventories/` directory (`sample_inventory` + can be used). +- Group variables in `ansible/inventories/<inventory>/group_vars/all.yaml` are + adjusted per environment. Special attention to `proxy_env` variable. +- Host variables in `ansible/inventories/<inventory>/host_vars/x.x.x.x.yaml` are + defined. + +Ansible structure +................. + +Ansible is defining roles `TG` (Traffic Generator), `SUT` (System Under Test), +`VPP_DEVICE` (vpp_device host for functional testing). + +Each Host has corresponding Ansible role mapped and is applied only if Host +with that role is present in inventory file. As a part of optimization the role +`common` contains Ansible tasks applied for all Hosts. + +.. note:: + + You may see `[WARNING]: Could not match supplied host pattern, ignoring: + <role>` in case you have not define hosts for that particular role. + +Ansible structure is described below: + +.. code-block:: bash + + . + ├── inventories # Contains all inventories. + │  ├── sample_inventory # Sample, free for edits outside of LF. + │  │  ├── group_vars # Variables applied for all hosts. + │  │  │  └── all.yaml + │  │  ├── hosts # Inventory list with sample hosts. + │  │  └── host_vars # Variables applied for single host only. + │  │  └── 1.1.1.1.yaml # Sample host with IP 1.1.1.1 + │  └── lf_inventory # Linux Foundation inventory. + │  ├── group_vars + │  │  └── all.yaml + │  ├── hosts + │  └── host_vars + ├── roles # CSIT roles. + │  ├── common # Role applied for all hosts. + │  ├── sut # Role applied for all SUTs only. + │  ├── tg # Role applied for all TGs only. + │  ├── tg_sut # Role applied for TGs and SUTs only. + │  └── vpp_device # Role applied for vpp_device only. + ├── site.yaml # Main playbook. + ├── sut.yaml # SUT playbook. + ├── tg.yaml # TG playbook. + ├── vault_pass # Main password for vualt. + ├── vault.yml # Ansible vualt storage. + └── vpp_device.yaml # vpp_device playbook. + +Running Ansible +............... + +#. Go to ansible directory: `cd csit/resources/tools/testbed-setup/ansible` +#. Run ansible on selected hosts: + `ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' --inventory <inventory_file> site.yaml --limit x.x.x.x` + +.. note:: + + In case you want to provision only particular role. You can use tags: `tg`, + `sut`, `vpp_device`. + +Reboot hosts +------------ + +Manually reboot hosts after Ansible provisioning succeeded. diff --git a/resources/tools/testbed-setup/ansible/group_vars/all.yaml b/resources/tools/testbed-setup/ansible/group_vars/all.yaml deleted file mode 100644 index c646e06d24..0000000000 --- a/resources/tools/testbed-setup/ansible/group_vars/all.yaml +++ /dev/null @@ -1,5 +0,0 @@ ---- -# file: group_vars/all.yaml - -ansible_python_interpreter: "/usr/bin/python2.7" -ansible_become_pass: '{{ inventory_sudo_pass }}' diff --git a/resources/tools/testbed-setup/ansible/inventories/lf_inventory/group_vars/all.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/group_vars/all.yaml new file mode 100644 index 0000000000..c464ad8da2 --- /dev/null +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/group_vars/all.yaml @@ -0,0 +1,42 @@ +--- +# file: group_vars/all.yaml + +# General settings +ansible_python_interpreter: '/usr/bin/python2.7' +ansible_become_pass: '{{ inventory_sudo_pass }}' +# Domain is used in /etc/hosts file on target machine. +domain: 'linuxfoundation.org' +# DNS is used in /etc/netplan/01-netcfg.yaml +dns_servers: "[ 199.204.44.24, 199.204.47.54 ]" + +# Proxy settings: Uncomment and fill the proper values. These variables will be +# set globally by writing into /etc/environment file on target machine. +#proxy_env: +# http_proxy: http://proxy.com:80 +# HTTP_PROXY: http://proxy.com:80 +# https_proxy: http://proxy.com:80 +# HTTPS_PROXY: http://proxy.com:80 +# ftp_proxy: http://proxy.com:80 +# FTP_PROXY: http://proxy.com:80 +# no_proxy: localhost,127.0.0.1,{{ ansible_default_ipv4.address }} +# NO_PROXY: localhost,127.0.0.1,{{ ansible_default_ipv4.address }} + +# Docker settings. +docker_edition: 'ce' +docker_channel: 'edge' +docker_version: '18.05.0' +docker_users: ['testuser'] +docker_repository: 'deb https://download.docker.com/linux/{{ ansible_distribution | lower }} {{ ansible_distribution_release }} {{ docker_channel }}' +docker_apt_package_name: '{{ docker_version }}~{{ docker_edition }}~3-0~{{ ansible_distribution | lower }}' +docker_daemon_environment_http: + - 'HTTP_PROXY={{ proxy_env.http_proxy }}' + - 'NO_PROXY={{ proxy_env.no_proxy }}' +docker_daemon_environment_https: + - 'HTTPS_PROXY={{ proxy_env.https_proxy }}' + - 'NO_PROXY={{ proxy_env.no_proxy }}' + +# Kubernetes settings. +kubernetes_channel: 'main' +kubernetes_version: '1.11.0-00' +kubernetes_repository: 'deb http://apt.kubernetes.io/ kubernetes-xenial {{ kubernetes_channel }}' +kubernetes_apt_package_name: '{{ kubernetes_version }}' diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.16.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.16.yaml index 25401e33f3..25401e33f3 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.16.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.16.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.17.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.17.yaml index ac3f9fa310..ac3f9fa310 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.17.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.17.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.18.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.18.yaml index e96ed37d89..e96ed37d89 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.18.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.18.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.20.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.20.yaml index 91eb9fc9ca..91eb9fc9ca 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.20.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.20.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.21.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.21.yaml index 84a72542e9..84a72542e9 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.21.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.21.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.22.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.22.yaml index 5d7aaa5bee..5d7aaa5bee 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.22.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.22.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.24.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.24.yaml index 88e5148dfb..88e5148dfb 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.24.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.24.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.25.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.25.yaml index 144e449b4a..144e449b4a 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.25.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.25.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.26.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.26.yaml index d860ef216d..d860ef216d 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.26.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.26.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.28.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.28.yaml index 11665983fa..11665983fa 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.28.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.28.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.29.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.29.yaml index 4ab6fd1116..4ab6fd1116 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.29.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.29.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.30.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.30.yaml index ab5d222188..ab5d222188 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.30.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.30.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.36.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.36.yaml index e405b8064d..e405b8064d 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.36.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.36.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.37.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.37.yaml index ece3a752aa..ece3a752aa 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.37.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.37.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.44.