aboutsummaryrefslogtreecommitdiffstats
path: root/resources
diff options
context:
space:
mode:
Diffstat (limited to 'resources')
-rw-r--r--resources/libraries/bash/entry/bootstrap_verify_perf.sh2
-rwxr-xr-xresources/libraries/bash/entry/bootstrap_vpp_device.sh46
-rw-r--r--resources/libraries/bash/entry/per_patch_perf.sh4
-rw-r--r--resources/libraries/bash/function/common.sh220
-rw-r--r--resources/libraries/bash/function/device.sh570
5 files changed, 826 insertions, 16 deletions
diff --git a/resources/libraries/bash/entry/bootstrap_verify_perf.sh b/resources/libraries/bash/entry/bootstrap_verify_perf.sh
index 74edc4cea8..1a0d638da1 100644
--- a/resources/libraries/bash/entry/bootstrap_verify_perf.sh
+++ b/resources/libraries/bash/entry/bootstrap_verify_perf.sh
@@ -34,8 +34,8 @@ source "${BASH_FUNCTION_DIR}/common.sh" || {
}
source "${BASH_FUNCTION_DIR}/gather.sh" || die "Source failed."
common_dirs || die
-get_test_tag_string || die
get_test_code "${1-}" || die
+get_test_tag_string || die
select_topology || die
gather_build || die
check_download_dir || die
diff --git a/resources/libraries/bash/entry/bootstrap_vpp_device.sh b/resources/libraries/bash/entry/bootstrap_vpp_device.sh
new file mode 100755
index 0000000000..6d389d6baf
--- /dev/null
+++ b/resources/libraries/bash/entry/bootstrap_vpp_device.sh
@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/gather.sh" || die "Source failed."
+common_dirs || die
+get_test_code "${1-}" || die
+get_test_tag_string || die
+select_topology || die
+gather_build || die
+check_download_dir || die
+activate_virtualenv "${CSIT_DIR}" || die
+activate_docker_topology || die
+select_vpp_device_tags || die
+compose_pybot_arguments || die
+run_pybot || die
+copy_archives || die
+die_on_pybot_error || die
diff --git a/resources/libraries/bash/entry/per_patch_perf.sh b/resources/libraries/bash/entry/per_patch_perf.sh
index abb1001652..73d4f69500 100644
--- a/resources/libraries/bash/entry/per_patch_perf.sh
+++ b/resources/libraries/bash/entry/per_patch_perf.sh
@@ -46,10 +46,10 @@ prepare_build_parent || die
build_vpp_ubuntu_amd64 "PARENT" || die
prepare_test || die
## Replace previous 4 lines with this to speed up testing.
-#download_builds "https://jenkins.fd.io/sandbox/job/vpp-csit-verify-perf-master-2n-skx/2/artifact/*zip*/archive.zip" || die
+#download_builds "REPLACE_WITH_URL" || die
initialize_csit_dirs || die
-get_test_tag_string || die
get_test_code "${1-}" || die
+get_test_tag_string || die
set_perpatch_dut || die
select_topology || die
activate_virtualenv "${VPP_DIR}" || die
diff --git a/resources/libraries/bash/function/common.sh b/resources/libraries/bash/function/common.sh
index 69c70935c7..db3d86592e 100644
--- a/resources/libraries/bash/function/common.sh
+++ b/resources/libraries/bash/function/common.sh
@@ -21,6 +21,71 @@ set -exuo pipefail
# the code might become more readable (but longer).
+function activate_docker_topology () {
+ # Create virtual vpp-device topology. Output of the function is topology
+ # file describing created environment saved to a file.
+ #
+ # Variables read:
+ # - BASH_FUNCTION_DIR - Path to existing directory this file is located in.
+ # - TOPOLOGIES - Available topologies.
+ # - NODENESS - Node multiplicity of desired testbed.
+ # - FLAVOR - Node flavor string, usually describing the processor.
+ # Variables set:
+ # - WORKING_TOPOLOGY - Path to topology file.
+
+ set -exuo pipefail
+
+ source "${BASH_FUNCTION_DIR}/device.sh" || {
+ die "Source failed!"
+ }
+
+ device_image="$(< ${CSIT_DIR}/VPP_DEVICE_IMAGE)"
+ case_text="${NODENESS}_${FLAVOR}"
+ case "${case_text}" in
+ "1n_skx")
+ # We execute reservation over csit-shim-dcr (ssh) which runs sourced
+ # script's functions. Env variables are read from ssh output
+ # back to localhost for further processing.
