diff options
Diffstat (limited to 'resources')
| -rw-r--r-- | resources/api/vpp/supported_crcs.yaml | 8 | ||||
| -rw-r--r-- | resources/libraries/python/GeneveUtil.py | 126 | ||||
| -rw-r--r-- | resources/libraries/python/LispSetup.py | 4 | ||||
| -rw-r--r-- | resources/libraries/python/VPPUtil.py | 23 | ||||
| -rw-r--r-- | resources/libraries/python/topology.py | 2 | ||||
| -rw-r--r-- | resources/libraries/robot/ip/geneve.robot | 74 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/test_teardown.robot | 136 | ||||
| -rw-r--r-- | resources/libraries/robot/shared/traffic.robot | 91 |
8 files changed, 374 insertions, 90 deletions
diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml index 2d25a42dfa..7b5a718c29 100644 --- a/resources/api/vpp/supported_crcs.yaml +++ b/resources/api/vpp/supported_crcs.yaml @@ -43,6 +43,8 @@ # 6x^ tc01-64B-1c-ethip4udp-ip4base-iacl1sf-10kflows-mrr # tc01-64B-1c-ethip4udp-ip4base-iacl1sl-10kflows-mrr # ^^ ip4fwdANDiaclANDacl10AND100_flows + add_node_next: '0x2457116d' # dev + add_node_next_reply: '0x2ed75f32' # dev avf_create: '0xdaab8ae2' # dev avf_create_reply: '0x5383d31f' # dev bond_create: '0x48883c7e' # perf @@ -90,6 +92,10 @@ det44_session_dump: '0xe45a3af7' # perf teardown # TODO: Which test to run to verify det44_* messages? # dhcp_proxy_dump / details # honeycomb + geneve_add_del_tunnel2: '0x8c2a9999' # dev + geneve_add_del_tunnel2_reply: '0x5383d31f' # dev + geneve_tunnel_details: '0xe27e2748' # dev + geneve_tunnel_dump: '0xf9e6675e' # dev gpe_enable_disable: '0xc264d7bf' # dev gpe_enable_disable_reply: '0xe8d4e804' # dev # gre_tunnel_add_del / reply # unused L1 keyword: create_gre_tunnel_interface @@ -249,6 +255,8 @@ # ^ dot1qANDl2bdmaclrnANDbaseANDmemif sw_interface_set_flags: '0x6a2b491a' # dev sw_interface_set_flags_reply: '0xe8d4e804' # dev + sw_interface_set_geneve_bypass: '0x65247409' # dev + sw_interface_set_geneve_bypass_reply: '0xe8d4e804' # dev sw_interface_set_l2_bridge: '0x2e483cd0' # dev sw_interface_set_l2_bridge_reply: '0xe8d4e804' # dev sw_interface_set_l2_xconnect: '0x1aaa2dbb' # dev diff --git a/resources/libraries/python/GeneveUtil.py b/resources/libraries/python/GeneveUtil.py new file mode 100644 index 0000000000..3c8ebeebb3 --- /dev/null +++ b/resources/libraries/python/GeneveUtil.py @@ -0,0 +1,126 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""VPP GENEVE Plugin utilities library.""" + +from ipaddress import ip_address + +from resources.libraries.python.Constants import Constants +from resources.libraries.python.InterfaceUtil import InterfaceUtil +from resources.libraries.python.IPAddress import IPAddress +from resources.libraries.python.PapiExecutor import PapiSocketExecutor +from resources.libraries.python.topology import Topology + + +class GeneveUtil: + """VPP GENEVE Plugin Keywords.""" + + @staticmethod + def add_geneve_tunnel( + node, local_address, remote_address, vni, multicast_if=None, + encap_vrf=0, l3_mode=False, next_index=None): + """Add GENEVE tunnel on the specified VPP node. + + :param node: Topology node. + :param local_address: Local IP address. + :param remote_address: Remote IP address. + :param vni: Virtual network ID. + :param multicast_if: Interface key of multicast interface; used only if + remote is multicast. (Default value = None) + :param encap_vrf: The FIB ID for sending unicast GENEVE encap packets or + receiving multicast packets. (Default value = 0) + :param l3_mode: Use geneve tunnel in L3 mode (ip routing) if Tue else in + L2 mode (L2 switching). (Default value = False) + :param next_index: The index of the next node. + :type node: dict + :type local_address: str + :type remote_address: str + :type vni: int + :type multicast_if: str + :type encap_vrf: int + :type l3_mode: bool + :type next_index: int + :returns: SW interface index of created geneve tunnel. + :rtype: int + """ + cmd = u"geneve_add_del_tunnel2" + args = dict( + is_add=True, + local_address=IPAddress.create_ip_address_object( + ip_address(local_address) + ), + remote_address=IPAddress.create_ip_address_object( + ip_address(remote_address) + ), + mcast_sw_if_index=Topology.get_interface_sw_index( + node, multicast_if + ) if multicast_if else Constants.BITWISE_NON_ZERO, + encap_vrf_id=int(encap_vrf), + decap_next_index=next_index if l3_mode + else Constants.BITWISE_NON_ZERO, + vni=int(vni), + l3_mode=l3_mode + ) + err_msg = f"Failed to configure GENEVE tunnel on host {node[u'host']}!" + with PapiSocketExecutor(node) as papi_exec: + sw_if_index = papi_exec.add(cmd, **args).get_sw_if_index(err_msg) + + if_key = Topology.add_new_port(node, u"geneve_tunnel") + Topology.update_interface_sw_if_index(node, if_key, sw_if_index) + + ifc_name = InterfaceUtil.vpp_get_interface_name(node, sw_if_index) + Topology.update_interface_name(node, if_key, ifc_name) + + ifc_mac = InterfaceUtil.vpp_get_interface_mac(node, sw_if_index) + Topology.update_interface_mac_address(node, if_key, ifc_mac) + + return sw_if_index + + @staticmethod + def enable_interface_geneve_bypass(node, interface, is_ipv6=False): + """Add ipv4/ipv6-geneve-bypass graph node for a given interface on + the specified VPP node. + + :param node: Topology node. + :param interface: Interface key from topology file of interface + to add geneve bypass node for. + :param is_ipv6: Enable ipv6-geneve-bypass graph node if True else enable + ipv4-geneve-bypass graph node. + :type node: dict + :type interface: str + :type is_ipv6: bool + """ + cmd = u"sw_interface_set_geneve_bypass" + args = dict( + is_ipv6=is_ipv6, + enable=True, + sw_if_index=Topology.get_interface_sw_index(node, interface) + ) + err_msg = ( + f"Failed to enable {u'ipv6' if is_ipv6 else u'ipv4'}-geneve-bypass " + f"on interface {interface} on host {node[u'host']}!" + ) + with PapiSocketExecutor(node) as papi_exec: + papi_exec.add(cmd, **args).get_reply(err_msg) + + @staticmethod + def show_geneve_tunnel_data(node): + """Show the GENEVE tunnels data. + + :param node: DUT node. + :type node: dict + """ + cmds = [ + u"geneve_tunnel_dump", + ] + PapiSocketExecutor.dump_and_log(node, cmds) diff --git a/resources/libraries/python/LispSetup.py b/resources/libraries/python/LispSetup.py index 59cb1a808d..6579764596 100644 --- a/resources/libraries/python/LispSetup.py +++ b/resources/libraries/python/LispSetup.py @@ -40,8 +40,8 @@ class LispEid: :type eid: str :type prefix_len: int """ - eid_addr = dict(prefix=IPUtil.create_prefix_object( - ip_address(eid), prefix_len) + eid_addr = dict( + prefix=IPUtil.create_prefix_object(ip_address(eid), prefix_len) ) if prefix_len else dict(mac=str(eid)) return dict( diff --git a/resources/libraries/python/VPPUtil.py b/resources/libraries/python/VPPUtil.py index c735494282..a7ec44c974 100644 --- a/resources/libraries/python/VPPUtil.py +++ b/resources/libraries/python/VPPUtil.py @@ -361,3 +361,26 @@ class VPPUtil: logger.trace(f"show threads:\n{threads_data}") return threads_data + + @staticmethod + def vpp_add_graph_node_next(node, graph_node_name, graph_next_name): + """Set the next node for a given node. + + :param node: Node to run command on. + :param graph_node_name: Graph node to add the next node on. + :param graph_next_name: Graph node to add as the next node. + :type node: dict + :type graph_node_name: str + :type graph_next_name: str + :returns: The index of the next node. + :rtype: int + """ + cmd = u"add_node_next" + args = dict( + node_name=graph_node_name, + next_name=graph_next_name + ) + with PapiSocketExecutor(node) as papi_exec: + reply = papi_exec.add(cmd, **args).get_reply() + + return reply[u"next_index"] diff --git a/resources/libraries/python/topology.py b/resources/libraries/python/topology.py index 338ccb6b57..2b930c08dc 100644 --- a/resources/libraries/python/topology.py +++ b/resources/libraries/python/topology.py @@ -174,7 +174,7 @@ class Topology: port_types = ( u"subinterface", u"vlan_subif", u"memif", u"tap", u"vhost", u"loopback", u"gre_tunnel", u"vxlan_tunnel", u"eth_bond", - u"eth_avf", u"eth_rdma" + u"eth_avf", u"eth_rdma", u"geneve_tunnel" ) for node_data in nodes.values(): diff --git a/resources/libraries/robot/ip/geneve.robot b/resources/libraries/robot/ip/geneve.robot new file mode 100644 index 0000000000..c9de91d708 --- /dev/null +++ b/resources/libraries/robot/ip/geneve.robot @@ -0,0 +1,74 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.GeneveUtil +| +| Documentation | Keywords for GENEVE tunnels in VPP. + +*** Keywords *** +| Initialize GENEVE L3 mode in circular topology +| | [Documentation] | Initialization of GENEVE L3 mode on DUT1. +| | +| | [Arguments] | ${with_bypass}=${False} +| | +| | Set interfaces in path up +| | +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | 24 +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0] +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | 24 +| | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] +| | ${next_index}= | VPP Add Graph Node Next +| | ... | ${dut1} | geneve4-input | ethernet-input +| | +| | ${src_ip_int} = | IP To Int | ${gen_tunnel.src_ip} +| | ${dst_ip_int} = | IP To Int | ${gen_tunnel.dst_ip} +| | ${if_ip_int} = | IP To Int | ${gen_tunnel.if_ip} +| | +| | FOR | ${nr} | IN RANGE | 0 | ${n_tunnels} +| | | ${src_ip} = | Int To IP | ${${src_ip_int} + ${nr} * 256} +| | | ${dst_ip} = | Int To IP | ${${dst_ip_int} + ${nr} * 256} +| | | ${if_ip} = | Int To IP | ${${if_ip_int} + ${nr} * 256} +| | | Vpp Route Add +| | | ... | ${dut1} | ${src_ip} | ${gen_tunnel.ip_mask} +| | | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0] +| | | ${tunnel_sw_index}= | Add Geneve Tunnel +| | | ... | ${dut1} | ${gen_tunnel.local} | ${gen_tunnel.remote} +| | | ... | ${${gen_tunnel.vni} + ${nr}} | l3_mode=${True} +| | | ... | next_index=${next_index} +| | | ${tunnel_if_key}= | Get Interface By SW Index +| | | ... | ${dut1} | ${tunnel_sw_index} +| | | ${tunnel_if_mac}= | Get Interface MAC +| | | ... | ${dut1} | ${tunnel_if_key} +| | | VPP Interface Set IP Address +| | | ... | ${dut1} | ${tunnel_if_key} | ${if_ip} | 24 +| | | VPP Add IP Neighbor +| | | ... | ${dut1} | ${tunnel_if_key} | ${dut1_if2_ip4} | ${DUT1_vf2_mac}[0] +| | | Vpp Route Add +| | | ... | ${dut1} | ${dst_ip} | ${gen_tunnel.ip_mask} +| | | ... | gateway=${dut1_if2_ip4} | interface=${tunnel_if_key} +| | | Vpp Route Add +| | | ... | ${dut1} | ${gen_tunnel.remote} | 32 +| | | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0] +| | | VPP Add IP Neighbor +| | | ... | ${dut1} | ${tunnel_if_key} | ${gen_tunnel.local} | ${tunnel_if_mac} +| | | Vpp Route Add +| | | ... | ${dut1} | ${gen_tunnel.local} | 32 | gateway=${if_ip} +| | | Set Interface State +| | | ... | ${dut1} | ${tunnel_if_key} | up +| | END +| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60} diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot index c3d1e8a5ca..d6df417db1 100644 --- a/resources/libraries/robot/shared/test_teardown.robot +++ b/resources/libraries/robot/shared/test_teardown.robot @@ -61,30 +61,22 @@ | | END | | Clean Sockets On All Nodes | ${nodes} -| Additional Test Tear Down Action For performance +# Additional Test Tear Down Actions in alphabetical order +| Additional Test Tear Down Action For acl | | [Documentation] -| | ... | Additional teardown for tests which uses performance measurement. -| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. -| | -| | ... | TODO: Document what test variables are required or optional. +| | ... | Additional teardown for tests which uses ACL feature. | | -| | Run Keyword If Test Passed | Return From Keyword -| | ${use_latency} = | Get Use Latency -| | ${rate_for_teardown} = | Get Rate For Teardown -| | Call Resetter -| | Set Test Variable | \${extended_debug} | ${True} -| | Send traffic at specified rate -| | ... | trial_duration=${1.0} -| | ... | rate=${rate_for_teardown} -| | ... | trial_multiplicity=${1} -| | ... | use_latency=${use_latency} -| | ... | duration_limit=${1.0} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} -| Additional Test Tear Down Action For packet_trace +| Additional Test Tear Down Action For classify | | [Documentation] -| | ... | Additional teardown for tests which uses packet trace. +| | ... | Additional teardown for tests which uses classify tables. | | -| | Show Packet Trace on All DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} | Additional Test Tear Down Action For container | | [Documentation] @@ -94,23 +86,6 @@ | | | Destroy all '${container_group}' containers | | END -| Additional Test Tear Down Action For vhost -| | [Documentation] -| | ... | Additional teardown for tests which uses vhost(s) and VM(s). -| | -| | Show VPP vhost on all DUTs | ${nodes} -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs - -| Additional Test Tear Down Action For vhost-pt -| | [Documentation] -| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). -| | -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs - | Additional Test Tear Down Action For det44 | | [Documentation] | | ... | Additional teardown for tests which uses DET44 feature. @@ -120,23 +95,13 @@ | | | ... | Show DET44 verbose | ${nodes['${dut}']} | | END -| Additional Test Tear Down Action For nat-ed +| Additional Test Tear Down Action For geneve4 | | [Documentation] -| | ... | Additional teardown for tests which uses NAT feature. +| | ... | Additional teardown for tests which uses GENEVE IPv4 tunnel. | | | | FOR | ${dut} | IN | @{duts} -| | | Show NAT44 Config | ${nodes['${dut}']} -| | | Show NAT44 Summary | ${nodes['${dut}']} -| | | Show NAT Base Data | ${nodes['${dut}']} -| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} -| | END - -| Additional Test Tear Down Action For namespace -| | [Documentation] -| | ... | Additional teardown for tests which uses namespace. -| | -| | FOR | ${dut} | IN | @{duts} -| | | Clean Up Namespaces | ${nodes['${dut}']} +| | | Run Keyword If Test Failed +| | | ... | Show Geneve Tunnel Data | ${nodes['${dut}']} | | END | Additional Test Tear Down Action For linux_bridge @@ -147,15 +112,6 @@ | | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} | | END -| Additional Test Tear Down Action For acl -| | [Documentation] -| | ... | Additional teardown for tests which uses ACL feature. -| | -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Settings | ${dut1} -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} - | Additional Test Tear Down Action For macipacl | | [Documentation] | | ... | Additional teardown for tests which uses MACIP ACL feature. @@ -165,12 +121,49 @@ | | Run Keyword If Test Failed | | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} -| Additional Test Tear Down Action For classify +| Additional Test Tear Down Action For namespace | | [Documentation] -| | ... | Additional teardown for tests which uses classify tables. +| | ... | Additional teardown for tests which uses namespace. | | -| | Run Keyword If Test Failed -| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} +| | FOR | ${dut} | IN | @{duts} +| | | Clean Up Namespaces | ${nodes['${dut}']} +| | END + +| Additional Test Tear Down Action For nat-ed +| | [Documentation] +| | ... | Additional teardown for tests which uses NAT feature. +| | +| | FOR | ${dut} | IN | @{duts} +| | | Show NAT44 Config | ${nodes['${dut}']} +| | | Show NAT44 Summary | ${nodes['${dut}']} +| | | Show NAT Base Data | ${nodes['${dut}']} +| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} +| | END + +| Additional Test Tear Down Action For packet_trace +| | [Documentation] +| | ... | Additional teardown for tests which uses packet trace. +| | +| | Show Packet Trace on All DUTs | ${nodes} + +| Additional Test Tear Down Action For performance +| | [Documentation] +| | ... | Additional