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.44.yaml index bdaeed5407..bdaeed5407 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.44.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.44.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.45.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.45.yaml index d12c763516..d12c763516 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.45.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.45.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.46.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.46.yaml index 8e38586f7f..8e38586f7f 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.46.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.46.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.47.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.47.yaml index a3d05730da..a3d05730da 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.47.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.47.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.48.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.48.yaml index f6a77e8be3..f6a77e8be3 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.48.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.48.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.49.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.49.yaml index 9aad58a00b..9aad58a00b 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.49.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.49.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.50.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.50.yaml index 55b8655e8c..55b8655e8c 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.50.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.50.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.51.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.51.yaml index 42eeea814d..42eeea814d 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.51.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.51.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.52.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.52.yaml index 7eb994a8a2..7eb994a8a2 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.52.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.52.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.53.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.53.yaml index 938bcecd30..938bcecd30 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.53.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.53.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.54.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.54.yaml index 9a3de32d3d..9a3de32d3d 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.54.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.54.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.55.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.55.yaml index 2014e01dea..2014e01dea 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.55.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.55.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.56.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.56.yaml index 1d926f56a9..1d926f56a9 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.56.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.56.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.57.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.57.yaml index e5bddf33f8..e5bddf33f8 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.57.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.57.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.58.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.58.yaml index 0e854fdeb0..0e854fdeb0 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.58.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.58.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.59.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.59.yaml index 4647606980..4647606980 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.59.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.59.yaml diff --git a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.60.yaml b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.60.yaml index 27f5b45645..27f5b45645 100644 --- a/resources/tools/testbed-setup/ansible/host_vars/10.30.51.60.yaml +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/host_vars/10.30.51.60.yaml diff --git a/resources/tools/testbed-setup/ansible/production b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/hosts index 5397d319db..d2d67981b0 100644 --- a/resources/tools/testbed-setup/ansible/production +++ b/resources/tools/testbed-setup/ansible/inventories/lf_inventory/hosts @@ -15,11 +15,6 @@ all: 10.30.51.22: null #t2-sut2 10.30.51.25: null #t3-sut1 10.30.51.26: null #t3-sut2 -# virl: # WARNING, DO NOT ENABLE VIRL UNLESS YOU KNOW WHAT YOU ARE DOING -# hosts: -# 10.30.51.28: null #t4-virl1 -# 10.30.51.29: null #t4-virl2 -# 10.30.51.30: null #t4-virl3 skylake: children: tg: diff --git a/resources/tools/testbed-setup/ansible/inventories/sample_inventory/group_vars/all.yaml b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/group_vars/all.yaml new file mode 100644 index 0000000000..8ffac218c3 --- /dev/null +++ b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/group_vars/all.yaml @@ -0,0 +1,42 @@ +--- +# file: group_vars/all.yaml + +# General settings +ansible_python_interpreter: '/usr/bin/python2.7' +ansible_become_pass: '{{ inventory_sudo_pass }}' +# Domain is used in /etc/hosts file on target machine. +domain: 'linuxfoundation.org' +# DNS is used in /etc/netplan/01-netcfg.yaml on target machine. +dns_servers: "[ 199.204.44.24, 199.204.47.54 ]" + +# Proxy settings: Uncomment and fill the proper values. These variables will be +# set globally by writing into /etc/environment file on target machine. +#proxy_env: +# http_proxy: http://proxy.com:80 +# HTTP_PROXY: http://proxy.com:80 +# https_proxy: http://proxy.com:80 +# HTTPS_PROXY: http://proxy.com:80 +# ftp_proxy: http://proxy.com:80 +# FTP_PROXY: http://proxy.com:80 +# no_proxy: localhost,127.0.0.1,{{ ansible_default_ipv4.address }} +# NO_PROXY: localhost,127.0.0.1,{{ ansible_default_ipv4.address }} + +# Docker settings. +docker_edition: 'ce' +docker_channel: 'edge' +docker_version: '18.05.0' +docker_users: ['testuser'] +docker_repository: 'deb https://download.docker.com/linux/{{ ansible_distribution | lower }} {{ ansible_distribution_release }} {{ docker_channel }}' +docker_apt_package_name: '{{ docker_version }}~{{ docker_edition }}~3-0~{{ ansible_distribution | lower }}' +docker_daemon_environment_http: + - 'HTTP_PROXY={{ proxy_env.http_proxy }}' + - 'NO_PROXY={{ proxy_env.no_proxy }}' +docker_daemon_environment_https: + - 'HTTPS_PROXY={{ proxy_env.https_proxy }}' + - 'NO_PROXY={{ proxy_env.no_proxy }}' + +# Kubernetes settings. +kubernetes_channel: 'main' +kubernetes_version: '1.11.0-00' +kubernetes_repository: 'deb http://apt.kubernetes.io/ kubernetes-xenial {{ kubernetes_channel }}' +kubernetes_apt_package_name: '{{ kubernetes_version }}' diff --git a/resources/tools/testbed-setup/ansible/inventories/sample_inventory/host_vars/1.1.1.1.yaml b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/host_vars/1.1.1.1.yaml new file mode 100644 index 0000000000..6cefdb4cc3 --- /dev/null +++ b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/host_vars/1.1.1.1.yaml @@ -0,0 +1,6 @@ +--- +# file: host_vars/x.x.x.x.yaml + +hostname: "t1-tg1" +isolcpus: "1-17,19-35" +cfs_cpus: "0,18" diff --git a/resources/tools/testbed-setup/ansible/inventories/sample_inventory/hosts b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/hosts new file mode 100644 index 0000000000..da5d7f1634 --- /dev/null +++ b/resources/tools/testbed-setup/ansible/inventories/sample_inventory/hosts @@ -0,0 +1,11 @@ +all: + children: + skylake: # Architecture: (options) skylake, haswell, taishan... + children: + tg: + hosts: + 1.1.1.1: null #t1-tg + sut: + hosts: + 2.2.2.2: null #t1-sut1 + 3.3.3.3: null #t1-sut2 diff --git a/resources/tools/testbed-setup/ansible/roles/common/tasks/main.yaml b/resources/tools/testbed-setup/ansible/roles/common/tasks/main.yaml index 38d8188be8..1481536034 100644 --- a/resources/tools/testbed-setup/ansible/roles/common/tasks/main.yaml +++ b/resources/tools/testbed-setup/ansible/roles/common/tasks/main.yaml @@ -1,6 +1,14 @@ --- # file: roles/common/tasks/main.yaml +- name: Add permanent proxy settings + lineinfile: + path: "/etc/environment" + state: "present" + line: "{{ item.key }}={{ item.value }}" + with_dict: "{{ proxy_env }}" + when: proxy_env is defined + - name: Ubuntu specific import_tasks: ubuntu.yaml when: ansible_distribution|lower == 'ubuntu' @@ -14,7 +22,7 @@ lineinfile: path: '/etc/hosts' regexp: '^{{ ansible_default_ipv4.address }}.