+ hostname=$(grep search /etc/resolv.conf | cut -d' ' -f3)
+ ssh="ssh root@${hostname} -p 6022"
+ run="activate_wrapper ${NODENESS} ${FLAVOR} ${device_image}"
+ env_vars=$(${ssh} "$(declare -f); ${run}") || {
+ die "Topology reservation via shim-dcr failed!"
+ }
+ set -a
+ source <(echo "$env_vars" | grep -v /usr/bin/docker) || {
+ die "Source failed!"
+ }
+ set +a
+ ;;
+ "1n_vbox")
+ # We execute reservation on localhost. Sourced script automatially
+ # sets environment variables for further processing.
+ activate_wrapper "${NODENESS}" "${FLAVOR}" "${device_image}" || die
+ ;;
+ *)
+ die "Unknown specification: ${case_text}!"
+ esac
+
+ trap 'deactivate_docker_topology' EXIT || {
+ die "Trap attempt failed, please cleanup manually. Aborting!"
+ }
+
+ # Replace all variables in template with those in environment.
+ source <(echo 'cat <<EOF >topo.yml'; cat ${TOPOLOGIES[0]}; echo EOF;) || {
+ die "Topology file create failed!"
+ }
+
+ WORKING_TOPOLOGY="/tmp/topology.yaml"
+ mv topo.yml "${WORKING_TOPOLOGY}" || {
+ die "Topology move failed!"
+ }
+ cat ${WORKING_TOPOLOGY} | grep -v password || {
+ die "Topology read failed!"
+ }
+}
+
+
function activate_virtualenv () {
set -exuo pipefail
@@ -154,13 +219,28 @@ function compose_pybot_arguments () {
# - DUT - CSIT test/ subdirectory, set while processing tags.
# - TAGS - Array variable holding selected tag boolean expressions.
# - TOPOLOGIES_TAGS - Tag boolean expression filtering tests for topology.
+ # - TEST_CODE - The test selection string from environment or argument.
# Variables set:
# - PYBOT_ARGS - String holding part of all arguments for pybot.
# - EXPANDED_TAGS - Array of strings pybot arguments compiled from tags.
# No explicit check needed with "set -u".
- PYBOT_ARGS=("--loglevel" "TRACE" "--variable" "TOPOLOGY_PATH:${WORKING_TOPOLOGY}")
- PYBOT_ARGS+=("--suite" "tests.${DUT}.perf")
+ PYBOT_ARGS=("--loglevel" "TRACE")
+ PYBOT_ARGS+=("--variable" "TOPOLOGY_PATH:${WORKING_TOPOLOGY}")
+
+ case "${TEST_CODE}" in
+ *"device"*)
+ PYBOT_ARGS+=("--suite" "tests.${DUT}.device")
+ ;;
+ *"func"*)
+ PYBOT_ARGS+=("--suite" "tests.${DUT}.func")
+ ;;
+ *"perf"*)
+ PYBOT_ARGS+=("--suite" "tests.${DUT}.perf")
+ ;;
+ *)
+ die "Unknown specification: ${TEST_CODE}"
+ esac
EXPANDED_TAGS=()
for tag in "${TAGS[@]}"; do
@@ -197,6 +277,38 @@ function copy_archives () {
}
+function deactivate_docker_topology () {
+ # Deactivate virtual vpp-device topology by removing containers.
+ #
+ # Variables read:
+ # - NODENESS - Node multiplicity of desired testbed.
+ # - FLAVOR - Node flavor string, usually describing the processor.
+
+ set -exuo pipefail
+
+ case_text="${NODENESS}_${FLAVOR}"
+ case "${case_text}" in
+ "1n_skx")
+ hostname=$(grep search /etc/resolv.conf | cut -d' ' -f3)
+ ssh="ssh root@${hostname} -p 6022"
+ env_vars="$(env | grep CSIT_ | tr '\n' ' ' )"
+ ${ssh} "$(declare -f); deactivate_wrapper ${env_vars}" || {
+ die "Topology cleanup via shim-dcr failed!"
+ }
+ ;;
+ "1n_vbox")
+ enter_mutex || die
+ clean_environment || {
+ die "Topology cleanup locally failed!"
+ }
+ exit_mutex || die
+ ;;
+ *)
+ die "Unknown specification: ${case_text}!"
+ esac
+}
+
+
function die () {
# Print the message to standard error end exit with error code specified
# by the second argument.
@@ -251,6 +363,14 @@ function get_test_code () {
fi
case "${TEST_CODE}" in
+ *"1n-vbox"*)
+ NODENESS="1n"
+ FLAVOR="vbox"
+ ;;
+ *"1n-skx"*)
+ NODENESS="1n"
+ FLAVOR="skx"
+ ;;
*"2n-skx"*)
NODENESS="2n"
FLAVOR="skx"
@@ -275,6 +395,7 @@ function get_test_tag_string () {
# Variables read:
# - GERRIT_EVENT_TYPE - Event type set by gerrit, can be unset.
# - GERRIT_EVENT_COMMENT_TEXT - Comment text, read for "comment-added" type.
+ # - TEST_CODE - The test selection string from environment or argument.
