diff options
Diffstat (limited to 'resources/traffic_profiles')
3 files changed, 411 insertions, 0 deletions
diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py new file mode 100755 index 0000000000..2f8b782ca6 --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py @@ -0,0 +1,137 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 10.10.10.0 - 10.10.10.99 + - Destination IP address range: 20.20.20.0 - 20.20.20.99 + - Source UDP port range: 1001 - 2000 + - Destination UDP port range: 2001 - 3000 + - Direction 1 --> 0: + - Source IP address range: 20.20.20.0 - 20.20.20.99 + - Destination IP address range: 10.10.10.0 - 10.10.10.99 + - Source UDP port range: 2001-3000 + - Destination UDP port range: 1001 - 2000 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.10.10.0' + self.p1_src_end_ip = '10.10.10.99' + self.p1_dst_start_ip = '20.20.20.0' + self.p1_dst_end_ip = '20.20.20.99' + + self.p2_src_start_ip = '20.20.20.0' + self.p2_src_end_ip = '20.20.20.99' + self.p2_dst_start_ip = '10.10.10.0' + self.p2_dst_end_ip = '10.10.10.99' + + # UDP ports used in packet headers. + self.p1_src_start_udp_port = 1001 + self.p1_src_end_udp_port = 2000 + self.p1_dst_start_udp_port = 2001 + self.p1_dst_end_udp_port = 3000 + + self.p2_src_start_udp_port = 2001 + self.p2_src_end_udp_port = 3000 + self.p2_dst_start_udp_port = 1001 + self.p2_dst_end_udp_port = 2000 + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | UDP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=17) / + UDP(sport=self.p1_src_start_udp_port, + dport=self.p1_dst_start_udp_port)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=17) / + UDP(sport=self.p2_src_start_udp_port, + dport=self.p2_dst_start_udp_port)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p1_src_start_ip, + ip_max=self.p1_src_end_ip, + port_min=self.p1_src_start_udp_port, + port_max=self.p1_src_end_udp_port, + name="tuple1_src"), + STLVmTupleGen(ip_min=self.p1_dst_start_ip, + ip_max=self.p1_dst_end_ip, + port_min=self.p1_dst_start_udp_port, + port_max=self.p1_dst_end_udp_port, + name="tuple1_dst"), + STLVmWrFlowVar(fv_name="tuple1_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple1_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple1_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple1_dst.port", pkt_offset="UDP.dport") + ]) + # Direction 0 --> 1 + vm2 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p2_src_start_ip, + ip_max=self.p2_src_end_ip, + port_min=self.p2_src_start_udp_port, + port_max=self.p2_src_end_udp_port, + name="tuple2_src"), + STLVmTupleGen(ip_min=self.p2_dst_start_ip, + ip_max=self.p2_dst_end_ip, + port_min=self.p2_dst_start_udp_port, + port_max=self.p2_dst_end_udp_port, + name="tuple2_dst"), + STLVmWrFlowVar(fv_name="tuple2_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple2_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple2_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple2_dst.port", pkt_offset="UDP.dport") + ]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py new file mode 100755 index 0000000000..b0362aedcd --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py @@ -0,0 +1,137 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 10.10.10.0 - 10.10.10.9 + - Destination IP address range: 20.20.20.0 - 20.20.20.9 + - Source UDP port range: 1001 - 2000 + - Destination UDP port range: 2001 - 3000 + - Direction 1 --> 0: + - Source IP address range: 20.20.20.0 - 20.20.20.9 + - Destination IP address range: 10.10.10.0 - 10.10.10.9 + - Source UDP port range: 2001-3000 + - Destination UDP port range: 1001 - 2000 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.10.10.0' + self.p1_src_end_ip = '10.10.10.9' + self.p1_dst_start_ip = '20.20.20.0' + self.p1_dst_end_ip = '20.20.20.9' + + self.p2_src_start_ip = '20.20.20.0' + self.p2_src_end_ip = '20.20.20.9' + self.p2_dst_start_ip = '10.10.10.0' + self.p2_dst_end_ip = '10.10.10.9' + + # UDP ports used in packet headers. + self.p1_src_start_udp_port = 1001 + self.p1_src_end_udp_port = 2000 + self.p1_dst_start_udp_port = 2001 + self.p1_dst_end_udp_port = 3000 + + self.p2_src_start_udp_port = 2001 + self.p2_src_end_udp_port = 3000 + self.p2_dst_start_udp_port = 1001 + self.p2_dst_end_udp_port = 2000 + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | UDP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=17) / + UDP(sport=self.p1_src_start_udp_port, + dport=self.p1_dst_start_udp_port)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=17) / + UDP(sport=self.p2_src_start_udp_port, + dport=self.p2_dst_start_udp_port)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p1_src_start_ip, + ip_max=self.p1_src_end_ip, + port_min=self.p1_src_start_udp_port, + port_max=self.p1_src_end_udp_port, + name="tuple1_src"), + STLVmTupleGen(ip_min=self.p1_dst_start_ip, + ip_max=self.p1_dst_end_ip, + port_min=self.p1_dst_start_udp_port, + port_max=self.p1_dst_end_udp_port, + name="tuple1_dst"), + STLVmWrFlowVar(fv_name="tuple1_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple1_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple1_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple1_dst.port", pkt_offset="UDP.dport") + ]) + # Direction 0 --> 1 + vm2 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p2_src_start_ip, + ip_max=self.p2_src_end_ip, + port_min=self.p2_src_start_udp_port, + port_max=self.p2_src_end_udp_port, + name="tuple2_src"), + STLVmTupleGen(ip_min=self.p2_dst_start_ip, + ip_max=self.p2_dst_end_ip, + port_min=self.p2_dst_start_udp_port, + port_max=self.p2_dst_end_udp_port, + name="tuple2_dst"), + STLVmWrFlowVar(fv_name="tuple2_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple2_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple2_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple2_dst.port", pkt_offset="UDP.dport") + ]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py new file mode 100755 index 0000000000..76ccb53259 --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py @@ -0,0 +1,137 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 10.10.10.0 - 10.10.10.9 + - Destination IP address range: 20.20.20.0 - 20.20.20.9 + - Source UDP port range: 1001 - 1010 + - Destination UDP port range: 2001 - 2010 + - Direction 1 --> 0: + - Source IP address range: 20.20.20.0 - 20.20.20.9 + - Destination IP address range: 10.10.10.0 - 10.10.10.9 + - Source UDP port range: 2001-2010 + - Destination UDP port range: 1001 - 1010 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.10.10.0' + self.p1_src_end_ip = '10.10.10.9' + self.p1_dst_start_ip = '20.20.20.0' + self.p1_dst_end_ip = '20.20.20.9' + + self.p2_src_start_ip = '20.20.20.0' + self.p2_src_end_ip = '20.20.20.9' + self.p2_dst_start_ip = '10.10.10.0' + self.p2_dst_end_ip = '10.10.10.9' + + # UDP ports used in packet headers. + self.p1_src_start_udp_port = 1001 + self.p1_src_end_udp_port = 1010 + self.p1_dst_start_udp_port = 2001 + self.p1_dst_end_udp_port = 2010 + + self.p2_src_start_udp_port = 2001 + self.p2_src_end_udp_port = 2010 + self.p2_dst_start_udp_port = 1001 + self.p2_dst_end_udp_port = 1010 + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | UDP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=17) / + UDP(sport=self.p1_src_start_udp_port, + dport=self.p1_dst_start_udp_port)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=17) / + UDP(sport=self.p2_src_start_udp_port, + dport=self.p2_dst_start_udp_port)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p1_src_start_ip, + ip_max=self.p1_src_end_ip, + port_min=self.p1_src_start_udp_port, + port_max=self.p1_src_end_udp_port, + name="tuple1_src"), + STLVmTupleGen(ip_min=self.p1_dst_start_ip, + ip_max=self.p1_dst_end_ip, + port_min=self.p1_dst_start_udp_port, + port_max=self.p1_dst_end_udp_port, + name="tuple1_dst"), + STLVmWrFlowVar(fv_name="tuple1_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple1_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple1_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple1_dst.port", pkt_offset="UDP.dport") + ]) + # Direction 0 --> 1 + vm2 = STLScVmRaw([ + STLVmTupleGen(ip_min=self.p2_src_start_ip, + ip_max=self.p2_src_end_ip, + port_min=self.p2_src_start_udp_port, + port_max=self.p2_src_end_udp_port, + name="tuple2_src"), + STLVmTupleGen(ip_min=self.p2_dst_start_ip, + ip_max=self.p2_dst_end_ip, + port_min=self.p2_dst_start_udp_port, + port_max=self.p2_dst_end_udp_port, + name="tuple2_dst"), + STLVmWrFlowVar(fv_name="tuple2_src.ip", pkt_offset="IP.src"), + STLVmWrFlowVar(fv_name="tuple2_dst.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple2_src.port", pkt_offset="UDP.sport"), + STLVmWrFlowVar(fv_name="tuple2_dst.port", pkt_offset="UDP.dport") + ]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() |