+$' - line: '{{ ansible_default_ipv4.address }} {{ hostname }}.linuxfoundation.org' + line: '{{ ansible_default_ipv4.address }} {{ hostname }}.{{ domain }}' tags: set-hostname - name: Set sudoers admin @@ -44,3 +52,11 @@ mode: '644' notify: ['Update GRUB'] tags: copy-grub + +- name: Add permanent proxy settings + lineinfile: + path: "/etc/environment" + state: "present" + line: "{{ item.key }}={{ item.value }}" + with_dict: "{{ proxy_env }}" + when: proxy_env is defined diff --git a/resources/tools/testbed-setup/ansible/roles/common/tasks/ubuntu.yaml b/resources/tools/testbed-setup/ansible/roles/common/tasks/ubuntu.yaml index ff47ffc656..ae606cd494 100644 --- a/resources/tools/testbed-setup/ansible/roles/common/tasks/ubuntu.yaml +++ b/resources/tools/testbed-setup/ansible/roles/common/tasks/ubuntu.yaml @@ -15,44 +15,17 @@ tags: copy-apt-sources when: ansible_machine == 'x86_64' -- name: Install python-apt +- name: Install CSIT dependencies apt: - name: 'python-apt' + name: '{{ item }}' state: 'present' - update_cache: True - tags: install-python-apt - -- name: Install git - apt: - name: 'git' - state: 'present' - update_cache: True - tags: install-git - -- name: Install crudini - apt: - name: 'crudini' - state: 'present' - update_cache: True - tags: install-crudini - -- name: Install expect - apt: - name: 'expect' - state: 'present' - update_cache: True - tags: install-expect - -- name: Install socat - apt: - name: 'socat' - state: 'present' - update_cache: True - tags: install-socat - -- name: Install qemu - apt: - name: 'qemu-system' - state: 'present' - update_cache: True - tags: install-qemu + install_recommends: False + with_items: + - 'python-apt' + - 'python-setuptools' + - 'git' + - 'crudini' + - 'expect' + - 'socat' + - 'qemu-system' + tags: install-csit-dependencies diff --git a/resources/tools/testbed-setup/ansible/roles/sut/tasks/ubuntu.yaml b/resources/tools/testbed-setup/ansible/roles/sut/tasks/ubuntu.yaml index 824f0926b5..69ca52916e 100644 --- a/resources/tools/testbed-setup/ansible/roles/sut/tasks/ubuntu.yaml +++ b/resources/tools/testbed-setup/ansible/roles/sut/tasks/ubuntu.yaml @@ -1,106 +1,23 @@ --- # file: roles/sut/tasks/ubuntu.yaml -- name: Install DKMS - apt: - name: 'dkms' - state: 'present' - update_cache: True - become: yes - tags: install-dkms - -- name: Install pkg-config - apt: - name: 'pkg-config' - state: 'present' - update_cache: True - become: yes - tags: install-pkg-config - -- name: Install libglib2.0-dev - apt: - name: 'libglib2.0-dev' - state: 'present' - update_cache: True - become: yes - tags: install-libglib2.0-dev - -- name: Install autoconf - apt: - name: 'autoconf' - state: 'present' - update_cache: True - become: yes - tags: install-autoconf - -- name: Install libtool - apt: - name: 'libtool' - state: 'present' - update_cache: True - become: yes - tags: install-libtool - -- name: Install screen - apt: - name: 'screen' - state: 'present' - update_cache: True - become: yes - tags: install-screen - -- name: Install libmbedcrypto1 - apt: - name: 'libmbedcrypto1' - state: 'present' - update_cache: True - become: yes - tags: install-libmbedcrypto1 - -- name: Install libmbedtls10 - apt: - name: 'libmbedtls10' - state: 'present' - update_cache: True - become: yes - tags: install-libmbedtls10 - -- name: Install libmbedx509-0 - apt: - name: 'libmbedx509-0' - state: 'present' - update_cache: True - become: yes - tags: install-libmbedx509-0 - -- name: Install lxc - apt: - name: 'lxc' - state: 'present' - update_cache: True - become: yes - tags: install-lxc - -- name: Install java - apt: - name: 'openjdk-8-jdk' - state: 'present' - update_cache: True - become: yes - tags: install-java - -- name: Install Pixman (Qemu-dep) - apt: - name: 'libpixman-1-dev' - state: 'present' - update_cache: True - become: yes - tags: install-pixman - -- name: Install python-cffi - apt: - name: 'python-cffi' - state: 'present' - update_cache: True - become: yes - tags: install-python-cffi +- name: Install CSIT dependencies + apt: + name: '{{ item }}' + state: 'present' + install_recommends: False + with_items: + - 'dkms' + - 'pkg-config' + - 'libglib2.0-dev' + - 'autoconf' + - 'libtool' + - 'screen' + - 'libmbedcrypto1' + - 'libmbedtls10' + - 'libmbedx509-0' + - 'lxc' + - 'openjdk-8-jdk' + - 'libpixman-1-dev' + - 'python-cffi' + tags: install-csit-dependencies diff --git a/resources/tools/testbed-setup/ansible/roles/tg/tasks/main.yaml b/resources/tools/testbed-setup/ansible/roles/tg/tasks/main.yaml index 54001a7272..9fa19b5b0f 100644 --- a/resources/tools/testbed-setup/ansible/roles/tg/tasks/main.yaml +++ b/resources/tools/testbed-setup/ansible/roles/tg/tasks/main.yaml @@ -2,5 +2,5 @@ # file: roles/tg/tasks/main.yaml - name: Ubuntu specific - import_tasks: ubuntu_x86_64.yaml - when: ansible_distribution|lower == 'ubuntu' and ansible_machine == 'x86_64' + import_tasks: ubuntu.yaml + when: ansible_distribution|lower == 'ubuntu' diff --git a/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu.yaml b/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu.yaml new file mode 100644 index 0000000000..acb4f9802e --- /dev/null +++ b/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu.yaml @@ -0,0 +1,11 @@ +--- +# file: roles/tg/tasks/ubuntu.yaml + +- name: Install CSIT dependencies + apt: + name: '{{ item }}' + state: 'present' + install_recommends: False + with_items: + - 'unzip' + tags: install-csit-dependencies diff --git a/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu_x86_64.yaml b/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu_x86_64.yaml deleted file mode 100644 index 54a04685e6..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/tg/tasks/ubuntu_x86_64.yaml +++ /dev/null @@ -1,9 +0,0 @@ ---- -# file: roles/tg/tasks/ubuntu_x86_64.yaml - -- name: Install Unzip - apt: - name: 'unzip' - state: 'present' - update_cache: True - tags: install-unzip diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/defaults/main.yaml b/resources/tools/testbed-setup/ansible/roles/tg_sut/defaults/main.yaml deleted file mode 100644 index 3a6f68fb8b..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/tg_sut/defaults/main.yaml +++ /dev/null @@ -1,28 +0,0 @@ ---- -docker_edition: "ce" -docker_channel: "edge" - -docker_version: "18.05.0" -docker_install_docker_compose: True -docker_compose_version: "1.21.0" - -docker_users: ['testuser'] - -docker_daemon_options: [] -# Can be used to set environment variables for the Docker daemon, such as: -# docker_daemon_environment: -# - "HTTP_PROXY=http://proxy.example.com:3128/" -# - "HTTPS_PROXY=http://proxy.example.com:3128/" -# - "NO_PROXY=localhost,127.0.0.1" -docker_daemon_environment: [] - -docker_repository: "deb https://download.docker.com/linux/{{ ansible_distribution | lower }} {{ ansible_distribution_release }} {{ docker_channel }}" -docker_apt_package_name: "{{ docker_version }}~{{ docker_edition }}~3-0~{{ ansible_distribution | lower }}" - -apt_cache_time: 86400 - -kubernetes_channel: "main" -kubernetes_version: "1.11.0-00" - -kubernetes_repository: "deb http://apt.kubernetes.io/ kubernetes-xenial {{ kubernetes_channel }}" -kubernetes_apt_package_name: "{{ kubernetes_version }}" diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/files/netplan_config b/resources/tools/testbed-setup/ansible/roles/tg_sut/files/netplan_config index 2f34cfbaca..2602f93b4f 100644 --- a/resources/tools/testbed-setup/ansible/roles/tg_sut/files/netplan_config +++ b/resources/tools/testbed-setup/ansible/roles/tg_sut/files/netplan_config @@ -6,6 +6,7 @@ network: ethernets: {{ ansible_default_ipv4["interface"] }}: addresses: [ {{ (ansible_default_ipv4.address + '/' + ansible_default_ipv4.netmask) | ipaddr('host/prefix') }} ] + dhcp4: false gateway4: {{ ansible_default_ipv4["gateway"] }} nameservers: - addresses: [ 199.204.44.24, 199.204.47.54 ] + addresses: {{ dns_servers }} diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/files/requirements.txt b/resources/tools/testbed-setup/ansible/roles/tg_sut/files/requirements.txt index 11caf5d563..0ce17e2b47 100644 --- a/resources/tools/testbed-setup/ansible/roles/tg_sut/files/requirements.txt +++ b/resources/tools/testbed-setup/ansible/roles/tg_sut/files/requirements.txt @@ -1,13 +1,56 @@ -robotframework==2.9.2 -paramiko==1.16.0 -scp==0.10.2 -ipaddress==1.0.16 -interruptingcow==0.6 -PyYAML==3.11 -pykwalify==1.5.0 -scapy==2.3.1 -enum34==1.1.2 -requests==2.9.1 +# DISCLAIMER: BEFORE EDITING THIS FILE! +# +# This file has two closely related consequences. +# The common part is that this file defines +# the content of virtual Python environment +# used when Robot tests are running. +# The difference is in which machine the environment is created on. +# For the Jenkins executor machines, +# editing this file has no surprising consequences. +# +# But the environment is also being created +# on virtual machines created by VIRL, which do have specific restrictions. +# Complete package and setting snapshot (for both VIRL and Physical Testbed), +# with network being limited in case of VIRL to local only. +# This implies pip currently being set to site-packages only +# for both VIRL and Physical Testbed. +# So if the "virl image" applied on the machine +# does not reflect the edits, some installations might fail. +# Even if the failure may not directly impact execution, +# this leads into inconsistency between installed environment +# and the code base which may lead into fatal error or uncaught exceptions. +# +# The "virl image" is built from files such as +# resources/tools/disk-image-builder/ubuntu/lists/ubuntu-16.04.1_2017-10-21_2.0/pip-requirements.txt +# but the build is not automated, +# the new "virl image" has to be built and applied manually +# before your edit can pass. +# This also means, incompatible virl images +# would make existing tests fail until your edit is merged. +# +# TODO: Automate the virtualenv download and distribution +# on all types of testbeds prior the test execution. +# TODO: Figure out a way to verify edits to this file automatically. + +# TODO: Split into directly needed packages and their dependencies. +docopt==0.6.2 # for pykwalify ecdsa==0.13 +enum34==1.1.2 +ipaddress==1.0.16 +paramiko==1.16.0 +pexpect==4.6.0 pycrypto==2.6.1 +pykwalify==1.5.0 pypcap==1.1.5 +python-dateutil==2.4.2 # for pykwalify +PyYAML==3.11 +requests==2.9.1 +robotframework==2.9.2 +scapy==2.3.1 +scp==0.10.2 +six==1.12.0 # for python-dateutil + +# The following is only there for PLRsearch. +dill==0.2.8.2 +numpy==1.14.5 +scipy==1.1.0 diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/tasks/ubuntu.yaml b/resources/tools/testbed-setup/ansible/roles/tg_sut/tasks/ubuntu.yaml index 8604185aa2..2f75ae545d 100644 --- a/resources/tools/testbed-setup/ansible/roles/tg_sut/tasks/ubuntu.yaml +++ b/resources/tools/testbed-setup/ansible/roles/tg_sut/tasks/ubuntu.yaml @@ -1,178 +1,110 @@ --- # file: roles/tg_sut/tasks/ubuntu.yaml -- name: Install python-dev +- name: Install CSIT dependencies apt: - name: 'python-dev' + name: '{{ item }}' state: 'present' - update_cache: True - tags: install-python-dev - -- name: Install python-virtualenv - apt: - name: 'python-virtualenv' - state: 'present' - update_cache: True - tags: install-python-virtualenv - -- name: Install python pip - apt: - name: 'python-pip' - state: 'present' - update_cache: True - tags: install-python-pip - -- name: Install libpcap-dev - apt: - name: 'libpcap-dev' - state: 'present' - update_cache: True - tags: install-libpcap-dev - -- name: Install cpufrequtils - apt: - name: 'cpufrequtils' - state: 'present' - update_cache: True - tags: install-cpufrequtils - -- name: Install cgroup-support - apt: - name: 'cgroup-bin' - state: 'present' - update_cache: True - tags: install-cgroup-support - -- name: Install zlib1g-dev - apt: - name: 'zlib1g-dev' - state: 'present' - update_cache: True - tags: install-zlib1g-dev - -- name: Install libnuma-dev - apt: - name: 'libnuma-dev' - state: 'present' - update_cache: True - tags: install-libnuma-dev - -- name: Install Docker and role dependencies - apt: - name: "{{ item }}" - state: "present" install_recommends: False with_items: - - "apt-transport-https" - - "ca-certificates" - - "software-properties-common" - - "cron" - tags: install-docker - -- name: Install Docker APT GPG key + - 'python-dev' + - 'python-virtualenv' + - 'python-pip' + - 'libpcap-dev' + - 'cpufrequtils' + - 'cgroup-bin' + - 'zlib1g-dev' + - 'apt-transport-https' + - 'ca-certificates' + - 'software-properties-common' + - 'cron' + - 'libnuma-dev' + tags: install-csit-dependencies + +- name: Add an Apt signing key, for docker-ce repository apt_key: url: https://download.docker.com/linux/ubuntu/gpg - state: "present" + state: 'present' tags: install-docker - name: Install Docker APT repository apt_repository: - repo: "{{ docker_repository }}" - state: "present" + repo: '{{ docker_repository }}' + state: 'present' update_cache: True tags: install-docker - name: Install Docker apt: - name: "docker-{{ docker_edition }}={{ docker_apt_package_name }}" - state: "present" - update_cache: True - install_recommends: False - cache_valid_time: "{{ apt_cache_time }}" + name: 'docker-{{ docker_edition }}={{ docker_apt_package_name }}' + state: 'present' tags: install-docker -- name: Remove Upstart docker config file +- name: Creates Docker service directory file: - path: "/etc/default/docker" - state: "absent" - tags: docker + path: '/etc/systemd/system/docker.service.d' + state: 'directory' -- name: Ensure systemd directory exists - file: - path: "/etc/systemd/system" - state: "directory" - owner: "root" - group: "root" - mode: "0755" - tags: ensure-docker +- name: Setup Docker http proxy + template: + src: 'templates/docker.service.proxy.http' + dest: '/etc/systemd/system/docker.service.d/http-proxy.conf' + owner: 'root' + group: 'root' + mode: '0644' + register: docker_register_systemd_service + when: proxy_env is defined and proxy_env.http_proxy is defined + tags: copy-docker -- name: Copy systemd docker unit file +- name: Setup Docker https proxy template: - src: "templates/docker.service.j2" - dest: "/etc/systemd/system/docker.service" - owner: "root" - group: "root" - mode: "0644" + src: 'templates/docker.service.proxy.https' + dest: '/etc/systemd/system/docker.service.d/https-proxy.conf' + owner: 'root' + group: 'root' + mode: '0644' register: docker_register_systemd_service + when: proxy_env is defined and proxy_env.https_proxy is defined tags: copy-docker - name: Reload systemd daemon - command: "systemctl daemon-reload" - notify: ["Restart Docker"] + command: 'systemctl daemon-reload' + notify: ['Restart Docker'] when: (docker_register_systemd_service and docker_register_systemd_service is changed) tags: restart-docker -- name: Set specific users to "docker" group +- name: Set specific users to docker group user: - name: "{{ item }}" - groups: "docker" + name: '{{ item }}' + groups: 'docker' append: True - with_items: "{{ docker_users }}" + with_items: '{{ docker_users }}' when: docker_users tags: set-docker -- name: Install kubernetes APT GPG key +- name: Add an Apt signing key, for Kubernetes repository apt_key: url: https://packages.cloud.google.com/apt/doc/apt-key.gpg - state: "present" + state: 'present' tags: install-kubernetes - name: Install kubernetes APT repository apt_repository: - repo: "{{ kubernetes_repository }}" - state: "present" - update_cache: True - tags: install-kubernetes - -- name: Install kubeadm - apt: - name: "kubeadm={{ kubernetes_apt_package_name }}" - state: "present" - force: yes - update_cache: True - install_recommends: False - cache_valid_time: "{{ apt_cache_time }}" - tags: install-kubernetes - -- name: Install kubectl - apt: - name: "kubectl={{ kubernetes_apt_package_name }}" - state: "present" - force: yes + repo: '{{ kubernetes_repository }}' + state: 'present' update_cache: True - install_recommends: False - cache_valid_time: "{{ apt_cache_time }}" tags: install-kubernetes -- name: Install kubelet +- name: Install Kubernetes apt: - name: "kubelet={{ kubernetes_apt_package_name }}" - state: "present" + name: '{{ item }}={{ kubernetes_apt_package_name }}' + state: 'present' force: yes - update_cache: True - install_recommends: False - cache_valid_time: "{{ apt_cache_time }}" + with_items: + - 'kubeadm' + - 'kubectl' + - 'kubelet' tags: install-kubernetes - name: Apply kubelet parameter diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.j2 b/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.j2 deleted file mode 100644 index 26a1bcf372..