# Variables set:
# - TEST_TAG_STRING - The string following "perftest" in gerrit comment,
# or empty.
@@ -283,12 +404,27 @@ function get_test_tag_string () {
trigger=""
if [[ "${GERRIT_EVENT_TYPE-}" == "comment-added" ]]; then
- # On parsing error, ${trigger} stays empty.
- trigger="$(echo "${GERRIT_EVENT_COMMENT_TEXT}" \
- | grep -oE '(perftest$|perftest[[:space:]].+$)')" || true
+ case "${TEST_CODE}" in
+ *"device"*)
+ # On parsing error, ${trigger} stays empty.
+ trigger="$(echo "${GERRIT_EVENT_COMMENT_TEXT}" \
+ | grep -oE '(devicetest$|devicetest[[:space:]].+$)')" \
+ || true
+ # Set test tags as string.
+ TEST_TAG_STRING="${trigger#$"devicetest"}"
+ ;;
+ *"perf"*)
+ # On parsing error, ${trigger} stays empty.
+ trigger="$(echo "${GERRIT_EVENT_COMMENT_TEXT}" \
+ | grep -oE '(perftest$|perftest[[:space:]].+$)')" \
+ || true
+ # Set test tags as string.
+ TEST_TAG_STRING="${trigger#$"perftest"}"
+ ;;
+ *)
+ die "Unknown specification: ${TEST_CODE}"
+ esac
fi
- # Set test tags as string.
- TEST_TAG_STRING="${trigger#$"perftest"}"
}
@@ -565,6 +701,52 @@ function select_tags () {
}
+function select_vpp_device_tags () {
+
+ set -exuo pipefail
+
+ # Variables read:
+ # - TEST_CODE - String affecting test selection, usually jenkins job name.
+ # - TEST_TAG_STRING - String selecting tags, from gerrit comment.
+ # Can be unset.
+ # Variables set:
+ # - TAGS - Array of processed tag boolean expressions.
+
+ case "${TEST_CODE}" in
+ # Select specific performance tests based on jenkins job type variable.
+ * )
+ if [[ -z "${TEST_TAG_STRING-}" ]]; then
+ # If nothing is specified, we will run pre-selected tests by
+ # following tags. Items of array will be concatenated by OR
+ # in Robot Framework.
+ test_tag_array=()
+ else
+ # If trigger contains tags, split them into array.
+ test_tag_array=(${TEST_TAG_STRING//:/ })
+ fi
+ ;;
+ esac
+
+ TAGS=()
+
+ # We will prefix with perftest to prevent running other tests
+ # (e.g. Functional).
+ prefix="devicetestAND"
+ if [[ "${TEST_CODE}" == "vpp-"* ]]; then
+ # Automatic prefixing for VPP jobs to limit testing.
+ prefix="${prefix}"
+ fi
+ for tag in "${test_tag_array[@]}"; do
+ if [[ ${tag} == "!"* ]]; then
+ # Exclude tags are not prefixed.
+ TAGS+=("${tag}")
+ else
+ TAGS+=("${prefix}${tag}")
+ fi
+ done
+}
+
+
function select_topology () {
set -exuo pipefail
@@ -573,7 +755,7 @@ function select_topology () {
# - NODENESS - Node multiplicity of testbed, either "2n" or "3n".
# - FLAVOR - Node flavor string, currently either "hsw" or "skx".
# - CSIT_DIR - Path to existing root of local CSIT git repository.
- # - TOPOLOGIES_DIR - Path to existing directory with available tpologies.
+ # - TOPOLOGIES_DIR - Path to existing directory with available topologies.
