diff options
Diffstat (limited to 'resources')
| -rw-r--r-- | resources/libraries/robot/performance_configuration.robot (renamed from resources/libraries/robot/performance.robot) | 1304 | ||||
| -rw-r--r-- | resources/libraries/robot/performance_setup.robot | 501 | ||||
| -rw-r--r-- | resources/libraries/robot/performance_utils.robot | 545 |
3 files changed, 1214 insertions, 1136 deletions
diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance_configuration.robot index b934dc1d96..1141c34be4 100644 --- a/resources/libraries/robot/performance.robot +++ b/resources/libraries/robot/performance_configuration.robot @@ -29,200 +29,9 @@ | Resource | resources/libraries/robot/ipv6.robot | Resource | resources/libraries/robot/qemu.robot | Resource | resources/libraries/robot/tagging.robot -| Documentation | Performance suite keywords +| Documentation | Performance suite keywords - configuration. *** Keywords *** -| Calculate pps -| | [Documentation] -| | ... | Calculate pps for given rate and L2 frame size, -| | ... | additional 20B are added to L2 frame size as padding. -| | ... -| | ... | *Arguments* -| | ... | - bps - Rate in bps. Type: integer -| | ... | - framesize - L2 frame size in Bytes. Type: integer -| | ... -| | ... | *Return* -| | ... | - Calculated pps. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Calculate pps \| 10000000000 \| 64 \| -| | ... -| | [Arguments] | ${bps} | ${framesize} -| | ... -| | ${framesize}= | Get Frame Size | ${framesize} -| | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__() -| | Return From Keyword | ${ret} - -| Get Frame Size -| | [Documentation] -| | ... | Framesize can be either integer in case of a single packet -| | ... | in stream, or set of packets in case of IMIX type or simmilar. -| | ... | This keyword returns average framesize. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - Framesize. Type: integer or string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Get Frame Size \| IMIX_v4_1 \| -| | ... -| | [Arguments] | ${framesize} -| | ... -| | Run Keyword If | '${framesize}' == 'IMIX_v4_1' -| | ... | Return From Keyword | 353.83333 -| | Return From Keyword | ${framesize} - -| Set variables in 2-node circular topology -| | [Documentation] -| | ... | Compute path for testing on two given nodes in circular -| | ... | topology and set corresponding suite variables. -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - 1st DUT interface towards TG. -| | ... | - dut1_if2 - 2nd DUT interface towards TG. -| | ... -| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} -| | Compute Path | always_same_link=${FALSE} -| | ${tg_if1} | ${tg}= | First Interface -| | ${dut1_if1} | ${dut1}= | First Ingress Interface -| | ${dut1_if2} | ${dut1}= | Last Egress Interface -| | ${tg_if2} | ${tg}= | Last Interface -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} - -| Set variables in 3-node circular topology -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular -| | ... | topology and set corresponding suite variables. -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} -| | ... | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} -| | Set Suite Variable | ${dut2_if2} - -| Set variables in 2-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on two given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - 1st TG interface towards DUT. -| | ... | - tg_if2 - 2nd TG interface towards DUT. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - 1st DUT interface towards TG. -| | ... | - dut1_if2 - 2nd DUT interface towards TG. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 2-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path | always_same_link=${FALSE} -| | ${tg_if1} | ${tg}= | First Interface -| | ${dut1_if1} | ${dut1}= | First Ingress Interface -| | ${dut1_if2} | ${dut1}= | Last Egress Interface -| | ${tg_if2} | ${tg}= | Last Interface -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} - -| Set variables in 3-node circular topology with DUT interface model -| | [Documentation] -| | ... | Compute path for testing on three given nodes in circular topology -| | ... | based on interface model provided as an argument and set -| | ... | corresponding suite variables. -| | ... -| | ... | *Arguments:* -| | ... | - iface_model - Interface model. Type: string -| | ... -| | ... | _NOTE:_ This KW sets following suite variables: -| | ... | - tg - TG node -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. -| | ... | - dut1 - DUT1 node -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2 - DUT2 node -| | ... | - dut2_if1 - DUT2 interface towards TG. -| | ... | - dut2_if2 - DUT2 interface towards DUT1. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set variables in 3-node circular topology with DUT interface model\ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${iface_model} -| | ... -| | ${iface_model_list}= | Create list | ${iface_model} -| | Append Node | ${nodes['TG']} -| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} -| | Append Node | ${nodes['TG']} -| | Compute Path -| | ${tg_if1} | ${tg}= | Next Interface -| | ${dut1_if1} | ${dut1}= | Next Interface -| | ${dut1_if2} | ${dut1}= | Next Interface -| | ${dut2_if1} | ${dut2}= | Next Interface -| | ${dut2_if2} | ${dut2}= | Next Interface -| | ${tg_if2} | ${tg}= | Next Interface -| | Set Suite Variable | ${tg} -| | Set Suite Variable | ${tg_if1} -| | Set Suite Variable | ${tg_if2} -| | Set Suite Variable | ${dut1} -| | Set Suite Variable | ${dut1_if1} -| | Set Suite Variable | ${dut1_if2} -| | Set Suite Variable | ${dut2} -| | Set Suite Variable | ${dut2_if1} -| | Set Suite Variable | ${dut2_if2} - | Set interfaces in path in 2-node circular topology up | | [Documentation] | | ... | *Set UP state on VPP interfaces in path on nodes in 2-node circular @@ -564,89 +373,89 @@ | | ... | vrf=${fib_table_2} | | ${ip_base_start}= | Set Variable | ${4} | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${fib_table_1}= | Evaluate | ${100}+${number} -| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 -| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 -| | | ${ip_net_vif1}= | Set Variable -| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} -| | | ${ip_net_vif2}= | Set Variable -| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} -| | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 -| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up -| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up -| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} -| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} -| | | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} -| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut1_vif1_idx} multipath -| | | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} -| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut1_vif2_idx} multipath -| | | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} -| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut2_vif1_idx} multipath -| | | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} -| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut2_vif2_idx} multipath -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${fib_table_1} -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${fib_table_2} -| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if1} -| | | ... | ${fib_table_1} -| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} -| | | ... | ${fib_table_2} -| | | Configure IP addresses on interfaces -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 -| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 -| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif1_idx} -| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} -| | | ... | ${dut1_vif2_idx} -| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif1_idx} -| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} -| | | ... | ${dut2_vif2_idx} -| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1_vif1_mac} -| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} -| | | ... | ${dut1_vif2_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} -| | | ... | ${dut2_vif1_mac} -| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} -| | | ... | ${dut2_vif2_mac} -| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} -| | | ... | ${number} -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} -| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 -| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} -| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 -| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 -| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 -| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} -| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 -| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 -| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${fib_table_1}= | Evaluate | ${100}+${number} +| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} +| | | ${ip_base_vif1}= | Evaluate | ${ip_base_start}+(${number}-1)*2 +| | | ${ip_base_vif2}= | Evaluate | ${ip_base_vif1}+1 +| | | ${ip_net_vif1}= | Set Variable +| | | ... | ${ip_base_vif1}.${ip_base_vif1}.${ip_base_vif1} +| | | ${ip_net_vif2}= | Set Variable +| | | ... | ${ip_base_vif2}.${ip_base_vif2}.