diff options
Diffstat (limited to 'resources')
4 files changed, 313 insertions, 13 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index e6014b38f7..88847b598d 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -193,10 +193,10 @@ | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} -| Initialize IPv4 forwarding with scaling in 3-node circular topology +| Initialize IPv4 forwarding with scaling in circular topology | | [Documentation] | | ... | Custom setup of IPv4 topology with scalability of ip routes on all -| | ... | DUT nodes in 3-node circular topology +| | ... | DUT nodes in 2-node / 3-node circular topology | | ... | | ... | *Arguments:* | | ... | - ${count} - IP route count. Type: integer @@ -211,26 +211,44 @@ | | ... | | [Arguments] | ${count} | | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ... | | Set interfaces in path up +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} | | Add arp on dut | ${dut1} | ${dut1_if1} | 1.1.1.1 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} -| | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} -| | Add arp on dut | ${dut2} | ${dut2_if2} | 3.3.3.1 | ${tg1_if2_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut1} | ${dut1_if2} | 2.2.2.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Add arp on dut | ${dut2} | ${dut2_if1} | 2.2.2.1 | ${dut1_if2_mac} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | Add arp on dut | ${dut} | ${dut_if2} | 3.3.3.1 | ${tg1_if2_mac} | | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} | 1.1.1.2 | 30 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2} | 3.3.3.2 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 2.2.2.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 2.2.2.2 | 30 +| | Configure IP addresses on interfaces | ${dut} | ${dut_if2} | 3.3.3.2 | 30 | | Vpp Route Add | ${dut1} | 10.0.0.0 | 32 | 1.1.1.1 | ${dut1_if1} | | ... | count=${count} -| | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | 2.2.2.2 | ${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.0.0.0 | 32 | 2.2.2.2 | ${dut1_if2} | | ... | count=${count} -| | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | 2.2.2.1 | ${dut2_if1} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.0.0.0 | 32 | 2.2.2.1 | ${dut2_if1} | | ... | count=${count} -| | Vpp Route Add | ${dut2} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut2_if2} +| | Vpp Route Add | ${dut} | 20.0.0.0 | 32 | 3.3.3.1 | ${dut_if2} | | ... | count=${count} | Initialize IPv4 forwarding with vhost in 2-node circular topology diff --git a/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst10000.py b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst10000.py new file mode 100755 index 0000000000..c562a8e176 --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst10000.py @@ -0,0 +1,94 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.1 + - Destination IP address range: 20.0.0.0 - 20.0.39.15 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.1 + - Destination IP address range: 10.0.0.0 - 10.0.39.15 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.0.0.1' + self.p1_dst_start_ip = '20.0.0.0' + self.p1_dst_end_ip = '20.0.39.15' + + self.p2_src_start_ip = '20.0.0.1' + self.p2_dst_start_ip = '10.0.0.0' + self.p2_dst_end_ip = '10.0.39.15' + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + # Direction 1 --> 0 + vm2 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst100000.py b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst100000.py new file mode 100755 index 0000000000..da873f8746 --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst100000.py @@ -0,0 +1,94 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.1 + - Destination IP address range: 20.0.0.0 - 20.1.134.159 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.1 + - Destination IP address range: 10.0.0.0 - 10.1.134.159 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.0.0.1' + self.p1_dst_start_ip = '20.0.0.0' + self.p1_dst_end_ip = '20.1.134.159' + + self.p2_src_start_ip = '20.0.0.1' + self.p2_dst_start_ip = '10.0.0.0' + self.p2_dst_end_ip = '10.1.134.159' + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + # Direction 1 --> 0 + vm2 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst1000000.py b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst1000000.py new file mode 100755 index 0000000000..a75e17530c --- /dev/null +++ b/resources/traffic_profiles/trex/trex-sl-2n-ethip4-ip4dst1000000.py @@ -0,0 +1,94 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.1 + - Destination IP address range: 20.0.0.0 - 20.15.66.63 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.1 + - Destination IP address range: 10.0.0.0 - 10.15.66.63 +""" + +from trex_stl_lib.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = '10.0.0.1' + self.p1_dst_start_ip = '20.0.0.0' + self.p1_dst_end_ip = '20.15.66.63' + + self.p2_src_start_ip = '20.0.0.1' + self.p2_dst_start_ip = '10.0.0.0' + self.p2_dst_end_ip = '10.15.66.63' + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = (Ether() / + IP(src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61)) + # Direction 1 --> 0 + base_pkt_b = (Ether() / + IP(src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61)) + + # Direction 0 --> 1 + vm1 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + # Direction 1 --> 0 + vm2 = STLScVmRaw([STLVmFlowVar(name="dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="dst", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP")]) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() |