# Variables set:
# - TOPOLOGIES - Array of paths to suitable topology yaml files.
# - TOPOLOGIES_TAGS - Tag expression selecting tests for the topology.
@@ -582,13 +764,17 @@ function select_topology () {
case_text="${NODENESS}_${FLAVOR}"
case "${case_text}" in
- "3n_hsw")
+ "1n_vbox")
TOPOLOGIES=(
- "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed1.yaml"
- "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed2.yaml"
- "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed3.yaml"
+ "${TOPOLOGIES_DIR}/vpp_device.template"
)
- TOPOLOGIES_TAGS="3_node_single_link_topo"
+ TOPOLOGIES_TAGS="2_node_single_link_topo"
+ ;;
+ "1n_skx")
+ TOPOLOGIES=(
+ "${TOPOLOGIES_DIR}/vpp_device.template"
+ )
+ TOPOLOGIES_TAGS="2_node_single_link_topo"
;;
"2n_skx")
TOPOLOGIES=(
@@ -606,6 +792,14 @@ function select_topology () {
)
TOPOLOGIES_TAGS="3_node_*_link_topo"
;;
+ "3n_hsw")
+ TOPOLOGIES=(
+ "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed1.yaml"
+ "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed2.yaml"
+ "${TOPOLOGIES_DIR}/lf_3n_hsw_testbed3.yaml"
+ )
+ TOPOLOGIES_TAGS="3_node_single_link_topo"
+ ;;
*)
# No falling back to 3n_hsw default, that should have been done
# by the function which has set NODENESS and FLAVOR.
diff --git a/resources/libraries/bash/function/device.sh b/resources/libraries/bash/function/device.sh
new file mode 100644
index 0000000000..e4ed319c7f
--- /dev/null
+++ b/resources/libraries/bash/function/device.sh
@@ -0,0 +1,570 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -exuo pipefail
+
+# This library defines functions used by multiple entry scripts.
+# Keep functions ordered alphabetically, please.
+
+function activate_wrapper () {
+ # Acts as wrapper for activate docker topology.
+ #
+ # Variables read:
+ # - ${1} - Node multiplicity of desired testbed.
+ # - ${2} - Node flavor string, usually describing the processor.
+ # - ${3} - CSIT-SUT-DCR image name and version.
+
+ set -exuo pipefail
+
+ enter_mutex || die
+ get_available_interfaces "${1}" "${2}" || die
+ start_topology_containers "${3}" || die
+ bind_interfaces_to_containers || die
+ set_env_variables || die
+ print_env_variables || die
+ exit_mutex || die
+}
+
+
+function bind_interfaces_to_containers () {
+ # Bind linux network interface to container and create symlink for PCI
+ # address in container.
+ #
+ # Variables read:
+ # - DCR_UUIDS - Docker Container UUIDs.
+ # - DCR_CPIDS - Docker Container PIDs (namespaces).
+ # - DUT1_NETDEVS - List of network devices allocated to DUT1 container.
+ # - PCI_ADDR - PCI address of network device.
+ # - TG_NETDEVS - List of network devices allocated to TG container.
+ # Variables set:
+ # - NETDEV - Linux network interface.
+
+ set -exuo pipefail
+
+ for NETDEV in "${TG_NETDEVS[@]}"; do
+ get_pci_addr || die
+ link_target=$(readlink -f /sys/bus/pci/devices/"${PCI_ADDR}") || {
+ die "Reading symlink for PCI address failed!"
+ }
+ cmd="ln -s ${link_target} /sys/bus/pci/devices/${PCI_ADDR}"
+
+ sudo ip link set ${NETDEV} netns ${DCR_CPIDS[tg]} || {
+ die "Moving interface to ${DCR_CPIDS[tg]} namespace failed!"
+ }
+ docker exec "${DCR_UUIDS[tg]}" ${cmd} || {
+ die "Linking PCI address in container failed!"
+ }
+ done
+ for NETDEV in "${DUT1_NETDEVS[@]}"; do
+ get_pci_addr || die
+ link_target=$(readlink -f /sys/bus/pci/devices/"${PCI_ADDR}") || {
+ die "Reading symlink for PCI address failed!"
+ }
+ cmd="ln -s ${link_target} /sys/bus/pci/devices/${PCI_ADDR}"
+
+ sudo ip link set ${NETDEV} netns ${DCR_CPIDS[dut1]} || {
+ die "Moving interface to ${DCR_CPIDS[dut1]} namespace failed!"
+ }
+ docker exec "${DCR_UUIDS[dut1]}" ${cmd} || {
+ die "Linking PCI address in container failed!"
+ }
+ done
+}
+
+
+function bind_interfaces_to_driver () {
+ # Bind network interface specified by parameter to driver specified by
+ # parameter.
+ #
+ # Variables read:
+ # - ADDR - PCI address of network interface.
+ # - DRIVER - Kernel driver.
+
+ pci_path="/sys/bus/pci/devices/${ADDR}"
+ drv_path="/sys/bus/pci/drivers/${DRIVER}"
+ vd="$(cat ${pci_path}/vendor ${pci_path}/device)" || {
+ die "Failed to retrieve interface details!"
+ }
+ set +e
+ echo ${vd} | sudo tee ${drv_path}/new_id
+ set -e
+ echo ${ADDR} | sudo tee ${pci_path}/driver/unbind || {
+ die "Failed to unbind interface ${ADDR}!"