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.j2 +++ /dev/null @@ -1,34 +0,0 @@ -# {{ ansible_managed }} - -[Unit] -Description=Docker Application Container Engine -Documentation=https://docs.docker.com -After=network-online.target docker.socket -Requires=docker.socket - -[Service] -Type=notify -# the default is not to use systemd for cgroups because the delegate issues still -# exists and systemd currently does not support the cgroup feature set required -# for containers run by docker -{% if docker_daemon_environment %} -Environment="{{ docker_daemon_environment | join('" "') }}" -{% endif %} -ExecStart=/usr/bin/dockerd {{ docker_daemon_options | join(" ") }} -ExecReload=/bin/kill -s HUP $MAINPID -# Having non-zero Limit*s causes performance problems due to accounting overhead -# in the kernel. We recommend using cgroups to do container-local accounting. -LimitNOFILE=infinity -LimitNPROC=infinity -LimitCORE=infinity -# Uncomment TasksMax if your systemd version supports it. -# Only systemd 226 and above support this version. -TasksMax=infinity -TimeoutStartSec=0 -# set delegate yes so that systemd does not reset the cgroups of docker containers -Delegate=yes -# kill only the docker process, not all processes in the cgroup -KillMode=process - -[Install] -WantedBy=multi-user.target diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.http b/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.http new file mode 100644 index 0000000000..73ceba3870 --- /dev/null +++ b/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.http @@ -0,0 +1,4 @@ +# {{ ansible_managed }} + +[Service] +Environment="{{ docker_daemon_environment_http | join('" "') }}" diff --git a/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.https b/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.https new file mode 100644 index 0000000000..1c2097eb9d --- /dev/null +++ b/resources/tools/testbed-setup/ansible/roles/tg_sut/templates/docker.service.proxy.https @@ -0,0 +1,4 @@ +# {{ ansible_managed }} + +[Service] +Environment="{{ docker_daemon_environment_https | join('" "') }}" diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/interfaces_virl b/resources/tools/testbed-setup/ansible/roles/virl/files/interfaces_virl deleted file mode 100644 index 25ea35a0c5..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/interfaces_virl +++ /dev/null @@ -1,17 +0,0 @@ -# This file describes the network interfaces available on your system -# and how to activate them. For more information, see interfaces(5). - -# The loopback network interface -auto lo -iface lo inet loopback - -# The primary network interface -auto br1 -iface br1 inet static - address {{ ansible_default_ipv4["address"] }} - netmask {{ ansible_default_ipv4["netmask"] }} - gateway {{ ansible_default_ipv4["gateway"] }} - dns-nameservers 199.204.44.24 199.204.47.54 - bridge_maxwait 0 - bridge_ports eth0 eth4 - bridge_stp off diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/nova_os_ip.patch b/resources/tools/testbed-setup/ansible/roles/virl/files/nova_os_ip.patch deleted file mode 100644 index a943dc9b25..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/nova_os_ip.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- api/metadata/base.py.old 2017-04-26 12:38:52.522991596 +0000 -+++ api/metadata/base.py 2017-04-26 10:06:46.396450566 +0000 -@@ -493,7 +493,7 @@ - path = 'openstack/%s/%s' % (version, VD_JSON_NAME) - yield (path, self.lookup(path)) - -- if self._check_version(LIBERTY, version, ALL_OPENSTACK_VERSIONS): -+ if False and self._check_version(LIBERTY, version, ALL_OPENSTACK_VERSIONS): - path = 'openstack/%s/%s' % (version, NW_JSON_NAME) - yield (path, self.lookup(path)) - - diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/requirements.txt b/resources/tools/testbed-setup/ansible/roles/virl/files/requirements.txt deleted file mode 100644 index 11caf5d563..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/requirements.txt +++ /dev/null @@ -1,13 +0,0 @@ -robotframework==2.9.2 -paramiko==1.16.0 -scp==0.10.2 -ipaddress==1.0.16 -interruptingcow==0.6 -PyYAML==3.11 -pykwalify==1.5.0 -scapy==2.3.1 -enum34==1.1.2 -requests==2.9.1 -ecdsa==0.13 -pycrypto==2.6.1 -pypcap==1.1.5 diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt.b64 b/resources/tools/testbed-setup/ansible/roles/virl/files/salt.b64 deleted file mode 100644 index 5e76a8583b..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt.b64 +++ /dev/null @@ -1,27 +0,0 @@ -H4sIAF7JK1cAA+1a32/bNhD2a/RXcMmDkyGy9VuDsQwDhhUoNuxhHfbSFQYj0TZrSVRJyklQ9H/f -UZZsGbUj27HVduOXBzvkmUfyuzveURI4kcPeeWEBwtBXn3boW83PGj3bCS3P9v3QcnuW7YJAD/ln -nleJQkjMEeolLMIJjlOabZdr6/9GIRT/gi/OaQOH8O+HgeI/8GzNfxdY8S/OFwgO598LLE/z3wU2 -+Y/mjAhJ+GkNoeTf34d/LwwskLPB/V3NfxfYwX82EaYgfEH4QCTihToUwYFl7eTfBrJr/l0X+Hds -R/FvnWSFLfif80+zKCliMjIQMlFN/6BBP81gg5JkZ3/EsgmdFpwYX3opGkdgh//HmUix+HAC5++1 -+7/lr+O/4zng/5YfeNr/u8B2/6/p1879X0fr+X+CVHD//M9XH8r/IRHU+V8XaOd/FQOOPgza4n/o -N/j3FP+uHdo6/ncBxbQK/hOakEFMOYkk40+qRR0IBdjACHHGZNUw5azIN1pSBqcHAvc2DDXWUEQc -y2h2gjHtMAyrQTlrG29BebI5XqOlOUcioyF5zBmX63WnOMNTEo82xAPPq/6XJM0TLKHtPc3e46pV -sIJH0HapPGc03Oo7anRRq7s0DOgaL7vGvMgymk2VTtVCIzJoNCkFGU5heDXanPCMJNWghlHkMcxm -3FhFlMbq15u/XPZPBDI53nl+t/t/VQC8IBUs/d/zdtd/QbjK/3xL5X9OoOK/9v/z4zPzQhXfypby -+bSu/9beIeY0H4MgnTyN0F+8IFU7JxNOxGyEXuFEkBYb/tLL1qjQ7v/LGPYSHeUZ/1z9t87/LNsK -1P2PH+j7v06wL//VYXOUjpb4D1lf2OBfxX/XcXT93wmu0EZGhOSMIBxFRAgEib/kLEEJFRJNGC9z -JfEE9pEK9DCj0Qyl+AndkyrTILFxdXEhGfrj1RsUJZRkUgwQekNqAXHt3wyMK+MK/fqIIaUi5agg -vXAQzuLymzuC7tIgZywlAi0xY0Kqo8S+5g+34imLbjM2FsW95ISMoxmJ5jcrGeeasx0yW3V7K41g -9F6lEE2FGM75vU9XGieCxnfWbcSZEGkmt42+Hqae/efDbJtUM3G++PgRKV98289pkmA+mBLZf3fd -V+nsKHHGGZEPjM/7t5XUlGM4omupDYG+HToDOxjYA2voeH10c4M+fVITgTmobHssPhRYzLbs5X5z -cFon4TRm4Zx2Fm7bTrhbdsI9dA51+XFx8b0yq1bxL+3OB+P5+9/TPAc85Pmf44Xq/sfS5383aOH/ -5Zc/vfb7Hyewa/4D2/JU/ed7vj7/u0B5+tOMymHzzv9MNyO1VS1TyqbCS6PtHqSS/vYi7NeNFv9/ -efHXO6T+g/iv3v9zbNvT8b8T7MV/01OP0NFW/4V2UPPvh56t6j/f0vVfJ7hCC5qOBIEKT94VudoM -iaS4cxCRIyMmUJXQXFKWocu/X//5ex2GLw1cyBlUUJe/YA4Wk6HflpaDfqxt6OeIioiBzaQ/QXRf -DgzDQHBPyIIk6K3jev476GD5Zvt3yw6DE5Hjh8wwyCOJ0LAQfCjuaVZbIzJj9I9R12sm3rNoGU/h -vHrAT621S0NwXUhBYlJVDy/R3V44NSXXBdRR2t19V75NcF04bddtZsxUhbdYfgXKWLKA70JyGkmT -8RhMwjSBttikGVjFBEdECZPHiORy3XaXMGjNaWyqkHM3lGk+VPM369gDXSCgItBSYmMWy6uqu+f2 -YULBTscql1gK79iFLWL9HwblX//z1e+hVxCYc9yueJvcM5pjlsKv71hO1P18NC/D0xHJURn2VQ54 -+tCyQnn+H/j+t+Xo878LrPj/ut7/Lus/zf/5sck/rA6O+kF8hve/D+I/cAJL898FdvAvIYUrV3xs -zt9E2/N/y6uf/7hh4Dtl/aff/+4GKpcq77TL90jQPRZkee+CTLSuC/Wti4aGhoaGhoaGhoaGhoaG -hoaGhoaGhsa3hH8BeOCWxQBQAAA= diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/etc/salt/minion.d/testlocal.conf b/resources/tools/testbed-setup/ansible/roles/virl/files/salt/etc/salt/minion.d/testlocal.conf deleted file mode 100644 index fce910cc0b..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/etc/salt/minion.d/testlocal.conf +++ /dev/null @@ -1,3 +0,0 @@ -file_roots: - base: - - /srv/salt/ diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server.sls b/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server.sls deleted file mode 100644 index bf3e47f9b3..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server.sls +++ /dev/null @@ -1,3 +0,0 @@ -include: - - ckoester.nfs-server.install - - ckoester.nfs-server.configure diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/configure.sls b/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/configure.sls deleted file mode 100644 index ce362a38b2..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/configure.sls +++ /dev/null @@ -1,31 +0,0 @@ -/nfs: - file.directory: - - user: root - - group: root - - mode: 755 - -/nfs/scratch: - file.directory: - - user: root - - group: root - - mode: 1777 - -/nfs/ro: - file.directory: - - user: virl - - group: virl - - mode: 755 - -/etc/exports: - file.managed: - - mode: 644 - - template: jinja - - source: "salt://ckoester/nfs-server/files/exports" - -nfs_server_running: - service.running: - - name: nfs-kernel-server - -update_exports: - cmd.run: - - name: exportfs -ra diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/files/exports b/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/files/exports deleted file mode 100644 index 23802be486..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/files/exports +++ /dev/null @@ -1,12 +0,0 @@ -# /etc/exports: the access control list for filesystems which may be exported -# to NFS clients. See exports(5). -# -# Example for NFSv2 and NFSv3: -# /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) -# -# Example for NFSv4: -# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) -# /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) -# -/nfs/scratch {{ salt['pillar.get']('virl:l2_network', salt['grains.get']('l2_network', '172.16.1.