teardown for tests which uses performance measurement. +| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. +| | +| | ... | TODO: Document what test variables are required or optional. +| | +| | Run Keyword If Test Passed | Return From Keyword +| | ${use_latency} = | Get Use Latency +| | ${rate_for_teardown} = | Get Rate For Teardown +| | Call Resetter +| | Set Test Variable | \${extended_debug} | ${True} +| | Send traffic at specified rate +| | ... | trial_duration=${1.0} +| | ... | rate=${rate_for_teardown} +| | ... | trial_multiplicity=${1} +| | ... | use_latency=${use_latency} +| | ... | duration_limit=${1.0} | Additional Test Tear Down Action For srv6 | | [Documentation] @@ -182,3 +175,20 @@ | | ... | Show SR Steering Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | | ... | Show SR LocalSIDs on all DUTs | ${nodes} + +| Additional Test Tear Down Action For vhost +| | [Documentation] +| | ... | Additional teardown for tests which uses vhost(s) and VM(s). +| | +| | Show VPP vhost on all DUTs | ${nodes} +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs + +| Additional Test Tear Down Action For vhost-pt +| | [Documentation] +| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). +| | +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot index 1f10787bc1..08f579c9df 100644 --- a/resources/libraries/robot/shared/traffic.robot +++ b/resources/libraries/robot/shared/traffic.robot @@ -61,7 +61,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify headers \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify headers \| \${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| | | @@ -120,7 +120,7 @@ | | ... | *Example:* | | | | ... | \| Packet transmission from port to port should fail \ -| | ... | \| ${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ +| | ... | \| \${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ | | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \ | | ... | \| 08:00:27:ee:fd:b3 \| 08:00:27:7d:fd:10 \| | | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} @@ -150,7 +150,7 @@ | | ... | - dst_ip - Packet destination IP address. Type: string | | | | ... | *Example:* -| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| Send packet and verify marking \| \${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \ | | ... | \| 192.168.122.1 \| | | @@ -190,9 +190,9 @@ | | ... | *Example:* | | | | ... | \| Send VXLAN encapsulated packet and verify received packet \ -| | ... | \| ${tg_node} \| port4 \| port4 \ +| | ... | \| \${tg_node} \| port4 \| port4 \ | | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \ -| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \| +| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| \${102} \| | | | | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if} | | ... | ${tx_src_mac} | ${tx_dst_mac} @@ -231,7 +231,7 @@ | | ... | *Example:* | | | | ... | \| Send ICMP echo request and verify answer \ -| | ... | \| ${nodes['TG']} \| eth2 \ +| | ... | \| \${nodes['TG']} \| eth2 \ | | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \ | | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \| | | @@ -270,14 +270,14 @@ | | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string | | | | ... | *Example:* -| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ +| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ | | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ -| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ -| | ... | \| 192.168.100.3 \| +| | ... | \| \${1001} \| \00} \| 192.168.3.3 \| 192.168.4.4 \ +| | ... | \| 192.168.100.2 \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -329,7 +329,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -373,14 +373,14 @@ | | ... | - dst_tun - Destination tunnel IP address. Type: string | | | | ... | *Example:* -| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ -| | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ -| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ -| | ... | \| 192.168.100.3 \| +| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ +| | ... | \| sixteenbytes_key \| \${auth_alg} \| twentybytessecretkey \ +| | ... | \| \${1001} \| \${1000} \| 192.168.3.3 \| 192.168.4.4 \ +| | ... | \| 192.168.100.2 \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -429,7 +429,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ +| | ... | \| Send packet and verify LISP GPE encap \| \${nodes['TG']} \ | | ... | \| 10.0.0.1 \| 32.0.0.1 \ | | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ @@ -476,7 +476,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -529,7 +529,7 @@ | | | | ... | *Example:* | | ... | \| Send IPv6 Packet and verify SRv6 encapsulation in received packet\ -| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 2002:1:: \ | | ... | \| 2003:2:: \| 2003:1:: \| 2002:2:: \| decap=${False} \ | | ... | \| tg_dstsid3=2002:4:: \| dut_dstsid3=2003:4:: \ @@ -589,7 +589,7 @@ | | ... | *Example:* | | | | ... | \| Send TCP or UDP packet and verify network address translations \ -| | ... | \| ${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ +| | ... | \| \${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ | | ... | \| 08:00:27:c9:6a:d5 \| 192.168.0.0 \| 68.142.68.0 \| 20.0.0.0 \ | | ... | \| TCP \| 1024 \| 8080 \| | | @@ -609,3 +609,46 @@ | | ... | --src_port_in ${src_port_in} | --src_port_out ${src_port_out} | | ... | --dst_port ${dst_port} | | Run Traffic Script On Node | nat.py | ${tg_node} | ${args} + +| Send IP packet and verify GENEVE encapsulation in received packets +| | [Documentation] | Send IP packet from TG to DUT. Receive GENEVE packet\ +| | ... | from DUT on TG and verify GENEVE encapsulation. Send GENEVE packet in\ +| | ... | opposite direction and verify received IP packet. +| | +| | ... | *Arguments:* +| | ... | - node - TG node. Type: dictionary +| | ... | - tx_interface - TG Interface 1. Type: string +| | ... | - rx_interface - TG Interface 2. Type: string +| | ... | - tx_dst_mac - Destination MAC for TX interface / DUT interface 1 MAC. +| | ... | Type: string +| | ... | - rx_src_mac - Source MAC for RX interface / DUT interface 2 MAC. +| | ... | Type: string +| | ... | - tun_local_ip - GENEVE tunnel source IP address. Type: string +| | ... | - tun_remote_ip - GENEVE tunnel destination IP address. Type: string +| | ... | - tun_vni - GENEVE tunnel VNI. Type: integer +| | ... | - tun_src_ip - Source IP address of original IP packet / inner source +| | ... | IP address of GENEVE packet. Type: string +| | ... | - tun_dst_ip - Destination IP address of original IP packet / inner +| | ... | destination IP address of GENEVE packet. Type: string +| | +| | ... | *Example:* +| | ... | \| Send IP packet and verify GENEVE encapsulation in received packets\ +| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 1.1.1.2 \| 1.1.1.1 \ +| | ... | \| 1 \| 10.128.1.0 \| 10.0.1.0 \| 24 \|11.0.1.2\| +| | +| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} +| | ... | ${tx_dst_mac} | ${rx_src_mac} | ${tun_local_ip} | ${tun_remote_ip} +| | ... | ${tun_vni} | ${tun_src_ip} | ${tun_dst_ip} +| | +| | ${tx_src_mac}= | Get Interface Mac | ${node} | ${tx_interface} +| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_interface} +| | ${rx_dst_mac}= | Get Interface Mac | ${node} | ${rx_interface} +| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_interface} +| | ${args}= | Catenate | --rx_if ${rx_if_name} | --tx_if ${tx_if_name} +| | ... | --tx_src_mac ${tx_src_mac} | --tx_dst_mac ${tx_dst_mac} +| | ... | --rx_src_mac ${rx_src_mac} | --rx_dst_mac ${rx_dst_mac} +| | ... | --tun_local_ip ${tun_local_ip} | --tun_remote_ip ${tun_remote_ip} +| | ... | --tun_vni ${tun_vni} | --tun_src_ip ${tun_src_ip} +| | ... | --tun_dst_ip ${tun_dst_ip} +| | Run Traffic Script On Node | geneve_tunnel.py | ${node} | ${args} |