+ }
+ echo ${ADDR} | sudo tee ${drv_path}/bind || {
+ die "Failed to bind interface ${ADDR}!"
+ }
+}
+
+
+function clean_environment () {
+ # Cleanup environment by removing topology containers and binding
+ # interfaces back to original driver.
+ #
+ # Variables read:
+ # - DCR_UUIDS - Docker Container UUIDs.
+ # - DUT1_PCIDEVS - List of PCI addresses of devices of DUT1 container.
+ # - TG_PCIDEVS - List of PCI addresses of devices of TG container.
+ # Variables set:
+ # - ADDR - PCI address of network interface.
+ # - DRIVER - Kernel driver.
+
+ set -exuo pipefail
+
+ # Kill docker containers.
+ docker rm --force "${DCR_UUIDS[@]}" || die "Cleanup containers failed!"
+
+ # Rebind interfaces back to kernel drivers.
+ for ADDR in ${TG_PCIDEVS[@]}; do
+ DRIVER="${TG_DRIVERS[0]}"
+ bind_interfaces_to_driver || die
+ done
+ for ADDR in ${DUT1_PCIDEVS[@]}; do
+ DRIVER="${DUT1_DRIVERS[0]}"
+ bind_interfaces_to_driver || die
+ done
+}
+
+
+function clean_environment_on_exit () {
+ # Cleanup environment by removing topology containers and binding
+ # interfaces back to original driver only if exit code is not 0.
+ # This function acts as workaround as 'set -eu' does not trigger ERR trap.
+
+ if [ $? -ne 0 ]; then
+ clean_environment || die
+ fi
+}
+
+
+function deactivate_wrapper () {
+ # Acts as wrapper for deactivate docker topology.
+ #
+ # Variables read:
+ # - ${@} - CSIT environment variables.
+
+ set -exuo pipefail
+
+ enter_mutex || die
+ read_env_variables "${@}" || die
+ clean_environment || die
+ exit_mutex || die
+}
+
+
+function die () {
+ # Print the message to standard error end exit with error code specified
+ # by the second argument.
+ #
+ # Hardcoded values:
+ # - The default error message.
+ # Arguments:
+ # - ${1} - The whole error message, be sure to quote. Optional
+ # - ${2} - the code to exit with, default: 1.
+
+ set -x
+ set +eu
+ warn "${1:-Unspecified run-time error occurred!}"
+ exit "${2:-1}"
+}
+
+
+function enter_mutex () {
+ # Enter mutual exclusion for protecting execution from starvation and
+ # deadlock.
+
+ set -exuo pipefail
+
+ mutex_timeout=3600
+ mutex_file="/tmp/mutex_file"
+
+ # Create mutex.
+ exec {lock_fd}>${mutex_file} || {
+ die "Mutex enter failed!"
+ }
+ flock --timeout "${mutex_timeout}" "${lock_fd}" || {
+ die "Calling flock() failed!"
+ }
+ # ----------------------
+ # Enter mutex succeeded.
+ warn "Mutex enter succeeded for PID $$."
+}
+
+
+function exit_mutex () {
+ # Exit mutual exclusion.
+
+ set -exuo pipefail
+
+ # ---------------------
+ # Remove mutex so we are not blocking others anymore.
+ flock -u "${lock_fd}" || {
+ die "Mutex destroy failed!"
+ }
+ warn "Mutex leave succeeded for PID $$."
+}
+
+
+function get_available_interfaces () {
+ # Find and get available Virtual functions.
+ #
+ # Arguments:
+ # - ${1} - Node flavor string, usually describing the processor and node
+ # multiplicity of desired testbed, separated by underscore.
+ # Variables set:
+ # - DUT1_NETDEVS - List of network devices allocated to DUT1 container.
+ # - DUT1_PCIDEVS - List of PCI addresses allocated to DUT1 container.
+ # - DUT1_NETMACS - List of MAC addresses allocated to DUT1 container.
+ # - DUT1_DRIVERS - List of interface drivers to DUT1 container.
+ # - TG_NETDEVS - List of network devices allocated to TG container.
+ # - TG_PCIDEVS - List of PCI addresses allocated to TG container.
+ # - TG_NETMACS - List of MAC addresses allocated to TG container.
+ # - TG_DRIVERS - List of interface drivers to TG container.
+
+ set -exuo pipefail
+
+ # Following code is specifing VFs ID based on nodeness and flavor.
+ # As there is great variability in hardware configuration outside LF,
+ # from bootstrap architecure point of view these are considered as flavors.
+ # Anyone can override flavor for its own machine and add condition here.
+ # See http://pci-ids.ucw.cz/v2.2/pci.ids for more info.
