diff options
Diffstat (limited to 'resources')
| -rw-r--r-- | resources/libraries/python/IPsecUtil.py | 219 | ||||
| -rw-r--r-- | resources/libraries/python/InterfaceUtil.py | 2 |
2 files changed, 121 insertions, 100 deletions
diff --git a/resources/libraries/python/IPsecUtil.py b/resources/libraries/python/IPsecUtil.py index 7da1c55f82..e8fdad3901 100644 --- a/resources/libraries/python/IPsecUtil.py +++ b/resources/libraries/python/IPsecUtil.py @@ -1,4 +1,4 @@ -# Copyright (c) 2019 Cisco and/or its affiliates. +# Copyright (c) 2020 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -753,7 +753,8 @@ class IPsecUtil: @staticmethod def vpp_ipsec_create_tunnel_interfaces( nodes, if1_ip_addr, if2_ip_addr, if1_key, if2_key, n_tunnels, - crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range): + crypto_alg, integ_alg, raddr_ip1, raddr_ip2, raddr_range, + existing_tunnels=0): """Create multiple IPsec tunnel interfaces between two VPP nodes. :param nodes: VPP nodes to create tunnel interfaces. @@ -761,7 +762,7 @@ class IPsecUtil: :param if2_ip_addr: VPP node 2 interface IPv4/IPv6 address. :param if1_key: VPP node 1 interface key from topology file. :param if2_key: VPP node 2 interface key from topology file. - :param n_tunnels: Number of tunnel interfaces to create. + :param n_tunnels: Number of tunnel interfaces to be there at the end. :param crypto_alg: The encryption algorithm name. :param integ_alg: The integrity algorithm name. :param raddr_ip1: Policy selector remote IPv4/IPv6 start address for the @@ -771,6 +772,8 @@ class IPsecUtil: :param raddr_range: Mask specifying range of Policy selector Remote IPv4/IPv6 addresses. Valid values are from 1 to 32 in case of IPv4 and to 128 in case of IPv6. + :param existing_tunnels: Number of tunnel interfaces before creation. + Useful mainly for reconf tests. Default 0. :type nodes: dict :type if1_ip_addr: str :type if2_ip_addr: str @@ -782,8 +785,10 @@ class IPsecUtil: :type raddr_ip1: string :type raddr_ip2: string :type raddr_range: int + :type existing_tunnels: int """ n_tunnels = int(n_tunnels) + existing_tunnels = int(existing_tunnels) spi_1 = 100000 spi_2 = 200000 if1_ip = ip_address(if1_ip_addr) @@ -793,7 +798,7 @@ class IPsecUtil: addr_incr = 1 << (128 - raddr_range) if if1_ip.version == 6 \ else 1 << (32 - raddr_range) - if n_tunnels > 10: + if n_tunnels - existing_tunnels > 10: tmp_fn1 = u"/tmp/ipsec_create_tunnel_dut1.config" tmp_fn2 = u"/tmp/ipsec_create_tunnel_dut2.config" if1_n = Topology.get_interface_name(nodes[u"DUT1"], if1_key) @@ -803,17 +808,20 @@ class IPsecUtil: vat = VatExecutor() with open(tmp_fn1, 'w') as tmp_f1, open(tmp_fn2, 'w') as tmp_f2: rmac = Topology.get_interface_mac(nodes[u"DUT2"], if2_key) - tmp_f1.write( - f"exec create loopback interface\n" - f"exec set interface state loop0 up\n" - f"exec set interface ip address " - f"{if1_n} {if2_ip - 1}/{mask}\n" - f"exec set ip neighbor {if1_n} {if2_ip}/{mask2} {rmac} static\n" - ) - tmp_f2.write( - f"exec set interface ip address {if2_n} {if2_ip}/{mask}\n" - ) - for i in range(n_tunnels): + if not existing_tunnels: + tmp_f1.write( + f"exec create loopback interface\n" + f"exec set interface state loop0 up\n" + f"exec set interface ip address " + f"{if1_n} {if2_ip - 1}/{mask}\n" + f"exec set ip neighbor {if1_n} {if2_ip}/{mask2} {rmac}" + f" static\n" + ) + tmp_f2.write( + f"exec set interface ip address {if2_n}" + f" {if2_ip}/{mask}\n" + ) + for i in range(existing_tunnels, n_tunnels): ckey = gen_key( IPsecUtil.get_crypto_alg_key_len(crypto_alg) ).hex() @@ -861,10 +869,12 @@ class IPsecUtil: os.remove(tmp_fn2) with open(tmp_fn1, 'w') as tmp_f1, open(tmp_fn2, 'w') as tmp_f2: - tmp_f2.write( - f"exec ip route add {if1_ip}/8 via {if2_ip - 1} {if2_n}\n" - ) - for i in range(n_tunnels): + if not existing_tunnels: + tmp_f2.write( + f"exec ip route add {if1_ip}/8 via {if2_ip - 1}" + f" {if2_n}\n" + ) + for i in range(existing_tunnels, n_tunnels): tmp_f1.write( f"exec set interface unnumbered ipip{i} use {if1_n}\n" f"exec set interface state ipip{i} up\n" @@ -891,55 +901,62 @@ class IPsecUtil: os.remove(tmp_fn2) return - with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec: - # Create loopback interface on DUT1, set it to up state - cmd1 = u"create_loopback" - args1 = dict( - mac_address=0 - ) - err_msg = f"Failed to create loopback interface " \ - f"on host {nodes[u'DUT1'][u'host']}" - loop_sw_if_idx = papi_exec.add(cmd1, **args1).