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l2_network2', salt['grains.get']('l2_network2', '172.16.2.0/24' )) }}(rw,no_root_squash,no_subtree_check) {{ salt['pillar.get']('virl:l3_network', salt['grains.get']('l3_network', '172.16.3.0/24' )) }}(rw,no_root_squash,no_subtree_check) -/nfs/ro *(ro,no_root_squash,no_subtree_check) diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/install.sls b/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/install.sls deleted file mode 100644 index 0f136346f8..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/salt/srv/salt/ckoester/nfs-server/install.sls +++ /dev/null @@ -1,5 +0,0 @@ -nfs-kernel-server install: - pkg.installed: - - skip_verify: True - - refresh: False - - name: nfs-kernel-server diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_jenkins-in b/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_jenkins-in deleted file mode 100644 index 1797c2c636..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_jenkins-in +++ /dev/null @@ -1 +0,0 @@ -jenkins-in ALL=(root) NOPASSWD: /bin/rm -fr /scratch/*, /bin/rm -fr /nfs/scratch/* diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_virl b/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_virl deleted file mode 100644 index e0cf48ac10..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/sudoers_virl +++ /dev/null @@ -1 +0,0 @@ -virl ALL=(root) NOPASSWD:ALL diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/ttyS0 b/resources/tools/testbed-setup/ansible/roles/virl/files/ttyS0 deleted file mode 100644 index 0ed8550190..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/ttyS0 +++ /dev/null @@ -1,10 +0,0 @@ -# ttyS0 - getty -# -# This service maintains a getty on ttyS0 from the point the system is -# started until it is shut down again. - -start on stopped rc RUNLEVEL=[12345] -stop on runlevel [!12345] - -respawn -exec /sbin/getty -L 115200 ttyS0 vt102 diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl b/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl deleted file mode 100644 index b4c3de745b..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl +++ /dev/null @@ -1,27 +0,0 @@ ------BEGIN RSA PRIVATE KEY----- -MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb -v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd -vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2 -4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc -1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs -8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7 -0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN -EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN -0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU -MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD -p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW -79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG -OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD -GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef -bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg -8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu -f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u -UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/ -+m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT -D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/ -sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn -g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY -qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8 -EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD -BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN ------END RSA PRIVATE KEY----- diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl.pub b/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl.pub deleted file mode 100644 index 0ef508c8a1..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/id_rsa_virl.pub +++ /dev/null @@ -1 +0,0 @@ -ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDBQOVOnNIenAtCi1k4VLgCBw80RYKc/UAHaFYWa8j7wpqH+Bu/yu5lT1GqE+znq3IrPFuG82RjhVsfkXUaKUdm7eYurMzgp+CEyZp4wSM7VPsFhh2+4F9O8iW6WN9Da8CWdisPCf4KXEmTzWbSkOC+ssRfipVWHawaHtQSRjLmvzYM1rbhWPM8HUn9zxr3M/wWhlSFgjMXgUu9EyNQAOlsxeAkywalpkubP3lqnQSi3u9vUJzUu8X3uLIEKu0g5IpEoDnRmEsaMwqY7CdhT5w/nvXy1umugNWLpUk6jvN65fJ60yzxgGX2RZuVYb0Go/2Ny0W+yaLkbuFeCrVjy74P virl@tb4-virl diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ifup b/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ifup deleted file mode 100644 index a4a743ac63..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ifup +++ /dev/null @@ -1,25 +0,0 @@ -#! /bin/sh -# Reload the OpenSSH server when an interface comes up, to allow it to start -# listening on new addresses. - -set -e - -# Don't bother to restart sshd when lo is configured. -if [ "$IFACE" = lo ]; then - exit 0 -fi - -# Only run from ifup. -if [ "$MODE" != start ]; then - exit 0 -fi - -if [ "$IFACE" = br1 ]; then - /sbin/ip route delete default - /sbin/ip route add default via 10.30.51.1 - /sbin/ifconfig br1:0 {{ virl_l2_ip }} netmask 255.255.255.0 - exit 0 -fi - - -exit 0 diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ssh_environment b/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ssh_environment deleted file mode 100644 index 5ec594d181..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/ssh_environment +++ /dev/null @@ -1 +0,0 @@ -PATH=/home/jenkins-in/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games diff --git a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/virl-bootstrap-wrapper b/resources/tools/testbed-setup/ansible/roles/virl/files/virl/virl-bootstrap-wrapper deleted file mode 100644 index dc7ead804d..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/files/virl/virl-bootstrap-wrapper +++ /dev/null @@ -1,58 +0,0 @@ -#!/usr/bin/expect - -if ![ string equal $::env(USER) "root"] { - puts "Please re-run this script as root." - exit 1 -} - -log_file /tmp/virl-bootstrap.log -set timeout 3600 - -spawn ./virl-bootstrap.py -expect "Which step are you on" -send "1\r" - -expect "Salt master" -send "vsm-md.virl.info\r" - -expect "Which step are you on" -send "2\r" - -expect "Salt id" -send "{{ hostname }}\r" -expect "Salt domain name" -send "linuxfoundation.org\r" - -expect "Which step are you on" -send "3\r" - -expect "System hostname" -send "{{ hostname }}\r" -expect "System Domain name" -send "linuxfoundation.org\r" - -expect "Which step are you on" -send "4\r" - -puts "*******************STEP 6*************************************************************************************************************************************************" -expect "Which step are you on" -send "6\r" -expect "Salt installed" - -puts "*******************STEP 8*************************************************************************************************************************************************" -expect "Which step are you on" -send "8\r" - -expect "True" - -puts "*******************STEP 9*************************************************************************************************************************************************" -expect "Which step are you on" -send "9\r" - -expect "Failed: 0" - -puts "*******************STEP 11*************************************************************************************************************************************************" -expect "Which step are you on" -send "11\r" - -expect eof diff --git a/resources/tools/testbed-setup/ansible/roles/virl/tasks/02-virl-bootstrap.yaml b/resources/tools/testbed-setup/ansible/roles/virl/tasks/02-virl-bootstrap.yaml deleted file mode 100644 index 9ffb40caaf..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/tasks/02-virl-bootstrap.yaml +++ /dev/null @@ -1,216 +0,0 @@ ---- - - name: install virl-bootstrap - git: - repo: 'https://github.com/VIRL-Open/virl-bootstrap.git' - dest: /home/virl/virl-bootstrap - version: xenial - become_user: virl - - name: copy vsetting file to /etc - shell: /usr/bin/install -m 666 /home/virl/virl-bootstrap/vsettings.ini /etc/virl.ini - become: yes - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT hostname {{ hostname }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT domain_name linuxfoundation.org - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT using_dhcp_on_the_public_port False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_port dummy3 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT Static_IP 10.30.49.28 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_network 10.30.49.