+ case_text="${1}_${2}"
+ case "${case_text}" in
+ "1n_skx")
+ # Add Intel Corporation XL710/X710 Virtual Function to the
+ # whitelist.
+ pci_id="0x154c"
+ tg_netdev=(enp24)
+ dut1_netdev=(enp59)
+ ;;
+ "1n_vbox")
+ # Add Intel Corporation 82545EM Gigabit Ethernet Controller to the
+ # whitelist.
+ pci_id="0x100f"
+ tg_netdev=(eth1 eth2)
+ dut1_netdev=(eth3 eth4)
+ ;;
+ *)
+ die "Unknown specification: ${case_text}!"
+ esac
+
+ net_path="/sys/bus/pci/devices/*/net/*"
+
+ # TG side of connections.
+ TG_NETDEVS=()
+ TG_PCIDEVS=()
+ TG_NETMACS=()
+ TG_DRIVERS=()
+ # DUT1 side of connections.
+ DUT1_NETDEVS=()
+ DUT1_PCIDEVS=()
+ DUT1_NETMACS=()
+ DUT1_DRIVERS=()
+
+ # Following code is filtering available VFs represented by network device
+ # name. Only allowed VFs PCI IDs are used.
+ for netdev in \
+ $(find ${net_path} -type d -name . -o -prune -exec basename '{}' ';');
+ do
+ if grep -q "${pci_id}" "/sys/class/net/${netdev}/device/device"; then
+ # We will filter to TG/DUT1 side of connection (this can be in
+ # future overriden by more advanced conditions for mapping).
+ for sub in ${tg_netdev[@]}; do
+ if [[ "${netdev#*$sub}" != "${netdev}" ]]; then
+ tg_side+=(${netdev})
+ fi
+ done
+ for sub in ${dut1_netdev[@]}; do
+ if [[ "${netdev#*$sub}" != "${netdev}" ]]; then
+ dut1_side+=(${netdev})
+ fi
+ done
+ fi
+ done
+
+ for netdev in "${tg_side[@]::2}"; do
+ TG_NETDEVS+=(${netdev})
+ done
+ for netdev in "${dut1_side[@]::2}"; do
+ DUT1_NETDEVS+=(${netdev})
+ done
+
+ for NETDEV in "${TG_NETDEVS[@]}"; do
+ get_pci_addr
+ get_mac_addr
+ get_krn_driver
+ TG_PCIDEVS+=(${PCI_ADDR})
+ TG_NETMACS+=(${MAC_ADDR})
+ TG_DRIVERS+=(${KRN_DRIVER})
+ done
+ for NETDEV in "${DUT1_NETDEVS[@]}"; do
+ get_pci_addr
+ get_mac_addr
+ get_krn_driver
+ DUT1_PCIDEVS+=(${PCI_ADDR})
+ DUT1_NETMACS+=(${MAC_ADDR})
+ DUT1_DRIVERS+=(${KRN_DRIVER})
+ done
+
+ # We need at least two interfaces for TG/DUT1 for building topology.
+ if [ "${#TG_NETDEVS[@]}" -ne 2 ] || [ "${#DUT1_NETDEVS[@]}" -ne 2 ]; then
+ die "Not enough linux network interfaces found!"
+ fi
+ if [ "${#TG_PCIDEVS[@]}" -ne 2 ] || [ "${#DUT1_PCIDEVS[@]}" -ne 2 ]; then
+ die "Not enough pci interfaces found!"
+ fi
+}
+
+
+function get_krn_driver () {
+ # Get kernel driver from linux network device name.
+ #
+ # Variables read:
+ # - PCI_ADDR - PCI address of network device.
+ # Variables set:
+ # - KRN_DRIVER - Kernel driver of network device.
+
+ set -exuo pipefail
+
+ pci_path="/sys/bus/pci/devices/${PCI_ADDR}"
+ KRN_DRIVER="$(basename $(readlink -f ${pci_path}/driver))" || {
+ die "Failed to get kernel driver of PCI interface!"
+ }
+}
+
+
+function get_mac_addr () {
+ # Get MAC address from linux network device name.
+ #
+ # Variables read:
+ # - NETDEV - Linux network device name.
+ # Variables set:
+ # - MAC_ADDR - MAC address of network device.
+
+ set -exuo pipefail
+
+ if [ -d /sys/class/net/${NETDEV}/device ]; then
+ MAC_ADDR="$(</sys/class/net/${NETDEV}/address)" || {
+ die "Failed to get MAC address of linux network interface!"
+ }
+ fi
+}
+
+
+function get_pci_addr () {
+ # Get PCI address in <domain>:<bus:<device>.<func> format from linux network
+ # device name.