\ - get_sw_if_index(err_msg) - cmd1 = u"sw_interface_set_flags" - args1 = dict( - sw_if_index=loop_sw_if_idx, - flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value - ) - err_msg = f"Failed to set loopback interface state up " \ - f"on host {nodes[u'DUT1'][u'host']}" - papi_exec.add(cmd1, **args1).get_reply(err_msg) - # Set IP address on VPP node 1 interface - cmd1 = u"sw_interface_add_del_address" - args1 = dict( - sw_if_index=InterfaceUtil.get_interface_index( - nodes[u"DUT1"], if1_key - ), - is_add=True, - del_all=False, - prefix=IPUtil.create_prefix_object( - if2_ip - 1, 96 if if2_ip.version == 6 else 24 + if not existing_tunnels: + with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec: + # Create loopback interface on DUT1, set it to up state + cmd1 = u"create_loopback" + args1 = dict( + mac_address=0 ) - ) - err_msg = f"Failed to set IP address on interface {if1_key} " \ - f"on host {nodes[u'DUT1'][u'host']}" - papi_exec.add(cmd1, **args1).get_reply(err_msg) - cmd4 = u"ip_neighbor_add_del" - args4 = dict( - is_add=1, - neighbor=dict( - sw_if_index=Topology.get_interface_sw_index( + err_msg = f"Failed to create loopback interface " \ + f"on host {nodes[u'DUT1'][u'host']}" + loop_sw_if_idx = papi_exec.add(cmd1, **args1).\ + get_sw_if_index(err_msg) + cmd1 = u"sw_interface_set_flags" + args1 = dict( + sw_if_index=loop_sw_if_idx, + flags=InterfaceStatusFlags.IF_STATUS_API_FLAG_ADMIN_UP.value + ) + err_msg = f"Failed to set loopback interface state up " \ + f"on host {nodes[u'DUT1'][u'host']}" + papi_exec.add(cmd1, **args1).get_reply(err_msg) + # Set IP address on VPP node 1 interface + cmd1 = u"sw_interface_add_del_address" + args1 = dict( + sw_if_index=InterfaceUtil.get_interface_index( nodes[u"DUT1"], if1_key ), - flags=1, - mac_address=str( - Topology.get_interface_mac(nodes[u"DUT2"], if2_key) - ), - ip_address=str(ip_address(if2_ip_addr)) + is_add=True, + del_all=False, + prefix=IPUtil.create_prefix_object( + if2_ip - 1, 96 if if2_ip.version == 6 else 24 + ) ) - ) - err_msg = f"Failed to add IP neighbor on interface {if1_key}" - papi_exec.add(cmd4, **args4).get_reply(err_msg) + err_msg = f"Failed to set IP address on interface {if1_key} " \ + f"on host {nodes[u'DUT1'][u'host']}" + papi_exec.add(cmd1, **args1).get_reply(err_msg) + cmd4 = u"ip_neighbor_add_del" + args4 = dict( + is_add=1, + neighbor=dict( + sw_if_index=Topology.get_interface_sw_index( + nodes[u"DUT1"], if1_key + ), + flags=1, + mac_address=str( + Topology.get_interface_mac(nodes[u"DUT2"], if2_key) + ), + ip_address=str(ip_address(if2_ip_addr)) + ) + ) + err_msg = f"Failed to add IP neighbor on interface {if1_key}" + papi_exec.add(cmd4, **args4).get_reply(err_msg) + else: + # Executor not open, as InterfaceUtil will open its own. + loop_sw_if_idx = InterfaceUtil.vpp_get_interface_sw_index( + nodes[u"DUT1"], u"loop0") + cmd1 = u"sw_interface_add_del_address" + with PapiSocketExecutor(nodes[u"DUT1"]) as papi_exec: # Configure IPsec tunnel interfaces args1 = dict( sw_if_index=loop_sw_if_idx, @@ -968,10 +985,10 @@ class IPsecUtil: ) err_msg = f"Failed to add IPsec tunnel interfaces " \ f"on host {nodes[u'DUT1'][u'host']}" - ipsec_tunnels = list() - ckeys = list() - ikeys = list() - for i in range(n_tunnels): + ipsec_tunnels = [None] * existing_tunnels + ckeys = [None] * existing_tunnels + ikeys = [None] * existing_tunnels + for i in range(existing_tunnels, n_tunnels): ckeys.append( gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg)) ) @@ -1026,7 +1043,7 @@ class IPsecUtil: ) err_msg = f"Failed to add IP routes " \ f"on host {nodes[u'DUT1'][u'host']}" - for i in range(n_tunnels): + for i in range(existing_tunnels, n_tunnels): args1[u"unnumbered_sw_if_index"] = ipsec_tunnels[i] args2[u"sw_if_index"] = ipsec_tunnels[i] args3[u"route"] = IPUtil.compose_vpp_route_structure( @@ -1041,21 +1058,22 @@ class IPsecUtil: papi_exec.get_replies(err_msg) with PapiSocketExecutor(nodes[u"DUT2"]) as papi_exec: - # Set IP address on VPP node 2 interface - cmd1 = u"sw_interface_add_del_address" - args1 = dict( - sw_if_index=InterfaceUtil.get_interface_index( - nodes[u"DUT2"], if2_key - ), - is_add=True, - del_all=False, - prefix=IPUtil.create_prefix_object( - if2_ip, 96 if if2_ip.version == 6 else 24 + if not existing_tunnels: + # Set IP address on VPP node 2 interface + cmd1 = u"sw_interface_add_del_address" + args1 = dict( + sw_if_index=InterfaceUtil.get_interface_index( + nodes[u"DUT2"], if2_key + ), + is_add=True, + del_all=False, + prefix=IPUtil.create_prefix_object( + if2_ip, 96 if if2_ip.version == 6 else 24 + ) ) - ) - err_msg = f"Failed to set IP address on interface {if2_key} " \ - f"on host {nodes[u'DUT2'][u'host']}" - papi_exec.add(cmd1, **args1).get_reply(err_msg) + err_msg = f"Failed to set IP address on interface {if2_key} " \ + f"on host {nodes[u'DUT2'][u'host']}" + papi_exec.add(cmd1, **args1).get_reply(err_msg) # Configure IPsec tunnel interfaces cmd2 = u"ipsec_tunnel_if_add_del" args2 = dict( @@ -1078,8 +1096,8 @@ class IPsecUtil: ) err_msg = f"Failed to add IPsec tunnel interfaces " \ f"on host {nodes[u'DUT2'][u'host']}" - ipsec_tunnels = list() - for i in range(n_tunnels): + ipsec_tunnels = [None] * existing_tunnels + for i in range(existing_tunnels, n_tunnels): args2[u"local_spi"] = spi_2 + i args2[u"remote_spi"] = spi_1 + i args2[u"local_ip"] = IPUtil.create_ip_address_object(if2_ip) @@ -1100,20 +1118,21 @@ class IPsecUtil: for reply in replies: if u"sw_if_index" in reply: ipsec_tunnels.append(reply[u"sw_if_index"]) - # Configure IP routes - cmd1 = u"ip_route_add_del" - route = IPUtil.compose_vpp_route_structure( - nodes[u"DUT2"], if1_ip.compressed, - prefix_len=32 if if1_ip.version == 6 else 8, - interface=if2_key, - gateway=(if2_ip - 1).compressed - ) - args1 = dict( - is_add=1, - is_multipath=0, - route=route - ) - papi_exec.add(cmd1, **args1) + if not existing_tunnels: + # Configure IP routes + cmd1 = u"ip_route_add_del" + route = IPUtil.compose_vpp_route_structure( + nodes[u"DUT2"], if1_ip.compressed, + prefix_len=32 if if1_ip.version == 6 else 8, + interface=if2_key, + gateway=(if2_ip - 1).compressed + ) + args1 = dict( + is_add=1, + is_multipath=0, + route=route + ) + papi_exec.add(cmd1, **args1) cmd1 = u"sw_interface_set_unnumbered" args1 = dict( is_add=True, @@ -1135,7 +1154,7 @@ class IPsecUtil: ) err_msg = f"Failed to add IP routes " \ f"on host {nodes[u'DUT2'][u'host']}" - for i in range(n_tunnels): + for i in range(existing_tunnels, n_tunnels): args1[u"unnumbered_sw_if_index"] = ipsec_tunnels[i] args2[u"sw_if_index"] = ipsec_tunnels[i] args3[u"route"] = IPUtil.compose_vpp_route_structure( diff --git a/resources/libraries/python/InterfaceUtil.py b/resources/libraries/python/InterfaceUtil.py index 3e2e38ef81..5724af01c0 100644 --- a/resources/libraries/python/InterfaceUtil.py +++ b/resources/libraries/python/InterfaceUtil.py @@ -1353,6 +1353,8 @@ class InterfaceUtil: def get_sw_if_index(node, interface_name): """Get sw_if_index for the given interface from actual interface dump. + FIXME: Delete and redirect callers to vpp_get_interface_sw_index. + :param node: VPP node to get interface data from. :param interface_name: Name of the specific interface. :type node: dict |