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_netmask {{ ansible_default_ipv4["netmask"] }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT public_gateway 10.30.49.1 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT proxy False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT ntp_server pool.ntp.org - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_nameserver 199.204.44.24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_nameserver 199.204.47.54 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_master vsm-md.virl.info - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_id {{ hostname }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_domain linuxfoundation.org - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT salt_masterless false - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port {{ virl_public_port }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network {{ virl_l2_network }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_mask 255.255.255.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network_gateway {{ virl_l2_gateway }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_start_address {{ virl_l2_start }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_end_address {{ virl_l2_end }} - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_address {{ ansible_default_ipv4["address"] }}/24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_flat_nameserver 199.204.44.24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_flat_nameserver 199.204.47.54 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port2_enabled True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_port2 dummy0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network2 172.16.2.0/24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_mask2 255.255.255.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_network_gateway2 172.16.2.1 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_start_address2 172.16.2.50 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_end_address2 172.16.2.253 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l2_address2 172.16.2.254/24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_flat2_nameserver 199.204.44.24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_flat2_nameserver 199.204.47.54 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_port dummy1 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_network 172.16.3.0/24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_mask 255.255.255.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_network_gateway 172.16.3.1 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_floating_start_address 172.16.3.50 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_floating_end_address 172.16.3.253 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT l3_address 172.16.3.254/24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT first_snat_nameserver 199.204.44.24 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT second_snat_nameserver 199.204.47.54 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT ramdisk True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT ank 19401 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT ank_live 19402 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_webservices 19399 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_user_management 19400 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_apache_port 80 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_webmux 19403 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT Start_of_serial_port_range 17000 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT End_of_serial_port_range 18000 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT serial_port 19406 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vnc_port 19407 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT location_region US - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vnc False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT guest_account True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT user_list tb4-virl:Cisco1234 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT uwmadmin_password Cisco1234 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT password password - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT mysql_password password - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT keystone_service_token fkgjhsdflkjh - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT enable_cinder True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_file True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_size 20000 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT cinder_location /var/lib/cinder/cinder-volumes.lvm - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT dummy_int True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT this_node_is_the_controller True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_controller_hostname controller - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_controller_IP 172.16.10.250 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_port dummy2 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_IP 172.16.10.250 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_network 172.16.10.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_netmask 255.255.255.0 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT internalnet_gateway 172.16.10.1 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosv True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT csr1000v True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv432 False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv52 False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosxrv True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT nxosv True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vpagent True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT iosvl2 True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT asav True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_server True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_iperf True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_routem True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT lxc_ostinato True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT server True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_mac True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_win32 True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_win64 True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT vmm_linux True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT virl_clients True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT ram_overcommit 2 - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT web_editor True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT mitaka True - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT kilo False - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT libvirt_cpu_mode host-passthrough - become_user: virl - - command: crudini --inplace --set /etc/virl.ini DEFAULT neutron_bridge_flooding True - become_user: virl - - name: copy vinstall bootstrap wrapper script - template: src=files/virl/virl-bootstrap-wrapper dest=/home/virl/virl-bootstrap/virl-bootstrap-wrapper owner=virl group=virl mode=775 - become_user: virl diff --git a/resources/tools/testbed-setup/ansible/roles/virl/tasks/03-virl-post-install.yaml b/resources/tools/testbed-setup/ansible/roles/virl/tasks/03-virl-post-install.yaml deleted file mode 100644 index 58b70c9173..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/tasks/03-virl-post-install.yaml +++ /dev/null @@ -1,92 +0,0 @@ ---- - - name: Add jenkins-in user - user: name=jenkins-in shell=/bin/bash comment="Jenkins user" - - name: Add jenkins-in user to sudoers - copy: src=files/sudoers_jenkins-in dest=/etc/sudoers.d/jenkins-in owner=root group=root mode=660 - - name: Set Jenkins user authorized key - authorized_key: user=jenkins-in key="{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" - - name: copy salt states for dnsmasq and nfs - synchronize: src=files/salt/ dest=/ - - name: install NFS salt - shell: salt-call --local state.sls ckoester.nfs-server - - name: NFS symlink - shell: ln -s /nfs/scratch /scratch - args: - creates: /scratch - - name: Upate Nova CPU mode - ini_file: dest=/etc/nova/nova.conf section=libvirt option=cpu_mode value=host-passthrough - - name: Restart nova-compute service - service: name=nova-compute state=restarted - - name: Change listen interface in NTP settings - lineinfile: dest=/etc/ntp.conf state=present regexp='^interface listen 172.16.