+ #
+ # Variables read:
+ # - NETDEV - Linux network device name.
+ # Variables set:
+ # - PCI_ADDR - PCI address of network device.
+
+ set -exuo pipefail
+
+ if [ -d /sys/class/net/${NETDEV}/device ]; then
+ PCI_ADDR=$(basename $(readlink /sys/class/net/${NETDEV}/device)) || {
+ die "Failed to get PCI address of linux network interface!"
+ }
+ fi
+ if [ ! -d /sys/bus/pci/devices/${PCI_ADDR} ]; then
+ die "PCI device ${NETDEV} doesn't exist!"
+ fi
+}
+
+
+function installed () {
+
+ set -exuo pipefail
+
+ # Check if the given utility is installed. Fail if not installed.
+ #
+ # Arguments:
+ # - ${1} - Utility to check.
+ # Returns:
+ # - 0 - If command is installed.
+ # - 1 - If command is not installed.
+
+ command -v "${1}"
+}
+
+
+function print_env_variables () {
+ # Get environment variables prefixed by CSIT_.
+
+ set -exuo pipefail
+
+ env | grep CSIT_
+}
+
+
+function read_env_variables () {
+ # Read environment variables from parameters.
+ #
+ # Arguments:
+ # - ${@} - Variables passed as an argument.
+
+ set -exuo pipefail
+
+ for param in "$@"; do
+ export "${param}"
+ done
+ declare -gA DCR_UUIDS
+ DCR_UUIDS+=([tg]="${CSIT_TG_UUID}")
+ DCR_UUIDS+=([dut1]="${CSIT_DUT1_UUID}")
+ TG_PCIDEVS=("${CSIT_TG_INTERFACES_PORT1_PCI}")
+ TG_DRIVERS=("${CSIT_TG_INTERFACES_PORT1_DRV}")
+ TG_PCIDEVS+=("${CSIT_TG_INTERFACES_PORT2_PCI}")
+ TG_DRIVERS+=("${CSIT_TG_INTERFACES_PORT2_DRV}")
+ DUT1_PCIDEVS=("${CSIT_DUT1_INTERFACES_PORT1_PCI}")
+ DUT1_DRIVERS=("${CSIT_DUT1_INTERFACES_PORT1_DRV}")
+ DUT1_PCIDEVS+=("${CSIT_DUT1_INTERFACES_PORT2_PCI}")
+ DUT1_DRIVERS+=("${CSIT_DUT1_INTERFACES_PORT2_DRV}")
+}
+
+
+function set_env_variables () {
+ # Set environment variables.
+ #
+ # Variables read:
+ # - DCR_UUIDS - Docker Container UUIDs.
+ # - DCR_PORTS - Docker Container's SSH ports.
+ # - DUT1_NETMACS - List of network devices MAC addresses of DUT1 container.
+ # - DUT1_PCIDEVS - List of PCI addresses of devices of DUT1 container.
+ # - DUT1_DRIVERS - List of interface drivers to DUT1 container.
+ # - TG_NETMACS - List of network devices MAC addresses of TG container.
+ # - TG_PCIDEVS - List of PCI addresses of devices of TG container.
+ # - TG_DRIVERS - List of interface drivers to TG container.
+
+ set -exuo pipefail
+
+ set -a
+ CSIT_TG_HOST="$(hostname --all-ip-addresses | awk '{print $1}')" || {
+ die "Reading hostname IP address failed!"
+ }
+ CSIT_TG_PORT="${DCR_PORTS[tg]#*:}"
+ CSIT_TG_UUID="${DCR_UUIDS[tg]}"
+ CSIT_TG_ARCH="$(uname -i)" || {
+ die "Reading machine architecture failed!"
+ }
+ CSIT_DUT1_HOST="$(hostname --all-ip-addresses | awk '{print $1}')" || {
+ die "Reading hostname IP address failed!"
+ }
+ CSIT_DUT1_PORT="${DCR_PORTS[dut1]#*:}"
+ CSIT_DUT1_UUID="${DCR_UUIDS[dut1]}"
+ CSIT_DUT1_ARCH="$(uname -i)" || {
+ die "Reading machine architecture failed!"