${ip_base_vif2} +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up +| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up +| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} +| | | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up +| | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up +| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} +| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} +| | | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut1_vif1_idx} multipath +| | | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut1_vif2_idx} multipath +| | | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} +| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut2_vif1_idx} multipath +| | | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} +| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut2_vif2_idx} multipath +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${fib_table_1} +| | | Assign Interface To Fib Table | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${fib_table_2} +| | | Configure IP addresses on interfaces +| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif1_idx} +| | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} +| | | ... | ${dut1_vif2_idx} +| | | ${dut2_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif1_idx} +| | | ${dut2_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut2} +| | | ... | ${dut2_vif2_idx} +| | | Set Test Variable | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1_vif1_mac} +| | | Set Test Variable | ${dut1-vhost-${number}-if2_mac} +| | | ... | ${dut1_vif2_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2_vif1_mac} +| | | Set Test Variable | ${dut2-vhost-${number}-if2_mac} +| | | ... | ${dut2_vif2_mac} +| | | ${qemu_id}= | Set Variable If | ${number} < 10 | 0${number} +| | | ... | ${number} +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut1} | ${dut1-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if1} +| | | ... | ${ip_net_vif1}.2 | 52:54:00:00:${qemu_id}:01 +| | | Add arp on dut | ${dut2} | ${dut2-vhost-${number}-if2} +| | | ... | ${ip_net_vif2}.2 | 52:54:00:00:${qemu_id}:02 +| | | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut1-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut1-vhost-${number}-if2} | vrf=${fib_table_2} +| | | Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | ${ip_net_vif1}.2 +| | | ... | ${dut2-vhost-${number}-if1} | vrf=${fib_table_1} +| | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | ${ip_net_vif2}.2 +| | | ... | ${dut2-vhost-${number}-if2} | vrf=${fib_table_2} | Initialize IPv4 policer 2r3c-${t} in 3-node circular topology | | [Documentation] @@ -842,27 +651,27 @@ | | ... | circular topology \| | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${prev_index}= | Evaluate | ${number}-1 -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 -| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} -| | | ... | ${dut1-vhost-${prev_index}-if2} -| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 -| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} -| | | ... | ${dut2-vhost-${prev_index}-if2} -| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} -| | | ... | ${dut2-vhost-${number}-if1} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${dut1_if2} -| | | Run Keyword If | ${number}==${nr} | Configure L2XC -| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${dut2_if2} +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${prev_index}= | Evaluate | ${number}-1 +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} +| | | ... | ${dut1-vhost-${prev_index}-if2} +| | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} +| | | ... | ${dut2-vhost-${prev_index}-if2} +| | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} +| | | ... | ${dut2-vhost-${number}-if1} +| | | Run Keyword If | ${number}==${nr} | Configure L2XC +| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${dut1_if2} +| | | Run Keyword If | ${number}==${nr} | Configure L2XC +| | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${dut2_if2} | Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology | | [Documentation] @@ -968,23 +777,23 @@ | | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${1} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 -| | | ... | dut1-vhost-${number}-if2 -| | | ${bd_id2}= | Evaluate | ${number}+1 -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} | ${bd_id2} -| | | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 -| | | ... | dut2-vhost-${number}-if2 -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} | ${number} -| | | Add interface to bridge domain | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} | ${bd_id2} +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | Configure vhost interfaces for L2BD forwarding | ${dut1} +| | | ... | ${sock1} | ${sock2} | dut1-vhost-${number}-if1 +| | | ... | dut1-vhost-${number}-if2 +| | | ${bd_id2}= | Evaluate | ${number}+1 +| | | Add interface to bridge domain | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} | ${bd_id2} +| | | Configure vhost interfaces for L2BD forwarding | ${dut2} +| | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 +| | | ... | dut2-vhost-${number}-if2 +| | | Add interface to bridge domain | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} | ${number} +| | | Add interface to bridge domain | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} | ${bd_id2} | Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology | | [Documentation] @@ -995,8 +804,10 @@ | | ... | interfaces. | | ... | | Set interfaces in path in 3-node circular topology up -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 +| | ... | 24 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 +| | ... | 24 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | Add arp on dut | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} @@ -1033,8 +844,10 @@ | | [Arguments] | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | | ... | | Set interfaces in path in 3-node circular topology up -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 -| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} | 172.16.0.1 +| | ... | 24 +| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1} | 172.16.0.2 +| | ... | 24 | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 | | ... | 172.16.0.1 | 172.16.0.2 | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 @@ -1124,556 +937,10 @@ | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} | | All Vpp Interfaces Ready Wait | ${nodes} -| Set up 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} -| | ... -| | Show vpp version on all DUTs -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_model} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} - -| Set up 2-node-switched performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string -| | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \ -| | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac} -| | ... | ${tg_if2_dest_mac} -| | ... -| | Show vpp version on all DUTs -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_model} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} -| | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac} - -| Set up 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Suite preparation phase that setup default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} -| | ... -| | Show vpp version on all DUTs -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_model} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} - -| Tear down 3-node performance topology -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown. -| | ... -| | Teardown traffic generator | ${tg} - -| Tear down 2-node performance topology -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown. -| | ... -| | Teardown traffic generator | ${tg} - -| Find NDR using linear search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 linear search with non drop rate. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - start_rate - Initial start rate [pps]. Type: float -| | ... | - step_rate - Step of linear search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| -| | ... -| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Linear Step | ${step_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Linear Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%NDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) -| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 50%NDR | ${lat_50p} -| | Append To List | ${latency} | ${tmp} -| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) -| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 10%NDR | ${lat_10p} -| | Append To List | ${latency} | ${tmp} -| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} -| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} - -| Find PDR using linear search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 linear search with partial drop rate -| | ... | with PDR threshold and type specified by parameter. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - start_rate - Initial start rate [pps]. Type: float -| | ... | - step_rate - Step of linear search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... | - loss_acceptance - Accepted loss during search. Type: float -| | ... | - loss_acceptance_type - Percentage or frames. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find PDR using linear search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage \| -| | ... -| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Linear Step | ${step_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Set Loss Acceptance | ${loss_acceptance} -| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage -| | Linear Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%PDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} -| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} -| | ... | ${loss_acceptance_type} | fail_on_loss=${False} - -| Find NDR using binary search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 binary search with non drop rate. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - binary_min - Lower boundary of search [pps]. Type: float -| | ... | - binary_max - Upper boundary of search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... | - threshold - Threshold to stop search [pps]. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find NDR using binary search and pps \| 64 \| 6000000 \ -| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| -| | ... -| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Set Binary Convergence Threshold | ${threshold} -| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%NDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) -| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 50%NDR | ${lat_50p} -| | Append To List | ${latency} | ${tmp} -| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) -| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 10%NDR | ${lat_10p} -| | Append To List | ${latency} | ${tmp} -| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} -| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} - -| Find PDR using binary search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 binary search with partial drop rate -| | ... | with PDR threshold and type specified by parameter. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - binary_min - Lower boundary of search [pps]. Type: float -| | ... | - binary_max - Upper boundary of search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... | - threshold - Threshold to stop search [pps]. Type: integer -| | ... | - loss_acceptance - Accepted loss during search. Type: float -| | ... | - loss_acceptance_type - Percentage or frames. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find PDR using binary search and pps \| 64 \| 6000000 \ -| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| 0.5 \ -| | ... | \| percentage \| -| | ... -| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Set Loss Acceptance | ${loss_acceptance} -| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage -| | Set Binary Convergence Threshold | ${threshold} -| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%PDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} -| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} -| | ... | ${loss_acceptance_type} | fail_on_loss=${False} - -| Find NDR using combined search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 combined search (linear+binary) with -| | ... | non drop rate. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - start_rate - Initial start rate [pps]. Type: float -| | ... | - step_rate - Step of linear search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... | - threshold - Threshold to stop search [pps]. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find NDR using combined search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| -| | ... -| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Linear Step | ${step_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Set Binary Convergence Threshold | ${threshold} -| | Combined Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%NDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) -| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 50%NDR | ${lat_50p} -| | Append To List | ${latency} | ${tmp} -| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) -| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} -| | ... | ${framesize} | ${topology_type} -| | ${tmp}= | Create List | 10%NDR | ${lat_10p} -| | Append To List | ${latency} | ${tmp} -| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${latency} -| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} -| | ... | fail_on_loss=${False} - -| Find PDR using combined search and pps -| | [Documentation] -| | ... | Find throughput by using RFC2544 combined search (linear+binary) with -| | ... | partial drop rate with PDR threshold and type specified by parameter. -| | ... -| | ... | *Arguments:* -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - start_rate - Initial start rate [pps]. Type: float -| | ... | - step_rate - Step of linear search [pps]. Type: float -| | ... | - topology_type - Topology type. Type: string -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - max_rate - Upper limit of search [pps]. Type: float -| | ... | - threshold - Threshold to stop search [pps]. Type: integer -| | ... | - loss_acceptance - Accepted loss during search. Type: float -| | ... | - loss_acceptance_type - Percentage or frames. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Find PDR using combined search and pps \| 64 \| 5000000 \ -| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| 0.5 \ -| | ... | \| percentage \| -| | ... -| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} -| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' -| | ... -| | ${duration}= | Set Variable | ${perf_trial_duration} -| | Set Duration | ${duration} -| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} -| | Set Search Linear Step | ${step_rate} -| | Set Search Frame Size | ${framesize} -| | Set Search Rate Type pps -| | Set Loss Acceptance | ${loss_acceptance} -| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' -| | ... | Set Loss Acceptance Type Percentage -| | Set Binary Convergence Threshold | ${threshold} -| | Combined Search | ${start_rate} | ${topology_type} -| | ${rate_per_stream} | ${lat}= | Verify Search Result -| | ${tmp}= | Create List | 100%PDR | ${lat} -| | ${latency}= | Create List | ${tmp} -| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 -| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} -| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps -| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} -| | ... | ${loss_acceptance_type} | fail_on_loss=${False} - -| Display result of NDR search -| | [Documentation] -| | ... | Display result of NDR search in packet per seconds (total and per -| | ... | stream) and Gbps total bandwidth with untagged packet. -| | ... | Througput is calculated as: -| | ... | Measured rate per stream * Total number of streams -| | ... | Bandwidth is calculated as: -| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC -| | ... -| | ... | *Arguments:* -| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - nr_streams - Total number of streams. Type: integer -| | ... | - latency - Latency stats. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \ -| | ... | \| [100%NDR, [10/10/10, 1/2/3]] \| -| | ... -| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} | ${latency} -| | ... -| | ${framesize}= | Get Frame Size | ${framesize} -| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} -| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) -| | Set Test Message | FINAL_RATE: ${rate_total} pps -| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes -| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) -| | ... | append=yes -| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes -| | :FOR | ${lat} | IN | @{latency} -| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes - -| Display result of PDR search -| | [Documentation] -| | ... | Display result of PDR search in packet per seconds (total and per -| | ... | stream) and Gbps total bandwidth with untagged packet. -| | ... | Througput is calculated as: -| | ... | Measured rate per stream * Total number of streams -| | ... | Bandwidth is calculated as: -| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC -| | ... -| | ... | *Arguments:* -| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - nr_streams - Total number of streams. Type: integer -| | ... | - loss_acceptance - Accepted loss during search. Type: float -| | ... | - loss_acceptance_type - Percentage or frames. Type: string -| | ... | - latency - Latency stats. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \ -| | ... | \| percentage \| [100%NDR, [10/10/10, 1/2/3]] \| -| | ... -| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} -| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} -| | ... -| | ${framesize}= | Get Frame Size | ${framesize} -| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} -| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) -| | Set Test Message | FINAL_RATE: ${rate_total} pps -| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes -| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) -| | ... | append=yes -| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes -| | :FOR | ${lat} | IN | @{latency} -| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes -| | Set Test Message -| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type} -| | ... | append=yes - -| Measure latency pps -| | [Documentation] -| | ... | Send traffic at specified rate. Measure min/avg/max latency -| | ... -| | ... | *Arguments:* -| | ... | - duration - Duration of traffic run [s]. Type: integer -| | ... | - rate - Rate for sending packets. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4 \| -| | ... -| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... -| | Return From Keyword If | ${rate} <= 10000 | ${-1} -| | ${ret}= | Is DPDK performance test -| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs -| | Send traffic on tg | ${duration} | ${rate}pps | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs -| | Run keyword and return | Get latency - -| Traffic should pass with no loss -| | [Documentation] -| | ... | Send traffic at specified rate. No packet loss is accepted at loss -| | ... | evaluation. -| | ... -| | ... | *Arguments:* -| | ... | - duration - Duration of traffic run [s]. Type: integer -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... | - fail_on_loss - If True, the keyword fails if loss occurred. -| | ... | Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| -| | ... -| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... | ${fail_on_loss}=${True} -| | ... -| | Clear and show runtime counters with running traffic | ${duration} -| | ... | ${rate} | ${framesize} | ${topology_type} -| | ${ret}= | Is DPDK performance test -| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs -| | Send traffic on tg | ${duration} | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs -| | Run Keyword If | ${fail_on_loss} | No traffic loss occurred - -| Traffic should pass with partial loss -| | [Documentation] -| | ... | Send traffic at specified rate. Partial packet loss is accepted -| | ... | within loss acceptance value specified as argument. -| | ... -| | ... | *Arguments:* -| | ... | - duration - Duration of traffic run [s]. Type: integer -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... | - loss_acceptance - Accepted loss during search. Type: float -| | ... | - loss_acceptance_type - Percentage or frames. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| -| | ... -| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... | ${loss_acceptance} | ${loss_acceptance_type} -| | ... | ${fail_on_loss}=${True} -| | ... -| | Clear and show runtime counters with running traffic | ${duration} -| | ... | ${rate} | ${framesize} | ${topology_type} -| | ${ret}= | Is DPDK performance test -| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs -| | Send traffic on tg | ${duration} | ${rate} | ${framesize} -| | ... | ${topology_type} | warmup_time=0 -| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs -| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted -| | ... | ${loss_acceptance} | ${loss_acceptance_type} - -| Clear and show runtime counters with running traffic +| Add PCI devices to DUTs in 3-node single link topology | | [Documentation] -| | ... | Start traffic at specified rate then clear runtime counters on all -| | ... | DUTs. Wait for specified amount of time and capture runtime counters -| | ... | on all DUTs. Finally stop traffic -| | ... -| | ... | *Arguments:* -| | ... | - duration - Duration of traffic run [s]. Type: integer -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| +| | ... | Add PCI devices to VPP configuration file. | | ... -| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} -| | ... -| | Send traffic on tg | -1 | ${rate} | ${framesize} | ${topology_type} -| | ... | warmup_time=0 | async_call=${True} | latency=${False} -| | ${ret}= | Is DPDK performance test -| | Run Keyword If | ${ret}==${FALSE} | Clear runtime counters on all DUTs -| | Sleep | ${duration} -| | Run Keyword If | ${ret}==${FALSE} | Show runtime counters on all DUTs -| | Stop traffic on tg - -| Add PCI devices to DUTs in 3-node single link topology | | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} | | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} | | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} @@ -1682,6 +949,9 @@ | | Run keyword | DUT2.Add DPDK Dev | ${dut2_if1_pci} | ${dut2_if2_pci} | Add PCI devices to DUTs in 2-node single link topology +| | [Documentation] +| | ... | Add PCI devices to VPP configuration file. +| | ... | | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} | | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} | | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} @@ -1762,17 +1032,17 @@ | | ... | in a 3-node circular topology \| | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} -| | | ${vm1}= | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} -| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} -| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} -| | | ${vm2}= | Configure guest VM with dpdk-testpmd connected via vhost-user -| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} -| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} -| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} +| | | ${vm1}= | Configure guest VM with dpdk-testpmd connected via vhost-user +| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} +| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} +| | | ${vm2}= | Configure guest VM with dpdk-testpmd connected via vhost-user +| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} +| | | ... | skip=${skip_cpus} | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} | Configure guest VM with dpdk-testpmd using SMT connected via vhost-user | | [Documentation] @@ -1902,21 +1172,23 @@ | | ... | setup in a 3-node circular topology \| | | ... | | :FOR | ${number} | IN RANGE | 1 | ${nr}+1 -| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 -| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} -| | | ${vm1}= | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} -| | | ... | ${dut1-vhost-${number}-if1_mac} -| | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} -| | | ... | count=${vm_cpus} | qemu_id=${number} -| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} -| | | ${vm2}= | Configure guest VM with dpdk-testpmd-mac connected via vhost-user -| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} -| | | ... | ${dut2-vhost-${number}-if1_mac} -| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} -| | | ... | count=${vm_cpus} | qemu_id=${number} -| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} +| | | ${sock1}= | Set Variable | /tmp/sock-${number}-1 +| | | ${sock2}= | Set Variable | /tmp/sock-${number}-2 +| | | ${skip_cpus}= | Evaluate | ${vpp_cpus}+${system_cpus} +| | | ${vm1}= +| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user +| | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM${number} +| | | ... | ${dut1-vhost-${number}-if1_mac} +| | | ... | ${dut1-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM${number} | ${vm1} +| | | ${vm2}= +| | | ... | Configure guest VM with dpdk-testpmd-mac connected via vhost-user +| | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM${number} +| | | ... | ${dut2-vhost-${number}-if1_mac} +| | | ... | ${dut2-vhost-${number}-if2_mac} | skip=${skip_cpus} +| | | ... | count=${vm_cpus} | qemu_id=${number} +| | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM${number} | ${vm2} | Configure guest VM with dpdk-testpmd-mac using SMT connected via vhost-user | | [Documentation] @@ -1939,7 +1211,7 @@ | | ... | *Example:* | | ... | | ... | \| Configure guest VM with dpdk-testpmd-mac using SMT connected via \ -| | ... | vhost-user \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM \ +| | ... | vhost-user \| ${nodes['DUT1']} \| /tmp/sock1 \| /tmp/sock2 \| DUT1_VM\ | | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| ${6} \| ${5} \| | | ... | | [Arguments] | ${dut_node} | ${sock1} | ${sock2} | ${vm_name} @@ -2061,56 +1333,6 @@ | | Set Interface State | ${vm} | ${br} | up | if_type=name | | Return From Keyword | ${vm} -| Tear down guest VM with dpdk-testpmd -| | [Documentation] -| | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}. -| | ... | Argument is dictionary of all qemu nodes running with its names. -| | ... | Dpdk-testpmd is stopped gracefully with printing stats. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node where to clean qemu. Type: dictionary -| | ... | - dut_vm_refs - VM references on node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear down guest VM with dpdk-testpmd \| ${node['DUT1']} \ -| | ... | \| ${dut_vm_refs} \| -| | ... -| | [Arguments] | ${dut_node} | ${dut_vm_refs} -| | ${vms_number}= | Get Length | ${dut_vm_refs} -| | ${index}= | Set Variable | ${0} -| | :FOR | ${vm_name} | IN | @{dut_vm_refs} -| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} -| | | ${index}= | Evaluate | ${index} + 1 -| | | Dpdk Testpmd Stop | ${vm} -| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | | Run Keyword | ${vm_name}.Qemu Clear Socks -| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All - -| Tear down guest VM -| | [Documentation] -| | ... | Stop all qemu processes running on ${dut_node}. -| | ... | Argument is dictionary of all qemu nodes running with its names. -| | ... -| | ... | *Arguments:* -| | ... | - dut_node - Node where to clean qemu. Type: dictionary -| | ... | - dut_vm_refs - VM references on node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear down guest VM \| ${node['DUT1']} \ -| | ... | \| ${dut_vm_refs} \| -| | ... -| | [Arguments] | ${dut_node} | ${dut_vm_refs} -| | ${vms_number}= | Get Length | ${dut_vm_refs} -| | ${index}= | Set Variable | ${0} -| | :FOR | ${vm_name} | IN | @{dut_vm_refs} -| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} -| | | ${index}= | Evaluate | ${index} + 1 -| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} -| | | Run Keyword | ${vm_name}.Qemu Clear Socks -| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. @@ -2369,197 +1591,7 @@ | | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | 12.0.0.2 | ${dut2_if2} | | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | 11.0.0.1 | ${dut2_if1} | | ... -| | Configure inside and outside interfaces | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure deterministic mode for SNAT | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 - -| Set up DPDK 2-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and setup global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \ -| | ... | \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} -| | ... -| | Set variables in 2-node circular topology with DUT interface model -| | ... | ${nic_model} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Set up DPDK 3-node performance topology with DUT's NIC model -| | [Documentation] -| | ... | Updates interfaces on all nodes and setup global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. Initializes DPDK test -| | ... | environment. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} -| | ... -| | Set variables in 3-node circular topology with DUT interface model -| | ... | ${nic_model} -| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} -| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} -| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} - -| Tear down DPDK 3-node performance topology -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown. -| | ... | Cleanup DPDK test environment. -| | ... -| | Teardown traffic generator | ${tg} -| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} - -| Tear down DPDK 2-node performance topology -| | [Documentation] -| | ... | Suite teardown phase with traffic generator teardown. -| | ... | Cleanup DPDK test environment. -| | ... -| | Teardown traffic generator | ${tg} -| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Is DPDK performance test -| | [Documentation] -| | ... | Return TRUE if variable DPDK_TEST exist, otherwise FALSE. -| | ${ret} | ${tmp}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${DPDK_TEST} -| | Return From Keyword If | "${ret}" == "PASS" | ${TRUE} -| | Return From Keyword | ${FALSE} - -| Set up performance test -| | [Documentation] | Common test setup for performance tests. -| | ... -| | Reset VAT History On All DUTs | ${nodes} -| | Create base startup configuration of VPP on all DUTs - -| Tear down performance discovery test -| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ -| | ... | tests. -| | ... -| | ... | *Arguments:* -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear down performance discovery test \| 4.0mpps \| 64 \ -| | ... | \| 3-node-IPv4 \| -| | ... -| | [Arguments] | ${rate} | ${framesize} | ${topology_type} -| | ... -| | Show VAT History On All DUTs | ${nodes} -| | Show statistics on all DUTs -| | Run Keyword If Test Failed -| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} - -| Tear down performance ndrchk test -| | [Documentation] | Common test teardown for ndrchk performance tests. -| | ... -| | Show VAT History On All DUTs | ${nodes} -| | Show statistics on all DUTs - -| Performance pdrchk test teardown -| | [Documentation] | Common test teardown for pdrchk performance tests. -| | ... -| | Show VAT History On All DUTs | ${nodes} -| | Show statistics on all DUTs - -| Tear down performance test with vhost and VM with dpdk-testpmd -| | [Documentation] | Common test teardown for performance tests which use -| | ... | vhost(s) and VM(s) with dpdk-testpmd. -| | ... -| | ... | *Arguments:* -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... | - dut1_node - Node where to clean qemu. Type: dictionary -| | ... | - dut1_vm_refs - VM references on node. Type: dictionary -| | ... | - dut2_node - Node where to clean qemu. Type: dictionary -| | ... | - dut2_vm_refs - VM references on node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \ -| | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \ -| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \| -| | ... -| | [Arguments] | ${rate} | ${framesize} | ${topology_type} -| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} -| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} -| | ... -| | Show VAT History On All DUTs | ${nodes} -| | Show VPP vhost on all DUTs -| | Show statistics on all DUTs -| | Run Keyword If Test Failed -| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} -| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} -| | Run keyword unless | ${dut1_node}==${None} -| | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs} -| | Run keyword unless | ${dut2_node}==${None} -| | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} - -| Set up IPSec performance test suite -| | [Documentation] -| | ... | Suite preparation phase that sets default startup configuration of -| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global -| | ... | variables used in test cases based on interface model provided as an -| | ... | argument. Initializes traffic generator. -| | ... | Then it configures crypto device and kernel module on all DUTs. -| | ... -| | ... | *Arguments:* -| | ... | - topology_type - Topology type. Type: string -| | ... | - nic_model - Interface model. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set up IPSec performance test suite \| L2 \ -| | ... | \| Intel-X520-DA2 \| -| | ... -| | [Arguments] | ${topology_type} | ${nic_model} -| | ... -| | Set up 3-node performance topology with DUT's NIC model -| | ... | ${topology_type} | ${nic_model} -| | Configure crypto device on all DUTs | force_init=${True} -| | Configure kernel module on all DUTs | igb_uio | force_load=${True} - -| Tear down performance discovery test with SNAT -| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ -| | ... | tests with SNAT feature used. -| | ... -| | ... | *Arguments:* -| | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - topology_type - Topology type. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear down performance discovery test with SNAT \| 4.0mpps \| 64 \ -| | ... | \| ${traffic_profile} \| -| | ... -| | [Arguments] | ${rate} | ${framesize} | ${traffic_profile} -| | ... -| | Tear down performance discovery test | ${rate}pps | ${framesize} -| | ... | ${traffic_profile} -| | Show SNAT verbose | ${dut1} -| | Show SNAT verbose | ${dut2} +| | Configure inside and outside interfaces +| | ... | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Configure deterministic mode for SNAT +| | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 diff --git a/resources/libraries/robot/performance_setup.robot b/resources/libraries/robot/performance_setup.robot new file mode 100644 index 0000000000..781c4588e4 --- /dev/null +++ b/resources/libraries/robot/performance_setup.robot @@ -0,0 +1,501 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance_configuration.robot +| Resource | resources/libraries/robot/performance_utils.robot +| Documentation | Performance suite keywords - Suite and test setups and +| ... | teardowns. + +*** Keywords *** + +# Keywords used in setups and teardowns + +| Set variables in 2-node circular topology +| | [Documentation] +| | ... | Compute path for testing on two given nodes in circular +| | ... | topology and set corresponding suite variables. +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - tg - TG node +| | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - dut1 - DUT1 node +| | ... | - dut1_if1 - 1st DUT interface towards TG. +| | ... | - dut1_if2 - 2nd DUT interface towards TG. +| | ... +| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_if1} | ${tg}= | First Interface +| | ${dut1_if1} | ${dut1}= | First Ingress Interface +| | ${dut1_if2} | ${dut1}= | Last Egress Interface +| | ${tg_if2} | ${tg}= | Last Interface +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${dut1} +| | Set Suite Variable | ${dut1_if1} +| | Set Suite Variable | ${dut1_if2} + +| Set variables in 3-node circular topology +| | [Documentation] +| | ... | Compute path for testing on three given nodes in circular +| | ... | topology and set corresponding suite variables. +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - tg - TG node +| | ... | - tg_if1 - TG interface towards DUT1. +| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - dut1 - DUT1 node +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2 - DUT2 node +| | ... | - dut2_if1 - DUT2 interface towards DUT1. +| | ... | - dut2_if2 - DUT2 interface towards TG. +| | ... +| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} +| | ... | ${nodes['TG']} +| | Compute Path +| | ${tg_if1} | ${tg}= | Next Interface +| | ${dut1_if1} | ${dut1}= | Next Interface +| | ${dut1_if2} | ${dut1}= | Next Interface +| | ${dut2_if1} | ${dut2}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | ${tg_if2} | ${tg}= | Next Interface +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${dut1} +| | Set Suite Variable | ${dut1_if1} +| | Set Suite Variable | ${dut1_if2} +| | Set Suite Variable | ${dut2} +| | Set Suite Variable | ${dut2_if1} +| | Set Suite Variable | ${dut2_if2} + +| Set variables in 2-node circular topology with DUT interface model +| | [Documentation] +| | ... | Compute path for testing on two given nodes in circular topology +| | ... | based on interface model provided as an argument and set +| | ... | corresponding suite variables. +| | ... +| | ... | *Arguments:* +| | ... | - iface_model - Interface model. Type: string +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - tg - TG node +| | ... | - tg_if1 - 1st TG interface towards DUT. +| | ... | - tg_if2 - 2nd TG interface towards DUT. +| | ... | - dut1 - DUT1 node +| | ... | - dut1_if1 - 1st DUT interface towards TG. +| | ... | - dut1_if2 - 2nd DUT interface towards TG. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set variables in 2-node circular topology with DUT interface model\ +| | ... | \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${iface_model} +| | ... +| | ${iface_model_list}= | Create list | ${iface_model} +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path | always_same_link=${FALSE} +| | ${tg_if1} | ${tg}= | First Interface +| | ${dut1_if1} | ${dut1}= | First Ingress Interface +| | ${dut1_if2} | ${dut1}= | Last Egress Interface +| | ${tg_if2} | ${tg}= | Last Interface +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${dut1} +| | Set Suite Variable | ${dut1_if1} +| | Set Suite Variable | ${dut1_if2} + +| Set variables in 3-node circular topology with DUT interface model +| | [Documentation] +| | ... | Compute path for testing on three given nodes in circular topology +| | ... | based on interface model provided as an argument and set +| | ... | corresponding suite variables. +| | ... +| | ... | *Arguments:* +| | ... | - iface_model - Interface model. Type: string +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - tg - TG node +| | ... | - tg_if1 - TG interface towards DUT1. +| | ... | - tg_if2 - TG interface towards DUT2. +| | ... | - dut1 - DUT1 node +| | ... | - dut1_if1 - DUT1 interface towards TG. +| | ... | - dut1_if2 - DUT1 interface towards DUT2. +| | ... | - dut2 - DUT2 node +| | ... | - dut2_if1 - DUT2 interface towards TG. +| | ... | - dut2_if2 - DUT2 interface towards DUT1. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set variables in 3-node circular topology with DUT interface model\ +| | ... | \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${iface_model} +| | ... +| | ${iface_model_list}= | Create list | ${iface_model} +| | Append Node | ${nodes['TG']} +| | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['DUT2']} | filter_list=${iface_model_list} +| | Append Node | ${nodes['TG']} +| | Compute Path +| | ${tg_if1} | ${tg}= | Next Interface +| | ${dut1_if1} | ${dut1}= | Next Interface +| | ${dut1_if2} | ${dut1}= | Next Interface +| | ${dut2_if1} | ${dut2}= | Next Interface +| | ${dut2_if2} | ${dut2}= | Next Interface +| | ${tg_if2} | ${tg}= | Next Interface +| | Set Suite Variable | ${tg} +| | Set Suite Variable | ${tg_if1} +| | Set Suite Variable | ${tg_if2} +| | Set Suite Variable | ${dut1} +| | Set Suite Variable | ${dut1_if1} +| | Set Suite Variable | ${dut1_if2} +| | Set Suite Variable | ${dut2} +| | Set Suite Variable | ${dut2_if1} +| | Set Suite Variable | ${dut2_if2} + +| Tear down guest VM with dpdk-testpmd +| | [Documentation] +| | ... | Stop all qemu processes with dpdk-testpmd running on ${dut_node}. +| | ... | Argument is dictionary of all qemu nodes running with its names. +| | ... | Dpdk-testpmd is stopped gracefully with printing stats. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - Node where to clean qemu. Type: dictionary +| | ... | - dut_vm_refs - VM references on node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down guest VM with dpdk-testpmd \| ${node['DUT1']} \ +| | ... | \| ${dut_vm_refs} \| +| | ... +| | [Arguments] | ${dut_node} | ${dut_vm_refs} +| | ${vms_number}= | Get Length | ${dut_vm_refs} +| | ${index}= | Set Variable | ${0} +| | :FOR | ${vm_name} | IN | @{dut_vm_refs} +| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} +| | | ${index}= | Evaluate | ${index} + 1 +| | | Dpdk Testpmd Stop | ${vm} +| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} +| | | Run Keyword | ${vm_name}.Qemu Clear Socks +| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All + +| Tear down guest VM +| | [Documentation] +| | ... | Stop all qemu processes running on ${dut_node}. +| | ... | Argument is dictionary of all qemu nodes running with its names. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - Node where to clean qemu. Type: dictionary +| | ... | - dut_vm_refs - VM references on node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down guest VM \| ${node['DUT1']} \ +| | ... | \| ${dut_vm_refs} \| +| | ... +| | [Arguments] | ${dut_node} | ${dut_vm_refs} +| | ${vms_number}= | Get Length | ${dut_vm_refs} +| | ${index}= | Set Variable | ${0} +| | :FOR | ${vm_name} | IN | @{dut_vm_refs} +| | | ${vm}= | Get From Dictionary | ${dut_vm_refs} | ${vm_name} +| | | ${index}= | Evaluate | ${index} + 1 +| | | Run Keyword | ${vm_name}.Qemu Set Node | ${dut_node} +| | | Run Keyword | ${vm_name}.Qemu Clear Socks +| | | Run Keyword If | '${index}' == '${vms_number}' | ${vm_name}.Qemu Kill All + +# Suite setups + +| Set up 2-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that setup default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Show vpp version on all DUTs +| | Set variables in 2-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} + +| Set up 2-node-switched performance topology with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that setup default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... | - tg_if1_dest_mac - Interface 1 destination MAC address. Type: string +| | ... | - tg_if2_dest_mac - Interface 2 destination MAC address. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 2-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \ +| | ... | \| 22:22:33:44:55:66 \| 22:22:33:44:55:55 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac} +| | ... | ${tg_if2_dest_mac} +| | ... +| | Show vpp version on all DUTs +| | Set variables in 2-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} +| | ... | ${tg_if1_dest_mac} | ${tg_if2_dest_mac} + +| Set up 3-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Suite preparation phase that setup default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up 3-node performance topology with DUT's NIC model \| L2 \ +| | ... | \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Show vpp version on all DUTs +| | Set variables in 3-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} + +| Set up DPDK 2-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. Initializes DPDK test +| | ... | environment. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up DPDK 2-node performance topology with DUT's NIC model \ +| | ... | \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Set variables in 2-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut1} | ${dut1_if2} | ${topology_type} +| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} + +| Set up DPDK 3-node performance topology with DUT's NIC model +| | [Documentation] +| | ... | Updates interfaces on all nodes and setup global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. Initializes DPDK test +| | ... | environment. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Set variables in 3-node circular topology with DUT interface model +| | ... | ${nic_model} +| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2} +| | ... | ${dut1} | ${dut1_if1} | ${dut2} | ${dut2_if2} | ${topology_type} +| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} + +| Set up IPSec performance test suite +| | [Documentation] +| | ... | Suite preparation phase that sets default startup configuration of +| | ... | VPP on all DUTs. Updates interfaces on all nodes and sets global +| | ... | variables used in test cases based on interface model provided as an +| | ... | argument. Initializes traffic generator. +| | ... | Then it configures crypto device and kernel module on all DUTs. +| | ... +| | ... | *Arguments:* +| | ... | - topology_type - Topology type. Type: string +| | ... | - nic_model - Interface model. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set up IPSec performance test suite \| L2 \ +| | ... | \| Intel-X520-DA2 \| +| | ... +| | [Arguments] | ${topology_type} | ${nic_model} +| | ... +| | Set up 3-node performance topology with DUT's NIC model +| | ... | ${topology_type} | ${nic_model} +| | Configure crypto device on all DUTs | force_init=${True} +| | Configure kernel module on all DUTs | igb_uio | force_load=${True} + +# Suite teardowns + +| Tear down 3-node performance topology +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... +| | Teardown traffic generator | ${tg} + +| Tear down 2-node performance topology +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... +| | Teardown traffic generator | ${tg} + +# Tests setups + +| Set up performance test +| | [Documentation] | Common test setup for performance tests. +| | ... +| | Reset VAT History On All DUTs | ${nodes} +| | Create base startup configuration of VPP on all DUTs + +# Tests teardowns + +| Tear down performance discovery test +| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ +| | ... | tests. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down performance discovery test \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show statistics on all DUTs +| | Run Keyword If Test Failed +| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} + +| Tear down performance ndrchk test +| | [Documentation] | Common test teardown for ndrchk performance tests. +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show statistics on all DUTs + +| Tear down performance pdrchk test +| | [Documentation] | Common test teardown for pdrchk performance tests. +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show statistics on all DUTs + +| Tear down performance test with vhost and VM with dpdk-testpmd +| | [Documentation] | Common test teardown for performance tests which use +| | ... | vhost(s) and VM(s) with dpdk-testpmd. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - dut1_node - Node where to clean qemu. Type: dictionary +| | ... | - dut1_vm_refs - VM references on node. Type: dictionary +| | ... | - dut2_node - Node where to clean qemu. Type: dictionary +| | ... | - dut2_vm_refs - VM references on node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down performance test with vhost and VM with dpdk-testpmd \ +| | ... | \| 4.0mpps \| 64 \| 3-node-IPv4 \| ${node['DUT1']} \| ${dut_vm_refs} \ +| | ... | \| ${node['DUT2']} \| ${dut_vm_refs} \| +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${topology_type} +| | ... | ${dut1_node}=${None} | ${dut1_vm_refs}=${None} +| | ... | ${dut2_node}=${None} | ${dut2_vm_refs}=${None} +| | ... +| | Show VAT History On All DUTs | ${nodes} +| | Show VPP vhost on all DUTs +| | Show statistics on all DUTs +| | Run Keyword If Test Failed +| | ... | Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} +| | Run keyword unless | ${dut1_node}==${None} +| | ... | Tear down guest VM with dpdk-testpmd | ${dut1} | ${dut1_vm_refs} +| | Run keyword unless | ${dut2_node}==${None} +| | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} + +| Tear down DPDK 3-node performance topology +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... | Cleanup DPDK test environment. +| | ... +| | Teardown traffic generator | ${tg} +| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} + +| Tear down DPDK 2-node performance topology +| | [Documentation] +| | ... | Suite teardown phase with traffic generator teardown. +| | ... | Cleanup DPDK test environment. +| | ... +| | Teardown traffic generator | ${tg} +| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} + +| Tear down performance discovery test with SNAT +| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ +| | ... | tests with SNAT feature used. +| | ... +| | ... | *Arguments:* +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down performance discovery test with SNAT \| 4.0mpps \| 64 \ +| | ... | \| ${traffic_profile} \| +| | ... +| | [Arguments] | ${rate} | ${framesize} | ${traffic_profile} +| | ... +| | Tear down performance discovery test | ${rate}pps | ${framesize} +| | ... | ${traffic_profile} +| | Show SNAT verbose | ${dut1} +| | Show SNAT verbose | ${dut2} diff --git a/resources/libraries/robot/performance_utils.robot b/resources/libraries/robot/performance_utils.robot new file mode 100644 index 0000000000..76f88b31dd --- /dev/null +++ b/resources/libraries/robot/performance_utils.robot @@ -0,0 +1,545 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | Collections +| Library | resources.libraries.python.topology.Topology +| Library | resources.libraries.python.NodePath +| Library | resources.libraries.python.DpdkUtil +| Library | resources.libraries.python.InterfaceUtil +| Library | resources.libraries.python.VhostUser +| Library | resources.libraries.python.TrafficGenerator +| Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/counters.robot +| Resource | resources/libraries/robot/bridge_domain.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/qemu.robot +| Resource | resources/libraries/robot/tagging.robot +| Documentation | Performance suite keywords - utilities to find and verify NDR +| ... | and PDR. + +*** Keywords *** +| Calculate pps +| | [Documentation] +| | ... | Calculate pps for given rate and L2 frame size, +| | ... | additional 20B are added to L2 frame size as padding. +| | ... +| | ... | *Arguments* +| | ... | - bps - Rate in bps. Type: integer +| | ... | - framesize - L2 frame size in Bytes. Type: integer +| | ... +| | ... | *Return* +| | ... | - Calculated pps. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Calculate pps \| 10000000000 \| 64 \| +| | ... +| | [Arguments] | ${bps} | ${framesize} +| | ... +| | ${framesize}= | Get Frame Size | ${framesize} +| | ${ret}= | Evaluate | (${bps}/((${framesize}+20)*8)).__trunc__() +| | Return From Keyword | ${ret} + +| Get Frame Size +| | [Documentation] +| | ... | Framesize can be either integer in case of a single packet +| | ... | in stream, or set of packets in case of IMIX type or simmilar. +| | ... | This keyword returns average framesize. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize. Type: integer or string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Get Frame Size \| IMIX_v4_1 \| +| | ... +| | [Arguments] | ${framesize} +| | ... +| | Run Keyword If | '${framesize}' == 'IMIX_v4_1' +| | ... | Return From Keyword | 353.83333 +| | Return From Keyword | ${framesize} + +| Is DPDK performance test +| | [Documentation] +| | ... | Return TRUE if variable DPDK_TEST exist, otherwise FALSE. +| | ${ret} | ${tmp}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${DPDK_TEST} +| | Return From Keyword If | "${ret}" == "PASS" | ${TRUE} +| | Return From Keyword | ${FALSE} + +| Find NDR using linear search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 linear search with non drop rate. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - start_rate - Initial start rate [pps]. Type: float +| | ... | - step_rate - Step of linear search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find NDR using linear search and pps \| 64 \| 5000000 \ +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| +| | ... +| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Linear Step | ${step_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Linear Search | ${start_rate} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%NDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) +| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 50%NDR | ${lat_50p} +| | Append To List | ${latency} | ${tmp} +| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) +| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 10%NDR | ${lat_10p} +| | Append To List | ${latency} | ${tmp} +| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${latency} +| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} + +| Find PDR using linear search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 linear search with partial drop rate +| | ... | with PDR threshold and type specified by parameter. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - start_rate - Initial start rate [pps]. Type: float +| | ... | - step_rate - Step of linear search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... | - loss_acceptance - Accepted loss during search. Type: float +| | ... | - loss_acceptance_type - Percentage or frames. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find PDR using linear search and pps \| 64 \| 5000000 \ +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 0.5 \| percentage \| +| | ... +| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Linear Step | ${step_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Set Loss Acceptance | ${loss_acceptance} +| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' +| | ... | Set Loss Acceptance Type Percentage +| | Linear Search | ${start_rate} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} + +| Find NDR using binary search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 binary search with non drop rate. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - binary_min - Lower boundary of search [pps]. Type: float +| | ... | - binary_max - Upper boundary of search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... | - threshold - Threshold to stop search [pps]. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find NDR using binary search and pps \| 64 \| 6000000 \ +| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| +| | ... +| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Set Binary Convergence Threshold | ${threshold} +| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%NDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) +| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 50%NDR | ${lat_50p} +| | Append To List | ${latency} | ${tmp} +| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) +| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 10%NDR | ${lat_10p} +| | Append To List | ${latency} | ${tmp} +| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${latency} +| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} | fail_on_loss=${False} + +| Find PDR using binary search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 binary search with partial drop rate +| | ... | with PDR threshold and type specified by parameter. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - binary_min - Lower boundary of search [pps]. Type: float +| | ... | - binary_max - Upper boundary of search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... | - threshold - Threshold to stop search [pps]. Type: integer +| | ... | - loss_acceptance - Accepted loss during search. Type: float +| | ... | - loss_acceptance_type - Percentage or frames. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find PDR using binary search and pps \| 64 \| 6000000 \ +| | ... | \| 12000000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 50000 \| 0.5 \ +| | ... | \| percentage \| +| | ... +| | [Arguments] | ${framesize} | ${binary_min} | ${binary_max} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Set Loss Acceptance | ${loss_acceptance} +| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' +| | ... | Set Loss Acceptance Type Percentage +| | Set Binary Convergence Threshold | ${threshold} +| | Binary Search | ${binary_min} | ${binary_max} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} + +| Find NDR using combined search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 combined search (linear+binary) with +| | ... | non drop rate. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - start_rate - Initial start rate [pps]. Type: float +| | ... | - step_rate - Step of linear search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... | - threshold - Threshold to stop search [pps]. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find NDR using combined search and pps \| 64 \| 5000000 \ +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| +| | ... +| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Linear Step | ${step_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Set Binary Convergence Threshold | ${threshold} +| | Combined Search | ${start_rate} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%NDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | ${rate_50p}= | Evaluate | int(${rate_per_stream}*0.5) +| | ${lat_50p}= | Measure latency pps | ${duration} | ${rate_50p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 50%NDR | ${lat_50p} +| | Append To List | ${latency} | ${tmp} +| | ${rate_10p}= | Evaluate | int(${rate_per_stream}*0.1) +| | ${lat_10p}= | Measure latency pps | ${duration} | ${rate_10p} +| | ... | ${framesize} | ${topology_type} +| | ${tmp}= | Create List | 10%NDR | ${lat_10p} +| | Append To List | ${latency} | ${tmp} +| | Display result of NDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${latency} +| | Traffic should pass with no loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} +| | ... | fail_on_loss=${False} + +| Find PDR using combined search and pps +| | [Documentation] +| | ... | Find throughput by using RFC2544 combined search (linear+binary) with +| | ... | partial drop rate with PDR threshold and type specified by parameter. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - start_rate - Initial start rate [pps]. Type: float +| | ... | - step_rate - Step of linear search [pps]. Type: float +| | ... | - topology_type - Topology type. Type: string +| | ... | - min_rate - Lower limit of search [pps]. Type: float +| | ... | - max_rate - Upper limit of search [pps]. Type: float +| | ... | - threshold - Threshold to stop search [pps]. Type: integer +| | ... | - loss_acceptance - Accepted loss during search. Type: float +| | ... | - loss_acceptance_type - Percentage or frames. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Find PDR using combined search and pps \| 64 \| 5000000 \ +| | ... | \| 100000 \| 3-node-IPv4 \| 100000 \| 14880952 \| 5000 \| 0.5 \ +| | ... | \| percentage \| +| | ... +| | [Arguments] | ${framesize} | ${start_rate} | ${step_rate} +| | ... | ${topology_type} | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${loss_acceptance}=0 | ${loss_acceptance_type}='frames' +| | ... +| | ${duration}= | Set Variable | ${perf_trial_duration} +| | Set Duration | ${duration} +| | Set Search Rate Boundaries | ${max_rate} | ${min_rate} +| | Set Search Linear Step | ${step_rate} +| | Set Search Frame Size | ${framesize} +| | Set Search Rate Type pps +| | Set Loss Acceptance | ${loss_acceptance} +| | Run Keyword If | '${loss_acceptance_type}' == 'percentage' +| | ... | Set Loss Acceptance Type Percentage +| | Set Binary Convergence Threshold | ${threshold} +| | Combined Search | ${start_rate} | ${topology_type} +| | ${rate_per_stream} | ${lat}= | Verify Search Result +| | ${tmp}= | Create List | 100%PDR | ${lat} +| | ${latency}= | Create List | ${tmp} +| | Display result of PDR search | ${rate_per_stream} | ${framesize} | 2 +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | Traffic should pass with partial loss | ${duration} | ${rate_per_stream}pps +| | ... | ${framesize} | ${topology_type} | ${loss_acceptance} +| | ... | ${loss_acceptance_type} | fail_on_loss=${False} + +| Display result of NDR search +| | [Documentation] +| | ... | Display result of NDR search in packet per seconds (total and per +| | ... | stream) and Gbps total bandwidth with untagged packet. +| | ... | Througput is calculated as: +| | ... | Measured rate per stream * Total number of streams +| | ... | Bandwidth is calculated as: +| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC +| | ... +| | ... | *Arguments:* +| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - nr_streams - Total number of streams. Type: integer +| | ... | - latency - Latency stats. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Display result of NDR search \| 4400000 \| 64 \| 2 \ +| | ... | \| [100%NDR, [10/10/10, 1/2/3]] \| +| | ... +| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} | ${latency} +| | ... +| | ${framesize}= | Get Frame Size | ${framesize} +| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} +| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) +| | Set Test Message | FINAL_RATE: ${rate_total} pps +| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes +| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) +| | ... | append=yes +| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes +| | :FOR | ${lat} | IN | @{latency} +| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes + +| Display result of PDR search +| | [Documentation] +| | ... | Display result of PDR search in packet per seconds (total and per +| | ... | stream) and Gbps total bandwidth with untagged packet. +| | ... | Througput is calculated as: +| | ... | Measured rate per stream * Total number of streams +| | ... | Bandwidth is calculated as: +| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC +| | ... +| | ... | *Arguments:* +| | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - nr_streams - Total number of streams. Type: integer +| | ... | - loss_acceptance - Accepted loss during search. Type: float +| | ... | - loss_acceptance_type - Percentage or frames. Type: string +| | ... | - latency - Latency stats. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Display result of PDR search \| 4400000 \| 64 \| 2 \| 0.5 \ +| | ... | \| percentage \| [100%NDR, [10/10/10, 1/2/3]] \| +| | ... +| | [Arguments] | ${rate_per_stream} | ${framesize} | ${nr_streams} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} | ${latency} +| | ... +| | ${framesize}= | Get Frame Size | ${framesize} +| | ${rate_total}= | Evaluate | ${rate_per_stream}*${nr_streams} +| | ${bandwidth_total}= | Evaluate | ${rate_total}*(${framesize}+20)*8/(10**9) +| | Set Test Message | FINAL_RATE: ${rate_total} pps +| | Set Test Message | (${nr_streams}x ${rate_per_stream} pps) | append=yes +| | Set Test Message | ${\n}FINAL_BANDWIDTH: ${bandwidth_total} Gbps (untagged) +| | ... | append=yes +| | Set Test Message | ${\n}LATENCY usec [min/avg/max] | append=yes +| | :FOR | ${lat} | IN | @{latency} +| | | Set Test Message | ${\n}LAT_${lat[0]}: ${lat[1]} | append=yes +| | Set Test Message +| | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type} +| | ... | append=yes + +| Measure latency pps +| | [Documentation] +| | ... | Send traffic at specified rate. Measure min/avg/max latency +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: integer +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... +| | Return From Keyword If | ${rate} <= 10000 | ${-1} +| | ${ret}= | Is DPDK performance test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs +| | Send traffic on tg | ${duration} | ${rate}pps | ${framesize} +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs +| | Run keyword and return | Get latency + +| Traffic should pass with no loss +| | [Documentation] +| | ... | Send traffic at specified rate. No packet loss is accepted at loss +| | ... | evaluation. +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - fail_on_loss - If True, the keyword fails if loss occurred. +| | ... | Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... | ${fail_on_loss}=${True} +| | ... +| | Clear and show runtime counters with running traffic | ${duration} +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ${ret}= | Is DPDK performance test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs +| | Send traffic on tg | ${duration} | ${rate} | ${framesize} +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs +| | Run Keyword If | ${fail_on_loss} | No traffic loss occurred + +| Traffic should pass with partial loss +| | [Documentation] +| | ... | Send traffic at specified rate. Partial packet loss is accepted +| | ... | within loss acceptance value specified as argument. +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... | - loss_acceptance - Accepted loss during search. Type: float +| | ... | - loss_acceptance_type - Percentage or frames. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... | ${loss_acceptance} | ${loss_acceptance_type} +| | ... | ${fail_on_loss}=${True} +| | ... +| | Clear and show runtime counters with running traffic | ${duration} +| | ... | ${rate} | ${framesize} | ${topology_type} +| | ${ret}= | Is DPDK performance test +| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs +| | Send traffic on tg | ${duration} | ${rate} | ${framesize} +| | ... | ${topology_type} | warmup_time=0 +| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs +| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted +| | ... | ${loss_acceptance} | ${loss_acceptance_type} + +| Clear and show runtime counters with running traffic +| | [Documentation] +| | ... | Start traffic at specified rate then clear runtime counters on all +| | ... | DUTs. Wait for specified amount of time and capture runtime counters +| | ... | on all DUTs. Finally stop traffic +| | ... +| | ... | *Arguments:* +| | ... | - duration - Duration of traffic run [s]. Type: integer +| | ... | - rate - Rate for sending packets. Type: string +| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - topology_type - Topology type. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Traffic should pass with partial loss \| 10 \| 4.0mpps \| 64 \ +| | ... | \| 3-node-IPv4 \| 0.5 \| percentage \| +| | ... +| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type} +| | ... +| | Send traffic on tg | -1 | ${rate} | ${framesize} | ${topology_type} +| | ... | warmup_time=0 | async_call=${True} | latency=${False} +| | ${ret}= | Is DPDK performance test +| | Run Keyword If | ${ret}==${FALSE} | Clear runtime counters on all DUTs +| | Sleep | ${duration} +| | Run Keyword If | ${ret}==${FALSE} | Show runtime counters on all DUTs +| | Stop traffic on tg |