*' line='interface listen {{ ansible_default_ipv4["address"] }}' - - name: Restart NTP service - service: name=ntp state=restarted - - name: Permit SSH user environment - lineinfile: dest=/etc/ssh/sshd_config state=present regexp='PermitUserEnvironment.*' line='PermitUserEnvironment yes' - - name: Restart SSH daemon - service: name=ssh state=restarted - - name: clone csit git repository - git: repo=https://gerrit.fd.io/r/csit - dest=/home/jenkins-in/git/csit - become: jenkins-in - - name: Link testcase-infra directory - command: ln -sf /home/jenkins-in/git/csit/resources/tools/virl /home/jenkins-in/testcase-infra - args: - creates: /home/jenkins-in/testcase-infra - become: jenkins-in - - name: Create bin directory - file: path=/home/jenkins-in/bin state=directory mode=0755 - become: jenkins-in - - name: Link start-testcase executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/start-testcase /home/jenkins-in/bin/start-testcase - args: - creates: /home/jenkins-in/bin/start-testcase - become: jenkins-in - - name: Link stop-testcase executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/stop-testcase /home/jenkins-in/bin/stop-testcase - args: - creates: /home/jenkins-in/bin/stop-testcase - become: jenkins-in - - name: Link start-testcase-DMM executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/start-testcase-DMM /home/jenkins-in/bin/start-testcase-DMM - args: - creates: /home/jenkins-in/bin/start-testcase-DMM - become: jenkins-in - - name: Link kill-idle-testcases executable - command: ln -sf /home/jenkins-in/testcase-infra/bin/kill-idle-testcases /home/jenkins-in/bin/kill-idle-testcases - args: - creates: /home/jenkins-in/bin/kill-idle-testcases - become: jenkins-in - - name: Copy SSH private key - copy: src=files/virl/id_rsa_virl dest=/home/jenkins-in/.ssh/id_rsa_virl mode=600 - become: jenkins-in - - name: Copy SSH public key - copy: src=files/virl/id_rsa_virl.pub dest=/home/jenkins-in/.ssh/id_rsa_virl.pub mode=644 - become: jenkins-in - - name: Copy SSH environment - copy: src=files/virl/ssh_environment dest=/home/jenkins-in/.ssh/environment mode=644 - become: jenkins-in - - name: Add ~/bin to path - lineinfile: dest=/home/jenkins-in/.bashrc state=present line='PATH=${HOME}/bin:$PATH' - become: jenkins-in - - name: Update own IP address in start script - shell: sed -i /home/jenkins-in/testcase-infra/bin/start-testcase -e 's/10.30.51.28/{{ ansible_default_ipv4["address"] }}/' - become: jenkins-in - - name: Add authorized key - lineinfile: dest=/home/jenkins-in/.ssh/authorized_keys line='ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQD4gderzsZyoxHULjuvPHoJuKnkaGrykqtuoqs/k1/jUdxitPoY5eX2cVYqww7MiUif7zLsiXbt5mHtyxAYCluDxAuIcy1xgSZY3MpmmSqDie4A/FdVfCUqCcpf3TZKsRP0an1MNrKIe0JFZV+uU889IDRQRdboGMs3+4cn5b9fOutpv71qwFVrTm9PZbqfQonrrN8Jp4Mz3XaZDpK22xwDAWhYOZ0eV6CJWquUgbYAHE6/HHMvd0zeJKaWZCXO/1tOGOj6cjgoViHqbnCtmYCjmv/ir0IglzbUdWdOqQY5YkhnPonveV48lVKrmBipqgbDezAUQD8wOQ7HttpYpKgt jenkins-in@tb4-virl' - become: jenkins-in -# All of the below will fail if VIRL user/project already exist - - name: Create VIRL project - shell: virl_uwm_client project-edit --name tb4-virl --enabled True -i 400 -r 1024000 -c 500 - ignore_errors: true - become: virl -# - name: Delete VIRL project user -# shell: virl_uwm_client user-delete --name tb4-virl -# ignore_errors: true -# - name: Recreate VIRL project user -# shell: virl_uwm_client user-create --name tb4-virl --role admin --project tb4-virl --set-password Cisco1234 -# ignore_errors: true - - name: Create VPP flavor - shell: virl_uwm_client flavor-create --name vPP --ram 4096 --vcpus 2 --disk 0 - ignore_errors: true - become: virl diff --git a/resources/tools/testbed-setup/ansible/roles/virl/tasks/04-disk-image.yaml b/resources/tools/testbed-setup/ansible/roles/virl/tasks/04-disk-image.yaml deleted file mode 100644 index 254c05e709..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/tasks/04-disk-image.yaml +++ /dev/null @@ -1,27 +0,0 @@ ---- - - name: Create server image directory - file: path=/home/virl/virl-server-image state=directory mode=0755 - become: virl - - name: Copy UBUNTU server image - copy: src=/home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu dest=/home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu owner=virl group=virl mode=644 - become: virl - - name: Copy CENTOS server image - copy: src=/home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu dest=/home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu owner=virl group=virl mode=644 - become: virl - - name: Import UBUNTU server image into glance - shell: virl_uwm_client image-create --subtype server --version csit-ubuntu-16.04.1_2017-10-21_2.0 --image-on-server /home/virl/virl-server-image/packer-csit-ubuntu-16.04.1_2017-10-21_2.0-qemu - become: virl - - name: Import CENTOS server image into glance - shell: virl_uwm_client image-create --subtype server --version csit-centos-7.3-1611_2017-02-23_1.4 --image-on-server /home/virl/virl-server-image/packer-csit-centos-7.3-1611_2017-02-23_1.4-qemu - become: virl - - name: Create common directory - file: path=/nfs/common state=directory mode=0755 - - name: Create Nested VM directory - file: path=/nfs/common/nested-vm state=directory mode=0755 - - name: Copy Nested VM image - copy: src=/home/virl/virl-server-image/csit-nested-1.6.img dest=/nfs/common/nested-vm/csit-nested-1.6.img owner=virl group=virl mode=644 - - name: NFS symlink - file: - src: /nfs/common/nested-vm-current.img.disabled - dest: /nfs/common/nested-vm/csit-nested-1.6.img - state: link diff --git a/resources/tools/testbed-setup/ansible/roles/virl/tasks/main.yaml b/resources/tools/testbed-setup/ansible/roles/virl/tasks/main.yaml deleted file mode 100644 index 8bca04e163..0000000000 --- a/resources/tools/testbed-setup/ansible/roles/virl/tasks/main.yaml +++ /dev/null @@ -1,78 +0,0 @@ ---- -- name: Interfaces file - template: - src: "files/interfaces_virl" - dest: "/etc/network/interfaces owner=root group=root mode=644" - tags: interfaces - -- name: Add VIRL user - user: - name: virl - shell: "/bin/bash" - comment: "VIRL user" - password: "$6$mJPlK5FKLar6$xxXPP0LRhC7T1yhHtym18Z3nKZweTtfTxzi1WpvVHJ0U/Em1UWcHqfMhRApFp0rsY9jHRuL6FfeFbKPN..uDK." - tags: users - -- name: Add VIRL user to sudoers - copy: - src: "files/sudoers_virl" - dest: "/etc/sudoers.d/virl owner=root group=root mode=660" - tags: sudoers - -- name: Add post up for additional address - copy: - src: "files/ifup" - dest: "/etc/network/if-up.d/virl owner=root group=root mode=755" - tags: interfaces - -- name: Set VIRL user authorized key - authorized_key: - user: virl - key: "{{ lookup('file', '/home/testuser/.ssh/id_rsa.pub') }}" - tags: users - -- name: Install bridge-utils - apt: - name: "bridge-utils" - state: "present" - tags: apt-install-bridge-utils - -- name: Old interface naming - command: "ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules" - tags: interfaces - -- name: Update init for old interface naming - command: "update-initramfs -u" - tags: interfaces - -- name: QEMU log garbage collector - cron: - minute: "0" - hour: "0" - name: "QEMU log garbage collector" - job: "find /var/log/libvirt/qemu -type f -mtime +14 -name 'instance*.log' -delete" - tags: cron - -- name: VPP deb package garbage collector - cron: - minute: "0" - hour: "0" - name: "VPP deb package garbage collector" - job: "find /tmp -type f -atime +14 -name '*.deb' -delete" - tags: cron - -- name: VPP rpm package garbage collector - cron: - minute: "0" - hour: "0" - name: "VPP rpm package garbage collector" - job: "find /tmp -type f -atime +14 -name '*.rpm' -delete" - tags: cron - -- name: NFS scratch dir garbage collector - cron: - minute: "0" - hour: "0" - name: "NFS scratch dir garbage collector" - job: "find /nfs/scratch/ -type d -mtime +1 -name 'session-*' -exec rm -r '{}' \\;" - tags: cron diff --git a/resources/tools/testbed-setup/ansible/site.yaml b/resources/tools/testbed-setup/ansible/site.yaml index 1f59505168..f2f68c6bb7 100644 --- a/resources/tools/testbed-setup/ansible/site.yaml +++ b/resources/tools/testbed-setup/ansible/site.yaml @@ -9,6 +9,3 @@ - import_playbook: vpp_device.yaml tags: vpp-device - -#- import_playbook: virl.yaml -# tags: virl diff --git a/resources/tools/testbed-setup/ansible/virl.yaml b/resources/tools/testbed-setup/ansible/virl.yaml deleted file mode 100644 index 5e57d585a4..0000000000 --- a/resources/tools/testbed-setup/ansible/virl.yaml +++ /dev/null @@ -1,10 +0,0 @@ ---- -# file: virl.yaml - -- hosts: virl - remote_user: testuser - become: yes - become_user: root - roles: - - common - - virl |