+ }
+ CSIT_TG_INTERFACES_PORT1_MAC="${TG_NETMACS[0]}"
+ CSIT_TG_INTERFACES_PORT1_PCI="${TG_PCIDEVS[0]}"
+ CSIT_TG_INTERFACES_PORT1_DRV="${TG_DRIVERS[0]}"
+ CSIT_TG_INTERFACES_PORT2_MAC="${TG_NETMACS[1]}"
+ CSIT_TG_INTERFACES_PORT2_PCI="${TG_PCIDEVS[1]}"
+ CSIT_TG_INTERFACES_PORT2_DRV="${TG_DRIVERS[1]}"
+ CSIT_DUT1_INTERFACES_PORT1_MAC="${DUT1_NETMACS[0]}"
+ CSIT_DUT1_INTERFACES_PORT1_PCI="${DUT1_PCIDEVS[0]}"
+ CSIT_DUT1_INTERFACES_PORT1_DRV="${DUT1_DRIVERS[0]}"
+ CSIT_DUT1_INTERFACES_PORT2_MAC="${DUT1_NETMACS[1]}"
+ CSIT_DUT1_INTERFACES_PORT2_PCI="${DUT1_PCIDEVS[1]}"
+ CSIT_DUT1_INTERFACES_PORT2_DRV="${DUT1_DRIVERS[1]}"
+ set +a
+}
+
+
+function start_topology_containers () {
+ # Starts csit-sut-dcr docker containers for TG/DUT1.
+ #
+ # Variables read:
+ # - CSIT_DIR - Path to existing root of local CSIT git repository.
+ # Variables set:
+ # - DCR_UUIDS - Docker Container UUIDs.
+ # - DCR_PORTS - Docker Container SSH TCP ports.
+ # - DCR_CPIDS - Docker Container PIDs (namespaces).
+
+ set -exuo pipefail
+
+ if ! installed docker; then
+ die "Docker not present. Please install before continue!"
+ fi
+
+ # If the IMAGE is not already loaded then docker run will pull the IMAGE,
+ # and all image dependencies, before it starts the container.
+ dcr_image="${1}"
+ # Run the container in the background and print the new container ID.
+ dcr_stc_params="--detach=true "
+ # Give extended privileges to this container. A "privileged" container is
+ # given access to all devices and able to run nested containers.
+ dcr_stc_params+="--privileged "
+ # Publish all exposed ports to random ports on the host interfaces.
+ dcr_stc_params+="--publish-all "
+ # Automatically remove the container when it exits.
+ dcr_stc_params+="--rm "
+ # Size of /dev/shm.
+ dcr_stc_params+="--shm-size 512M "
+ # Override access to PCI bus by attaching a filesystem mount to the
+ # container.
+ dcr_stc_params+="--mount type=tmpfs,destination=/sys/bus/pci/devices "
+ # Mount vfio to be able to bind to see binded interfaces. We cannot use
+ # --device=/dev/vfio as this does not see newly binded interfaces.
+ dcr_stc_params+="--volume /dev/vfio:/dev/vfio "
+
+ # Docker Container UUIDs.
+ declare -gA DCR_UUIDS
+ # Docker Container SSH TCP ports.
+ declare -gA DCR_PORTS
+ # Docker Container PIDs (namespaces).
+ declare -gA DCR_CPIDS
+
+ # Run TG and DUT1. As initial version we do support only 2-node.
+ params=(${dcr_stc_params} --name csit-tg-$(uuidgen) ${dcr_image})
+ DCR_UUIDS+=([tg]="$(docker run "${params[@]}")") || {
+ die "Failed to start TG docker container!"
+ }
+ params=(${dcr_stc_params} --name csit-dut1-$(uuidgen) ${dcr_image})
+ DCR_UUIDS+=([dut1]="$(docker run "${params[@]}")") || {
+ die "Failed to start DUT1 docker container!"
+ }
+
+ trap 'clean_environment_on_exit' EXIT || {
+ die "Trap attempt failed, please cleanup manually. Aborting!"
+ }
+
+ # Get Containers TCP ports.
+ params=(${DCR_UUIDS[tg]})
+ DCR_PORTS+=([tg]="$(docker port "${params[@]}")") || {
+ die "Failed to get port of TG docker container!"
+ }
+ params=(${DCR_UUIDS[dut1]})
+ DCR_PORTS+=([dut1]="$(docker port "${params[@]}")") || {
+ die "Failed to get port of DUT1 docker container!"
+ }
+
+ # Get Containers PIDs.
+ params=(--format="{{ .State.Pid }}" ${DCR_UUIDS[tg]})
+ DCR_CPIDS+=([tg]="$(docker inspect "${params[@]}")") || {
+ die "Failed to get PID of TG docker container!"
+ }
+ params=(--format="{{ .State.Pid }}" ${DCR_UUIDS[dut1]})
+ DCR_CPIDS+=([dut1]="$(docker inspect "${params[@]}")") || {
+ die "Failed to get PID of DUT1 docker container!"
+ }
+}
+
+function warn () {
+ # Print the message to standard error.
+ #
+ # Arguments:
+ # - ${@} - The text of the message.
+
+ echo "$@" >&2
+}